西藏交通警察道路执法工作的风险与防范

西藏自治区自然、地理与气候环境复杂且特殊,道路交通环境相对恶劣,这导致当地交通警察道路执法工作面临诸多风险,包括警员人身安全和执法效能等风险。对此,文章对西藏交通警察道路执法工作风险进行了调查分析,从地区环境、警员安全意识与技能、执法装备、社会宣传和教育等角度探讨了相关风险的成因,针对性相关风险成因,提出从优化警力配置与道路信息推送、加强警员培训、完善警务装备、加强法治化宣传教育等工作来消除相关风险,以期保障警员安全并改善西藏交通环境。

Analysis for Effects of Temperature Rise of PV Modules upon Driving Distance of Vehicle Integrated Photovoltaic Electric Vehicles

The development of vehicle integrated photovoltaics-powered electric vehicles (VIPV-EV) significantly reduces CO2 emissions from the transport sector to realize a decarbonized society. Although long-distance driving of VIPV-EV without electricity charging is expected in sunny regions, driving distance of VIPV-EV is affected by climate conditions such as solar irradiation and temperature rise of PV modules. In this paper, detailed analytical results for effects of climate conditions such as solar irradiation and temperature rise of PV modules upon driving distance of the VIPV-EV were presented by using test data for Toyota Prius and Nissan Van demonstration cars installed with high-efficiency InGaP/GaAs/InGaAs 3-junction solar cell modules with a module efficiency of more than 30%. The temperature rise of some PV modules studied in this study was shown to be expressed by some coefficients related to solar irradiation, wind speed and radiative cooling. The potential of VIPV-EV to be deployed in 10 major cities was also analyzed. Although sunshine cities such as Phoenix show the high reduction ratio of driving range with 17% due to temperature rise of VIPV modules, populous cities such as Tokyo show low reduction ratio of 9%. It was also shown in this paper that the difference between the driving distance of VIPV-EV driving in the morning and the afternoon is due to PV modules’ radiative cooling. In addition, the importance of heat dissipation of PV modules and the development of high-efficiency PV modules with better temperature coefficients was suggested in order to expand driving range of VIPV-EV. The effects of air-conditioner usage and partial shading in addition to the effects of temperature rise of VIPV modules were suggested as the other power losses of VIPV-EV.

Further Stabilization and Power Density Improvement of Stack-Type Thermoelectric Power Generating Module with Biphasic Medium by Using Various Flexible Metals as Electrodes

In order to realize further stability of a stack-type thermoelectric power generating module (i.e. no electrical connections inside), flexible materials of metal springs and/or rods having restoring forces were installed between lower-temperature-sides of thermoelectric elements. These flexible materials were expected to play three important roles of interpolating different thermal expansions of the module components, enlarging heat removal area and penetration of any media through themselves. Then, a low-boiling-point medium (i.e. NOVEC manufactured by 3M Japan Ltd.) was also applied for a high-speed direct heat removal via its phase change from the lower-temperature-sides of the thermoelectric elements in the proposing stack-type thermoelectric power generating module. No electrical disconnections inside the module were confirmed for more than 9 years of use, indicating further module stability. The power generating density was improved to about 120 mW·m-2 with SUS304 springs having 0.7 mm diameter. Increasing power generating density can be expected in terms of suitable selection of flexible metal with high Vickers hardness, cavities control on the spring surface, more vigorous multiphase flow with adding powders to the medium and optimization of the module configurations according to numerical simulations.

A Multiobjective Optimization Method for Designing <i>M</i>-Channel NPR Cosine Modulated Filter Bank for Image Compression

This paper proposes a method to design multichannel cosine modulated filter bank for image compression using multiobjective optimization technique. The design problem is a combination of stopband residual energy, least square error of the overall transfer function of the filter bank, coding gain with dc leakage free condition as constraint. The proposed algorithm uses Non-dominated Sorting Genetic Algorithm (NSGA) to minimize the mutually contradictory objective function by minimizing filter tap weights of prototype filter. The algorithm solves this problem by searching solutions that achieve the best compromise between the different objectives criteria. The performance of this algorithm is evaluated in terms of coding gain and peak signal to noise ratio (PSNR). Simulation results on different images are included to illustrate the effectiveness of the proposed algorithm for image compression application.

