Bio-removal of mixture of benzene,toluene,ethylbenzene,and xylenes/total petroleum hydrocarbons/trichloroethylene from contaminated water

Four pure cultures were isolated from soil samples potentially contaminated with gasoline compounds either at a construction site near a gas station in Fai Chi Kei,Macao SAR or in the northern parts of China（Beijing,and Hebei and Shandong）.The effects of different concentrations of benzene,toluene,ethylbenzene,and three isomers（ortho-,meta-,and para-） of xylene（BTEX）,total petroleum hydrocarbons（TPH）,and trichloroethylene（TCE）,when they were present in mixtures,on the bio-removal effciencies of microbial isolates were investigated,together with their interactions during the bio-removal process.When the isolates were tested for the BTEX（50-350 mg/L）/TPH（2000 mg/L） mixture,BTEoX in BTEoX/TPH mixture was shown with higher bio-removal effciencies,while BTEmX in BTEmX/TPH mixture was shown with the lowest,regardless of isolates.The TPH in BTEmX/TPH mixture,on the other hand,were generally shown with higher bio-removal effciencies compared to when TPH mixed with BTEoX and BTEpX.When these BTEX mixtures（at 350 mg/L） were present with TCE（5-50 mg/L）,the stimulatory effect of TCE toward BTEoX bio-removal was observed for BTEoX/TCE mixture,while the inhibitory effect of TCE toward BTEmX for BTEmX/TCE mixture.The bio-removal effciency for TPH was shown lower in TPH（2000 mg/L）/TCE（5-50 mg/L） mixtures compared to TPH present alone,implying the inhibitory effect of TCE toward TPH bio-removal.For the mixture of BTEX（417 mg/L）,TPH（2000 mg/L） along with TCE（5- 50 mg/L）,TCE was shown co-metabolically removed more effciently at 15 mg/L,probably utilizing BTEX and/or TPH as primary substrates.

Qualitative analysis of aromatic compounds via 1D TOCSY techniques

The aromatic compounds,including o-xylene,m-xylene,p-xylene,and ethylbenzene,primarily originate from the catalytic reforming of crude oil,and have a wide variety of applications.However,because of similar physical and chemical properties,these compounds are difficult to be identified by gas chromatography(GC)without standard samples.With the development of modern nuclear magnetic resonance(NMR)techniques,NMR has emerged as a powerful and efficient tool for the rapid analysis of complex and crude mixtures without purification.In this study,the parameters of one-dimensional(1D)total correlation spectroscopy(TOCSY)NMR techniques,including 1D selective gradient TOCSY and 1D chemicalshift-selective filtration(CSSF)with TOCSY,were optimized to obtain comprehensive molecular structure information.The results indicate that the overlapped signals in NMR spectra of nonpolar aromatic compounds(including o-xylene,m-xylene,p-xylene and ethylbenzene),polar aromatic compounds(benzyl alcohol,benzaldehyde,benzoic acid),and aromatic compounds with additional conjugated bonds(styrene)can be resolved in 1D TOCSY.More importantly,full molecular structures can be clearly distinguished by setting appropriate mixing time in 1D TOCSY.This approach simplifies the NMR spectra,provides structural information of entire molecules,and can be applied for the analysis of other structural isomers.

Benzene, toluene and xylenes levels in new and used vehicles of the same model

The aim of this work was to determine the level of benzene, toluene, o-xylene and m, p-xylene （BTX） in air samples collected from the cabins of new and used vehicles of the same model. Ten new vehicles were examined in order to check interior emission from materials used to equip the passenger compartment. In order to compare and define the impact of exhaust gases, air samples were also collected from two used cars, at different mileages （up to 20,000 kin）. All vehicles tested were of the same type. Samples were collected onto Carbograph 1TD sorbent, thermally desorbed and examined with the use of gas chromatography with flame ionisation and mass spectrometry detectors. All results obtained were referred to Polish and German requirements for indoor air quality （both in public buildings and in workspace environments）. Average benzene, toluene, o-xylene and m, p-xylene concentrations in new cars were determined at the level of 11.8 μg/m^3, 82.7 μg/m^3, 21.2 μg/m^3 and 89.5 μg/m^3, respectively. In the used cars, BTX concentration increased with increasing vehicle mileage. The most significant increase of BTX concentration was observed above 11,000 km mileage.

