Working condition recognition of sucker rod pumping system based on 4-segment time-frequency signature matrix and deep learning

High-precision and real-time diagnosis of sucker rod pumping system(SRPS)is important for quickly mastering oil well operations.Deep learning-based method for classifying the dynamometer card(DC)of oil wells is an efficient diagnosis method.However,the input of the DC as a two-dimensional image into the deep learning framework suffers from low feature utilization and high computational effort.Additionally,different SRPSs in an oil field have various system parameters,and the same SRPS generates different DCs at different moments.Thus,there is heterogeneity in field data,which can dramatically impair the diagnostic accuracy.To solve the above problems,a working condition recognition method based on 4-segment time-frequency signature matrix(4S-TFSM)and deep learning is presented in this paper.First,the 4-segment time-frequency signature(4S-TFS)method that can reduce the computing power requirements is proposed for feature extraction of DC data.Subsequently,the 4S-TFSM is constructed by relative normalization and matrix calculation to synthesize the features of multiple data and solve the problem of data heterogeneity.Finally,a convolutional neural network(CNN),one of the deep learning frameworks,is used to determine the functioning conditions based on the 4S-TFSM.Experiments on field data verify that the proposed diagnostic method based on 4S-TFSM and CNN(4S-TFSM-CNN)can significantly improve the accuracy of working condition recognition with lower computational cost.To the best of our knowledge,this is the first work to discuss the effect of data heterogeneity on the working condition recognition performance of SRPS.

Design and optimization of fluid lubricated bearings operated with extreme working performances——a comprehensive review

Fluid lubricated bearings have been widely adopted as support components for high-end equipment in metrology,semiconductor devices,aviation,strategic defense,ultraprecision manufacturing,medical treatment,and power generation.In all these applications,the equipment must deliver extreme working performances such as ultraprecise movement,ultrahigh rotation speed,ultraheavy bearing loads,ultrahigh environmental temperatures,strong radiation resistance,and high vacuum operation,which have challenged the design and optimization of reliable fluid lubricated bearings.Breakthrough of any related bottlenecks will promote the development course of high-end equipment.To promote the advancement of high-end equipment,this paper reviews the design and optimization of fluid lubricated bearings operated at typical extreme working performances,targeting the realization of extreme working performances,current challenges and solutions,underlying deficiencies,and promising developmental directions.This paper can guide the selection of suitable fluid lubricated bearings and optimize their structures to meet their required working performances.

UAV-assisted data collection for wireless sensor networks with dynamic working modes

Wireless Sensor Network(WSN)is a cornerstone of Internet of Things(IoT)and has rich application scenarios.In this work,we consider a heterogeneous WSN whose sensor nodes have a diversity in their Residual Energy(RE).In this work,to protect the sensor nodes with low RE,we investigate dynamic working modes for sensor nodes which are determined by their RE and an introduced energy threshold.Besides,we employ an Unmanned Aerial Vehicle(UAV)to collect the stored data from the heterogeneous WSN.We aim to jointly optimize the cluster head selection,energy threshold and sensor nodes’working mode to minimize the weighted sum of energy con-sumption from the WSN and UAV,subject to the data collection rate constraint.To this end,we propose an efficient search method to search for an optimal energy threshold,and develop a penalty-based successive convex approximation algorithm to select the cluster heads.Then we present a low-complexity iterative approach to solve the joint optimization problem and discuss the implementation procedure.Numerical results justify that our proposed approach is able to reduce the energy consumption of the sensor nodes with low RE significantly and also saves energy for the whole WSN.

Correlation of work function and stacking fault energy through Kelvin probe force microscopy and nanohardness in diluteα-magnesium