review on the cooling of energy conversion and storage systems using thermoelectric modules

Exploitation of sustainable energy sources requires the use of unique conversion and storage systems,such as solar panels,batteries,fuel cells,and electronic equipment.Thermal load management of these energy conversion and storage systems is one of their challenges and concerns.In this article,the thermal management of these systems using thermoelectric modules is reviewed.The results show that by choosing the right option to remove heat from the hot side of the thermoelectric modules,it will be a suitable local cooling,and the thermoelectric modules increase the power and lifespan of the system by reducing the spot temperature.Thermoelectric modules were effective in reducing panel temperature.They increase the time to reach a temperature above 50℃ in batteries by 3 to 4 times.Also,in their integration with fuel cells,they increase the power density of the fuel cell.

基于学习活动观理念下的教、学、评一致性英语阅读教学课例设计——以外研版《新标准英语》Module 5 Unit 2 If you ever go to London,make sure you visit the Science Museum为例

本文以一节市级送教示范课例改进为载体,探讨阅读教学如何体现英语课程标准的阶段性目标、体现语言学习活动观和阅读教学的层次性,探索指向三位一体教、学、评一致性课例改进的有效途径。1.课例背景本课是2019年大连市名师送教示范活动中的一节阅读课,授课时间为40分钟,授课前先后进行了2次教学改进。本次送教课例研讨主题为教、学、评三位一体的阅读教学改进。

东台市肠出血性大肠埃希菌O157感染监测

目的 为掌握肠出血性大肠埃希菌O15 7在东台市家禽、家畜中的带菌,腹泻病人中的感染和自来水厂水源水中的污染情况。方法 2 0 0 0 -2 0 0 2年,分别在流行季节采集家禽、家畜和腹泻病人粪便及自来水厂水源水,应用免疫磁珠浓集、山梨醇麦康凯平板分离、生化和血清学反应进行鉴定。结果 3年间东台市采集的6种动物粪便有4种中检出肠出血性大肠埃希菌O15 7,其阳性率牛为11 .3 2 %、羊为10 . 5 8%、猪为9. 3 5 %、鸡为7 .73 %。腹泻病人的阳性率为1 .5 7%。采集的178份自来水厂水源水、60只苍蝇标本中均未分离出肠出血性大肠埃希菌O15 7。3株自动物粪便分离株具有至少2种混合型毒力基因。75株肠出血性大肠埃希菌O15 7菌株对15种抗生素存在不同的耐药率。结论 东台市家禽、家畜和腹泻病人中存在肠出血性大肠埃希菌O15 7感染,且存在流行的潜在危险。

Extending the Network Lifetime Using Optimized Energy Efficient Cross Layer Module (OEEXLM) in Wireless Sensor Networks

In wireless sensor network, the primary design is to save the energy consumption as much as possible while achieving the given task. Most of recent researches works have only focused on the individual layer issues and ignore the importance of inter working between different layers in a sensor network. In this paper, we use a cross-layer approach to propose an energy-efficient and extending the life time of the sensor network. This protocol which uses routing in the network layer, and the data scheduling in MAC layer. The main ob-jective of this paper is to provide a possible and flexible approach to solve the conflicts between the require-ments of large scale, long life-time, and multi-purpose wireless sensor networks. This OEEXLM module gives better performance compared to all other existing protocols. The performance of OEEXLM module compared with S-MAC and directed diffusion protocol.

Efficient and Stable Inverted Perovskite Solar Modules Enabled by Solid-Liquid Two-Step Film Formation

A considerable efficiency gap exists between large-area perovskite solar modules and small-area perovskite solar cells.The control of forming uniform and large-area film and perovskite crystallization is still the main obstacle restricting the efficiency of PSMs.In this work,we adopted a solid-liquid two-step film formation technique,which involved the evaporation of a lead iodide film and blade coating of an organic ammonium halide solution to prepare perovskite films.This method possesses the advantages of integrating vapor deposition and solution methods,which could apply to substrates with different roughness and avoid using toxic solvents to achieve a more uniform,large-area perovskite film.Furthermore,modification of the NiO_(x)/perovskite buried interface and introduction of Urea additives were utilized to reduce interface recombination and regulate perovskite crystallization.As a result,a large-area perovskite film possessing larger grains,fewer pinholes,and reduced defects could be achieved.The inverted PSM with an active area of 61.56 cm^(2)(10×10 cm^(2)substrate)achieved a champion power conversion efficiency of 20.56%and significantly improved stability.This method suggests an innovative approach to resolving the uniformity issue associated with large-area film fabrication.

