The wireless communication system's performance is greatly constrained by the wireless channel characteristics,especially in some specific environment.Therefore,signal transmission will be greatly impacted even if...The wireless communication system's performance is greatly constrained by the wireless channel characteristics,especially in some specific environment.Therefore,signal transmission will be greatly impacted even if not in a complicated topography.Testing results show that it is hardly to characterize the radio propagation properties for the antenna installed on the ground.In order to ensure a successful communication,the radio frequency(RF)wireless signal intensity monitor system was designed.We can get the wireless link transmission loss through measuring signal strength from received node.The test shows that the near-ground wireless signal propagation characteristics still can be characterized by the log distance propagation loss model.These results will conduce to studying the transmission characteristic of Near-Earth wireless signals and will predict the coverage of the earth's surface wireless sensor network.展开更多
A wireless body area network （WBAN） enables real-time monitoring of physiological signals and helps with the early detection of life-threatening diseases. WBAN nodes can be located on, inside, or in close proximity ...A wireless body area network （WBAN） enables real-time monitoring of physiological signals and helps with the early detection of life-threatening diseases. WBAN nodes can be located on, inside, or in close proximity to the body in order to detect vital signals. Measurements from sensors are processed and transmitted over wireless channels. Issues in sensing, signal processing, and com-munication have to be addressed before WBAN can be implemented. In this paper, we survey recent advances in research on sig-nal processing for the sensor measurements, and we describe aspects of communication based on IEEE 802.15.6. We also discuss state-of-the-art WBAN channel modeling in all the frequencies specified by IEEE 802.15.6 as well as the need for new channel models for new different frequencies.展开更多
When there are bigger obstacles in the indoor environment such as elevator, the radio waves basically can not penetrate it. The contribution of received signal strength by transmission and reflection will be greatly r...When there are bigger obstacles in the indoor environment such as elevator, the radio waves basically can not penetrate it. The contribution of received signal strength by transmission and reflection will be greatly reduced, and most of the time, the radio waves will reach the user by bypass diffraction. Therefore, the traditional path loss model is no longer applicable, and the improved model should be proposed. In this paper, we firstly proposed an indoor radio propagation model based on dominant path in which the received signal strength has nothing to do with the direct distance between user and access point, but is related to the length of dominant path. Then on the basis of dominant path model, the NLOS influence is considered in order to further improve the accuracy of dominant path model. Experimental results demonstrated that the proposed dominant path model can improve the accuracy of traditional path loss model remarkably.展开更多
Radio coverage directly affects the network connectivity, which is the foundational issue to ensure the normal operation of the network. Many efforts have been made to estimate the radio coverage of sensor nodes. The ...Radio coverage directly affects the network connectivity, which is the foundational issue to ensure the normal operation of the network. Many efforts have been made to estimate the radio coverage of sensor nodes. The existing approaches (often RSSI measurement-based), however, suffer from heavy measurement cost and are not well suitable for the large-scale densely deployed WSNs. NRC-Map, a novel algorithm is put forward for sensor nodes radio coverage mapping. The algorithm is based on the RSSI values collected by the neighbor nodes. According to the spatial relationship, neighbor nodes are mapping to several overlapped sectors. By use of the least squares fitting method, a log-distance path loss model is established for each sector. Then, the max radius of each sector is computed according to the path loss model and the given signal attenuation threshold. Finally, all the sectors are overlapped to estimate the node radio coverage. Experimental results show that the method is simple and effectively improve the prediction accuracy of the sensor node radio coverage.展开更多
针对煤矿井下无线信道的信号传播模型,提出将接收信号强度复合滤波器、一元线性回归测距模型和多边定位方法相结合的改进接收信号强度指示(Received Signal Strength Indicator,RSSI)值的井下定位技术,通过利用基于无线传感器网络操作系...针对煤矿井下无线信道的信号传播模型,提出将接收信号强度复合滤波器、一元线性回归测距模型和多边定位方法相结合的改进接收信号强度指示(Received Signal Strength Indicator,RSSI)值的井下定位技术,通过利用基于无线传感器网络操作系统TinyOS的节点进行离线建模、在线测算,实现煤矿井下人员及设备的实时定位。井下巷道试验表明,该技术提高了定位精度,增强了定位系统的鲁棒性,适用于煤矿井下定位。展开更多
文摘The wireless communication system's performance is greatly constrained by the wireless channel characteristics,especially in some specific environment.Therefore,signal transmission will be greatly impacted even if not in a complicated topography.Testing results show that it is hardly to characterize the radio propagation properties for the antenna installed on the ground.In order to ensure a successful communication,the radio frequency(RF)wireless signal intensity monitor system was designed.We can get the wireless link transmission loss through measuring signal strength from received node.The test shows that the near-ground wireless signal propagation characteristics still can be characterized by the log distance propagation loss model.These results will conduce to studying the transmission characteristic of Near-Earth wireless signals and will predict the coverage of the earth's surface wireless sensor network.
