The dependency of the steady-state yaw rate model on vehicle weight and its distribution is studied in this paper. A speed-dependent adjustment of the yaw rate model is proposed to reduce the yaw rate estimation error...The dependency of the steady-state yaw rate model on vehicle weight and its distribution is studied in this paper. A speed-dependent adjustment of the yaw rate model is proposed to reduce the yaw rate estimation error. This new methodology allows the calibration engineer to minimize the yaw rate estimation error caused by the different weight conditions without going through the calibration process multiple times. It is expected that this modified yaw rate model will improve the performance of Electronic Stability Control (ESC) systems such as response time and robustness.展开更多
Design of an Ethernet network compatible data acquisition system for the measurement of yaw rate and longitudinal velocity in automobiles is presented.The data acquisition system includes a base node and a remote node...Design of an Ethernet network compatible data acquisition system for the measurement of yaw rate and longitudinal velocity in automobiles is presented.The data acquisition system includes a base node and a remote node.The remote node consists of a micro electro mechanical system(MEMS)accelerometer,an MEMS gyroscope,an advanced RISC machines(ARM)CORTEX M3 microcontroller and an Ethernet PHY device.The remote node measures the yaw rate and the longitudinal velocity of an automobile and sends the measured values to the base node using Ethernet communication.The base node consists of an ARM CORTEX M3 microcontroller and an Ethernet PHY device.The base node receives the measured values and saves in a microSD card for further analysis.The characteris tics of the net work and the measurement system are stu died and repor ted.展开更多
The lateral control for lane changing of intelligent vehicle on curved road in automatic highway systems was studied. Based on trapezoidal acceleration profile, considering the curvature difference between starting la...The lateral control for lane changing of intelligent vehicle on curved road in automatic highway systems was studied. Based on trapezoidal acceleration profile, considering the curvature difference between starting lane and target lane, a new virtual trajectory planning method for lane changing on curved road was presented, and the calculating formulas for ideal states of vehicle in the inertial coordinate system during a lane changing maneuver were established. Applying the predetermined trajectory, the reference yaw angle and yaw rate for lane changing were generated. On the assumption that the information on yaw rate of vehicle can be measured with on-board sensors and based on the lateral dynamical model of vehicle, the yaw-rate-tracking control law was designed by applying nonsingular terminal sliding mode technology. Based on Lyapunov function method, the finite-time convergence property of the system was obtained from the phase-plane analysis. Simulation results showed that if the curvature difference between starting lane and target lane was not considered, then at the finishing time of lane changing, it was impossible to avoid the deviation of the virtual trajectory panned from the target lane, which increased with the decrease of curvature radius. With the trajectory planning method and yaw rate-tracking control law proposed in this paper and considering the curvature difference between the starting lane and target lane, the desired virtual trajectory for lane changing without deviation was obtained and the expected tracking performance was also verified by the simulation.展开更多
文摘The dependency of the steady-state yaw rate model on vehicle weight and its distribution is studied in this paper. A speed-dependent adjustment of the yaw rate model is proposed to reduce the yaw rate estimation error. This new methodology allows the calibration engineer to minimize the yaw rate estimation error caused by the different weight conditions without going through the calibration process multiple times. It is expected that this modified yaw rate model will improve the performance of Electronic Stability Control (ESC) systems such as response time and robustness.
文摘Design of an Ethernet network compatible data acquisition system for the measurement of yaw rate and longitudinal velocity in automobiles is presented.The data acquisition system includes a base node and a remote node.The remote node consists of a micro electro mechanical system(MEMS)accelerometer,an MEMS gyroscope,an advanced RISC machines(ARM)CORTEX M3 microcontroller and an Ethernet PHY device.The remote node measures the yaw rate and the longitudinal velocity of an automobile and sends the measured values to the base node using Ethernet communication.The base node consists of an ARM CORTEX M3 microcontroller and an Ethernet PHY device.The base node receives the measured values and saves in a microSD card for further analysis.The characteris tics of the net work and the measurement system are stu died and repor ted.
基金supported by the National Natural Science Foundation of China (Grant No. 10772152)the Natural Science Foundation of Shandong Province of China (Grant No. ZR2010FM008)
文摘The lateral control for lane changing of intelligent vehicle on curved road in automatic highway systems was studied. Based on trapezoidal acceleration profile, considering the curvature difference between starting lane and target lane, a new virtual trajectory planning method for lane changing on curved road was presented, and the calculating formulas for ideal states of vehicle in the inertial coordinate system during a lane changing maneuver were established. Applying the predetermined trajectory, the reference yaw angle and yaw rate for lane changing were generated. On the assumption that the information on yaw rate of vehicle can be measured with on-board sensors and based on the lateral dynamical model of vehicle, the yaw-rate-tracking control law was designed by applying nonsingular terminal sliding mode technology. Based on Lyapunov function method, the finite-time convergence property of the system was obtained from the phase-plane analysis. Simulation results showed that if the curvature difference between starting lane and target lane was not considered, then at the finishing time of lane changing, it was impossible to avoid the deviation of the virtual trajectory panned from the target lane, which increased with the decrease of curvature radius. With the trajectory planning method and yaw rate-tracking control law proposed in this paper and considering the curvature difference between the starting lane and target lane, the desired virtual trajectory for lane changing without deviation was obtained and the expected tracking performance was also verified by the simulation.