Analysis of thermal management and anti-mechanical abuse of multi-functional battery modules based on magneto-sensitive shear thickening fluid

Electric vehicles(EVs)have garnered significant attention as a vital driver of economic growth and environmental sustainability.Nevertheless,ensuring the safety of high-energy batteries is now a top priority that cannot be overlooked during large-scale applications.This paper proposes an innovative active protection and cooling integrated battery module using smart materials,magneto-sensitive shear thickening fluid(MSTF),which is specifically designed to address safety threats posed by lithium-ion batteries(LIBs)exposed to harsh mechanical and environmental conditions.The theoretical framework introduces a novel approach for harnessing the smoothed-particle hydrodynamics(SPH)methodology that incorporates the intricate interplay of non-Newtonian fluid behavior,capturing the fluid-structure coupling inherent to the MSTF.This approach is further advanced by adopting an enhanced Herschel-Bulkley(H-B)model to encapsulate the intricate rheology of the MSTF under the influence of the magnetorheological effect(MRE)and shear thickening(ST)behavior.Numerical simulation results show that in the case of cooling,the MSTF is an effective cooling medium for rapidly reducing the temperature.In terms of mechanical abuse,the MSTF solidifies through actively applying the magnetic field during mechanical compression and impact within the battery module,resulting in 66%and 61.7%reductions in the maximum stress within the battery jellyroll,and 31.1%and 23%reductions in the reaction force,respectively.This mechanism effectively lowers the risk of short-circuit failure.The groundbreaking concepts unveiled in this paper for active protection battery modules are anticipated to be a valuable technological breakthrough in the areas of EV safety and lightweight/integrated design.

利用热带测雨卫星的测雨雷达资料对1997/1998年ElNio后期热带太平洋降水结构的研究

利用热带测雨卫星的测雨雷达 (TRMMPR)的探测结果 ,对 1 997 1 998年ElNin～o后期热带太平洋的降水结构进行了研究 ,并对比了非ElNin～o的 1 999年和 2 0 0 0年的同期降水情况 ,取得如下结果 :( 1 ) 1 997 1 998ElNin～o后期与非ElNin～o期间相比 ,1 997 1 998ElNin～o后期 ,热带东、中太平洋层云降水和对流云降水的比例明显增大、平均降水率也增大 ,并且层云强降水的比例增多 ,而层云弱降水比例减少。 ( 2 )在非ElNin～o期间 ,热带东、中太平洋对流云降水系统较为浅薄 ,冻结层高度比西太平洋低约 0 5km ;而在 1 997 1 998ElNin～o后期 ,这种差异明显减小 ,热带东、中太平洋对流云降水和层云降水都变得深厚 ;对流云降水和层云降水的降水率随高度的变化也发生了变化。 ( 3)对大气环流的分析表明 ,对应于降水结构的变化 ,热带太平洋地区的高空辐合辐散分布也发生了改变 ,导致Walker环流在 1 997 1 998ElNin～o后期减弱。

Study on Image Recognition Algorithm for Residual Snow and Ice on Photovoltaic Modules

The accumulation of snow and ice on PV modules can have a detrimental impact on power generation,leading to reduced efficiency for prolonged periods.Thus,it becomes imperative to develop an intelligent system capable of accurately assessing the extent of snow and ice coverage on PV modules.To address this issue,the article proposes an innovative ice and snow recognition algorithm that effectively segments the ice and snow areas within the collected images.Furthermore,the algorithm incorporates an analysis of the morphological characteristics of ice and snow coverage on PV modules,allowing for the establishment of a residual ice and snow recognition process.This process utilizes both the external ellipse method and the pixel statistical method to refine the identification process.The effectiveness of the proposed algorithm is validated through extensive testing with isolated and continuous snow area pictures.The results demonstrate the algorithm’s accuracy and reliability in identifying and quantifying residual snow and ice on PV modules.In conclusion,this research presents a valuable method for accurately detecting and quantifying snow and ice coverage on PV modules.This breakthrough is of utmost significance for PV power plants,as it enables predictions of power generation efficiency and facilitates efficient PV maintenance during the challenging winter conditions characterized by snow and ice.By proactively managing snow and ice coverage,PV power plants can optimize energy production and minimize downtime,ensuring a sustainable and reliable renewable energy supply.