Effect of mesopore spatial distribution of HZSM-5 catalyst on zinc state and product distribution in 1-hexene aromatization

1-hexene aromatization is a promising technology to convert excess olefin in fluid catalytic cracking(FCC)gasoline to high-value benzene(B),toluene(T),and xylene.Besides,the increasing market demand of xylene has put forward higher requirements for new generation of catalyst.For increasing xylene yield in 1-hexene aromatization,the effect of mesopore structure and spatial distribution on product distribution and Zn loading was studied.Catalysts with different mesopore spatial distribution were prepared by post-treatment of parent HZSM-5 zeolite,including NaOH treatment,tetra-propylammonium hydroxide(TPAOH)treatment,and recrystallization.It was found the evenly distributed mesopore mainly prolongs the catalyst lifetime by enhancing diffusion properties but reduces the aromatics selectivity,as a result of damage of micropores close to the catalyst surface.While the selectivity of high-value xylene can be highly promoted when the mesopore is mainly distributed interior the catalyst.Besides,the state of loaded Zn was also affected by mesopores spatial distribution.On the optimized catalyst,the xylene selectivity was enhanced by 12.4%compared with conventional Zn-loaded parent HZSM-5 catalyst at conversion over 99%.It was attributed to the synergy effect of mesopores spatial distribution and optimized acid properties.This work reveals the role of mesopores in different spatial positions of 1-hexene aromatization catalysts in the reaction process and the influence on metal distribution,as well as their synergistic effect two on the improvement of xylene selectivity,which can improve our understanding of catalyst pore structure and be helpful for the rational design of high-efficient catalyst.

Selective Hydrogenation of Polycyclic Aromatics to Monocyclic Aromatics over NiMoC/HβCatalysts in a Methane and Hydrogen Environment

To obtain high yields of monocyclic aromatic hydrocarbons with methyl side chains,such as toluene and xylene,methane(CH_(4))can be introduced into the hydrocracking of polycyclic aromatic hydrocarbons.CH_(4)can participate in the reaction,supply methyl side chains to the product,and improve product distribution.In this study,the hydrogenation reaction of polycyclic aromatic hydrocarbons over a carbonized NiMo/Hβcatalyst in a CH_(4)and hydrogen(H_(2))environment was investigated to study the promotional effect of CH_(4)on the hydrocracking of polycyclic aromatics.Under conditions of 3.5 MPa,380℃,volume air velocity of 4 h^(-1),gas-oil volume ratio of 800,and H_(2):CH_(4)molar ratio of 1:1,the conversion rate of naphthalene was 99.97%,the liquid phase yield was 93.62%,and the selectivity of BTX were 17.76%,25.17%,and 20.47%,respectively.In comparison to the use of a H_(2)atmosphere,the selectivity of benzene was significantly decreased,whereas the selectivity of toluene and xylene were increased.It was shown that CH_(4)can participate in the hydrocracking of naphthalene and improve the selectivity of toluene and xylene in the liquid product.The carbonized NiMo/Hβcatalyst was characterized by a range of analytical methods(such as X-ray diffraction(XRD),ammonia-temperature-programmed desorption(NH3-TPD),hydrogen-temperature-programmed reduction(H_(2)-TPR),and X-ray photoelectron spectroscopy(XPS)).The results indicated that Ni and Mo carbides were the major species in the carbonized NiMo/Hβcatalyst and were considered to be active sites for the activation of CH_(4)and H_(2).After loading the metal components,the catalyst displayed prominent weak acidic sites,which may be suitable locations for cracking,alkylation,and other related reactions.Therefore,the carbonized NiMo/Hβcatalyst displayed multiple functions during the hydrocracking of polycyclic aromatic hydrocarbons in a CH_(4)and H_(2)environment.These results could be used to develop a new way to efficiently utilize polycyclic aromatic hydrocarbons and natural gas resources.

