An investigation is described in which various polyfunctional elastomers( cationic methylaminopolysiloxane,nonic concentrated glyoxal resin and anionicpolyurethane etc. ) were applied on silk,wool and silk/ wool blend...An investigation is described in which various polyfunctional elastomers( cationic methylaminopolysiloxane,nonic concentrated glyoxal resin and anionicpolyurethane etc. ) were applied on silk,wool and silk/ wool blend fabrics forimprovement wrinkle recovery.A study on this paper describes wrinkle recovery oftreated fabrics by the thermobench method,and ascertains reason which elastomerimproves wrinkle recovery of silk and silk/ wool blend fabrics according as results ofthe DSC,the SEM and the acid or alkali resistance.展开更多
The wrinking properties of light-weight woven fabrics mabe from wool and a range ofwool/silk blends have been assessed using the“Thermobench”test method.The effects ofageing/annealing,and of interyarn and interfibre...The wrinking properties of light-weight woven fabrics mabe from wool and a range ofwool/silk blends have been assessed using the“Thermobench”test method.The effects ofageing/annealing,and of interyarn and interfibre friction,have been compared for the vani-ous fabrics.The results of attemps to improve wrinkle recovery by chemical modification arepresented,and possible directions for future work are considered.展开更多
Wool & silk blended fancy suiting is desinged. Through trial-production with silk sliver and Australian wool top, the spinning technology is investigated, and the relationship of spinning technology, blending rati...Wool & silk blended fancy suiting is desinged. Through trial-production with silk sliver and Australian wool top, the spinning technology is investigated, and the relationship of spinning technology, blending ratio and yarn construction is discussed.展开更多
The principles for the modulus method and the percentage method are established and discussed in the part following Part Ⅰ of the series papers, in which we proposed the various algorithms of the strength method and ...The principles for the modulus method and the percentage method are established and discussed in the part following Part Ⅰ of the series papers, in which we proposed the various algorithms of the strength method and the work method. The samples of Wool/PET blended fibre bundles, the method of fibre-bundle tensile tests and the typical specific stress-extension curves from the fibre bundles with different blend ratios are the same as in Part Ⅰ. It can be found that the theoretical results estimated by the modulus and percentage methods accord with the experimental values highly though the calculations of the two methods are slightly more complex than those of the strength and work methods. Especially, using the modulus method can not only avoid the influence of the error caused by the determination of the tensile curve of no fibre breaking in stretching, Y(e), but also need not to know the tensile curves of mono-component fibre bundles in certain calculation. The latter advantage of the modulus method exists in the percentage method too, but it should adopt the improved calculation of ones.展开更多
The algorithms of the strength, work, modulus and percentage methods have been introduced and discussed in Part Ⅰ and Part Ⅱ of the series papers. As the following, the percentage-function calculation and the freque...The algorithms of the strength, work, modulus and percentage methods have been introduced and discussed in Part Ⅰ and Part Ⅱ of the series papers. As the following, the percentage-function calculation and the frequency-function calculation of the definition method are defined and developed in detail. Meanwhile, the procedures to find the tensile parameters are analysed experimentally and involve “ED” being the average values of the corresponding tensile parameters of each bundle tensile curve measured; “EC” being the tensile parameters obtained from the averaged experimental tensile curve; and “TC” being the parameters of the theoretical tensile curve according to the corresponding nominal blend ratio. The theoretical and experimental results indicate that the blend ratio estimated by the definition method from wool/polyester blended fibre bundles has a high correlation with the actual blend ratio though the variables to be known in this method are the most of all the methods and there exist the difficulty to solve fibre bundle tensile behaviour without fibre broken in accuracy and that there are high correlations between the EC and TC data and the tensile parameters should be calculated using the EC method rather than the ED method with the exception of the bundle initial modulus. The relationships between blend ratios and the tensile properties of blended fibre bundles can be used to select the optimum blend ratio of blended tops or yarns.展开更多
文摘An investigation is described in which various polyfunctional elastomers( cationic methylaminopolysiloxane,nonic concentrated glyoxal resin and anionicpolyurethane etc. ) were applied on silk,wool and silk/ wool blend fabrics forimprovement wrinkle recovery.A study on this paper describes wrinkle recovery oftreated fabrics by the thermobench method,and ascertains reason which elastomerimproves wrinkle recovery of silk and silk/ wool blend fabrics according as results ofthe DSC,the SEM and the acid or alkali resistance.
文摘The wrinking properties of light-weight woven fabrics mabe from wool and a range ofwool/silk blends have been assessed using the“Thermobench”test method.The effects ofageing/annealing,and of interyarn and interfibre friction,have been compared for the vani-ous fabrics.The results of attemps to improve wrinkle recovery by chemical modification arepresented,and possible directions for future work are considered.
文摘Wool & silk blended fancy suiting is desinged. Through trial-production with silk sliver and Australian wool top, the spinning technology is investigated, and the relationship of spinning technology, blending ratio and yarn construction is discussed.
文摘The principles for the modulus method and the percentage method are established and discussed in the part following Part Ⅰ of the series papers, in which we proposed the various algorithms of the strength method and the work method. The samples of Wool/PET blended fibre bundles, the method of fibre-bundle tensile tests and the typical specific stress-extension curves from the fibre bundles with different blend ratios are the same as in Part Ⅰ. It can be found that the theoretical results estimated by the modulus and percentage methods accord with the experimental values highly though the calculations of the two methods are slightly more complex than those of the strength and work methods. Especially, using the modulus method can not only avoid the influence of the error caused by the determination of the tensile curve of no fibre breaking in stretching, Y(e), but also need not to know the tensile curves of mono-component fibre bundles in certain calculation. The latter advantage of the modulus method exists in the percentage method too, but it should adopt the improved calculation of ones.
文摘The algorithms of the strength, work, modulus and percentage methods have been introduced and discussed in Part Ⅰ and Part Ⅱ of the series papers. As the following, the percentage-function calculation and the frequency-function calculation of the definition method are defined and developed in detail. Meanwhile, the procedures to find the tensile parameters are analysed experimentally and involve “ED” being the average values of the corresponding tensile parameters of each bundle tensile curve measured; “EC” being the tensile parameters obtained from the averaged experimental tensile curve; and “TC” being the parameters of the theoretical tensile curve according to the corresponding nominal blend ratio. The theoretical and experimental results indicate that the blend ratio estimated by the definition method from wool/polyester blended fibre bundles has a high correlation with the actual blend ratio though the variables to be known in this method are the most of all the methods and there exist the difficulty to solve fibre bundle tensile behaviour without fibre broken in accuracy and that there are high correlations between the EC and TC data and the tensile parameters should be calculated using the EC method rather than the ED method with the exception of the bundle initial modulus. The relationships between blend ratios and the tensile properties of blended fibre bundles can be used to select the optimum blend ratio of blended tops or yarns.
