Cation exchange for mercury and cadmium of xanthated,sulfonated,activated and non-treated subbituminous coal,commercial activated carbon and commercial synthetic resin:effect of pre-oxidation on xanthation of subbituminous coal

A subbituminous coal was oxidized with air at 150℃on a fixed bed for 4 h and xanthated with carbondisulfide in a basic solution,at 30 or 5-10℃.This xanthated coal was evaluated for the removal of Hg^(2+)and Cd^(2+)from 7,000 mg/L aqueous solutions;metal concentrations were detemmined by atomic absorption spectrometry.The ionexchange of the xanthated coal was compared against those of the original subbituminous coal,a sulfonated subbituminouscoal,activated carbon,commercial activated carbon,and commercial synthetic resin.The commercial synthetic resinshowed the highest exchange capacity(concentration factor 98%)followed by the xanthated coal(concentration factor 96%).The retention of cadmium on the sulfonated subbituminous coal was lower(exchange capacity 0.56 meq/g)thanthat of xanthated coals(1.85±0.09 meq/g).Our xanthated coal showed a better Cd^(2+)removal(8l%o against 15%)than anon preoxidized 40-h-xanthated coal,which shows that oxidation of coal increased the amount of oxygenated groups whichenhanced xanthation.

Effect of hydrogen peroxide on selective flotation of chalcocite and enargite

Enargite is typically associated with chalcocite.Owing to the similarity in the flotation behaviors of these minerals,both minerals are reported to concentrate in the conventional flotation circuit.However,inorganic arsenic in enargite can decrease the copper concentrate quality and increase the operating cost of processing this concentrate.Separating these minerals is important for cleaner copper production to avoid these effects.In this context,this study investigated the effect of hydrogen peroxide(H_(2)O_(2))treatment on the flotation behavior of chalcocite and enargite.Flotation tests of pure and mixed minerals indicated that H_(2)O_(2)treatment reduced the floatability of chalcocite and enargite by forming sulfate and copper hydroxide on their surfaces.Despite the detrimental effect of the H_(2)O_(2)treatment,there was a narrow window of H_(2)O_(2)concentration for separating both minerals,in which enargite floated and chalcocite was depressed.This selective flotation behavior was caused by the rapid adsorption of potassium amyl xanthate(KAX)and lower surface oxidation of enargite compared with that of chalcocite.

Microthermokinetic study of xanthate adsorption on impurity-doped galena

Six kinds of galena with different impurities were synthesized and the effects of impurities on the floatability of galena were investigated. The thermodynamic and kinetic parameters on the galena surface were measured using microcalorimetry, and the adsorption configuration and energy of butyl xanthate on the surfaces of galena with different impurities were simulated by density functional theory. Flotation experiments showed that Ag and Bi significantly promoted the recovery of galena, while Zn, Sb, Mn, and Cu reduced the recovery of the flotation. Microthermokinetic results indicated that the absolute value of xanthate adsorption heat was directly proportional to the flotation recovery of galena. Adsorption heat and reaction rate coefficients of xanthate on galena containing Ag or Bi were larger than those on pure galena, but smaller on galena containing Cu or Sb. Additionally, the relationship between the heat of unsaturated adsorption of xanthate and the adsorption energy of impurity atom on galena surface was investigated.

Effects of galvanic interaction between galena and pyrite on their flotation in the presence of butyl xanthate

The effects of galvanic interaction between galena and pyrite on their flotation and electrochemical characters were studied by electrochemical,adsorption,flotation and FTIR techniques,respectively.Electrochemical tests indicate that galena is electrochemically more active than pyrite and serves as an anode in galvanic combination with pyrite.The galvanic current density from a mixture of galena and pyrite is 4 times as high as the self corrosion current density of galena,which indicates that the corrosion rate of galena is accelerated.Adsorption tests show that the adsorption of butyl xanthate on galena surface is enhanced,and affected by a combination of pyrite-galena mixtures and conditioning time.Compared with individual mineral particles,galvanic interaction reduces the floatability difference between galena and pyrite.The flotation recovery of galena decreases while that of pyrite increases when two minerals are mixed together due to the influence of galvanic interaction on the formation of hydrophilic/hydrophobic product.The FTIR results show that the formation of dixanthogen on pyrite surface is depressed due to the galvanic interaction.