Synthesis of an IMF zeolite membrane for the separation of xylene isomer

The synthesis of a continuous IMF zeolite membrane was fabricated on tubular substrates by seeded growth for the first time. The straight channels of IMF zeolite with diameters of 0.53–0.59 nm are distinguishable for p-xylene from o-xylene molecules. Pure IMF-phase high-silica IM-5 zeolite seeds with uniform and fine crystal size were fabricated by a new sonication-assisted aging process. The seeds were coated on the support by dipcoating and induced the formation of continuous membrane. Separation performance in p-/o-xylene mixture was investigated at various temperature and pressure. The typical IM-5zeolite membrane had p-/o-xylene separation factor of 3.7. Our results suggest that IM-5 zeolite is a potentially good membrane material for the separation of xylene mixtures.

Catalytic Elimination of Oxygenated Byproducts in the Toluene Methylation Process

Catalytic methylation of toluene with methanol is an important alternative pathway for xylene production.Previous studies have indicated that methanol always undergoes several side reactions on acidic zeolites,resulting in oxygencontaining byproducts such as dimethyl ethers,ketones,and carboxylic acids.Herein,the presence and distribution of the oxygenated compounds formed during toluene methylation were firstly examined by systematic chromatographic analysis.Plausible formation mechanisms for the various oxygenates are discussed.The most problematic byproduct is found to be acetic acid,which can lead to inferior product quality and damage downstream units.A feasible solution is presented for oxygenate removal after toluene methylation,in which acetic acid is eliminated by catalytic decomposition into low-boilingpoint acetone over a MgO catalyst.This process allows for all of the low-boiling-point oxygenates,including methanol,dimethyl ether,acetone,and butanone,to be removed from the aromatics phase,taking advantage of the temperature of the reaction effluent and standard distillation equipment.X-ray diffraction was used to characterize the crystal phase of the fresh and used MgO decarbonylation catalysts,while thermogravimetry/mass spectrometry and Fourier-transform infrared spectroscopy were applied to investigate the transformation mechanism of acetic acid over the decarbonylation catalyst.CO insertion and ketonization of acetic acid accounted for the formation and elimination of acetic acid,respectively.The combined methylation/decarbonylation process should enable the production of high-quality xylenes,an important industrial feedstock,by overcoming the main technical obstacles associated with the toluene methylation process.

Enhanced xylene sensing performance of hierarchical flower-like Co_(3)O_(4) via In doping

Metal ions doping is a typical approach for tuning sensing properties of metal oxide semiconductors based gas sensors.Herein,hierarchical flower-like pure and In-doped Co_(3)O_(4) nanostructures assembled by porous two-dimensional(2D)nanosheets are synthesized via a solvothermal method and annealing process.The sensing measurements display that the In@Co_(3)O_(4)-4 based sensor possesses high response value of 55.9 toward 100 ppm xylene at 150 ℃,which is nearly 3.8times larger than that of pure Co_(3)O_(4) sensor.Furthermore,it possesses good selectivity and anti-humidity properties.Combined with the results of DFT calculations,the mechanism of enhanced gas sensing performance is analyzed systematically.

Indoor and outdoor BTX levels in Barcelona City metropolitan area and Catalan rural areas

Five aromatic hydrocarbons (benzene, toluene, and three isomeric xylenes) were monitored in indoor and outdoor air of 7 public buildings and 54 private homes, located in Barcelona City metropolitan area and in several rural areas of Catalonia. The sampling was carried out over four periods: spring-summer and winter of 2000, and summer and winter of 2001. Passive ORSA 5 Dra¨ger samplers were used for benzene, toluene, and xylenes (BTX) adsorption. BTX were extracted with carbon disulphide and analysed using ...

