A systematic approach was adopted to investigate the nutrient limiting factors in gray-brown purple soils and yellow soils derived from limestone in Chongqing, China, to study balanced fertilization for corn, sweet po...A systematic approach was adopted to investigate the nutrient limiting factors in gray-brown purple soils and yellow soils derived from limestone in Chongqing, China, to study balanced fertilization for corn, sweet potato and wheat in rotation. The results showed that N, P and K were deficient in both soils, Cu, Mn, S andZn in the gray-brown purple soils and Ca, Mg, Mo and Zn for the yellow soils. Balanced fertilizer application increased yields of corn, sweet potato and wheat by 28.4%, 28.7% and 4.4%, respectively, as compared to the local farmers' practice. The systematic approach can be considered as one of the most efficient and reliable methods in fertility study.展开更多
North China Plain(NCP) is the primary winter wheat production region in China, characterized by smallholder farming systems. Whereas the winter wheat average yield of smallholder farmers is currently low, the yield po...North China Plain(NCP) is the primary winter wheat production region in China, characterized by smallholder farming systems. Whereas the winter wheat average yield of smallholder farmers is currently low, the yield potential and limiting factors driving the current yield gap remain unclear. Therefore, increasing the wheat yield in NCP is essential for the national food security. This study monitored wheat yield, management practices and soil nutrient data in 132 farmers’ fields of Xushui County, Baoding City, Hebei Province during 2014–2016. These data were analyzed using variance and path analysis to determine the yield gap and the contribution of yield components(i.e., spikes per hectare, grain number per spike and 1 000-grain weight) to wheat yield. Then, the limiting factors of yield components and the optimizing strategies were identified by a boundary line approach. The results showed that the attainable potential yield for winter wheat was 10 514 kg ha^–1. The yield gaps varied strongly between three yield groups(i.e., high, middle and low), which were divided by yield level and contained 44 farmers in each group, and amounted to 2 493, 1 636 and 814 kg ha^–1, respectively. For the three yield components, only spikes per hectare was significantly different(P<0.01) among the three yield groups. For all 132 farmers’ fields, correlation between yield and spikes per hectare(r=0.51, P<0.01), was significantly positive, while correlations with grain number per spike(r=–0.16) and 1 000-grain weight(r=–0.10) were not significant. The path analysis also showed that the spikes per hectare of winter wheat were the most important component to the wheat yield. Boundary line analysis showed that seeding date was the most limiting factor of spikes per hectare with the highest contribution rate(26.7%), followed by basal N input(22.1%) and seeding rate(14.5%), which indicated that management factors in the seeding step were the most important for affecting spikes per hectare. For desired spikes per hectare(>6.598×10^6 ha^–1),the seeding rate should range from 210–300 kg ha^–1, seeding date should range from 3th to 8th October, and basal N input should range from 90–180 kg ha^–1. Compared to these reasonable ranges of management measures, most of the farmers’ practices were not suitable, and both lower and higher levels of management existed. It is concluded that the strategies for optimizing yield components could be achieved by improving wheat seeding quality and optimizing farmers’ nutrient management practices in the NCP.展开更多
The surface yield strength(σ<sub>ms</sub>)for various carbon steels was studied by means of X-raydiffraction method.The results showed that it is.far below the bulk yield strength,and is theresistance aga...The surface yield strength(σ<sub>ms</sub>)for various carbon steels was studied by means of X-raydiffraction method.The results showed that it is.far below the bulk yield strength,and is theresistance against plastic deformation in the surface layer.The smooth fatigue limit is associ-ated with crack initiation which is a result of accumulation of plastic deformation.Experimen-tal results showed the relation of smooth fatigue limit for 50% survival with σ<sub>ms</sub>is σ<sub>ms</sub>=0.81tO 1.02 σ<sub>-1</sub>for different steels.The smooth fatigue limit of a medium carbon steel for 99.9%survival with σ<sub>ms</sub>is σ<sub>ms</sub>=0.98 tO 1.10 σ<sub>-1</sub>.It is less expensive and time consuming to measureσ<sub>ms</sub>than σ<sub>-1</sub>.展开更多
Significantly increasing temperature since the 1980s in China has become a consensus under the background of global climate change and how climate change affects agriculture or even cropping systems has attracted more...Significantly increasing temperature since the 1980s in China has become a consensus under the background of global climate change and how climate change affects agriculture or even cropping systems has attracted more and more attention from Chinese government and scientists. In this study, the possible effects of climate warming on the national northern limits of cropping systems, the northern limits of winter wheat and double rice, and the stable-yield northern limits of rainfed winter wheat-summer maize rotation in China from 1981 to 2007 were analyzed. Also, the possible change of crop yield caused by planting limits displacement during the periods 1950s-1981 and 1981-2007 was compared and discussed. The recognized calculation methods of agricultural climatic indices were employed. According to the indices of climatic regionalization for cropping systems, the national northern limits of cropping systems, winter wheat and double rice, and the stable-yield