Electronic interactions of the Group 2A elements with magnesium have been studied through the dilute solid solutions in binary Mg-Ca,Mg-Sr and Mg-Ba systems.This investigation incorporated the difference in the‘Work Function'(ΔWF)measured via Kelvin Probe Force Microscopy(KPFM),as a property directly affected by interatomic bond types,i.e.the electronic structure,nanoindentation measurements,and Stacking Fault Energy values reported in the literature.It was shown that the nano-hardness of the solid-solutionα-Mg phase changed in the order of Mg-Ca>Mg-Sr>Mg-Ba.Thus,it was shown,by also considering the nano-hardness levels,that SFE of a solid-solution is closely correlated with its‘Work Function'level.Nano-hardness measurements on the eutectics andΔWF difference between eutectic phases enabled an assessment of the relative bond strength and the pertinent electronic structures of the eutectics in the three alloys.Correlation withΔWF and at least qualitative verification of those computed SFE values with some experimental measurement techniques were considered important as those computational methods are based on zero Kelvin degree,relatively simple atomic models and a number of assumptions.As asserted by this investigation,if the results of measurement techniques can be qualitatively correlated with those of the computational methods,it can be possible to evaluate the electronic structures in alloys,starting from binary systems,going to ternary and then multi-elemental systems.Our investigation has shown that such a qualitative correlation is possible.After all,the SFE values are not treated as absolute values but rather become essential in comparative investigations when assessing the influences of alloying elements at a fundamental level,that is,free electron density distributions.Our study indicated that the principles of‘electronic metallurgy'in developing multi-elemental alloy systems can be followed via practical experimental methods,i.e.ΔWF measurements using KPFM and nanoindentation.

Relationship between physical activity and specific working memory indicators of depressive symptoms in university students

BACKGROUND The detection rate of depression among university students has been increasing in recent years,becoming one of the main psychological diseases that endangers their physical and mental health.According to statistics,self-harm and suicide,for which there is no effective intervention,are the second leading causes of death.AIM To explore the relationship between different elements and levels of physical activity and college students’depression-symptom-specific working memory indicators.METHODS Of 143 college students were analyzed using the Beck Depression Self-Rating Scale,the Physical Activity Rating Scale,and the Working Memory Task.RESULTS There was a significant difference between college students with depressive symptoms and healthy college students in completing verbal and spatial working memory(SWM)tasks correctly(all P<0.01).Physical Activity Scale-3 scores were significantly and positively correlated with the correct rate of the verbal working memory task(r=0.166)and the correct rate of the SWM task(r=0.210)(all P<0.05).There were significant differences in the correct rates of verbal and SWM tasks according to different exercise intensities(all P<0.05)and different exercise durations(all P<0.05),and no significant differences in the correct rates of verbal and SWM tasks by exercise frequency(all P>0.05).CONCLUSION An increase in physical exercise among college students,particularly medium-and high-intensity exercise and exercise of 30 min or more,can improve the correct rate of completing working memory tasks.

Text Difficulty,Working Memory Capacity and Mind Wandering During Chinese EFL Learners’Reading

This experimental study investigated how text difficulty and different working memory capacity(WMC)affected Chinese EFL learners’reading comprehension and their tendency to engage in task-unrelated thoughts,that is,mind wandering(MW),in the course of reading.Sixty first-year university non-English majors participated in the study.A two-factor mixed experimental design of 2(text difficulty:difficult and simple)×2(WMC:high/large and low/small)was employed.Results revealed that 1)the main and interaction effects of WMC and text difficulty on voluntary MW were significant,whereas those on involuntary MW were not;2)while reading the easy texts,the involuntary MW of high-WMC individuals was less frequent than that of low-WMC ones,whereas while reading the difficult ones,the direct relationship between WMC and involuntary MW was not found;and that 3)high-WMC individuals had a lower overall rate of MW and better reading performance than low-WMC individuals did,but with increasing text difficulty,their rates of overall MW and voluntary MW were getting higher and higher,and the reading performance was getting lower and lower.These results lend support to WM theory and have pedagogical implications for the instruction of L2 reading.

The Impact of the Digital Economy on Rural Residents’Working Hours:Mechanisms and Empirical Evidence

The rapid development of the digital economy has provided a new impetus for rural residents to extend their working hours.Based on the data collected by the China Labor-force Dynamics Survey(CLDS)in 2014,2016,and 2018,this paper measured the development level of the digital economy in China from the perspectives of internet development and digital financial inclusion,and tested the mechanisms of how the digital economy affected rural residents’working hours.The results showed that the digital economy extended rural residents’working hours by expanding information channels and enhancing human capital,and this mechanism was affected by heterogeneity in rural residents’educational background,age,and social capital.Building on these findings,this paper holds that to increase rural residents’income by extending their working hours and achieving common prosperity for all,it is necessary to expand the opportunities for rural residents to participate in skills training and promote their accumulation of human capital.

