A review and research on comprehensive characterization of microscopic shale gas reservoir space

In this paper,substantial domestic and foreign research results of microscopic shale reservoir space were systemically reviewed,the research history consisting of simple observation and qualitative classification,quantitative research,the combination of qualitative and quantitative research successively as well as the characteristics of each research stage were summarized.In addition,the current problems existing in the characterization methods of shale reservoir space were also analyzed.Furthermore,based on massive actual detection of typical core samples obtained from more than 50 global shale gas wells and relevant practical experience,a comprehensive characterization method of combining qualitative with the semiquantitative characterization was put forward.In detail,the indicators of the qualitative characterization include pore combination type and organic-matter microscopic morphology type,while the core elements of the semi-quantitative characterization include the percentage of the organic-matter area and the plane porosity of the pores of different types.Based on the reference of the naming and classification of rocks,the three-end-member diagram method was used to characterize microscopic shale reservoir space.This is achieved by plotting the three end-member diagram of 3 kinds of first-order critical reservoir spaces,i.e.,organic-matter pores,matrix pores,and micro-fractures,in order to intuitively present the features of the microscopic pore combination.Meanwhile,statistic histograms of organic-matter microscopic morphology type and the plane porosity of different types of pores were adopted to characterize the development degree of second-order pores quantitatively.By this comprehensive characterization method,the importance of both pore combination and the microscopic morphology of organic matter were emphasized,revealing the control of organic-matter microscopic morphology over the organic-matter pores.What is more,high-resolution FE-SEM was adopted to obtain semi-quantitative statistics results.In this way,the features of pore development and pore combination were quantified,not only reflecting the types and storage capacity of the microscopic shale reservoir space,but also presenting the hydrocarbongenerating potential of organic matter in shale.Therefore,the results of this research are capable of providing in-depth microscopic information for the assessment and exploration and development of shale gas resources.

The “fracture-controlled reserves” based stimulation technology for unconventional oil and gas reservoirs

To solve the problems facing the economic development of unconventional oil and gas, a new concept and corresponding technology system of reservoir stimulation based on "fracture-controlled reserves" are put forward. The "fracture-controlled reserves" stimulation technology is to realize the three-dimensional producing and economic and efficient development of unconventional hydrocarbon resources by forming a fracture system that well matches "sweet spots" and "non-sweet spots". The technical route of the stimulation technology is "three optimizations and controls", that is, control the scope of sand body through optimizing well spacing, control the recoverable reserves through optimizing fracture system, and control the single well production reduction through optimizing energy complement method. The "fracture-controlled reserves" stimulation emphasizes the maximization of the initial stimulation coefficient, the integration of energy replenishment, stimulation and production, and prolonging the re-fracturing cycle or avoiding re-fracturing. It aims at realizing the three-dimensional full producing and efficient development of reservoir in vertical and horizontal directions and achieving the large-scale, sustainable and high profitable development of unconventional oil and gas resources. The stimulation technology was used to perform 20 pilot projects in five typical tight-oil, shale gas blocks in China. The fracturing and producing effects of tight oil improved and the commercial development for shale gas was realized.

Prestack inversion identification of organic reef gas reservoirs of Permian Changxing Formation in Damaoping area, Sichuan Basin, SW China

Organic reef reservoirs in the platform margin of Kaijiang-Liangping trough in Damaoping area, Sichuan Basin are thin in single layer, fast in lateral variation, and have small P-impedance difference from the surrounding rock, it is difficult to identify and predict the reservoirs and fluid properties by conventional post-stack inversion. Through correlation analysis of core test data and logging P-S wave velocity, this work proposed a formula to calculate the shear wave velocity in different porosity ranges, and solved the issue that some wells in the study area have no S-wave data. AVO forward analysis reveals that formation porosity is the main factor affecting the variation of AVO type, the change of water saturation cannot affect the AVO type, but it has an effect on the change range of AVO. Through cross-plotting analysis of elastic parameters, it is found that fluid factor is a parameter sensitive to gas-bearing property of organic reef reservoir in the study area. By comparing results of post-stack impedance inversion, post-stack high frequency attenuation property, pre-stack simultaneous inversion and AVO anomaly analysis of angle gathers, it is found that the gas-bearing prediction of organic reef reservoirs by using fluid factor derived from simultaneous pre-stack inversion had the highest coincidence rate with actual drilling data. At last, according to the characteristics of fluid factor distribution, the favorable gas-bearing area of the organic reef reservoir in Changxing Formation was predicted, and the organic reef trap at the top of Changxing Formation in Block A of Damaoping area was sorted out as the next exploration target.

