A Review on Technologies for the Use of CO2 as a Working Fluid in Refrigeration and Power Cycles

The use of carbon dioxide as a working fluid has been the subject of extensive studies in recent years, particularly in the field of refrigeration where it is at the heart of research to replace CFC and HCFC. Its thermodynamic properties make it a fluid of choice in the efficient use of energy at low and medium temperatures in engine cycles. However, the performance of transcritical CO2 cycles weakens under high temperature and pressure conditions, especially in refrigeration systems;On the other hand, this disadvantage becomes rather interesting in engine cycles where CO2 can be used as an alternative to the organic working fluid in small and medium-sized electrical systems for low quality or waste heat sources. In order to improve the performance of systems operating with CO2 in the field of refrigeration and electricity production, research has made it possible to develop several concepts, of which this article deals with a review of the state of the art, followed by analyzes in-depth and critical of the various developments to the most recent modifications in these fields. Detailed discussions on the performance and technical characteristics of the different evolutions are also highlighted as well as the factors affecting the overall performance of the systems studied. Finally, perspectives on the future development of the use of CO2 in these different cycles are presented.

The action mechanism of the work done by the electric field force on moving charges to stimulate the emergence of carrier generation/recombination in a PN junction

It is discovered that the product of the current and the electric field in a PN junction should be regarded as the rate of work(power)done by the electric field force on moving charges(hole current and electron current),which was previously misinterpreted as solely a Joule heating effect.We clarify that it is exactly the work done by the electric field force on the moving charges to stimulate the emergence of non-equilibrium carriers,which triggers the novel physical phenomena.As regards to Joule heat,we point out that it should be calculated from Ohm’s law,rather than simply from the product of the current and the electric field.Based on this understanding,we conduct thorough discussion on the role of the electric field force in the process of carrier recombination and carrier generation.The thermal effects of carrier recombination and carrier generation followed are incorporated into the thermal equation of energy.The present study shows that the exothermic effect of carrier recombination leads to a temperature rise at the PN interface,while the endothermic effect of carrier generation causes a temperature reduction at the interface.These two opposite effects cause opposite heat flow directions in the PN junction under forward and backward bias voltages,highlighting the significance of managing device heating phenomena in design considerations.Therefore,this study possesses referential significance for the design and tuning on the performance of piezotronic devices.

Flow characteristics and hot workability of a typical low-alloy high-strength steel during multi-pass deformation

Heavy components of low-alloy high-strength(LAHS) steels are generally formed by multi-pass forging. It is necessary to explore the flow characteristics and hot workability of LAHS steels during the multi-pass forging process, which is beneficial to the formulation of actual processing parameters. In the study, the multi-pass hot compression experiments of a typical LAHS steel are carried out at a wide range of deformation temperatures and strain rates. It is found that the work hardening rate of the experimental material depends on deformation parameters and deformation passes, which is ascribed to the impacts of static and dynamic softening behaviors. A new model is established to describe the flow characteristics at various deformation passes. Compared to the classical Arrhenius model and modified Zerilli and Armstrong model, the newly proposed model shows higher prediction accuracy with a confidence level of 0.98565. Furthermore, the connection between power dissipation efficiency(PDE) and deformation parameters is revealed by analyzing the microstructures. The PDE cannot be utilized to reflect the efficiency of energy dissipation for microstructure evolution during the entire deformation process, but only to assess the efficiency of energy dissipation for microstructure evolution in a specific deformation parameter state.As a result, an integrated processing map is proposed to better study the hot workability of the LAHS steel, which considers the effects of instability factor(IF), PDE, and distribution and size of grains. The optimized processing parameters for the multi-pass deformation process are the deformation parameters of 1223–1318 K and 0.01–0.08 s^(-1). Complete dynamic recrystallization occurs within the optimized processing parameters with an average grain size of 18.36–42.3 μm. This study will guide the optimization of the forging process of heavy components.

Formulation of Work-Study Combined and Result-Oriented Integrated Curriculum Standards

According to the Annex Technical Regulations for Integrated Curriculum Development(Trial)in Document No.30 of the General Office of the Ministry of Human Resources and Social Security(2012),this paper studies the formulation of the curriculum standards for the integration of Chinese medicinal materials production.We focus on the formulation ideas of the curriculum standards for the integration of Chinese medicinal materials production,the formulation process of the curriculum standards for the integration of Chinese medicinal materials production,including the description of typical work tasks,the determination of curriculum objectives,the analysis of study content,the description of referential study tasks,teaching implementation suggestions,assessment and evaluation suggestions,which can provide a reference for the development and research of other related integrated courses.

