Determination of the Minimum Testing Time for Wireline Formation Testing with the Finite Element Method

The wireline formation tester （WFT） is an important tool for formation evaluation, such as calculating the formation pressure and permeability, identifying the fluid type, and determining the interface between oil and water. However, in a low porosity and low permeability formation, the supercharge pressure effect exists, since the mudcake has a poor sealing ability. The mudcake cannot isolate the hydrostatic pressure of the formation around the borehole and the mud seeps into the formations, leading to inaccurate formation pressure measurement. At the same time, the tool can be easily stuck in the low porosity/low permeability formation due to the long waiting and testing time. We present a method for determining the minimum testing time for the wireline formation tester. The pressure distribution of the mudcake and the formation were respectively calculated with the finite element method （FEM）. The radius of the influence of mud pressure was also computed, and the minimum testing time in low porosity/low permeability formations was determined within a range of values for different formation permeabilities. The determination of the minimum testing time ensures an accurate formation pressure measurement and minimizes possible accidents due to long waiting and testing time.

Research on Pore Pressure-Depth Characteristics in Normal Pressure Reservoir, Bohai Sea Oilfield

In normal pressure of reservoir, formation pressure and depth can not fully reflect the linear relationship between the formation pressure with depth, the change rule of reservoir measured formation pressure and often reduced pressure, understanding unclear cause fluid properties. By introducing basic principles of hydrostatics. The relationship between pressure coefficient and mathematical depth is discussed by mathematical induction analysis of measured pressure data of nearly 50 normal pressure reservoirs in Bohai Oilfield. The results show that the reservoir pressure data is linearly distributed with depth, and the pressure coefficient is inversely proportional to depth. When the depth becomes shallower, the pressure coefficient increases and approaches the reservoir level. As the depth increases, the pressure coefficient decreases and approaches the hydrostatic pressure coefficient infinitely. The study can more accurately analyze the reservoir pressure changes, which is helpful to study the oil and water distribution, reservoir connectivity and fluid properties of atmospheric pressure reservoirs.

Harnessing deep transient testing for reservoir characterization and CO_(2) emission reduction in challenging geological settings

This paper provides a comprehensive overview of Deep Transient Testing(DTT),a cutting-edge technique for reservoir characterization that has revolutionized the oil and gas industry.The main aim of DTT is to characterize the reservoir with a deeper radius of investigation.The optimization of the radius of investigation with the DTT approach is studied in detail.Reveal is a commercial numerical simulation application used to simulate the DTT process and evaluate the pressure wave analysis in the porous media.The main aim of the simulation is to understand the impact of the reservoir quality on the pressure response and use it to address the noise-to-pule ratio,which is a determinantal parameter in testing duration.The tested wells with the DTT tool show that measured well productivity can deliver the minimum commercial rate.The has been delivered within 2 days compared to the potential test time of 21 days which saved the 19 rig days and contributed to C02 emission reduction of(gas flaring 1340+rig emission 600)1940 Metric tons equivalent to 421 cars emission in a year.However,DTT also presents certain limitations,such as the requirement for specialized equipment and expertise,as well as the potential for formation damage during testing.This study provides a detailed description of the DTT technique,encompassing its history,theory,and practical applications.Furthermore,it discusses the benefits and limitations of DTT and presents case studies to illustrate its effectiveness across various reservoir types.Overall,this study serves as a valuable resource for reservoir engineers,geologists,and other professionals involved in the exploration and production of oil and gas.