Oxidation Kinetics of Aluminum Powders in a Gas Fluidized Bed Reactor in the Potential Application of Surge Arresting Materials

In this technical paper, the oxidation mechanism and kinetics of aluminum powders are discussed in great details. The potential applications of spherical aluminum powders after oxidation to be part of the surging arresting materials are discussed. Theoretical calculations of oxidation of spherical aluminum powders in a typical gas fluidization bed are demonstrated. Computer software written by the author is used to carry out the basic calculations of important parameters of a gas fluidization bed at different temperatures. A mathematical model of the dynamic system in a gas fluidization bed is developed and the analytical solution is obtained. The mathematical model can be used to estimate aluminum oxide thickness at a defined temperature. The mathematical model created in this study is evaluated and confirmed consistently with the experimental results on a gas fluidization bed. Detail technical discussion of the oxidation mechanism of aluminum is carried out. The mathematical deviations of the mathematical modeling have demonstrated in great details. This mathematical model developed in this study and validated with experimental results can bring a great value for the quantitative analysis of a gas fluidization bed in general from a theoretical point of view. It can be applied for the oxidation not only for aluminum spherical powders, but also for other spherical metal powders. The mathematical model developed can further enhance the applications of gas fluidization technology. In addition to the development of mathematical modeling of a gas fluidization bed reactor, the formation of oxide film through diffusion on both planar and spherical aluminum surfaces is analyzed through a thorough mathematical deviation using diffusion theory and Laplace transformation. The dominant defects and their impact to oxidation of aluminum are also discussed in detail. The well-controlled oxidation film on spherical metal powders such as aluminum and other metal spherical powders can potentially become an important part of switch devices of surge arresting materials, in general.

Porosity Calculation of Tight Sand Gas Reservoirs with GA-CM Hybrid Optimization Log Interpretation Method

Tight sand gas reservoirs are our country’s fairly rich unconventional natural gas resources, and their exploration and development is of prime importance. Sulige Gas Field which located in the northern Ordos Basin is tight sand gas reservoirs. It is typically featured by low porosity and low permeability, and the error of porosity calculation by traditional methods is larger. Multicomponent explanation model is built by analyzing the thin slice data, and the objective function is got according to the concept of optimization log interpretation method. This paper puts the Genetic Algorithm and the Complex Algorithm together to form the GA-CM Hybrid Algorithm for searching the optimal solution of the objective function, getting the porosity of tight sandstone gas reservoirs. The deviation got by this method is lesser compared with the core porosity, with a high reliability.

Pore Structure Heterogeneity of the Xiamaling Formation Shale Gas Reservoir in the Yanshan Area of China: Evaluation of Geological Controlling Factors

Micro-heterogeneity is an integral parameter of the pore structure of shale gas reservoir and it forms an essential basis for setting and adjusting development parameters.In this study,scanning electron microscopy,high-pressure mercury intrusion and low-temperature nitrogen adsorption experiments were used to qualitatively and quantitatively characterize the pore structure of black shale from the third member of the Xiamaling Formation in the Yanshan area.The pore heterogeneity was studied using fractal theory,and the controlling factors of pore development and heterogeneity were evaluated in combination with geochemical parameters,mineral composition,and geological evolution history.The results show that the pore structure of the reservoir was intricate and complicated.Moreover,various types of micro-nano scale pores such as dissolution pores,intergranular pores,interlayer pores,and micro-cracks are well developed in member 3 of the Xiamaling Formation.The average porosity was found to be 6.30%,and the mean value of the average pore size was 4.78 nm.Micropores and transition pores provided most of the storage space.Pore development was significantly affected by the region and was mainly related to the total organic carbon content,vitrinite reflectance and mineral composition.The fractal dimension,which characterizes the heterogeneity,is 2.66 on average,indicating that the pore structure is highly heterogeneous.Fractal dimension is positively correlated with maturity and clay mineral content,while it is negatively correlated with brittle mineral content and average pore size.These results indicate that pore heterogeneity is closely related to thermal history and material composition.Combined with the geological background of this area,it was found that the pore heterogeneity was mainly controlled by the Jurassic magmatism.The more intense the magma intrusion,the stronger the pore heterogeneity.The pore structure and its heterogeneity characteristics present today are a general reflection of the superimposed geological processes of sedimentary-diagenetic-late transformation.The influence of magmatic intrusion on the reservoir is the main geological factor that should be considered for detailed evaluation of the Xiamaling Formation shale gas reservoir in the Yanshan area.

