Analysis of Air Exchange System Influence on Thermal and Concentration Modes in the Local Working Area under Radiant Heating Conditions

One of the effective options for energy saving in terms of heat costs for the formation of routine thermal conditions of working areas of large-sized industrial premises is the replacement of traditional convective(water)heating systems with systems,the main part of which are gas infrared emitters.But the mass introduction of such systems based on emitters was held back until recently by the lack of scientific and technical foundations for ensuring not only the routine thermal conditions of local working areas,but also ensuring acceptable concentrations of carbon dioxide,which is formed during the operation of a gas emitter.Solving the latter problem by the method of experimental selection of heating and air exchange modes is practically impossible due to the multivariate nature of possible solutions to this problem.Therefore,the purpose of the work is to analyze the results of theoretical studies of the possibility of ensuring an acceptable level of carbon dioxide concentrations in local working areas during the operation of gas infrared emitters and an air exchange system.Numerical modeling of heat and mass transfer processes under such conditions was performed in a fairly wide range of the main significant factors:air flow rate in the air exchange system from 0.01 to 0.04 kg/s,the position of the air inlet and outlet channels relative to the radiator and the local workplace(height from 0.3 to 4.1 m).It was found that by varying the numerical values of these factors,it is possible to ensure carbon dioxide concentrations in the local working area within the permissible limits of up to 1400 ppm.

Selection of organic Rankine cycle working fluid based on unit-heat-exchange-area net power

To improve energy conversion efficiency, optimization of the working fluids in organic Rankine cycles(ORCs) was explored in the range of low-temperature heat sources. The concept of unit-heat-exchange-area(UHEA) net power, embodying the cost/performance ratio of an ORC system, was proposed as a new indicator to judge the suitability of ORC working fluids on a given condition. The heat exchange area was computed by an improved evaporator model without fixing the minimum temperature difference between working fluid and hot fluid, and the flow pattern transition during heat exchange was also taken into account. The maximum UHEA net powers obtained show that dry organic fluids are more suitable for ORCs than wet organic fluids to recover low-temperature heat. The organic fluid 1-butene is recommended if the inlet temperature of hot fluid is 353.15-363.15 K or443.15-453.15 K, heptane is more suitable at 373.15-423.15 K, and R245 ca is a good option at 483.15-503.15 K.

Working in Remote Areas Services are scarce in mountainous regions

ＷｏｒｋｉｎｇｉｎＲｅｍｏｔｅＡｒｅａｓＳｅｒｖｉｃｅｓａｒｅｓｃａｒｃｅｉｎｍｏｕｎｔａｉｎｏｕｓｒｅｇｉｏｎｓＳｅｒｖｉｃｅＤｅｌｉｖｅｒｙｉｎＲｅｍｏｔｅａｎｄＩｓｏｌａｔｅｄＡｒｅａｓＡｔｈｉｒｔｙｙｅａｒｏｌｄｍｏｔｈｅｒｏｆＤａｉｎａｔｉ...

Factors Influencing Migrant Workers' Urban Labor Patterns: Willing Working Time in Urban Areas as the Mediator

China is witnessing a very complicated economic development environment.Migrant workers'working patterns will directly affect their income level and the realization of many economic and social development goals.This paper collects relevant data from three places:Shanghai,Lanzhou and Chengdu for empirical research whose results show that determinants of migrant worker's willing working time in urban areas mainly include the“income-consumption difference”,“urban-rural consumption difference”and their“urban income and expenditure uncertainty”.These factors directly affect their effective working time in the city,and determine their choice of choosing corresponding work patterns.From the significant differences of these factors,we can see that migrant workers in China is still struggling to solve their material needs under the pressure of livelihood,and less attention is paid to their spiritual needs and the pursuit of quality of life.

Active protection of work area against explosion of dust-gas mixture

Potentially explosive atmosphere can occur not only in the production systems of the food,energy,chemical and petrochemical industries but also in the production processes of the mining industry.Gases,vapours,mists and dusts arise can escape in an uncontrolled way during production,processing,transportation and storage of flammable substances.In combination with oxygen,they create explosive atmospheres that,if ignited,lead to an explosion causing catastrophic damage to peopled lives and property.To protect against the results of hazardous dust-gas mixtures explosions in a confined work space,where employees can stay,various control and protection mechanisms are used in the form of an active explosion-proof system.The article presents the results of tests on an active system for limiting the effects of ignition of gas and/or dust based on a highly efficient explosion suppression system-equipped with an ignition detection system,high-pressure fire extinguisher and a power supply and trigger system.Smokeless powder was used as the explosive charge and sodium bicarbonate as the suppressive material.Tests of the effectiveness of the active explosion suppression system were carried out on two devices:a small-size dry dust collector and a zone extinguishing system adapted for direct explosion suppression in closed working spaces.In both cases,the explosion suppression process took place through the action of extinguishing powder blown out of the fire extinguisher after membrane perforation by compressed combustion products.

Hierarchical power control for OFDM based LTE system

3 GPP LTE has approved uplink intra-cell power control and defined overload indicator （OI） for uplink inter-cell power contrQ1 to mitigate the inter-cell interference （ICI）, respectively. In this pa- per, we propose a hierarchical power control （ HPC ） scheme where intra-eell and inter-cell power controls interact with each other. The inter-cell power control eommand is generated by radio re- source management （RRM） entity according to the ICI-load model together with the current ICI and served load information. This ICI-load model is proposed as a guideline for coordination among cells to enable the system to approach its system specific interference over thermal noise （IoT） work area. Simulation results show that for HPC scheme, the system＇ s IoT is well controlled to fit its pre-de- fined work area and the power efficiency is improved significantly. Our proposed scheme is also ro- bust to different settings of its inter-cell power control period.

Effect of Surface Roughness on the Oxidation Behavior of a Directionally Solidified Ni-Based Superalloy at 1,100℃

The effect of surface roughness on the oxidation behavior of a directionally solidified Ni-based superalloy was investigated by surface mapping microscope,scanning electron microscope and X-ray diffraction.It was found that specimens with surface roughness of 0.05 urn exhibit the best oxidation resistance,while specimens with surface roughness of 0.14 μm behave worse than specimens with surface roughness of 0.83 μm.The specimens with surface roughness of 0.05 μm have the best oxidation resistance,which is mainly due to the smallest surface area exposed in air and thinnest work-hardening layer.The AlOlayer alleviates the oxidation process of the specimens with surface roughness of 0.83 μm,and this is the possible reason for the better oxidation resistance of samples with surface roughness of 0.83 μm than samples with surface roughness of 0.14 μm.