A microstrip loop resonator loaded with a lumped capacitor is proposed for short-range wireless power transmission applications.The overall physical dimensions of the proposed loop resonator configuration are as small...A microstrip loop resonator loaded with a lumped capacitor is proposed for short-range wireless power transmission applications.The overall physical dimensions of the proposed loop resonator configuration are as small as 3 cm by 3 cm.Power transmission efficiency of greater than 80%is achieved with a power transmission distance smaller than 5 mm via the strong coupling between two loop resonators around 1 GHz,as demonstrated by simulations and measurements.Experimental results also show that the power transmission performance is insensitive to various geometrical misalignments.The numerical and experimental results of this paper reveal a bandwidth of more than 50 MHz within which the power transmission efficiency is above 80%.As a result,the proposed microstrip loop resonator has the potential to accomplish efficient wireless power transmission and high-speed(higher than 10 Mbit/s)wireless communication simultaneously.展开更多
针对煤矿井下工作场景恶劣复杂、人员健康及环境参数监控难度大、易造成安全事故等问题,采用物联网技术,设计了一种基于无线传感器网络(Wireless Sensor Networks,WSN)和射频识别(Radio Frequency Identification,RFID)的矿井作业人员...针对煤矿井下工作场景恶劣复杂、人员健康及环境参数监控难度大、易造成安全事故等问题,采用物联网技术,设计了一种基于无线传感器网络(Wireless Sensor Networks,WSN)和射频识别(Radio Frequency Identification,RFID)的矿井作业人员健康监测系统。该系统利用WSN实时监控人体的心率、血氧及井下环境温湿度、气体浓度等数据;利用RFID技术定位井下作业人员;将所采集信息数据传输至服务器实时检测,实现安全预警并及时定位救援,从而远程监测作业人员健康。展开更多
射频识别(Radio Frequency Identification,RFID)技术作为一种无线通信技术,通过无线电波实现数据的自动识别和跟踪,已广泛应用于商品管理、供应链管理以及门禁控制等领域。随着技术的普及和应用范围的扩大,如何借助RFID技术提升通信数...射频识别(Radio Frequency Identification,RFID)技术作为一种无线通信技术,通过无线电波实现数据的自动识别和跟踪,已广泛应用于商品管理、供应链管理以及门禁控制等领域。随着技术的普及和应用范围的扩大,如何借助RFID技术提升通信数据传输的安全性,防止数据泄露、篡改或非法访问,已成为一个急需解决的问题。文章主要介绍RFID技术的基本原理和不同类型的RFID系统,明确通信数据安全传输的基本要求,包括数据的完整性、机密性以及安全认证等方面。深入探讨RFID技术在通信数据安全传输中的具体应用,包括RFID系统的安全架构设计、加密算法的选择与应用以及认证过程与协议制定,通过采取相应的安全措施,有效提升RFID系统在数据传输过程中的安全性。展开更多
The wireless communication system's performance is greatly constrained by the wireless channel characteristics,especially in some specific environment.Therefore,signal transmission will be greatly impacted even if...The wireless communication system's performance is greatly constrained by the wireless channel characteristics,especially in some specific environment.Therefore,signal transmission will be greatly impacted even if not in a complicated topography.Testing results show that it is hardly to characterize the radio propagation properties for the antenna installed on the ground.In order to ensure a successful communication,the radio frequency(RF)wireless signal intensity monitor system was designed.We can get the wireless link transmission loss through measuring signal strength from received node.The test shows that the near-ground wireless signal propagation characteristics still can be characterized by the log distance propagation loss model.These results will conduce to studying the transmission characteristic of Near-Earth wireless signals and will predict the coverage of the earth's surface wireless sensor network.展开更多
Aiming at the actual demand for monitoring environmental information,a wireless sensing system for temperature and relative humidity(RH)monitoring based on radio frequency(RF)technology and mobile network was designed...Aiming at the actual demand for monitoring environmental information,a wireless sensing system for temperature and relative humidity(RH)monitoring based on radio frequency(RF)technology and mobile network was designed.This paper introduces the architecture of the system.The system uses AVR micro controller unit(MCU),KYL-1020U RF module and SHT71 to complete real-time temperature and humidity monitoring,and uses SIM900A module to realize remote alarming and monitoring with short message system(SMS)through global system for mobile communication(GSM).Experimental results show that the designed system has good stability of measurement and real-time performance,and it can be used in some small temperature and humidity monitoring occasions.展开更多