Downhole Microseismic Source Location Based on a Multi-Dimensional DIRECT Algorithm for Unconventional Oil and Gas Reservoir Exploration

Downhole microseismic data has the significant advantages of high signal-to-noise ratio and well-developed P and S waves and the core component of microseismic monitoring is microseismic event location associated with hydraulic fracturing in a relatively high confidence level and accuracy.In this study,we present a multidimensional DIRECT inversion method for microseismic locations and applicability tests over modeling data based on a downhole microseismic monitoring system.Synthetic tests inidcate that the objective function of locations can be defined as a multi-dimensional matrix space by employing the global optimization DIRECT algorithm,because it can be run without the initial value and objective function derivation,and the discretely scattered objective points lead to an expeditious contraction of objective functions in each dimension.This study shows that the DIRECT algorithm can be extensively applied in real downhole microseismic monitoring data from hydraulic fracturing completions.Therefore,the methodology,based on a multidimensional DIRECT algorithm,can provide significant high accuracy and convergent efficiency as well as robust computation for interpretable spatiotemporal microseismic evolution,which is more suitable for real-time processing of a large amount of downhole microseismic monitoring data.

Geologic Features of Wangjiatun Deep Gas Reservoirs of Volcanic Rock in Songliao Basin

Wangjiatun gas pool is located at the north part of Xujiaweizi in Songliao basin. Commercial gas flow has been found in the intermediate and acid volcanic rock of upper Jurassic-lower Cretaceous, which makes a breakthrough in deep nature gas prospecting in Songliao basin. The deep natural gas entrapment regularity is discussed in the paper by the study of deep strata, structure and reservoir. Andesite, rhyolite and little pyroclastic rock are the main reservoirs. There are two types of volcanic reservoir space assemblage in this area: the pore and fissure and the pure fissure. Changes had taken place for volcanic reservoir space during long geologic time, which was controlled by tectonic movement and geologic environment. The developed degree of reservoir space was controlled by tectonic movement, weathering and filtering, corrosion and Filling. There are three types of source-reservoir-caprock assemblage in this area: lower source- upper reservoir model, upper source-lower reservoir model and lateral change model. Mudstone in Dengluoku formation and the compacted volcanic rock of upper Jurassic-lower Cretaceous are the caprock for deep gas reservoirs. Dark mudstone of deep lacustrine facies in Shahezi formation and lower part of Dengluoku formation are the source rock of deep gas. It can be concluded that deep gas pools are mainly volcanic lithologic reservoirs.

Helium enrichment theory and exploration ideas for helium-rich gas reservoirs

Using gas and rock samples from major petroliferous basins in the world,the helium content,composition,isotopic compositions and the U and Th contents in rocks are analyzed to clarify the helium enrichment mechanism and distribution pattern and the exploration ideas for helium-rich gas reservoirs.It is believed that the formation of helium-rich gas reservoirs depends on the amount of helium supplied to the reservoir and the degree of helium dilution by natural gas,and that the reservoir-forming process can be summarized as"multi-source helium supply,main-source helium enrichment,helium-nitrogen coupling,and homogeneous symbiosis".Helium mainly comes from the radioactive decay of U and Th in rocks.All rocks contain trace amounts of U and Th,so they are effective helium sources.Especially,large-scale ancient basement dominated by granite or metamorphic rocks is the main helium source.The helium generated by the decay of U and Th in the ancient basement in a long geologic history,together with the nitrogen generated by the cracking of the inorganic nitrogenous compounds in the basement rocks,is dissolved in the water and preserved.With the tectonic uplift,the ground water is transported upward along the fracture to the gas reservoirs,with helium and nitrogen released.Thus,the reservoirs are enriched with both helium and nitrogen,which present a clear concomitant and coupling relationship.In tensional basins in eastern China,where tectonic activities are strong,a certain proportion of mantle-derived helium is mixed in the natural gas.The helium-rich gas reservoirs are mostly located in normal or low-pressure zones above ancient basement with fracture communication,which later experience substantial tectonic uplift and present relatively weak seal,low intensity of natural gas charging,and active groundwater.Helium exploration should focus on gas reservoirs with fractures connecting ancient basement,large tectonic uplift,relatively weak sealing capacity,insufficient natural gas charging intensity,and rich ancient formation water,depending on the characteristics of helium enrichment,beyond the traditional idea of searching for natural gas sweetspots and high-yield giant gas fields simultaneously.