Design and optimization of fluid lubricated bearings operated with extreme working performances——a comprehensive review

Fluid lubricated bearings have been widely adopted as support components for high-end equipment in metrology,semiconductor devices,aviation,strategic defense,ultraprecision manufacturing,medical treatment,and power generation.In all these applications,the equipment must deliver extreme working performances such as ultraprecise movement,ultrahigh rotation speed,ultraheavy bearing loads,ultrahigh environmental temperatures,strong radiation resistance,and high vacuum operation,which have challenged the design and optimization of reliable fluid lubricated bearings.Breakthrough of any related bottlenecks will promote the development course of high-end equipment.To promote the advancement of high-end equipment,this paper reviews the design and optimization of fluid lubricated bearings operated at typical extreme working performances,targeting the realization of extreme working performances,current challenges and solutions,underlying deficiencies,and promising developmental directions.This paper can guide the selection of suitable fluid lubricated bearings and optimize their structures to meet their required working performances.

Evaluation of the Living Conditions and Health Perceptions of Waste Electrical and Electronic Equipment Handlers in the Informal Sector in Dakar

Electrical and electronic devices are becoming an increasingly important part of our society. In Africa, and in Senegal in particular, the handling and management of electronic and electrical equipment (EEE) that has reached the end of its life is mainly informal. This professional environment is characterized by the disintegration of the sector and the social heterogeneity that can be found there. The objective of this study is to assess the standard of living of electrical and electronic equipment waste handlers in the Dakar region, as well as their perception of their health. A survey was used to obtain information on sociodemographic background, living arrangements, perception of health status, and good practices to be implemented in case of work-related health problems. Life style, perception of general health and health problems were ranged as excellent, very good, good, average and poor. Informal recyclers in the Dakar region lived mainly in rooms and buildings as tenants (49.1%), or in family homes (48.4%) before starting this activity, and 51.2% continue to live in rooms and buildings as tenants compared to 41.4% who still live in a family home. The perception of health status ranged from poor to excellent, and 4.9% believe that they are limited in work due to a disability or health problem. Informal work is a heterogeneous phenomenon that makes research and policymaking particularly complex. There are several external factors within informal WEEE re-cyclers that can cause health problems or functional disability. However, the living conditions and the perception they have of their state of health are contradictory to the working conditions and the social environment to which they belong. A biomedical approach would consolidate these achievements by confirming or invalidating them.

Determinants of Satisfaction at Work and Its Reflections on Performance

This study examines the relationship between job satisfaction and performance,investigating personality traits and satisfaction aspects among employees of a Federal Higher Education Institution.A questionnaire was administered to 658 participants,using structural equation modeling for analysis.Results highlighted that challenging work,neuroticism,and self-esteem significantly influenced overall workplace satisfaction,while general satisfaction,self-efficacy,and lack of attention were key determinants of work performance.This emphasizes the importance for managers to prioritize factors enhancing employee satisfaction,as it positively correlates with job performance.

The Impact of the Digital Economy on Rural Residents’Working Hours:Mechanisms and Empirical Evidence

The rapid development of the digital economy has provided a new impetus for rural residents to extend their working hours.Based on the data collected by the China Labor-force Dynamics Survey(CLDS)in 2014,2016,and 2018,this paper measured the development level of the digital economy in China from the perspectives of internet development and digital financial inclusion,and tested the mechanisms of how the digital economy affected rural residents’working hours.The results showed that the digital economy extended rural residents’working hours by expanding information channels and enhancing human capital,and this mechanism was affected by heterogeneity in rural residents’educational background,age,and social capital.Building on these findings,this paper holds that to increase rural residents’income by extending their working hours and achieving common prosperity for all,it is necessary to expand the opportunities for rural residents to participate in skills training and promote their accumulation of human capital.

