With the wide use of three-dimensional woven spacer composites(3DWSCs),the market expects greater mechanical properties from this material.By changing the weft fastening method of the traditional I-shape pile yarns,we...With the wide use of three-dimensional woven spacer composites(3DWSCs),the market expects greater mechanical properties from this material.By changing the weft fastening method of the traditional I-shape pile yarns,we designed three-dimensional woven spacer fabrics(3DWSFs)and 3DWSCs with the weft V-shape to improve the compression performance of traditional 3DWSFs.The effects of weft binding structures,V-pile densities,and V-shaped angle were investigated in this paper.It is found that the compression resistance of 3DWSFs with the weft V-shape is improved compared to that with the weft I-shape,the fabric height recovery rate is as high as 95.7%,and the average elastic recovery rate is 59.39%.When the interlayer pile yarn density is the same,the weft V-shaped and weft I-shaped 3DWSCs have similar flatwise pressure and edgewise pressure performance.The compression properties of the composite improve as the density of the V-pile yarns increases.The flatwise compression load decreases as the V-shaped angle decreases.When the V-shaped angle is 28°and 42°,the latitudinal V-shaped 3DWSCs perform exceptionally well in terms of anti-compression cushioning.The V-shaped weft binding method offers a novel approach to structural design of 3DWSCs.展开更多
The article created 21 types of fabrics for the new composition of dublerin. Tests of various types of weave, fiber composition and yarn count are shown in various ways. The physical and mechanical parameters of the t...The article created 21 types of fabrics for the new composition of dublerin. Tests of various types of weave, fiber composition and yarn count are shown in various ways. The physical and mechanical parameters of the test samples were determined and analyzed at the “Accredited Testing Laboratory for Light Industry Products” at the State Unitary Enterprise “Namangan Center for Testing and Certification”. The reason for such a low performance of the motos of number 15 produced in the scientific research work is that the linear densities of the body and the yarn are four times different, despite the weaving of the fabric. Elongation at break is also dependent on penetration.展开更多
基金Fundamental Research Funds for the Central Universities,China(Nos.2232022D-11 and 22D128102/007)Jiangsu Transformation and Upgrading Funding Program for Industrial and Information Industry,ChinaShanghai Natural Science Foundation of Shanghai Municipal Science and Technology Commission,China(No.20ZR1401600)。
文摘With the wide use of three-dimensional woven spacer composites(3DWSCs),the market expects greater mechanical properties from this material.By changing the weft fastening method of the traditional I-shape pile yarns,we designed three-dimensional woven spacer fabrics(3DWSFs)and 3DWSCs with the weft V-shape to improve the compression performance of traditional 3DWSFs.The effects of weft binding structures,V-pile densities,and V-shaped angle were investigated in this paper.It is found that the compression resistance of 3DWSFs with the weft V-shape is improved compared to that with the weft I-shape,the fabric height recovery rate is as high as 95.7%,and the average elastic recovery rate is 59.39%.When the interlayer pile yarn density is the same,the weft V-shaped and weft I-shaped 3DWSCs have similar flatwise pressure and edgewise pressure performance.The compression properties of the composite improve as the density of the V-pile yarns increases.The flatwise compression load decreases as the V-shaped angle decreases.When the V-shaped angle is 28°and 42°,the latitudinal V-shaped 3DWSCs perform exceptionally well in terms of anti-compression cushioning.The V-shaped weft binding method offers a novel approach to structural design of 3DWSCs.
文摘The article created 21 types of fabrics for the new composition of dublerin. Tests of various types of weave, fiber composition and yarn count are shown in various ways. The physical and mechanical parameters of the test samples were determined and analyzed at the “Accredited Testing Laboratory for Light Industry Products” at the State Unitary Enterprise “Namangan Center for Testing and Certification”. The reason for such a low performance of the motos of number 15 produced in the scientific research work is that the linear densities of the body and the yarn are four times different, despite the weaving of the fabric. Elongation at break is also dependent on penetration.