This study proposesan over all framework for applying wireless manufacturing(WM)technologies in a smart factory and establishes a smart factory data computing and information using system (dc-IUS). Several plug-and-pl...This study proposesan over all framework for applying wireless manufacturing(WM)technologies in a smart factory and establishes a smart factory data computing and information using system (dc-IUS). Several plug-and-play (PnP) application modules of the dc-IUS are presented in the fields of machining process and quality control,material flow and inventory control,and factory resource tracking. Different schemes are discussed about how and where to apply these functions. Then some running examples are studied to demonstrate the feasibility and reliability of dc-IUS. At last,the challenges of applying WM are discussed and a conclusion is given.展开更多
The main motive of our research work is security enhancement and light energy conservation. This paper describes a study investigating the potential of a controlled office solution by integrating the Internet of Thing...The main motive of our research work is security enhancement and light energy conservation. This paper describes a study investigating the potential of a controlled office solution by integrating the Internet of Things (IoT) with wireless sensor networks (WSNs). A prototype of a smart office is developed using a global system of mobile Bluetooth and Radio Frequency Identification (RFID) technology. The user can turn on and off the fan remotely at any time. This prototype focuses on security and provides human-friendly assistance when in or out of the Office by integrating a mobile application platform. The innovative automated smart Office is designed with intelligent Security doors, lights, alarms, temperature humidifiers, and bright Liquid Crystal Display (LCD) screens for viewing. Our study has opened up virtual possibilities for producing cheap innovative frameworks in this Generation of IoT and the fifth Generation (5G) technology. Therefore, when implemented, this innovation will ease and improve human quality of life. So, this paper aims to provide a low-cost, effective Internet of the things-based automated smart Office.展开更多
为弥补传统课堂考勤机制占用上课时间,无法避免替点名现象的发生,研制了一套基于无线射频识别(RFID:Radio Frequency Identification)技术的校园课堂考勤系统。该系统结合校园中已普及的"一卡通"等学生IC卡,采用两对对射式红...为弥补传统课堂考勤机制占用上课时间,无法避免替点名现象的发生,研制了一套基于无线射频识别(RFID:Radio Frequency Identification)技术的校园课堂考勤系统。该系统结合校园中已普及的"一卡通"等学生IC卡,采用两对对射式红外传感器和FM1702SL无线射频读卡器相结合方式,获取上课学生的姓名、学号和进出教室状态等信息,并通过nRF24L01无线传输模块和FT232RL电平转换电路,将信息传输到上位机。上位机通过由Visual Basic语言编写的软件程序,自动统计和整理信息,并生成学生平时成绩,免去了教师手动统计的负担。对101名学生代刷卡的违规操作及82名学生正常刷卡操作进行测试,结果显示,违规进出学生人数为98人,正常刷卡人数为81人,相对误差均小于3%。展开更多
基金the National Natural Science Foundation of China under Grant No.61871220.
文摘A microstrip loop resonator loaded with a lumped capacitor is proposed for short-range wireless power transmission applications.The overall physical dimensions of the proposed loop resonator configuration are as small as 3 cm by 3 cm.Power transmission efficiency of greater than 80%is achieved with a power transmission distance smaller than 5 mm via the strong coupling between two loop resonators around 1 GHz,as demonstrated by simulations and measurements.Experimental results also show that the power transmission performance is insensitive to various geometrical misalignments.The numerical and experimental results of this paper reveal a bandwidth of more than 50 MHz within which the power transmission efficiency is above 80%.As a result,the proposed microstrip loop resonator has the potential to accomplish efficient wireless power transmission and high-speed(higher than 10 Mbit/s)wireless communication simultaneously.