Fine quantitative characterization of high-H2S gas reservoirs under the influence of liquid sulfur deposition and adsorption

In order to clarify the influence of liquid sulfur deposition and adsorption to high-H2S gas reservoirs,three types of natural cores with typical carbonate pore structures were selected for high-temperature and high-pressure core displacement experiments.Fine quantitative characterization of the cores in three steady states(original,after sulfur injection,and after gas flooding)was carried out using the nuclear magnetic resonance(NMR)transverse relaxation time spectrum and imaging,X-ray computer tomography(CT)of full-diameter cores,basic physical property testing,and field emission scanning electron microscopy imaging.The loss of pore volume caused by sulfur deposition and adsorption mainly comes from the medium and large pores with sizes bigger than 1000μm.Liquid sulfur has a stronger adsorption and deposition ability in smaller pore spaces,and causes greater damage to reservoirs with poor original pore structures.The pore structure of the three types of carbonate reservoirs shows multiple fractal characteristics.The worse the pore structure,the greater the change of internal pore distribution caused by liquid sulfur deposition and adsorption,and the stronger the heterogeneity.Liquid sulfur deposition and adsorption change the pore size distribution,pore connectivity,and heterogeneity of the rock,which further changes the physical properties of the reservoir.After sulfur injection and gas flooding,the permeability of TypeⅠreservoirs with good physical properties decreased by 16%,and that of TypesⅡandⅢreservoirs with poor physical properties decreased by 90%or more,suggesting an extremely high damage.This indicates that the worse the initial physical properties,the greater the damage of liquid sulfur deposition and adsorption.Liquid sulfur is adsorbed and deposited in different types of pore space in the forms of flocculence,cobweb,or retinitis,causing different changes in the pore structure and physical property of the reservoir.

Gas-Water Production of a Continental Tight-Sandstone Gas Reservoir under Different Fracturing Conditions

A numerical model of hydraulic fracture propagation is introduced for a representative reservoir(Yuanba continental tight sandstone gas reservoir in Northeast Sichuan).Different parameters are considered,i.e.,the interlayer stress difference,the fracturing discharge rate and the fracturing fluid viscosity.The results show that these factors affect the gas and water production by influencing the fracture size.The interlayer stress difference can effectively control the fracture height.The greater the stress difference,the smaller the dimensionless reconstruction volume of the reservoir,while the flowback rate and gas production are lower.A large displacement fracturing construction increases the fracture-forming efficiency and expands the fracture size.The larger the displacement of fracturing construction,the larger the dimensionless reconstruction volume of the reservoir,and the higher the fracture-forming efficiency of fracturing fluid,the flowback rate,and the gas production.Low viscosity fracturing fluid is suitable for long fractures,while high viscosity fracturing fluid is suitable for wide fractures.With an increase in the fracturing fluid viscosity,the dimensionless reconstruction volume and flowback rate of the reservoir display a non-monotonic behavior,however,their changes are relatively small.