Synthesis of highly active Cu(Ⅰ)-Y(Ⅲ)-Y zeolite and its selective adsorption desulfurization performance in presence of xylene isomers

A bimetal-exchanged NaY zeolite(Cu(Ⅰ)-Y(Ⅲ)-Y)with a desirable adsorptive desulfurization(ADS)performance was prepared and characterized by means of X-ray diffraction,specific surface area measurements,X-ray fluorescence spectrometer,X-ray photoelectron spectroscopy,thermal gravity analysis and Fourier transform infrared spectroscopy.The effect of Y(Ⅲ)ions on ADS in the presence of the xylenes was investigated.Results indicated that the ADS performance of Y(Ⅲ)-Y is higher than that of most reported CeY.The Y(Ⅲ)-based Cu(Ⅰ)-Y(Ⅲ)-Y demonstrated the higher breakthrough loading than those of reported Ce(Ⅲ)/Ce(Ⅳ)-based transition metal Y zeolites,showing that Y(Ⅲ)ions play a promoting role in improving the ADS selectivity.For Cu(Ⅰ)-Y(Ⅲ)-Y,a new strong S-M interaction(S stands for sulfur,while M stands for metal)active site was formed,which might be caused by the synergistic effect between Cu(Ⅰ)and Y(Ⅲ).The Cu(Ⅰ)-Y(Ⅲ)-Y,which combined the advantages of Cu(I)-Y and Y(Ⅲ)-Y,is a kind of promising adsorbent.The breakthrough loading decreased in the order of Cu(Ⅰ)-Y(Ⅲ)-Y>Y(Ⅲ)-Y>Cu(Ⅰ)-Y,and the effect of xylene isomers on the sulfur removal was in the order of ortho-xylene>meta-xylene>para-xylene,which exhibited the same trend with the bond order of xylenes.

Benzene alkylation with methanol over phosphate modified hierarchical porous ZSM-5 with tailored acidity

The acidity and acid distribution of hierarchical porous ZSM-5 were tailored via phosphate modification. The catalytic results showed that both benzene conversion and selectivity of toluene and xylene increased with the presence of appropriate amount of phosphorus. Meanwhile, side reactions such as methanol to olefins related with the formation of by-product ethylbenzene formation and isomerization of xylene to meta-xylene were suppressed efficiently. The acid strength and sites amount of Br?nsted acid of the catalyst were crucial for improving benzene conversion and yield of xylene, whereas passivation of external surface acid sites played an important role in breaking thermodynamic equilibrium distribution of xylene isomers.

Anaerobic BTEX degradation in soil bioaugmented with mixed consortia under nitrate reducing conditions

Different concentrations of BTEX, including benzene, toluene, ethylbenzene, and three xylene isomers, were added into soil samples to investigate the anaerobic degradation potential by the augmented BTEX-adapted consortia under nitrate reducing conditions. All the BTEX substrates could be anaerobically biodegraded to non-detectable levels within 70 d when the initial concentrations were below 100 mg/kg in soil. Toluene was degraded faster than any other BTEX compounds, and the high-to-low order of degradation rates were toluene 〉 ethylbenzene 〉 m-xylene 〉 o-xylene 〉 benzene 〉 p-xylene. Nitrite was accumulated with nitrate reduction, but the accumulation of nitrite had no inhibitory effect on the degradation of BTEX throughout the whole incubation. Indigenous bacteria in the soil could enhance the BTEX biodegradation ability of the enriched mixed bacteria. When the six BTEX compounds were simultaneously present in soil, there was no apparent inhibitory effect on their degradation with lower initial concentrations. Alternatively, benzene, o-xylene, and p-xylene degradation were inhibited with higher initial concentrations of 300 mg/kg. Higher BTEX biodegradation rates were observed in soil samples with the addition of sodium acetate compared to the presence of a single BTEX substrate, and the hypothesis of primary-substrate stimulation or cometabolic enhancement of BTEX biodegradation seems likely.