Effect of potential on characteristics of surface film on natural chalcopyrite

Electrochemical behavior of natural chalcopyrite in electrolyte solution containing 5×10？4 mol/L ethyl xanthate, and the effect of potential on the composition and characteristics of surface film were studied by cyclic voltammetry （CV）, scanning electron microscopy （SEM） and electrochemical impedance spectroscopy （EIS）. The adsorption of xanthate （X？） occurred on the mineral surface at open-circuit potential （OCP）. In the potential range from -0.11 to 0.2 V, the electrochemical reaction related to the formation of the hydrophobic film of dixanthogen （X2） occurred on natural chalcopyrite surface. This surface film had high coverage and large thickness at the potential of 0 V, but it had low coverage and small thickness at the potentials of 0.1 V and 0.2 V. Electrochemical activation started to occur when the potential was higher than 0.2 V, and the film of X2 transformed to plenty of Cu（Ⅱ） and Fe（Ⅲ） oxygen-containing species which had the porous and loose characteristics.

Occurrence of lead and silver minerals and their interaction with xanthate in slurry of zinc electrolysis anode slime

The background pulp potential of zinc anode slime,and its influence on the occurrence of lead,silver and xanthate,were investigated with thermodynamic method.The thermodynamic conclusion and XRD analysis pointed out that in zinc anode slime,the thermodynamically stable compound of xanthate is dixanthogen,anglesite is the only mineral of lead,and kerargyrite is one of silver minerals occurring.Microflotation tests on single minerals of anglesite and kerargyrite in sulfuric acid solution by amyl dixanthogen indicated that dixanthogen has a much stronger collecting ability to kerargyrite than to anglesite.Molecular dynamic simulation indicated that amyl dixanthogen can only be adsorbed on the surface of kerargyrite in the presence of SO42-.The FTIR tests also verified the selective adsorption of amyl dixanthogen on the surface of kerargyrite in the presence of SO42-.

Floc flotation of marmatite fines in aqueous suspensions induced by butyl xanthate and ammonium dibutyl dithiophosphate

The hydrophobic flocculation of marmatite fines in aqueous suspensions induced by butyl xanthate （KBX） and ammonium dibutyl dithiophosphate （ADD） was investigated using laser particle size analysis, microscopy analysis, electrophoretic light scattering, contact angle measurement and infrared spectroscopy. The studies were performed on single minerals with size 〈20 μm by varying several parameters, including pH, collector concentration and kerosene addition. The results show that the floc fotation closely correlated with the size of flocs and the particle hydrophobicity, but was not lowered with increasing the particle surface charges due to collector adsorption. Under good operating conditions, the floc flotation of marmatite fines as a function of KBX and ADD can all reach floatability over 90%, in comparison with conventional flotation obtaining floatability of about 60%. It also has been found that a small addition of kerosene greatly improved the floc flotation because of the formation of oil films on marmatite particles. The results of FTIR spectra indicate that adsorption of the two collectors onto marmatite were chemical adsorption.

Xanthate interaction and flotation separation of H2O2-treated chalcopyrite and pyrite

This study investigated the effects of H2O2 treatment on xanthate interaction and flotation separation of chalcopyrite and pyrite by making use of a series of laboratory flotation experiments and surface analysis techniques.Flotation test results showed that H2O2 treatment influenced the flotation behaviors of the two minerals;however,flotation of pyrite was depressed more significantly than that of the chalcopyrite.Under well-controlled H2O2 concentration,the selective separation of chalcopyrite from pyrite was realized at pH 9.0,at which the recovery of chalcopyrite was over 84%and that of pyrite was less than 24%.Zeta potential,UV-visible and IR spectrum measurements revealed that the collector interacted differently with the two minerals after H2O2 treatment,and the surface of chalcopyrite adsorbed much greater amount of xanthate than that of the pyrite.IR and XPS analyses showed that the H2O2 treatment significantly changed the surface properties of pyrite to very hydrophilic species that inhibited the adsorption of collector and thus depressed the floatability of pyrite.While,the surface of chalcopyrite remained mildly inert to H2O2,as a result,the adsorption of xanthate and its oxidation to dixanthogen were very effective,which enhanced the flotation of chalcopyrite.