Correlation of work function and stacking fault energy through Kelvin probe force microscopy and nanohardness in diluteα-magnesium

Electronic interactions of the Group 2A elements with magnesium have been studied through the dilute solid solutions in binary Mg-Ca,Mg-Sr and Mg-Ba systems.This investigation incorporated the difference in the‘Work Function'(ΔWF)measured via Kelvin Probe Force Microscopy(KPFM),as a property directly affected by interatomic bond types,i.e.the electronic structure,nanoindentation measurements,and Stacking Fault Energy values reported in the literature.It was shown that the nano-hardness of the solid-solutionα-Mg phase changed in the order of Mg-Ca>Mg-Sr>Mg-Ba.Thus,it was shown,by also considering the nano-hardness levels,that SFE of a solid-solution is closely correlated with its‘Work Function'level.Nano-hardness measurements on the eutectics andΔWF difference between eutectic phases enabled an assessment of the relative bond strength and the pertinent electronic structures of the eutectics in the three alloys.Correlation withΔWF and at least qualitative verification of those computed SFE values with some experimental measurement techniques were considered important as those computational methods are based on zero Kelvin degree,relatively simple atomic models and a number of assumptions.As asserted by this investigation,if the results of measurement techniques can be qualitatively correlated with those of the computational methods,it can be possible to evaluate the electronic structures in alloys,starting from binary systems,going to ternary and then multi-elemental systems.Our investigation has shown that such a qualitative correlation is possible.After all,the SFE values are not treated as absolute values but rather become essential in comparative investigations when assessing the influences of alloying elements at a fundamental level,that is,free electron density distributions.Our study indicated that the principles of‘electronic metallurgy'in developing multi-elemental alloy systems can be followed via practical experimental methods,i.e.ΔWF measurements using KPFM and nanoindentation.

Profile of Factors of Arduous Work among Healthcare Professionals in Healthcare Facilities in Northern Benin in 2021

Introduction: Work environments create the basis for arduous nursing work. This is what led us to research the factors of arduousness in the exercise of the health profession in North Benin, through this study. Methods: This is a cross-sectional and descriptive study which focused on health professionals in the health zones of Parakou-N’dali and Tchaourou. The sampling was an exhaustive census. All health workers who had given their free and informed consent were included. The data was collected using a questionnaire. The variables studied were the factors of arduous work and socio-professional characteristics. The data collected was processed and analyzed with the Epi info 7.2.0.1 software. Results: A total of 692 were surveyed, the participation rate was 85.11% and the sex ratio (M/F) equal to 0.7. The average age was 38 years old. Nurses made up 32.66% of the sample. They were 86.42% subject to night work and 82.66% to alternating work. Overall, 70.23% worked more than 40 hours per week. Between 78.12% and 96.46% of non-specialist doctors, nurses, midwives and biomedical analysis technicians were required to work night shifts. Nurses, midwives, radiology and laboratory technicians were between 89.53% and 97.35%, organized in alternating work. In the sample, 55.20% complained about the insufficient number of work materials, 26.29% handled harmful chemical substances. Among those surveyed, 58.14% had been attacked. Conclusion: All professional categories of caregivers are subject to arduous work. Measures are needed to reverse the situation.

Research on the Ideological and Political Work of Nursing Students in the New Era under the Strategy of Healthy China

Nursing students have uniqueness within the general university student population as they are among the primary practitioners of the “Healthy China Strategy 2030” and guardians of people’s health. Innovating and strengthening ideological and political education for nursing students, enhancing their skills in serving the people, is a significant political task for medical universities. Against the backdrop of the “Healthy China Strategy,” how to effectively improve nursing students’ professional competencies, integrate life education, medical humanities education, and general ideological and political education, and utilize life education to construct a more suitable ideological and political education system for nursing students, in order to better establish correct worldviews, values, and professional outlooks, are urgent practical issues that need to be addressed in ideological and political education in medical universities. This article takes life education as an entry point and focuses on integrating it with the internalization and unification of ideological and political education courses, aiming to explore the possibilities and new pathways for integrating life education into the ideological and political education of nursing students in the new era.

Examining the Interplay between Trait Mindfulness and Thriving at Work among Teachers in Western China:The Mediating Role of General Self-Efficacy

This study explores the nuanced relationship between trait mindfulness and thriving at work among educators in Western China,emphasizing the mediating role of general self-efficacy.Employing a sample of 378 primary and secondary school teachers,this research utilizes the Five Facet Mindfulness Questionnaire(FFMQ),Thriving at Work Scale(TWS),and the General Self-Efficacy Scale(GSES)to conduct a thorough investigation.The findings indicate a significant positive correlation between trait mindfulness and thriving at work,between trait mindfulness and general self-efficacy,and between general self-efficacy and thriving at work.Additionally,trait mindfulness was found to have a positive predictive effect on both thriving at work and general self-efficacy,with general self-efficacy also showing a positive predictive effect on thriving at work.Importantly,general self-efficacy was identified as playing a partial mediating role in the relationship between trait mindfulness and thriving at work.These results underscore the importance of cultivating mindfulness and self-efficacy among teachers to enhance their enthusiasm for work,suggesting potential pathways for professional development and well-being in the educational sector.