northern limits of rainfed winter wheat-summer maize rotation during two periods, including the 1950s-1980 and 1981-2007, were drawn with ArcGIS software. Compared with the situation during the 1950s- 1980, the northern limits of double cropping system during 1981-2007 showed significant spatial displacement in Shaanxi, Shanxi, Hebei, and Liaoning provinces and Beijing municipality, China. The northern limits of triple cropping system showed the maximum spatial displacement in Hunan, Hubei, Anhui, Jiangsu, and Zhejiang provinces, China. Without considering variety change and social economic factors, the per unit area grain yield of main planting patterns would increase about 54-106% if single cropping system was replaced by double cropping system, which turned out to be 27- 58% if double cropping system was replaced by triple cropping system. In Liaoning, Hebei, Shanxi, Shaanxi, Gansu, and Qinghai provinces, Inner Mongolia and Ningxia autonomous regions, China, the northern limits of winter wheat during 1981-2007 moved northward and expanded westward in different degrees, compared with those during the 1950s-1980. Taking Hebei Province as an example, the northern limits of winter wheat moved northward, and the per unit area grain yield would averagely increase about 25% in the change region if the spring wheat was replaced by winter wheat. In Zhejiang, Anhui, Hubei, and Hunan provinces, China, the planting northern limits of double rice moved northward, and the per unit area grain yield would increase in different degrees only from the perspective of heat resource. The stable- yield northern limits of rainfed winter wheat-summer maize rotation moved southeastward in most regions, which was caused by the decrease of local precipitation in recent years. During the past 50 yr, climate warming made the national northern limits of cropping systems move northward in different degrees, the northern limits of winter wheat and double rice both moved northward, and the cropping system change would cause the increase of per unit area grain yield in the change region. However, the stable-yield northern limits of rainfed winter wheat-summer maize rotation moved southeastward due to the decrease of precipitation.展开更多
The drought in spring leads to the lack of soil water, which influents sprout and bud of crops, which furthermore affects growth and yield of crops. Studying the technology integration of bed-irrigating sowing, the me...The drought in spring leads to the lack of soil water, which influents sprout and bud of crops, which furthermore affects growth and yield of crops. Studying the technology integration of bed-irrigating sowing, the mending irrigation of seedling stage and the effect of water-saving of ridge plotted field, analyzing the finger of yield and dry matter accumulation, water-saving technology integration have good effects on water-saving, water storage and increasing moisture on soil and enhancement of soybean yield.展开更多
Seismic permanent displacement of the soil walls plays an important role in design of these structures. Due to the increase in growth of urban areas and the limitations in use of flat grounds, many structures are buil...Seismic permanent displacement of the soil walls plays an important role in design of these structures. Due to the increase in growth of urban areas and the limitations in use of flat grounds, many structures are built near slopes and retaining walls. During earthquakes, these structures can apply an additional surcharge on the wall. The intensity and location of the surcharge is of considerable importance on the seismic displacements of the soil wall. In this study, by using the limit analysis and upper bound theorem, seismic permanent displacement of the soil wall under surcharge has been analyzed. Thus, a formulation is presented for calculating the yield acceleration and seismic displacement for different surcharge conditions. The effect of seismic acceleration, surcharge intensity, its location and soil properties is investigated. A parameter called the "displacement coefficient" is proposed, and is a potential modification for Newmark's sliding-block method.展开更多
The elastic-plastic method is often used in designing the inner flat bulkhead plates of submarines, and the upper structure of ships and drilling platforms. Such bulkhead plates can bear the load only once. For the im...The elastic-plastic method is often used in designing the inner flat bulkhead plates of submarines, and the upper structure of ships and drilling platforms. Such bulkhead plates can bear the load only once. For the improvement of the load-carrying capacity or the reduction of the weight of plates, the yield line analytical method is employed in this paper to design the bulkhead plate to improve economy and increase the effiective load. Besides, a further sutdy of this method has been made theoretically and experimentally, and the data of the limited load-carrying capacity of the plate have been obtained. Furthermore, the safety coefficients for such a method are presented, which can be used as reference for related departments and staffs.展开更多
文摘A systematic approach was adopted to investigate the nutrient limiting factors in gray-brown purple soils and yellow soils derived from limestone in Chongqing, China, to study balanced fertilization for corn, sweet potato and wheat in rotation. The results showed that N, P and K were deficient in both soils, Cu, Mn, S andZn in the gray-brown purple soils and Ca, Mg, Mo and Zn for the yellow soils. Balanced fertilizer application increased yields of corn, sweet potato and wheat by 28.4%, 28.7% and 4.4%, respectively, as compared to the local farmers' practice. The systematic approach can be considered as one of the most efficient and reliable methods in fertility study.