Sulfidization regulation of cuprite by pre-oxidation using sodium hypochlorite as an oxidant

The direct sulfidization of cuprite is inefficient because cuprite is a copper-oxide mineral with a strong surface hydrophilicity.In this study,oxidant was used to modify cuprite surfaces to regulate the sulfidization of cuprite.Microflotation tests showed that the flotation recovery of pre-oxidized cuprite was nearly25% higher than that of direct sulfidization flotation,which indicates that the cuprite surface activity was enhanced after pre-oxidation by Cu(Ⅰ) species(weak affinity with sulfur ions) transformation to Cu(Ⅱ)species(strong affinity with sulfur ions).Zeta potential,scanning electron microscopy-energy dispersive X-ray spectroscopy,X-ray photoelectron spectroscopy,and time-of-flight secondary ion mass spectrometry results showed that pre-oxidation improved cuprite sulfidization and promoted the formation of copper-sulfide species on the cuprite surfaces.The mineral surface stability and thus,xanthate species adsorption on the cuprite surfaces were improved.The surface-adsorption measurements and infrared spectroscopy showed that a large amount of xanthate species was adsorbed onto the sulfidized cuprite surfaces after pre-oxidation,which enhanced the cuprite hydrophobicity and improved the cuprite flotation.

Enhancement of galena-potassium ethyl xanthate flotation system by low power ultrasound

The objective of this study is to investigate the improvement possibilities of the floatability of galena with ultrasonic application in the presence of potassium ethyl xanthate(KEX). For this purpose, micro-flotation experiments were carried out in addition to surface chemistry studies including zeta potential, contact angle, and bubble-particle attachment time measurements at various ultrasonic power levels and conditioning time. The results showed that, the maximum micro-flotation recovery of 77.5% was obtained with 30 W ultrasound power and 2 min conditioning time. In addition, more negative zeta potential values were obtained with ultrasound as well as higher contact angle and lower bubble-particle attachment time, which indicated the increased hydrophobicity of galena with ultrasound.

Flotation behaviors and mechanisms of chalcopyrite and galena after cyanide treatment

Adsorbing tests between CN? and chalcopyrite or galena were conducted firstly, and then flotation tests of the twocyaniding minerals were investigated in butyl xanthate (BX) system. Results showed that the interaction between CN? and the twomineral surfaces were both chemical adsorption and can be described by the Langmuir adsorption isotherm model. In the optimumcondition of pH 6.5 and 4.0 mg/L BX, the recovery of cyaniding chalcopyrite and galena reached 82.1% and 63.9%, respectively. BXimproved the hydrophobicity of the surfaces of the two minerals, although CN? reduced the contact angle on the surface of minerals.The inhibitory effect of CN? on chalcopyrite far outweighed galena. Electrostatic adsorption exists in the interaction between BX andthe surface of galena after cyanide treatment in the pH range of 4.2?8.4, while the interactions between BX and the surface ofchalcopyrite after cyanide treatment is chemical adsorption.

Adsorption kinetics and thermodynamics of sodium butyl xanthate onto bornite in flotation

In this paper,the effect of sodium butyl xanthate(NaBX)adsorption on the surface of bornite at different pH on flotation was studied by adsorption kinetic and thermodynamic.The flotation results demonstrated that the recovery was the highest when pH was 9 in NaBX solution(4×10^?5 mol/L).The adsorption kinetics showed the reaction of NaBX on the bornite conformed to the second order kinetic equation;it belonged to the multimolecular layer adsorption of Freundlich model;the maximum adsorption rate constant was 0.30 g/(10^?6 mol·min),and the equilibrium adsorption capacity was 2.70×10^?6 mol/g.Thermodynamic calculation results indicated that the adsorption process was spontaneous chemisorption,and the adsorption products of NaBX on bornite surface were cupric butyl xanthate,ferric butyl xanthate and dixanthogen,which were confirmed by infrared spectrum measurements.