文摘针对煤矿井下工作场景恶劣复杂、人员健康及环境参数监控难度大、易造成安全事故等问题,采用物联网技术,设计了一种基于无线传感器网络(Wireless Sensor Networks,WSN)和射频识别(Radio Frequency Identification,RFID)的矿井作业人员健康监测系统。该系统利用WSN实时监控人体的心率、血氧及井下环境温湿度、气体浓度等数据;利用RFID技术定位井下作业人员;将所采集信息数据传输至服务器实时检测,实现安全预警并及时定位救援,从而远程监测作业人员健康。
文摘射频识别(Radio Frequency Identification,RFID)技术作为一种无线通信技术,通过无线电波实现数据的自动识别和跟踪,已广泛应用于商品管理、供应链管理以及门禁控制等领域。随着技术的普及和应用范围的扩大,如何借助RFID技术提升通信数据传输的安全性,防止数据泄露、篡改或非法访问,已成为一个急需解决的问题。文章主要介绍RFID技术的基本原理和不同类型的RFID系统,明确通信数据安全传输的基本要求,包括数据的完整性、机密性以及安全认证等方面。深入探讨RFID技术在通信数据安全传输中的具体应用,包括RFID系统的安全架构设计、加密算法的选择与应用以及认证过程与协议制定,通过采取相应的安全措施,有效提升RFID系统在数据传输过程中的安全性。
文摘The wireless communication system's performance is greatly constrained by the wireless channel characteristics,especially in some specific environment.Therefore,signal transmission will be greatly impacted even if not in a complicated topography.Testing results show that it is hardly to characterize the radio propagation properties for the antenna installed on the ground.In order to ensure a successful communication,the radio frequency(RF)wireless signal intensity monitor system was designed.We can get the wireless link transmission loss through measuring signal strength from received node.The test shows that the near-ground wireless signal propagation characteristics still can be characterized by the log distance propagation loss model.These results will conduce to studying the transmission characteristic of Near-Earth wireless signals and will predict the coverage of the earth's surface wireless sensor network.
文摘Aiming at the actual demand for monitoring environmental information,a wireless sensing system for temperature and relative humidity(RH)monitoring based on radio frequency(RF)technology and mobile network was designed.This paper introduces the architecture of the system.The system uses AVR micro controller unit(MCU),KYL-1020U RF module and SHT71 to complete real-time temperature and humidity monitoring,and uses SIM900A module to realize remote alarming and monitoring with short message system(SMS)through global system for mobile communication(GSM).Experimental results show that the designed system has good stability of measurement and real-time performance,and it can be used in some small temperature and humidity monitoring occasions.
基金National Natural Science Foundation of China(No.50875204)National Basic Research "973" Project(No.2011CB706805)
文摘This study proposesan over all framework for applying wireless manufacturing(WM)technologies in a smart factory and establishes a smart factory data computing and information using system (dc-IUS). Several plug-and-play (PnP) application modules of the dc-IUS are presented in the fields of machining process and quality control,material flow and inventory control,and factory resource tracking. Different schemes are discussed about how and where to apply these functions. Then some running examples are studied to demonstrate the feasibility and reliability of dc-IUS. At last,the challenges of applying WM are discussed and a conclusion is given.
文摘The main motive of our research work is security enhancement and light energy conservation. This paper describes a study investigating the potential of a controlled office solution by integrating the Internet of Things (IoT) with wireless sensor networks (WSNs). A prototype of a smart office is developed using a global system of mobile Bluetooth and Radio Frequency Identification (RFID) technology. The user can turn on and off the fan remotely at any time. This prototype focuses on security and provides human-friendly assistance when in or out of the Office by integrating a mobile application platform. The innovative automated smart Office is designed with intelligent Security doors, lights, alarms, temperature humidifiers, and bright Liquid Crystal Display (LCD) screens for viewing. Our study has opened up virtual possibilities for producing cheap innovative frameworks in this Generation of IoT and the fifth Generation (5G) technology. Therefore, when implemented, this innovation will ease and improve human quality of life. So, this paper aims to provide a low-cost, effective Internet of the things-based automated smart Office.
文摘为弥补传统课堂考勤机制占用上课时间,无法避免替点名现象的发生,研制了一套基于无线射频识别(RFID:Radio Frequency Identification)技术的校园课堂考勤系统。该系统结合校园中已普及的"一卡通"等学生IC卡,采用两对对射式红外传感器和FM1702SL无线射频读卡器相结合方式,获取上课学生的姓名、学号和进出教室状态等信息,并通过nRF24L01无线传输模块和FT232RL电平转换电路,将信息传输到上位机。上位机通过由Visual Basic语言编写的软件程序,自动统计和整理信息,并生成学生平时成绩,免去了教师手动统计的负担。对101名学生代刷卡的违规操作及82名学生正常刷卡操作进行测试,结果显示,违规进出学生人数为98人,正常刷卡人数为81人,相对误差均小于3%。
