Thermal Behaviors of Work Roll in Finishing Trains of Hot Rolling

In order to analyze the thermal field and thermal contour of work roll in finishing trains of hot rolling in rolling process, a quasi two-dimension implicit finite difference model is developed. To improve the calculating speed and precision, some special solutions are introduced, including the development of this model, the simplification of boundary conditions and the computation of heat transfer coefficients. The results show that these solutions of thermal behaviors of work roll are very much efficient and the model can be used as an on-line profile and fatness control model of large industrial mills.

Wear and Thermal Stress Analysis of Side Dam for Twin Roll Strip Casting

The simulation of the work roll temperature field was carried out by means of ANSYS software, and the thermal crown of the roll along its axis was obtained. The thermal-structural coupled element and contact element were introduced. In the simulation of work roll temperature field, the convert boundary condition and the transient thermal contact between the roll and strip were studied. Besides, the dynamic variation of the work roll temperature and the transient temperature distribution of the work roll during hot rolling were investigated. The calculated results were in good agreement with the measured data.

Determination of Optimal Work Roll Profile for Cold Strip Mill

The model of predicting distribution of strip thickness at the exit and tension stress is established by using weighted residual method and variational method with consideration of rolled metal lateral flow.A New method of calculating loaded roll gap in relation to target tension stress is proposed.The minimum square summation of loaded roll gap deviation is used as an objective function for the first time to optimize initial work roll profile.

Application of simulated annealing algorithm to improve work roll wear model in plate mills

Employing Simulated Annealing Algorithm (SAA) and many measured data, acalculation model of work roll wear was built in the 2 800 mm 4-high mill of Wuhan Iron and Steel(Group) Co. (WISCO). The model was a semi-theory practical formula. Its pattern and magnitude werestill hardly defined with classical optimization methods. But the problem could be resolved by SAA.It was pretty high precision to predict the values for the wear profiles of work roll in a rollingunit. After one-year application, the results show that the model is feasible in engineering, and itcan be applied to predict the wear profiles of work roll in other mills.

Optimization of Roll Shifting Strategy of Alternately Rolling in Hot Strip Mill

An optimization solution to roll shifting strategy for alternately rolling campaign is presented. All the strips in a rolling campaign are divided into narrow strips and wide ones, and shifting position of narrow strips is obtained by the recursive method, and then shifting position of wide strips is optimized by NSGA-II which is a multiobjective genetic algorithm. For wide strips, a multi-objective optimization model of roll shifting strategy is pro posed, which takes 3 wear contour factors including edge smoothness, body smoothness and edge drop as optimization objectives. The Pareto optimal front of roll shifting strategy can be gained quickly by NSGA-II, which suggests a series of alternative solutions to roll shifting strategy. Analysis shows that the conflict exists among the 3 objectives. The final optimal solution is selected from the Pareto optimal solutions by the weighted-sum decision-making method. Industrial production proves the validity of the solution, and it can improve strip profile of alternately rolling, reduce strip edge wave, and extend the rolling miles of rolling campaigns.

Numerical Simulation of Solidification of Work Roll in Centrifugal Casting Process

A program on the solidification process of horizontal centrifugal casting coupled with eutectic carbides segregation has been developed in this paper. Due to the geometrical features of work roll, a cylindrical coordinate system was used. The temperature field of the outer layer at the end of filling process was imported as the initial temperature condition for the solidification process. The model of eutectic carbides segregation caused by different densities between eutectic MC and the molten steel was coupled in the program. The temperature field of the outer layer of work roll during horizontal centrifugal casting process was investigated. Results show that the outer layer has a ＂sandwich shape＂ solid fraction manner. Results also indicate that the segregation of eutectic MC is quite severe during centrifugal casting process. It forms four zones of different content of carbides in radial direction. The simulated results of MC carbides segregation phenomenon agree with the experimental observations.

Thermal Crown Model and Shifting Effect Analysis of Work Roll in Hot Strip Mills

Considering the effect of work roll shifting on roll temperature field,a finite difference method of PR format for roll temperature field was presented,which can meet the requirements of accuracy and speed of online calculation.The step-by-step accumulation method was used to simulate the roll temperature field and thermal crown,and the evolution of roll thermal crown in a rolling campaign was studied.And then,the effects of strip width,rolling rhythm and work roll shifting on roll thermal crown were analyzed.It is found that work roll shifting can disperse the thermal expansion of the roll body especially the edge to make roll thermal contour uniform.The effect of work roll shifting on roll thermal crown is mainly concentrated in regions around twice of roll shifting stroke,and the change range of roll thermal crown is±30μm or so in the same roll body location.

High Temperature Oxidation of a Work Roll Grade High-Chromium White Cast Iron

High-chromium white cast iron is a common material for the manufacture of the work rolls used in the fin- ishing stands in hot strip mills. The high temperature oxidation behaviour of as-cast and heat-treated high-chromium white cast iron was studied by gravimetric means at 650 ℃ in atmospheres that included dry air and a mixture of dry air and water vapour. For both environmental and material conditions, the oxidation rate of the alloys was represen ted by parabolic trends and the oxidation phenomenon was more obvious when the samples were oxidised in water vapour. Water vapour also influenced the chemical composition of the oxides formed in the alloy and under this condi tion, the oxide scale formed on the alloy contained the oxides FeCr2O4 , （Fe,Cr）3O4 and （Fe,Cr）2 O3. In contrast, the alloys exposed to dry air conditions only experienced the formation of FeCr2O4 and （Fe,Cr）2O3. It was found that the presence of water vapour and the chromium content of the alloys increased the oxidation rate by a mechanism that involved chromium depletion of the oxide as a result of hydroxide formation. The differences observed in the oxi- dation behaviour of the alloy are discussed in terms of the composition of the oxidant atmosphere and the metallurgi cal condition of the specimens.