Absolute Internal Energy of the Real Gas

The internal energy U of the real, neutral-gas particles of total mass M in the volume V can have positive and negative values, whose regions are identified in the state chart of the gas. Depending on the relations among gas temperature T, pressure p and mass-specific volume v=V/M, the mass exists as a uniform gas of freely-moving particles having positive values U or as more or less structured matter with negative values U. In the regions U>0?above the critical point [Tc , pc , vc] it holds that p(T,v)>pc and v>vc, and below the critical point it holds that p(T,v)c and v>vv , where vv is the mass-specific volume of saturated vapor. In the adjacent regions with negative internal energy values Uc is the line of equal positive and negative energy contributions and thus represents a line of vanishing internal energy ?U=0. At this level along the critical isochor the ever present microscopic fluctuations in energy and density become macroscopic fluctuations as the pressure decreases on approaching the critical point;these are to be observed in experiments on the critical opalescence. Crossing the isochor vc from U>0 to UΔU>0 happens without any discontinuity. The saturation line vv also separates the regions between U>0 and U , but does not represent a line U=0. The internal-energy values of saturated vapor Uv and condensate Ui can be determined absolutely as functions of vapor pressure p and densities (M/V)v and (M/V)i , repectively, yielding the results Uiv, U=Ui+Uvc and U=Ui=Uv=0 at the critical point. Crossing the line Vv from U=Uv>0 to U=Uv+UiΔU=-Ui>0 to be removed from the particle system. The thermodynamic and quantum-mechanical formulations of the internal energy of a particle system only agree if both the macroscopic and microscopic energy scales have the same absolute energy reference value 0. Arguments for the energy reference value in the state of transition from bound to freely- moving particles in macroscopic classical and microscopic quantum particle systems are discussed.

Development and technology status of energy storage in depleted gas reservoirs

Utilizing energy storage in depleted oil and gas reservoirs can improve productivity while reducing power costs and is one of the best ways to achieve synergistic development of"Carbon Peak–Carbon Neutral"and"Underground Resource Utiliza-tion".Starting from the development of Compressed Air Energy Storage(CAES)technology,the site selection of CAES in depleted gas and oil reservoirs,the evolution mechanism of reservoir dynamic sealing,and the high-flow CAES and injection technology are summarized.It focuses on analyzing the characteristics,key equipment,reservoir construction,application scenarios and cost analysis of CAES projects,and sorting out the technical key points and existing difficulties.The devel-opment trend of CAES technology is proposed,and the future development path is scrutinized to provide reference for the research of CAES projects in depleted oil and gas reservoirs.

Unveiling the Oldest Industrial Shale Gas Reservoir:Insights for the Enrichment Pattern and Exploration Direction of Lower Cambrian Shale Gas in the Sichuan Basin

The lower Cambrian Qiongzhusi(Є1 q)shale in the Sichuan Basin,formerly considered a source rock,recently achieved high gas production(7.388×105 m^(3)·d^(-1))from well Z201 in the Deyang-Anyue rift trough(DART),marking an exploration breakthrough of the world’s oldest industrial shale gas reser-voir.However,the shale gas enrichment mechanism within the DART is not fully understood.This study reviews the formation of the Qiongzhusi shale gas reservoirs within the DART by comparing them with cotemporaneous deposits outside the DART,and several findings are presented.The gas production interval was correlated with the main phase of the Cambrian explosion(lower Cambrian stage 3).In the early Cambrian ecosystem,dominant animals likely accelerated the settling rates of organic matter(OM)in the upper 1st member ofЄ_(1) q(Є_(1) q_(12))by feeding on small planktonic organisms and producing larger organic fragments and fecal pellets.High primary productivity and euxinic con-ditions contributed to OM enrichment in the lower 1st member ofЄ1 q(Є_(1) q_(11)).Additionally,shale reservoirs inside the DART demonstrated better properties than those outside in terms of thickness,brittle minerals,gas content,and porosity.In particular,the abundant OM pores inside the DART facil-itated shale gas enrichment,whereas the higher thermal maturity of the shales outside the DART pos-sibly led to the graphitization and collapse of some OM pores.Meanwhile,the overpressure of high-production wells inside the DART generally reflects better shale gas preservation,benefiting from the shale’s self-sealing nature,"upper capping and lower plugging"configuration,and limited faults and microfractures.Considering these insights,we introduced a"ternary enrichment"model for the Qiongzhusi shale gas.Although the current high gas production of Z201 was found at the reservoir 3,two additional reservoirs were identified with significant potential,thus suggesting a"multilayer stereoscopic development"strategy in future shale gas exploration within the DART.