Feasibility of Synchronously Straightening Working Line of Adjacent Open-cast Mines

Taking Heidaigou Open-cast Mine and Haerwusu Open-cast Mine in Zhungeer mining area as the research objects,this paper deeply analyzes the current mining status of the two mines.Based on the existing working line length,mining technology,transportation system,equipment configuration,transportation access and many other factors,it systematically discusses the feasibility of straightening the working line of adjacent open-cast mines.Through in-depth theoretical analysis,it establishes the mathematical model of impact indicators and cost calculation,and it is concluded that the work line straightening can be technically achieved.However,from the perspective of economic benefits,straightening the working line does not show obvious advantages.

A Review on Technologies for the Use of CO2 as a Working Fluid in Refrigeration and Power Cycles

The use of carbon dioxide as a working fluid has been the subject of extensive studies in recent years, particularly in the field of refrigeration where it is at the heart of research to replace CFC and HCFC. Its thermodynamic properties make it a fluid of choice in the efficient use of energy at low and medium temperatures in engine cycles. However, the performance of transcritical CO2 cycles weakens under high temperature and pressure conditions, especially in refrigeration systems;On the other hand, this disadvantage becomes rather interesting in engine cycles where CO2 can be used as an alternative to the organic working fluid in small and medium-sized electrical systems for low quality or waste heat sources. In order to improve the performance of systems operating with CO2 in the field of refrigeration and electricity production, research has made it possible to develop several concepts, of which this article deals with a review of the state of the art, followed by analyzes in-depth and critical of the various developments to the most recent modifications in these fields. Detailed discussions on the performance and technical characteristics of the different evolutions are also highlighted as well as the factors affecting the overall performance of the systems studied. Finally, perspectives on the future development of the use of CO2 in these different cycles are presented.

Positive Effect of Transcranial Direct Current Stimulation on Visual Verbal Working Memory in Patients with Attention-Deficit/Hyperactivity Disorder

Background: Working memory is an executive function that plays an important role in many aspects of daily life, and its impairment in patients with attention-deficit/hyperactivity disorder (ADHD) affects quality of life. The dorsolateral prefrontal cortex (DLPFC) has been a good target site for transcranial direct current stimulation (tDCS) due to its intense involvement in working memory. In our 2018 study, tDCS improved visual-verbal working memory in healthy subjects. Objective: This study examines the effects of tDCS on ADHD patients, particularly on verbal working memory. Methods: We conducted an experiment involving verbal working memory of two modalities, visual and auditory, and a sustained attention task that could affect working memory in 9 ADHD patients. Active or sham tDCS was applied to the left DLPFC in a single-blind crossover design. Results: tDCS significantly improved the accuracy of visual-verbal working memory. In contrast, tDCS did not affect auditory-verbal working memory and sustained attention. Conclusion: tDCS to the left DLPFC improved visual-verbal working memory in ADHD patients, with important implications for potential ADHD treatments.

借助外力 让感觉升华为思维——基于“Working Model”对2023年新课标卷第6题的拓展分析

“Working Model”是一个物理仿真模拟平台,可直观展示动力学中的物理过程和运动图像,形成真实的感觉。该平台可用于辅助教学,帮助学生通过感觉、知觉、记忆、想象、思维等认知过程来理解和掌握物理概念和规律。以2023年新课标卷第6题为切入点,结合近三年全国高考真题为例,探讨借助外力将感觉升华为思维的可能性,通过对“Working Model”的拓展分析提出一种新的思维模式,旨在帮助学生通过直观刺激和辅助工具将感觉体验转化为深度思考和创新思维。并通过理论分析和实证研究,探讨这种思维模式的实施方法、可行性和效果,为教育教学和认知科学领域的研究提供新的思路和启示。

＂Scar＂： A Social Metaphor for Working Through Revolution Trauma

This article examines the social and psychological function of the ＂scar＂ metaphor at the turn from the late 1970s to the early 1980s. We propose that the widely employed scar metaphor, which was first created in the scar literature movement of the late 1970s and early 1980s, enabled Chinese readers to ＂work through＂ the blend of psychological and ideological disquietude that lingered after the Cultural Revolution. We will first clarify how the scar metaphor facilitated this process of ＂working through,＂ using as an example Lu Xinhua＇s ＂The Scar＂ （Shanghen）. We will then describe how the scar metaphor became dispersed throughout Chinese popular culture and enabled a broad spectrum of Chinese readers to participate in a similar process. At both levels of analysis, we will argue that the scar metaphor simultaneously provides a literary space for working through personal trauma and related anxieties about the ideological transition during this socio-political change.