Effective removal of heavy metals from aqueous solutions by orange peel xanthate

Preparation of orange peel xanthate and its adsorption behaviors of five heavy metals(Cu 2+ ,Cd 2+ ,Pb 2+ ,Zn 2+ and Ni 2+ ) were studied.FTIR spectra,Zeta potentials and TG analysis were used to characterize prepared orange peel xanthate.Effects of various parameters including equilibrium pH,initial metal ion concentration and adsorption time on the adsorption processes for the five metal ions were investigated.It was found that for all five metal ions,the adsorption isotherms agreed Langmuir model very well and the maximum adsorption capacities of Cu2 +,Cd 2+,Pb 2+,Zn 2+and Ni 2+were obtained as 77.60,76.57,218.34,49.85 and 15.45 mg/g,respectively.All adsorption processes can attain equilibrium within 20 min and kinetics was well fitted by psesudo-second order equation.It is proposed that the adsorption mechanism was complexation.

Improved hemimorphite flotation using xanthate as a collector with S(Ⅱ) and Pb(Ⅱ) activation

The flotation of hemimorphite using the S(Ⅱ)–Pb(Ⅱ)–xanthate process,which includes sulfidization with sodium sulfide,activation by lead cations,and subsequent flotation with xanthate,was investigated.The flotation results indicated that hemimorphite floats when the S(Ⅱ)–Pb(Ⅱ)–xanthate process is used; a maximum recovery of approximately 90% was obtained.Zeta-potential,contact-angle,scanning electron microscopy–energy-dispersive spectrometry(SEM–EDS),and diffuse-reflectance infrared Fourier transform spectroscopy(DRIFTS) measurements were used to characterize the activation products on the hemimorphite surface and their subsequent interaction with sodium butyl xanthate(SBX).The results showed that a Zn S coating formed on the hemimorphite surface after the sample was conditioned in an Na2 S solution.However,the formation of a Zn S coating on the hemimorphite surface did not improve hemimorphite flotation.With the subsequent addition of lead cations,Pb S species formed on the mineral surface.The formation of the Pb S species on the surface of hemimorphite significantly increased the adsorption capacity of SBX,forming lead xanthate(referred to as chemical adsorption) and leading to a substantial improvement in hemimorphite flotation.Our results indicate that the addition of lead cations is a critical step in the successful flotation of hemimorphite using the sulfidization–lead ion activation–xanthate process.

The reversible addition-fragmentation chain transfer(RAFT) miniemulsion polymerization of vinyl acetate mediated by xanthate

The reversible addition-fragmentation chain transfer （RAFT） miniemulsion polymerization of vinyl acetate （VAc） mediated by methyl （methoxycarbonothioyl） sulfanyl acetate （MMSA） was carried out. The results showed that polymerizations initiated by AIBN and KPS proceeded in a controlled way. The RAFT miniemulsion polymerization of VAc initiated by KPS showed the shorter inhibition period, higher propagation rate coefficient and final conversion than those in experiment initiated by AIBN. When the monomer conversion reached 25%, the polydispersity index （PDI） of polymer became broad, which was related to chain transfer reaction in RAFT miniemulsion of VAc.

Mechanism of different particle sizes of quartz activated by metallic ion in butyl xanthate solution

To investigate effect of metallic ion activation on different particle sizes of quartz in butyl xanthate solution,six common ions(Pb^(2+),Cu^(2+),Fe^(3+),Fe^(2+),Mg^(2+) and Ca^(2+)) were introduced as activators.The approaches of micro-flotation,adsorption test and zeta potential measurement were adopted to reveal the mechanism of ion activation.The results show that Pb^(2+),Cu^(2+) and Fe^(3+) are effective activators for the flotation of quartz in butyl xanthate solution because of their absorption on activated quartz surface.Average recoveries of fine particles(<37 μm) are greater than those of coarser particles(37-74 μm),suggesting that the former is easier to be activated and more likely to be floated and thus entrained in sulphide concentrate.From another perspective,addition of metallic ions(Pb^(2+),Cu^(2+) and Fe^(3+)) renders zeta potentials move positively,and addition of the same metallic ions and butyl xanthate makes zeta potential drop apparently,which support a mechanism where they adsorb onto quartz surface,resulting in an expected increase in butyl xanthate collector adsorption with a concomitant increase in the flotation recoveries.