Anaerobic biodegradation of benzene series compounds by mixed cultures based on optional electronic acceptors

A series of batch experiments were performed using mixed bacterial consortia to investigate biodegradation performance of benzene, toluene, ethylbenzene and three xylene isomers （BTEX） under nitrate, sulfate and ferric iron reducing conditions. The results showed that toluene, ethylbenzene, m-xylene and o-xylene could be degraded independently by the mixed cultures coupled to nitrate, sulfate and ferric iron reduction. Under ferric iron reducing conditions the biodegradation of benzene and p-xylene could be occurred only in the presence of other alkylbenzenes. Alkylbenzenes can serve as the primary subs＇rates to stimulate the transformation of benzene and p-xylene under anaerobic conditions. Benzene and p-xylene are more toxic than toluene and ethylbenzene, under the three terminal electron acceptors conditions, the degradation rates decreased with toluene 〉 ethylbenzene 〉 m-xylene 〉 o-xylene〉 benzene 〉 p- xylene. Nitrate was a more favorable electron acceptor compared to sulfate and ferric iron. The ratio between sulfate consumed and the loss of benzene, toluene, ethylbenzene, o-xylene, m-xylene, p-xylene was 4.44, 4.51, 4.42, 4.32, 4.37 and 4.23, respectively; the ratio between nitrate consumed and the loss of these substrates was 7.53, 6.24, 6.49, 7.28, 7.81, 7.61, respectively; the ratio between the consumption of ferric iron and the loss of toluene, ethylbenzene, o-xylene, m-xylene was 17.99, 18.04, 18.07, 17.97, respectively.

Roles of Emerging FCC-based Technologies in Shifting to Petrochemicals Production

The emerging FCC-based technologies are applied in an attempt to shift to the production of designated light olefins(including mainly ethylene and propylene) as well as light aromatics(including benzene, toluene, and xylene)developed by the Research Institute of Petroleum Processing(RIPP), SINOPEC. The RIPP's proprietary technologies covering the Deep Catalytic Cracking(DCC), the Enhanced Deep Catalytic Cracking(DCC-PLUS), and the Maximizing Catalytic Propylene(MCP) have been playing decisive roles in the processing of crude aimed at closer integration of petroleum refining and petrochemical production both inside and outside of China since 1990. Three cases of commercial applications in five refineries, including Case Ⅰ— the closer integration between the steam cracker and the DCC/DCC-PLUS unit, Case Ⅱ— the petrochemical refinery provided with a DCC-PLUS unit, and Case Ⅲ— the integrated petrochemical/fuels refinery provided with a MCP unit, have highlighted their far-reaching effects on global petrochemicals production.

Occupational Health Risk Assessment of Benzene,Toluene,and Xylene in Shanghai

Objective This study was designed to conduct a retrospective and systematic occupational health risk assessment(OHRA)of enterprises that used benzene,toluene,and xylene(BTX)in Shanghai,China.Methods All data for the study were obtained from 1,705 occupational health examination and evaluation reports from 2013 to 2017,and a semiquantitative model following Chinese OHRA guidelines(GBZ/T 298-2017)was applied for the assessment.Results The selected enterprises using BTX were mainly involved in manufacturing of products.Using the exposure level method,health risk levels associated with exposure to BTX were classified as medium,negligible,or low.However,the risk levels associated with benzene and toluene were significantly different according to job types,with gluers and inkers exhibiting greater health risks.For the same job type,the health risk levels assessed using the comprehensive index method were higher than those using the exposure level method.Conclusion Our OHRA reveals that workers who are exposed to BTX still face excessive health risk.Additionally,the risk level varied depending on job categories and exposure to specific chemicals.Therefore,additional control measures recommended by OHRA guidelines are essential to reduce worker exposure levels.