基金performed,in part,of the research project Medicalsensing,localization and communications using ultra widebandtechnology(MELODY)contract no.285885,and Adaptive Security forSmart Internet of Things in eHealth(ASSET)contract no.213131,whichboth are funded by the Research Council of Norway
文摘A wireless body area network （WBAN） enables real-time monitoring of physiological signals and helps with the early detection of life-threatening diseases. WBAN nodes can be located on, inside, or in close proximity to the body in order to detect vital signals. Measurements from sensors are processed and transmitted over wireless channels. Issues in sensing, signal processing, and com-munication have to be addressed before WBAN can be implemented. In this paper, we survey recent advances in research on sig-nal processing for the sensor measurements, and we describe aspects of communication based on IEEE 802.15.6. We also discuss state-of-the-art WBAN channel modeling in all the frequencies specified by IEEE 802.15.6 as well as the need for new channel models for new different frequencies.
文摘When there are bigger obstacles in the indoor environment such as elevator, the radio waves basically can not penetrate it. The contribution of received signal strength by transmission and reflection will be greatly reduced, and most of the time, the radio waves will reach the user by bypass diffraction. Therefore, the traditional path loss model is no longer applicable, and the improved model should be proposed. In this paper, we firstly proposed an indoor radio propagation model based on dominant path in which the received signal strength has nothing to do with the direct distance between user and access point, but is related to the length of dominant path. Then on the basis of dominant path model, the NLOS influence is considered in order to further improve the accuracy of dominant path model. Experimental results demonstrated that the proposed dominant path model can improve the accuracy of traditional path loss model remarkably.
文摘Radio coverage directly affects the network connectivity, which is the foundational issue to ensure the normal operation of the network. Many efforts have been made to estimate the radio coverage of sensor nodes. The existing approaches (often RSSI measurement-based), however, suffer from heavy measurement cost and are not well suitable for the large-scale densely deployed WSNs. NRC-Map, a novel algorithm is put forward for sensor nodes radio coverage mapping. The algorithm is based on the RSSI values collected by the neighbor nodes. According to the spatial relationship, neighbor nodes are mapping to several overlapped sectors. By use of the least squares fitting method, a log-distance path loss model is established for each sector. Then, the max radius of each sector is computed according to the path loss model and the given signal attenuation threshold. Finally, all the sectors are overlapped to estimate the node radio coverage. Experimental results show that the method is simple and effectively improve the prediction accuracy of the sensor node radio coverage.
基金National Science and Technology Program topics(2014BAD04B05)National Science and Technology Support Program(2012BAD28B02)Beijing Innovation Team Project(BAIC02-2016)
文摘针对煤矿井下无线信道的信号传播模型,提出将接收信号强度复合滤波器、一元线性回归测距模型和多边定位方法相结合的改进接收信号强度指示(Received Signal Strength Indicator,RSSI)值的井下定位技术,通过利用基于无线传感器网络操作系统TinyOS的节点进行离线建模、在线测算,实现煤矿井下人员及设备的实时定位。井下巷道试验表明,该技术提高了定位精度,增强了定位系统的鲁棒性,适用于煤矿井下定位。