Novel nervous and multi-system regenerative therapeutic strategies for diabetes mellitus with mTOR

Throughout the globe,diabetes mellitus（DM） is increasing in incidence with limited therapies presently available to prevent or resolve the significant complications of this disorder.DM impacts multiple organs and affects all components of the central and peripheral nervous systems that can range from dementia to diabetic neuropathy.The mechanistic target of rapamycin（m TOR） is a promising agent for the development of novel regenerative strategies for the treatment of DM.m TOR and its related signaling pathways impact multiple metabolic parameters that include cellular metabolic homeostasis,insulin resistance,insulin secretion,stem cell proliferation and differentiation,pancreatic β-cell function,and programmed cell death with apoptosis and autophagy.m TOR is central element for the protein complexes m TOR Complex 1（m TORC1） and m TOR Complex 2（m TORC2） and is a critical component for a number of signaling pathways that involve phosphoinositide 3-kinase（PI 3-K）,protein kinase B（Akt）,AMP activated protein kinase（AMPK）,silent mating type information regulation 2 homolog 1（Saccharomyces cerevisiae）（SIRT1）,Wnt1 inducible signaling pathway protein 1（WISP1）,and growth factors.As a result,m TOR represents an exciting target to offer new clinical avenues for the treatment of DM and the complications of this disease.Future studies directed to elucidate the delicate balance m TOR holds over cellular metabolism and the impact of its broad signaling pathways should foster the translation of these targets into effective clinical regimens for DM.

Heat dissipation enhancement method for finned heat sink for AGV motor driver's IGBT module

With the widespread use of high-power and highly integrated insulated gate bipolar transistor(IGBT),their cooling methods have become challenging.This paper proposes a liquid cooling scheme for heavy-duty automated guided vehicle(AGV)motor driver in port environment,and improves heat dissipation by analyzing and optimizing the core component of finned heat sink.Firstly,the temperature distribution of the initial scheme is studied by using Fluent software,and the heat transfer characteristics of the finned heat sink are obtained through numerical analysis.Secondly,an orthogonal test is designed and combined with the response surface methodology to optimize the structural parameters of the finned heat sink,resulting in a 14.57%increase in the heat dissipation effect.Finally,the effectiveness of heat dissipation enhancement is verified.This work provides valuable insights into improving the heat dissipation of IGBT modules and heat sinks,and provides guidance for their future applications.

Combined distal tibial rotational osteotomy and proximal growth plate modulation for treatment of infantile Blount's disease

Infantile Blount's disease is a condition that causes genu varum and internal tibial torsion. Treatment options include observation, orthotics, corrective osteotomy, elevation of the medial tibial plateau, resection of a physeal bar, lateral hemi-epiphysiodesis, and guided growth of the proximal tibial physis. Each of these treatment options has its disadvantages. Treating the coronal deformity alone(genu varum) will result in persistence of the internal tibial torsion(the axial deformity). In this report, we describe the combination of lateral growth modulation and distal tibial external rotation osteotomy to correct all the elements of the disease. This has not been described before for treatment of Blount's disease. Both coronal and axial deformities were corrected in this patient. We propose this combination(rather than the lateral growth modulation alone) as the method of treatment for early stages of Blount's disease as it corrects both elements of the disease and in the same time avoids the complications of proximal tibial osteotomy.