Disproportionation of ethylbenzene in the presence of C_8 aromatics

The selective synthesis of p-diethylbenzene （p-DEB） by disproportionation of ethylbenzene （EB） in the presence of aromatics like m- and p- xylene isomers has been studied over a pore size regulated HZSM-5 catalyst. The industrial feed having different compositions of ethylbenzene and xylene isomers was used for the experimentation. Hence, they were expected to hinder the movement of reactant molecules both on the external surface and within the zeolite channels. It was observed that irrespective of the different feed compositions the concentration of the xylene isomers was intact in the product. There is no other byproducts formation like para-ethylmethyl benzene. The effects of varying the concentration of aromatic compounds in the feed on ethylbenzene conversion and product distribution over the parent and modified H-ZSM-5 catalyst have been discussed. Ethylbenzene disproportionation reaction follows the pseudo first order reaction with an activation energy of 8.6 kcal/mol.

可见光响应碳掺杂的光催化剂涂覆于塞流反应器上分解气态芳香化合物(英文)

A plug‐flow reactor coated with carbon‐doped TiO2 (C‐TiO2 ) powder was investigated for the control of vaporous aromatics (benzene, toluene, ethylbenzene, and o‐xylene (BTEX)) under a range of experimental conditions. The characteristics of the as‐prepared C‐TiO2 and a reference Degussa P25 TiO2 powder were examined using X‐ray diffraction, scanning electron microscopy, diffuse‐reflectance ultraviolet‐visible‐near infrared spectroscopy, and Fourier transform infrared spectroscopy. The experimental conditions for the photocatalytic performance of the as‐prepared C‐TiO2 photocatalyst were controlled using three operational parameters, relative humidity, flow rate, and input concentration. Unlike other target compounds, very little benzene was removed by the C‐TiO2 photocatalyst under visible‐light irradiation. In contrast, the C‐TiO2 exhibited higher removal efficiencies for the other three target compounds (toluene, ethylbenzene, and xylene) compared with those achieved using unmodified TiO2 under visible‐light irradiation. The highest removal efficiency was obtained at a relative humidity value of 45%. Specifically, the toluene removal efficiency determined at a relative humidity of 45% was 78%, whereas it was close to 0%, 7.2%, and 5.5% for relative humidity values of 20%, 70%, and 95%, respectively. In addition, the removal efficiencies for the three target compounds decreased as the flow rate or input concentration increased. These findings indicate that the as‐prepared C‐TiO2 photocatalyst could be used for the removal of toxic vaporous aromatics under optimized operating conditions.

Comparative study of a vitrinite-rich and an inertinite-rich Witbank coal (South Africa) using pyrolysis-gas chromatography

This study aims to compare iso-rank vitrinite-rich and inertinite-rich coal samples to understand the impact of coal-forming processes on pyrolysis chemistry.A medium rank C bituminous coal was density-fractionated to create a vitrinite-rich and an inertinite-rich sub-sample.The vitrinite-rich sample has 83 vol% total vitrinite (mineral-matter-free basis),whereas the inertinite-rich counterpart has 66 vol% total inertinite.The vitrinite-rich sample is dominated by collotelinite and collodetrinite.Fusinite,semifusinite,and inertodetrinite are the main macerals of the inertinite-rich sample.Molecular chemistry was assessed using a pyrolysis gas chromatograph (py-GC) equipped with a thermal desorption unit coupled to a time of flight mass spectrometer (MS) (py-GC/MS) and solid-state nuclear magnetic resonance (13C CP-MAS SS NMR).The pyrolysis products of the coal samples are generally similar,comprised of low and high molecular weight alkanes,alkylbenzenes,alkylphenols,and alkyl-subtituted polycyclic aromatic hydrocarbons,although the vitrinite-rich sample is chemically more diverse.The lack of diversity exhibited by the inertinite-rich sample upon pyrolysis may be interpreted to suggest that major components were heated in their geologic history.Based on the 13C CP-MAS SS NMR analysis,the inertinite-rich sample has a greater fraction of phenolics,reflected in the py-GC/MS results as substituted and unsubstituted derivatives.The greater abundance of phenolics for the inertinite-rich sample may suggest a fire-related origin for the dominant macerals of this sample.The C2-alkylbenzene isomers (p-xylene and o-xylene) were detected in the pyrolysis products for the vitrinite-rich and inertinite-rich samples,though more abundant in the former.The presence of these in both samples likely reflects common source vegetation for the dominant vitrinite and inertinite rnacerals.