A Study on the Work Process-Based Practical Training Model for Basic Nursing Skills in Vocational Colleges

Objective:To explore and analyze the work process-based practical training teaching model for basic nursing skills in vocational colleges and its implementation effects.Methods:A total of 82 nursing students from our school were selected for the study,which was conducted from April 2023 to April 2024.Using a random number table method,the students were divided into an observation group and a control group,each with 41 students.The control group received conventional practical training teaching,while the observation group followed the work process-based practical training model for basic nursing skills.The assessment scores and teaching satisfaction of the two groups were compared.Results:The comparison of assessment scores showed that the observation group performed significantly better than the control group(P<0.05).The comparison of teaching satisfaction also indicated that the observation group had significantly higher satisfaction than the control group(P<0.05).Conclusion:The work process-based practical training teaching model for basic nursing skills in vocational colleges can improve students’assessment scores and enhance teaching satisfaction,demonstrating its value for wider application.

Flexible Fixture Design for the Top and End Surface Processing of NP2_NP4 Cylinder Heads

This paper focuses on the design of fixtures for NP2 and NP4 cylinder heads on a horizontal machining center of flexible machining automatic lines.It began with an analysis of the diagrams of part processing and working procedure which formed the basis for the design of the processing technology scheme,a selection of suitable machine tools,and the setting of processing parameters.Fixtures tailored to the chosen machine tools were then designed to meet the processing requirements.Additional aspects of the project included the design of part drawings,calculation of working time quota,design of auxiliary guides,support clamping,and hydraulic circuits,all aimed at fulfilling practical production requirements.

Determinants of Breastfeeding Practices among Working Mothers in Solwezi District of Zambia

Background: As one of the strategies to reduce infant morbidity and mortality, the World Health Organization recommends early initiation of exclusive breastfeeding and timely introduction of complementary feeding with continued breastfeeding for up to two years or beyond. Although breastfeeding is a natural process, it is influenced by different socio-cultural factors, habits, standards, and behaviours. Rapid industrialization and changes in lifestyle have seen increasing numbers of women in the labour force, and associated poor Exclusive Breastfeeding practices among working mothers. The aim of this study was to identify the determinants of breastfeeding practices among working mothers in Solwezi District of Zambia. Methods: This was a cross-sectional comparative survey comparing determinants of breastfeeding practices among working mothers aged 15 - 49 years in urban and rural areas of Solwezi District. The study was carried out in the Under-five Clinics at Solwezi, Kimasala and Mushitala Urban Clinics, as well as St. Francis, Kapijimpanga and Kisalala Rural Health Centers. Eighty-seven participants were successfully recruited using convenience sampling. A researcher-assisted questionnaire was used to collect data. Data analysis was done using SPSS version 27.0. Descriptive statistical analysis was done using numerical measures such as measures of central tendency and dispersion. The Pearson Chi Square test, correlation and linear regression analysis were performed to test association between the variables at the 0.05 level of significance. Are you assessing exclusive breastfeeding alone or what? Results: The mean age of respondents was 27.44 years (SD = 6.042 years) and the majority of the respondents were married (71.3%, n = 62). Forty-three percent of the respondents were self-employed while the rest were in formal government or private sector employment. Overall, 97.7% of the respondents had heard of exclusive breastfeeding, with health facilities being the most frequent source of information (64.4%). Attitude towards exclusive breastfeeding was generally positive. Fifty-eight percent of respondents exclusively breastfed while the rest were on mixed feeding. Seventy-one percent of respondents reported that their workplaces did not have breastfeeding facilities at work. Only 11.5% of the respondents reported having cultural beliefs restricting breastfeeding. Statistically significant associations were obtained from cross-tabulation analysis between respondent’s occupation and baby feeding type (p 0.001);workload and feeding type (0.024);as well as knowledge of EBF and feeding type (p 0.001). Conclusion: Majority of the respondents demonstrated good knowledge and positive attitude towards exclusive breastfeeding. This study recommends sensitization campaigns in communities to raise awareness about the importance of breastfeeding, and foster behaviour change that promotes breastfeeding.