Formation Mechanism of the Changxing Formation Gas Reservoir in the Yuanba Gas Field,Sichuan Basin,China

In a very gentle platform-margin paleogeographic environment, platform-margin reef flat facies carbonate reservoir rocks were developed in the Changxing Formation of Yuanba field. Later weak structural evolution and diagenetic evolution caused the Changxing Formation to form lithologic traps, with good reservoirs such as dissolved bioclastic dolostone and dissolved pore dolostone. The Changxing Formation gas reservoir is a pseudo-layered porous lithologic gas reservoir under pressure depletion drive, with high H2S and moderate CO2 contents. This paper predictes that the conducting system for the Changxing Formation gas reservoir is possibly composed of the pores and microfractures in the Changxing Formation reservoir, the top erosional surface of the Changxing Formation, as well as the micropores and microfractures in the underlying formations. The Changxing Formation reservoir has experienced 3 hydrocarbon charging stages. This paper suggests that diffusion is the major formation mechanism for this gas reservoir. In the Middle and Late Yanshanian, the Yuanba area entered the major gas charging stage. The gas migrated mainly through diffusion and with the assistance of seepage flow in small faults and microfractures from the source rocks and the other oil-bearing strata to the Changxing Formation carbonate reservoir rocks, forming lithologic gas pools. In the Himalayan Epoch, the lithologic traps were uplifted as a whole without strong modification or overlapping, and were favorable for gas preservation.

Research on thermal insulation materials properties under HTHP conditions for deep oil and gas reservoir rock ITP-Coring

Deep oil and gas reservoirs are under high-temperature conditions,but traditional coring methods do not consider temperature-preserved measures and ignore the influence of temperature on rock porosity and permeability,resulting in distorted resource assessments.The development of in situ temperaturepreserved coring(ITP-Coring)technology for deep reservoir rock is urgent,and thermal insulation materials are key.Therefore,hollow glass microsphere/epoxy resin thermal insulation materials(HGM/EP materials)were proposed as thermal insulation materials.The materials properties under coupled hightemperature and high-pressure(HTHP)conditions were tested.The results indicated that high pressures led to HGM destruction and that the materials water absorption significantly increased;additionally,increasing temperature accelerated the process.High temperatures directly caused the thermal conductivity of the materials to increase;additionally,the thermal conduction and convection of water caused by high pressures led to an exponential increase in the thermal conductivity.High temperatures weakened the matrix,and high pressures destroyed the HGM,which resulted in a decrease in the tensile mechanical properties of the materials.The materials entered the high elastic state at 150℃,and the mechanical properties were weakened more obviously,while the pressure led to a significant effect when the water absorption was above 10%.Meanwhile,the tensile strength/strain were 13.62 MPa/1.3%and 6.09 MPa/0.86%at 100℃ and 100 MPa,respectively,which meet the application requirements of the self-designed coring device.Finally,K46-f40 and K46-f50 HGM/EP materials were proven to be suitable for ITP-Coring under coupled conditions below 100℃ and 100 MPa.To further improve the materials properties,the interface layer and EP matrix should be optimized.The results can provide references for the optimization and engineering application of materials and thus technical support for deep oil and gas resource development.

Production forecasting methods for different types of gas reservoirs

Hydrocarbon production in oil and gas fields generally progresses through stages of production ramp-up,plateau(peak),and decline during field development,with the whole process primarily modeled and forecasted using lifecycle models.SINOPEC's conventional gas reservoirs are dominated by carbonates,low-permeability tight sandstone,condensate,volcanic rocks,and medium-to-high-permeability sandstone.This study identifies the optimal production forecasting models by comparing the fitting coefficients of different models and calculating the relative errors in technically recoverable reserves.To improve forecast precision,it suggests substituting exponential smoothing method-derived predictions for anomalous data caused by subjective influences like market dynamics and maintenance activities.The preferred models for carbonate gas reservoir production forecasts are the generalized Weng's,Beta,Class-I generalized mathematical,and Hu-Chen models.The Vapor pressure and Beta models are optimal for forecasting the annual productivity of wells(APW)from gas-bearing low-permeability tight sandstone reservoirs.The Wang-Li,Beta,and Yu QT tb models are apt for moderate-to-small-reserves,single low-permeability tight sandstone gas reservoirs.The Rayleigh,Hu-Chen,and generalized Weng's models are suitable for condensate gas reservoirs.For medium-to-high-permeability sandstone gas reservoirs,the lognormal,generalized gamma,and Beta models are recommended.