Seasonal and Spatial Variation of BTEX in Ambient Air of Delhi

The present study aims to provide an indication of ambient levels of BTEX in the immediate vicinity of petrol filling stations in Delhi & other road side corridors of Delhi. In this study spatial and seasonal variation of BTEX has been measured at different locations in Delhi. For the measurement of VOCs, passive based diffusion methodology was adopted for the adsorption of BTEX over the activated charcoal. Four categories of sampling sites were chosen (residential, traffic junctions, road side corridors and petrol pumps). The result confirms that the aromatic concentrations in the ambient air of gas stations are appreciably higher than the average values in locations with high vehicular flux. The mean concentration of BTEX at all the locations was 0.622μg/m3, 0.361 μg/m3, 1.037 μg/m3 and 0.122 μg/m3. The average concentration of benzene was highest at petrol pump 3.5 μg/m3 however at all other sampling sites it was in the range of 0.294 to 0.712 μg/m3. The mean concentration value shows that the xylene concentration dominates more in Delhi as compared to benzene. The total average BTEX concentration at road side corridors was 0.594 μg.m-3, at residential corridors was 0.262 μg.m-3, at intersections it was 0.649 μg.m-3 and at petrol filling stations it was 1.457 μg.m-3. The concentration was in the order of petrol filling stations > intersections > road side corridors > residence. These data show the predominance of diesel driven vehicles in Delhi since xylene mainly comes from diesel exhausts. The influential VOC species in case of diesel engine exhaust are benzene, ethylbenzene, xylenes, propane, n-decane and undecane and in case of gasoline vehicle exhaust influential species are benzene, ethylbenzene, 1,2,4-methylbenzene, 1,3,5-methylbenzene, n-hexane and 2-methylhexane. So xylene is mainly coming from diesel exhaust since gasoline vehicle exhaust doesn’t show this species.

Determination of hemoglobin adduct of a musk xylene metabolite in trout as biomarker of exposure by gas chromatography mass spectrometry

Musk xylene（MX） is frequently used as fragrances in formulation of personal care products. Quantification of a bound 4-amino- MX（4-AMX） as cysteine adducts in trout hemoglobin（Hb） was made by gas chromatography-ion trap-mass spectrometry（GC/MS）. The Hb samples were collected from trout after 24 h exposure to MX at 10μg/g, and or menhaden oil（control）. The formation of cysteine-Hb adduct was observed from nitroso derivative of MX, released by alkaline hydrolysis. The released 4-AMX metabolite was extracted in n- hexane. The extract was then reduced by evaporation, and analyzed by GC/MS. When similar agreement of mass spectral features and retention time of 4-AMX were obtained in both standard and sample solutions, the presence of 4-AMX metabolite in the Hb was confirmed. The concentration of 4-AMX was found to be 3.1 × 10^-6 6.9 × 10^-6 mg/g in the Hb solution. Quantitation was made based on an internal standard, a calibration plot, and response factor. In the non-hydrolyzed and laboratory blank extracts, the 4-AMX metabolite was not detected. Additionally, coeluting and interfefing ions were observed in the biological samples.