The laparoscopic rating scale for the evaluation of working conditions for surgical treatment of super-obesity

In this technical note,a novel rating scale(abdominal integral index)was introduced for assessing the conditions of the working laparoscopic space based on linear measurements to select the optimal one or two-stage surgical treatment for super-obesity.Patients with the same height and similar BMI values had different rating scale scores,reflecting different conditions of laparoscopic bariatric surgery.The rating scale helps surgeons and patients make a safe option for surgery,depending on the experience of the surgeon and technical laparoscopic conditions.

A Study on Organizational Commitment,Work Motivation,and Job Performance After the COVID-19 Epidemic in Taiwan-The Mediating Effects of Work Motivation and Organizational Communication

The purpose of this study is to explore the correlation between organizational commitment and job performance among employees in Taiwan Residents companies after the COVID-19 epidemic,and to use work motivation and organizational communication as intermediary variables to further understand the interaction between them.Using hierarchical multiple regression analysis and bootstrap method to analyze,the research results show that organizational commitment has a significant positive impact on work motivation and work performance,and work motivation also has a significant positive impact on work performance.In addition,organizational communication has a mediating effect on organizational commitment and work motivation,and work motivation also has a mediating effect on organizational commitment and work machine performance.The results of this study hope to understand the working conditions of organizations and employees after the COVID-19 epidemic,and provide relevant business operators with follow-up references for their operations.

Humanizing the Culture of Technology Teams: Strategies for Creating Healthier and More Productive Work Environments

With the advancement of technology, companies are increasingly dependent on technology teams to stay competitive. However, members of these teams often work in stressful and unhealthy environments, which can undermine their productivity and well-being. The humanization of the culture of technology teams is an approach that aims to create healthier and more productive work environments for team members, promoting balance between personal and professional life. Despite the importance of a healthy and productive work environment, many companies do not invest in strategies to humanize the culture of their technology teams. This can lead to high levels of stress, staff turnover and low productivity. The objective of this project is to identify effective strategies to humanize the culture of technology teams and create healthier and more productive work environments in digital companies. For this, factors such as management styles, psychological safety, human-centered development, individual beliefs and time and energy management will be analyzed. The project’s methodology will include a literature review on the subject and qualitative data analysis will be performed using a content analysis approach. This project will contribute to the advancement of knowledge about the humanization of the culture of technology teams in digital companies. The results can be applied to companies that want to create healthier and more productive work environments for their team members.

Key factors to prioritize when preparing for the Olympic Games

We need more research that will fulfill the needs of athletes and coaches.This is a common statement,highly relevant nowadays only a few weeks before the commencement of the Paris 2024 Olympic Games.To fill this gap,we have identified 6 topics that we feel coaches and athletes would be interested in learning more to optimize their preparation for the Olympics.These topics are.

Exploring the Factors Associated with 12-Month Non-Return to Work among Motorcyclists Involved in Road Accidents

Introduction: Motorcyclists bear a disproportionate burden of morbidity and mortality from road accidents. In addition, the consequences of these accidents affect the ability of victims to return to work. This study aimed to determine the prevalence and factors associated with non-return to work among surviving motorcyclists involved in road accidents 12 months after the event. Materials and Methods: It was a cross-sectional study conducted using data from a cohort of motorcyclists involved in accidents and recruited in five hospitals in Benin from July 2019 to January 2020. The dependent variable was non-return to work 12 months after the accident (yes vs no). The independent variables were categorized into two groups: baseline and 12-month follow-up variables. Logistic regression was used to determine the factors associated with non-return to work at 12 months among the participants. Results: Among the 362 participants, 55 (15.19%, 95% CI = 11.84 - 19.29) had not returned to work 12 months after the accident. Risk factors for non-return to work identified were: smoking (aOR = 4.41, 95% CI = 1.44 - 13.56, p = 0.010), hospitalization (aOR = 2.87, 95% CI = 1.14 - 7.24, p Conclusion: The prevalence of non-return to work at 12 months was high among surviving motorcyclists involved in road accidents in Benin. Integrated support for patients based on identified risk factors should effectively improve their return to work.