Electrical structure identification of deep shale gas reservoir in complex structural area using wide field electromagnetic method

To fully exploit the technical advantages of the large-depth and high-precision artificial source electromagnetic method in the complex structure area of southern Sichuan and compensate for the shortcomings of the conventional electromagnetic method in exploration depth,precision,and accuracy,the large-depth and high-precision wide field electromagnetic method is applied to the complex structure test area of the Luochang syncline and Yuhe nose anticline in the southern Sichuan.The advantages of the wide field electromagnetic method in detecting deep,low-resistivity thin layers are demonstrated.First,on the basis of the analysis of physical property data,a geological–geoelectric model is established in the test area,and the wide field electromagnetic method is numerically simulated to analyze and evaluate the response characteristics of deep thin shale gas layers on wide field electromagnetic curves.Second,a wide field electromagnetic test is conducted in the complex structure area of southern Sichuan.After data processing and inversion imaging,apparent resistivity logging data are used for calibration to develop an apparent resistivity interpretation model suitable for the test area.On the basis of the results,the characteristics of the electrical structure change in the shallow longitudinal formation of 6 km are implemented,and the transverse electrical distribution characteristics of the deep shale gas layer are delineated.In the prediction area near the well,the subsequent data verification shows that the apparent resistivity obtained using the inversion of the wide field electromagnetic method is consistent with the trend of apparent resistivity revealed by logging,which proves that this method can effectively identify the weak response characteristics of deep shale gas formations in complex structural areas.This experiment,it is shown shows that the wide field electromagnetic method with a large depth and high precision can effectively characterize the electrical characteristics of deep,low-resistivity thin layers in complex structural areas,and a new set of low-cost evaluation technologies for shale gas target layers based on the wide field electromagnetic method is explored.

Evaluation of Well Spacing for Primary Development of Fractured Horizontal Wells in Tight Sandstone Gas Reservoirs

Methods for horizontal well spacing calculation in tight gas reservoirs are still adversely affected by the complexity of related control factors,such as strong reservoir heterogeneity and seepage mechanisms.In this study,the stress sensitivity and threshold pressure gradient of various types of reservoirs are quantitatively evaluated through reservoir seepage experiments.On the basis of these experiments,a numerical simulation model(based on the special seepage mechanism)and an inverse dynamic reserve algorithm(with different equivalent drainage areas)were developed.The well spacing ranges of Classes I,II,and III wells in the Q gas field are determined to be 802–1,000,600–662,and 285–400 m,respectively,with their average ranges as 901,631,and 342.5 m,respectively.By considering both the pairs of parallel well groups and series well groups as examples,the reliability of the calculation results is verified.It is shown that the combination of the two models can reduce errors and provide accurate results.

Phase Transitions and Seepage Characteristics during the Depletion Development of Deep Condensate Gas Reservoirs

Deep condensate gas reservoirs exhibit highly complex and variable phase behaviors,making it crucial to understand the relationship between fluid phase states and flow patterns.This study conducts a comprehensive analysis of the actual production process of the deep condensate gas well A1 in a certain oilfield in China.Combining phase behavior analysis and CMG software simulations,the study systematically investigates phase transitions,viscosity,and density changes in the gas and liquid phases under different pressure conditions,with a reservoir temperature of 165°C.The research covers three crucial depletion stages of the reservoir:single-phase flow,two-phase transition,and two-phase flow.The findings indicate that retrograde condensation occurs when the pressure falls below the dew point pressure,reachingmaximum condensate liquid production at around 25MPa.As pressure decreases,gas phase density and viscosity gradually decrease,while liquid phase density and viscosity show an increasing trend.In the initial single-phase flow stage,maintaining a consistent gas-oil ratio is observed when both bottom-hole and reservoir pressures are higher than the dew point pressure.However,a sudden drop in bottom-hole pressure below the dew point triggers the production of condensate oil,significantly reducing subsequent gas and oil production.In the transitional two-phase flow stage,as the bottom-hole pressure further decreases,the reservoir exhibits a complex flow regime with coexisting areas of gas and liquid.In the subsequent two-phase flow stage,when both bottom-hole and reservoir pressures are below the dew point pressure,a significant increase in the gas-oil ratio is observed.The reservoir manifests a two-phase flow regime,devoid of single-phase gas flow areas.For lowpressure conditions in deep condensate gas reservoirs,considerations include gas injection,gas lift,and cyclic gas injection and production in surrounding wells.Additionally,techniques such as hot nitrogen or CO_(2) injection can be employed to mitigate retrograde condensation damage.The implications of this study are crucial for developing targeted development strategies and enhancing the overall development of deep condensate gas reservoirs.