Nb2O5—CoO—La2O3复合掺杂的BaTiO3基粉体改性研究

采用铌、钴、镧的金属有机盐(柠檬酸-EDTA复合螯合前驱液)掺杂法实现对氧化硅掺杂的纳米晶BaTiO2粉体的掺杂改性。实验结果表明：随着Nb、Co、La掺量的增加以及Nb／Co比的增大，陶瓷烧结体的烧成收缩以及密度增加，晶粒尺寸减小。随着Nb／Co比的增大，材料的铁电弛豫特性增加。当Nb／Co-2时，随着La掺量的增加，材料的铁电弛豫特性增加。当Nb／Co>2时，La掺量对材料的介电温度特性影响不大。当La掺量一定时随着Nb、Co复合掺量的增加，材料的铁电弛豫特性明显增强。烧结温度的升高，使杂质容易固溶进入BT中，固溶量的增大，使材料的铁电弛豫性能增加。

PCI—SIG宣布推出PCI EXPRESS“EXPRESSMODULE”同时宣布推出全新的PCI Express Base、Card和Mini Card 1.1规范

负责PCI Express^TM业界标准IVO技术的特别兴趣小组PCI—SIG日前宣布，推出PCI Express Express Moduae^TM规范。这个PCI Express规范定义了可热插拔的I/O扩展模块标准，能够大幅度提高企业级服务器和工作站平台的可靠性及设计灵活性。符合Express Modttle规范的产品有望于2005年底面市。

A Novel Multiple DBC-staked units Package to Parallel More Chips for SiC Power Module

Silicon carbide(SiC) power modules play an essential role in the electric vehicle drive system. To improve their performance, reduce their size, and increase production efficiency, this paper proposes a multiple staked direct bonded copper(DBC) unit based power module packaging method to parallel more chips. This method utilizes mutual inductance cancellation effect to reduce parasitic inductance. Because the conduction area in the new package is doubled, the overall area of power module can be reduced. Entire power module is divided into smaller units to enhance manufacture yield, and improve design freedom. This paper provides a detailed design, analysis and fabrication procedure for the proposed package structure. Additionally, this paper offers several feasible solutions for the connection between power terminals and DBC untis. With the structure, 18dies were paralleled for each phase-leg in a econodual size power module. Both simulation and double pulse test results demonstrate that, compared to conventional layouts, the proposed package method has 74.8% smaller parasitic inductance and 34.9% lower footprint.

Preclinical Verification of Modulated Electro-Hyperthermia —Part I. In Vitro Research

Modulated electro-hyperthermia (mEHT) targets tissue’s natural electric and thermal heterogeneities to heat the cancer cells selectively. The applied 13.56 MHz radiofrequency (RF) is a carrier of the low-frequency modulation. The high-frequency part was chosen to select the malignant lesion using the specialties of the tumor: the higher conductivity and dielectric constant of the tumor than its host. The electric field selects the tumor, and the low-frequency amplitude modulation polarizes and excites the transmembrane proteins of the malignant cells. The dominant absorption of the energy by the microscopic clusters of the membrane rafts acts like nanoparticle heating. Exciting the membrane produces various apoptotic signals. The processes were modeled using silico and phantom experiments, which proved the concept. The preclinical verification was made in vitro and in vivo, and in the end, clinical proofs validated the method. Our objective is to follow all the development steps from the laboratory to the clinics in a trilogy of articles. This present is the first part, which deals with in silico, phantom, and in vitro research.

Analysis of Buoyancy Module Auxiliary Installation Technology Based on Numerical Simulation

To reduce the requirement for lifting capacity and decrease the hoist cable force during the descending and laying process of a subsea production system(SPS), a buoyancy module auxiliary installation technology was proposed by loading buoyancy modules on the SPS to reduce the lifting weight. Two models are established, namely, the SPS lowering-down model and the buoyancy module floating-up model. The main study results are the following: 1) When the buoyancy module enters the water under wave condition, the amplitude of tension fluctuation is twice that when SPS enters water; 2) Under current condition, the displacement of SPS becomes three times larger because of the existence of the buoyancy module; 3) After being released, the velocity of the buoyancy module increases to a large speed rapidly and then reaches a balancing speed gradually. The buoyancy module floats up at a balancing speed and rushes out from the water at a pop-up distance; 4) In deep water, the floating-up velocity of the buoyancy module is related to its mass density and shape, and it is not related to water depth; 5) A drag parachute can reduce floating-up velocity and pop-up distance effectively. Good agreement was found between the simulation and experiment results.