基金supported by the National Basic Research Program of China (2015CB150405)the Special Fund for Agro-scientific Research in the Public Interest, China (201103003)
文摘North China Plain(NCP) is the primary winter wheat production region in China, characterized by smallholder farming systems. Whereas the winter wheat average yield of smallholder farmers is currently low, the yield potential and limiting factors driving the current yield gap remain unclear. Therefore, increasing the wheat yield in NCP is essential for the national food security. This study monitored wheat yield, management practices and soil nutrient data in 132 farmers’ fields of Xushui County, Baoding City, Hebei Province during 2014–2016. These data were analyzed using variance and path analysis to determine the yield gap and the contribution of yield components(i.e., spikes per hectare, grain number per spike and 1 000-grain weight) to wheat yield. Then, the limiting factors of yield components and the optimizing strategies were identified by a boundary line approach. The results showed that the attainable potential yield for winter wheat was 10 514 kg ha^–1. The yield gaps varied strongly between three yield groups(i.e., high, middle and low), which were divided by yield level and contained 44 farmers in each group, and amounted to 2 493, 1 636 and 814 kg ha^–1, respectively. For the three yield components, only spikes per hectare was significantly different(P<0.01) among the three yield groups. For all 132 farmers’ fields, correlation between yield and spikes per hectare(r=0.51, P<0.01), was significantly positive, while correlations with grain number per spike(r=–0.16) and 1 000-grain weight(r=–0.10) were not significant. The path analysis also showed that the spikes per hectare of winter wheat were the most important component to the wheat yield. Boundary line analysis showed that seeding date was the most limiting factor of spikes per hectare with the highest contribution rate(26.7%), followed by basal N input(22.1%) and seeding rate(14.5%), which indicated that management factors in the seeding step were the most important for affecting spikes per hectare. For desired spikes per hectare(>6.598×10^6 ha^–1),the seeding rate should range from 210–300 kg ha^–1, seeding date should range from 3th to 8th October, and basal N input should range from 90–180 kg ha^–1. Compared to these reasonable ranges of management measures, most of the farmers’ practices were not suitable, and both lower and higher levels of management existed. It is concluded that the strategies for optimizing yield components could be achieved by improving wheat seeding quality and optimizing farmers’ nutrient management practices in the NCP.
文摘The surface yield strength(σ<sub>ms</sub>)for various carbon steels was studied by means of X-raydiffraction method.The results showed that it is.far below the bulk yield strength,and is theresistance against plastic deformation in the surface layer.The smooth fatigue limit is associ-ated with crack initiation which is a result of accumulation of plastic deformation.Experimen-tal results showed the relation of smooth fatigue limit for 50% survival with σ<sub>ms</sub>is σ<sub>ms</sub>=0.81tO 1.02 σ<sub>-1</sub>for different steels.The smooth fatigue limit of a medium carbon steel for 99.9%survival with σ<sub>ms</sub>is σ<sub>ms</sub>=0.98 tO 1.10 σ<sub>-1</sub>.It is less expensive and time consuming to measureσ<sub>ms</sub>than σ<sub>-1</sub>.