Working Model在高中物理教学中的应用——以力学模型为例

基于Working Model的仿真实验功能,结合几个常见的力学运动模型展示Working Model在中学物理教学中的用途.利用Working Model将运动过程直观呈现,同时以数值、矢量、动态图像等输出形式将位移、速度和加速度等物理量同步反馈,以此进一步探究物理规律.

Few-shot working condition recognition of a sucker-rod pumping system based on a 4-dimensional time-frequency signature and meta-learning convolutional shrinkage neural network

The accurate and intelligent identification of the working conditions of a sucker-rod pumping system is necessary. As onshore oil extraction gradually enters its mid-to late-stage, the cost required to train a deep learning working condition recognition model for pumping wells by obtaining enough new working condition samples is expensive. For the few-shot problem and large calculation issues of new working conditions of oil wells, a working condition recognition method for pumping unit wells based on a 4-dimensional time-frequency signature (4D-TFS) and meta-learning convolutional shrinkage neural network (ML-CSNN) is proposed. First, the measured pumping unit well workup data are converted into 4D-TFS data, and the initial feature extraction task is performed while compressing the data. Subsequently, a convolutional shrinkage neural network (CSNN) with a specific structure that can ablate low-frequency features is designed to extract working conditions features. Finally, a meta-learning fine-tuning framework for learning the network parameters that are susceptible to task changes is merged into the CSNN to solve the few-shot issue. The results of the experiments demonstrate that the trained ML-CSNN has good recognition accuracy and generalization ability for few-shot working condition recognition. More specifically, in the case of lower computational complexity, only few-shot samples are needed to fine-tune the network parameters, and the model can be quickly adapted to new classes of well conditions.

Empowering Students with Practical ＂Working＂ Experience through Hands-on Multidisciplinary Design Projects

One of the problems that many engineering graduates face when looking for their first job is： Do you have experience？ Employers prefer graduates with relevant experience to those without. Why is experience so important to employers？ Can students accumulate ＂working＂ experience while studying in college？ This paper discusses the use of design projects inside and outside of classrooms to help students gain ＂working＂ experience and skills through hands-on design activities that simulate the actual design activities that occur in the industry. Faculty members from the Mechanical Engineering Technology and Computer Engineering Technology departments were involved in creating multidisciplinary design projects. The design projects give students new insights into what they learn in their coursework and pro.vide students the valuable experiences in analytical skills, concurrent engineering approach, people skills, and management skills needed for the students when looking for employment.

Study of energy-efficient heat resistance and cooling technology for high temperature working face with multiple heat sources in deep mine

In the present research,we proposed a scheme to address the issues of severe heat damage,high energy consumption,low cooling system efficiency,and wastage of cold capacity in mines.To elucidate the seasonal variations of environmental temperature through field measurements,we selected a high-temperature working face in a deep mine as our engineering background.To enhance the heat damage control cability of the working face and minimize unnecessary cooling capac-ity loss,we introduced the multi-dimensional heat hazard prevention and control method called"Heat source barrier and cooling equipment".First,we utilize shotcrete and liquid nitrogen injection to eliminate the heat source and implemented pressure equalization ventilation to disrupt the heat transfer path,thereby creating a heat barrier.Second,we establish divi-sional prediction models for airflow temperature based on the variation patterns obtained through numerical simulation.Third,we devise the location and dynamic control strategy for the cooling equipment based on the prediction models.The results of field application show that the heat resistance and cooling linkage method comply with the safety requirement throughout the entire mining cycle while effectively reducing energy consumption.The ambient temperature is maintained below 30℃,resulting in the energy saving of 10%during the high-temperature period and over 50%during the low-temperature period.These findings serve as a valuable reference for managing heat damage in high-temperature working faces.