Adsorption behavior of heptyl xanthate on surface of ZnO and Cu(Ⅱ) activated ZnO using continuous online in situ ATR-FTIR technology

A continuous online in situ attenuated total reflection Fourier-transform infrared(ATR-FTIR)spectroscopic technique was used to investigate the adsorption and desorption kinetics of heptyl xanthate(KHX)on the surface of ZnO and Cu(Ⅱ)activated ZnO.The results showed that Cu(Ⅱ)facilitated the xanthate adsorption process on the surface,and led to the formation of cuprous xanthate(CuX),dixanthogen(X_(2))and xanthate aggregates.The adsorption of xanthate on the surface of ZnO and Cu(Ⅱ)activated ZnO was found to both follow the pseudo-first-order kinetic model.When the NaOH solution was used as a desorption agent,the adsorbed xanthate can largely be removed due to the competition between OH^(−)and HX−.However,for Cu(Ⅱ)activated ZnO,the peak intensities at 1197 and 1082 cm^(−1) had no obvious weakening,and the absorption intensities at 1261 and 1026 cm^(−1) increased in the first 5 min,indicating an ion-exchange reaction between OH^(−)and surface zinc bonded xanthate HX−and the reorganization of adsorbed xanthate.

Degradation of n-butyl xanthate using fly ash as heterogeneous Fenton-like catalyst

Heterogeneous Fenton-like process using fly ash as a catalyst was studied to degrade n-butyl xanthate form aqueous solution. The different reaction parameters on the degradation efficiency of the process were investigated. The fly ash/H2O2 catalyst possesses a high oxidation activity for n-butyl xanthate degradation in aqueous solution. It is found that both the dosage of catalyst and initial solution pH significantly affect the n-butyl xanthate conversion efficient. The results indicate that by using 1.176 mmol/L H2O2 and 1.0 g/L fly ash catalyst with mass fraction of 4.14% Fe(III) oxide at pH 3.0, almost 96.90% n-butyl xanthate conversion and over 96.66% COD removal can be achieved within 120 min with heterogeneous catalysis by fly ash. CS2 as an intermediate of n-butyl xanthate oxidation. Finally, it is demonstrated that the fly ash/H2O2 catalytic oxidation process can be an efficient method for the treatment of n-butyl xanthate containing wastewater.

THE PULP ELECTROCHEMISTRY OF FLOTATION SEPARATION FOR STIBNITE-ARSENOPYRITE BULK CONCENTRATE

In the thermodynamics, for flotation separation of the SbAs bulk concentrate system there is no potential extent using butyl xanthate as collector. However in the kinetics, there exists 150 mV in reducing potential of butyl dixanthogen on the surface of stibnite and arsenopyrite. In this paper, their reducing kinetic difference of electrochemistry was confirmed by pure mineral flotation under controlled potential, the artificial SbAs bulk concentrate flotation separation and UVspectrophotometic analysis. The electrochemical separation of SbAs bulk concentrate has been carried out. qualified concentrate has been obtained. Sbconcentrate contains Sb 4944 %, As 044 %, Sbrecovery is 8783 % and Asconcentrate contains As 1096 %, Asrecovery is 9466 %.

SYNERGISM OF WOLFRAMITE FLOTATION WITH BENZYL ARSONIC ACID AND SODIUM BUTYL XANTHATE

Wolframite notation with benzyl arsonic acid and sodium butyl xanthate is studied,at first.It shows the efficiency of mineral processig is good when the two agents are added together.Then the synergism of sodium butyl xanthate and benzyl arsonic acid is studied also by HPLC.