基金funded by the Mode Construction of Modern Farming System and Supporting Technology Research and Demonstration, China (200803028)
文摘Significantly increasing temperature since the 1980s in China has become a consensus under the background of global climate change and how climate change affects agriculture or even cropping systems has attracted more and more attention from Chinese government and scientists. In this study, the possible effects of climate warming on the national northern limits of cropping systems, the northern limits of winter wheat and double rice, and the stable-yield northern limits of rainfed winter wheat-summer maize rotation in China from 1981 to 2007 were analyzed. Also, the possible change of crop yield caused by planting limits displacement during the periods 1950s-1981 and 1981-2007 was compared and discussed. The recognized calculation methods of agricultural climatic indices were employed. According to the indices of climatic regionalization for cropping systems, the national northern limits of cropping systems, winter wheat and double rice, and the stable-yield northern limits of rainfed winter wheat-summer maize rotation during two periods, including the 1950s-1980 and 1981-2007, were drawn with ArcGIS software. Compared with the situation during the 1950s- 1980, the northern limits of double cropping system during 1981-2007 showed significant spatial displacement in Shaanxi, Shanxi, Hebei, and Liaoning provinces and Beijing municipality, China. The northern limits of triple cropping system showed the maximum spatial displacement in Hunan, Hubei, Anhui, Jiangsu, and Zhejiang provinces, China. Without considering variety change and social economic factors, the per unit area grain yield of main planting patterns would increase about 54-106% if single cropping system was replaced by double cropping system, which turned out to be 27- 58% if double cropping system was replaced by triple cropping system. In Liaoning, Hebei, Shanxi, Shaanxi, Gansu, and Qinghai provinces, Inner Mongolia and Ningxia autonomous regions, China, the northern limits of winter wheat during 1981-2007 moved northward and expanded westward in different degrees, compared with those during the 1950s-1980. Taking Hebei Province as an example, the northern limits of winter wheat moved northward, and the per unit area grain yield would averagely increase about 25% in the change region if the spring wheat was replaced by winter wheat. In Zhejiang, Anhui, Hubei, and Hunan provinces, China, the planting northern limits of double rice moved northward, and the per unit area grain yield would increase in different degrees only from the perspective of heat resource. The stable- yield northern limits of rainfed winter wheat-summer maize rotation moved southeastward in most regions, which was caused by the decrease of local precipitation in recent years. During the past 50 yr, climate warming made the national northern limits of cropping systems move northward in different degrees, the northern limits of winter wheat and double rice both moved northward, and the cropping system change would cause the increase of per unit area grain yield in the change region. However, the stable-yield northern limits of rainfed winter wheat-summer maize rotation moved southeastward due to the decrease of precipitation.
基金Nature Science Fund Project in Heilongjiang Province (C2004-10)
文摘The drought in spring leads to the lack of soil water, which influents sprout and bud of crops, which furthermore affects growth and yield of crops. Studying the technology integration of bed-irrigating sowing, the mending irrigation of seedling stage and the effect of water-saving of ridge plotted field, analyzing the finger of yield and dry matter accumulation, water-saving technology integration have good effects on water-saving, water storage and increasing moisture on soil and enhancement of soybean yield.
文摘Seismic permanent displacement of the soil walls plays an important role in design of these structures. Due to the increase in growth of urban areas and the limitations in use of flat grounds, many structures are built near slopes and retaining walls. During earthquakes, these structures can apply an additional surcharge on the wall. The intensity and location of the surcharge is of considerable importance on the seismic displacements of the soil wall. In this study, by using the limit analysis and upper bound theorem, seismic permanent displacement of the soil wall under surcharge has been analyzed. Thus, a formulation is presented for calculating the yield acceleration and seismic displacement for different surcharge conditions. The effect of seismic acceleration, surcharge intensity, its location and soil properties is investigated. A parameter called the "displacement coefficient" is proposed, and is a potential modification for Newmark's sliding-block method.
文摘The elastic-plastic method is often used in designing the inner flat bulkhead plates of submarines, and the upper structure of ships and drilling platforms. Such bulkhead plates can bear the load only once. For the improvement of the load-carrying capacity or the reduction of the weight of plates, the yield line analytical method is employed in this paper to design the bulkhead plate to improve economy and increase the effiective load. Besides, a further sutdy of this method has been made theoretically and experimentally, and the data of the limited load-carrying capacity of the plate have been obtained. Furthermore, the safety coefficients for such a method are presented, which can be used as reference for related departments and staffs.