Research on the dynamic response of connecting rod bearing bush wear of reciprocating machine under variable working conditions

As a type of reciprocating machine, the reciprocating compressor has a compact structure and many excitation sources.Once the small end bearing of the connecting rod is worn, it is easy to cause the sintering of the bearing and the abnormal vibration of the body.Based on the characteristics of poor lubrication state and complex force of connecting rod small head bearing, a mixed lubrication model considering oil groove feed was established, and the dynamic simulation of the reciprocating compressor model with lubricated bearings was carried out;considering different speeds and gas load conditions, the law of the impact of the eigenvalues changing with working conditions was explored.The fault simulation experiment was carried out by selecting representative working conditions, which verified the correctness of the simulation method.The study found that two contact collisions between the pin and the bearing bush occurred in one cycle, the collision impact was more severe under the wear fault, and the existence of the gap made the dynamic response more sensitive to the change of working conditions.This research provides ideas for the location and feature extraction of fault symptom signal angular segments in the process of complex measured signal processing.

The laparoscopic rating scale for the evaluation of working conditions for surgical treatment of super-obesity

In this technical note,a novel rating scale(abdominal integral index)was introduced for assessing the conditions of the working laparoscopic space based on linear measurements to select the optimal one or two-stage surgical treatment for super-obesity.Patients with the same height and similar BMI values had different rating scale scores,reflecting different conditions of laparoscopic bariatric surgery.The rating scale helps surgeons and patients make a safe option for surgery,depending on the experience of the surgeon and technical laparoscopic conditions.

Determinants of Breastfeeding Practices among Working Mothers in Solwezi District of Zambia

Background: As one of the strategies to reduce infant morbidity and mortality, the World Health Organization recommends early initiation of exclusive breastfeeding and timely introduction of complementary feeding with continued breastfeeding for up to two years or beyond. Although breastfeeding is a natural process, it is influenced by different socio-cultural factors, habits, standards, and behaviours. Rapid industrialization and changes in lifestyle have seen increasing numbers of women in the labour force, and associated poor Exclusive Breastfeeding practices among working mothers. The aim of this study was to identify the determinants of breastfeeding practices among working mothers in Solwezi District of Zambia. Methods: This was a cross-sectional comparative survey comparing determinants of breastfeeding practices among working mothers aged 15 - 49 years in urban and rural areas of Solwezi District. The study was carried out in the Under-five Clinics at Solwezi, Kimasala and Mushitala Urban Clinics, as well as St. Francis, Kapijimpanga and Kisalala Rural Health Centers. Eighty-seven participants were successfully recruited using convenience sampling. A researcher-assisted questionnaire was used to collect data. Data analysis was done using SPSS version 27.0. Descriptive statistical analysis was done using numerical measures such as measures of central tendency and dispersion. The Pearson Chi Square test, correlation and linear regression analysis were performed to test association between the variables at the 0.05 level of significance. Are you assessing exclusive breastfeeding alone or what? Results: The mean age of respondents was 27.44 years (SD = 6.042 years) and the majority of the respondents were married (71.3%, n = 62). Forty-three percent of the respondents were self-employed while the rest were in formal government or private sector employment. Overall, 97.7% of the respondents had heard of exclusive breastfeeding, with health facilities being the most frequent source of information (64.4%). Attitude towards exclusive breastfeeding was generally positive. Fifty-eight percent of respondents exclusively breastfed while the rest were on mixed feeding. Seventy-one percent of respondents reported that their workplaces did not have breastfeeding facilities at work. Only 11.5% of the respondents reported having cultural beliefs restricting breastfeeding. Statistically significant associations were obtained from cross-tabulation analysis between respondent’s occupation and baby feeding type (p 0.001);workload and feeding type (0.024);as well as knowledge of EBF and feeding type (p 0.001). Conclusion: Majority of the respondents demonstrated good knowledge and positive attitude towards exclusive breastfeeding. This study recommends sensitization campaigns in communities to raise awareness about the importance of breastfeeding, and foster behaviour change that promotes breastfeeding.

Online Peer Advice: Giving Advice on Chinese Social Networking Sites

This study investigates advice-giving in peer-to-peer comment sections on Chinese social networking sites. The results show that advice, explanation, experience, and assessment are the four most frequent discursive moves in Chinese advice given by peers on social networking sites. Involvement, mitigation, and face-threatening strategies are also utilized frequently by those peers to give directives and express empathy and solidarity on Chinese online sites, thereby building supportive relationships among them in online communities. The online peer advice-giving in this study is influenced by multiple aspects of the platform, participants, and language use, presenting distinctive characteristics that differ from other studies.