In order to reduce power consumption of sensor nodes and extend network survival time in the wireless sensor network （WSN）, sensor nodes are scheduled in an active or dormant mode. A chain-type WSN is fundamental y ...In order to reduce power consumption of sensor nodes and extend network survival time in the wireless sensor network （WSN）, sensor nodes are scheduled in an active or dormant mode. A chain-type WSN is fundamental y different from other types of WSNs, in which the sensor nodes are deployed along elongated geographic areas and form a chain-type network topo-logy structure. This paper investigates the node scheduling prob-lem in the chain-type WSN. Firstly, a node dormant scheduling mode is analyzed theoretical y from geographic coverage, and then three neighboring nodes scheduling criteria are proposed. Sec-ondly, a hybrid coverage scheduling algorithm and dead areas are presented. Final y, node scheduling in mine tunnel WSN with uniform deployment （UD）, non-uniform deployment （NUD） and op-timal distribution point spacing （ODS） is simulated. The results show that the node scheduling with UD and NUD, especial y NUD, can effectively extend the network survival time. Therefore, a strat-egy of adding a few mobile nodes which activate the network in dead areas is proposed, which can further extend the network survival time by balancing the energy consumption of nodes.展开更多
This paper studies a queueing model with the finite buffer of capacity K in wireless cellular networks, which has two types of arriving calls--handoff and originating calls, both of which follow the Markov arriving pr...This paper studies a queueing model with the finite buffer of capacity K in wireless cellular networks, which has two types of arriving calls--handoff and originating calls, both of which follow the Markov arriving process with different rates. The channel holding times of the two types of calls follow different phase-type distributions. Firstly, the joint distribution of two queue lengths is derived, and then the dropping and blocking probabilities, the mean queue length and the mean waiting time from the joint distribution are gotten. Finally, numerical examples show the impact of different call arrival rates on the performance measures.展开更多
在激光无线能量传输中,由于瞄准系统误差和物体遮挡的影响,光电池阵列接收到的激光辐照分布不均匀,导致光电池阵列组串内的电池间出现电流失配,输出功率下降。针对该问题,采用分布式最大功率点追踪(Distributed Maximum Power Point Tra...在激光无线能量传输中,由于瞄准系统误差和物体遮挡的影响,光电池阵列接收到的激光辐照分布不均匀,导致光电池阵列组串内的电池间出现电流失配,输出功率下降。针对该问题,采用分布式最大功率点追踪(Distributed Maximum Power Point Tracking,DMPPT)技术,减少光电池阵列组串内的电池间电流失配,并用并联型Boost(PT-Boost)电路替代传统Boost电路,降低DC/DC转换器的输入电流纹波,使DMPPT系统获得高追踪效率。实验结果表明,相较于传统Boost电路,PT-Boost电路的追踪效率提高3.6%,达到93.5%。在上述研究的基础上,设置了遮光率分别为0%、25%和50%的激光无线能量传输场景,DMPPT系统整体效率分别达到了93%、92.6%和90.3%。该研究结果对激光辐照不均匀场景下激光无线能量传输的最大功率点追踪指导意义。展开更多
基金supported by the China Doctoral Discipline New Teacher Foundation(200802901507)the Sichuan Province Basic Research Plan Project(2013JY0165)the Cultivating Programme of Excellent Innovation Team of Chengdu University of Technology(KYTD201301)
文摘In order to reduce power consumption of sensor nodes and extend network survival time in the wireless sensor network （WSN）, sensor nodes are scheduled in an active or dormant mode. A chain-type WSN is fundamental y different from other types of WSNs, in which the sensor nodes are deployed along elongated geographic areas and form a chain-type network topo-logy structure. This paper investigates the node scheduling prob-lem in the chain-type WSN. Firstly, a node dormant scheduling mode is analyzed theoretical y from geographic coverage, and then three neighboring nodes scheduling criteria are proposed. Sec-ondly, a hybrid coverage scheduling algorithm and dead areas are presented. Final y, node scheduling in mine tunnel WSN with uniform deployment （UD）, non-uniform deployment （NUD） and op-timal distribution point spacing （ODS） is simulated. The results show that the node scheduling with UD and NUD, especial y NUD, can effectively extend the network survival time. Therefore, a strat-egy of adding a few mobile nodes which activate the network in dead areas is proposed, which can further extend the network survival time by balancing the energy consumption of nodes.
基金supported by the Postgraduate Innovation Project of Jiangsu University (CX10B 003X)
文摘This paper studies a queueing model with the finite buffer of capacity K in wireless cellular networks, which has two types of arriving calls--handoff and originating calls, both of which follow the Markov arriving process with different rates. The channel holding times of the two types of calls follow different phase-type distributions. Firstly, the joint distribution of two queue lengths is derived, and then the dropping and blocking probabilities, the mean queue length and the mean waiting time from the joint distribution are gotten. Finally, numerical examples show the impact of different call arrival rates on the performance measures.
文摘在激光无线能量传输中,由于瞄准系统误差和物体遮挡的影响,光电池阵列接收到的激光辐照分布不均匀,导致光电池阵列组串内的电池间出现电流失配,输出功率下降。针对该问题,采用分布式最大功率点追踪(Distributed Maximum Power Point Tracking,DMPPT)技术,减少光电池阵列组串内的电池间电流失配,并用并联型Boost(PT-Boost)电路替代传统Boost电路,降低DC/DC转换器的输入电流纹波,使DMPPT系统获得高追踪效率。实验结果表明,相较于传统Boost电路,PT-Boost电路的追踪效率提高3.6%,达到93.5%。在上述研究的基础上,设置了遮光率分别为0%、25%和50%的激光无线能量传输场景,DMPPT系统整体效率分别达到了93%、92.6%和90.3%。该研究结果对激光辐照不均匀场景下激光无线能量传输的最大功率点追踪指导意义。
