Statistical Evaluation of Anthropometric Measures and Oral Health Status in Terms of Diet, Smoking and Brushing Habits

Introduction and Objective: The aim of this research was to find out the interaction of anthropometric measurements particularly body mass and oral health status of Turkish young adult nationals regionally, depending on the effects of diet (food and fluid consumption), smoking and tooth brushing habits, which were determined by using the body mass index (BMI) and dental health index (DMFT). Material and Methods: The BMI and DMFT of 202 cases, with an age average 22.5 years, were recorded through physical and clinical examinations. Statistical evaluation of the data was checked by Cronbach’s Alpha Reliability Scale and performed by analysis of variance, Somer’s d and Pearson Chi-Square statistics, Poisson Regression and Odds Ratio analysis. Results: The results showed that the mean of BMI was at the optimum level (21.52) for all cases. The DMFT was higher for underweight females and for overweight males. The mean of DMFT according to sexes seemingly had no significant difference;however, females had 8.6% more DMFT than males. When the risk factors of dental caries were evaluated, the DMFT was found as 19.3% more for cases consuming high carbohydrate foods, 4.5% more for high beverage consumption and 18% more for smokers. Conclusions: In conclusion, tooth brushing 3 or more times a day is necessary to decrease the DMFT and tooth brushing 3 times a day as opposed to 1 or 2 times shows significant difference regarding oral health.

Efficacy of SpyGlass^(TM)-directed biopsy compared to brush cytology in obtaining adequate tissue for diagnosis in patients with biliary strictures

AIM: To evaluate the diagnostic yield(inflammatory activity) and efficiency(size of the biopsy specimen) of SpyGlassTM-guided biopsy vs standard brush cytology in patients with and without primary sclerosing cholangitis(PSC).METHODS: At the University Medical Center Mainz, Germany, 35 consecutive patients with unclear biliarylesions(16 patients) or long-standing PSC(19 patients) were screened for the study. All patients underwent a physical examination, lab analyses, and abdominal ultrasound. Thirty-one patients with non-PSC strictures or with PSC were scheduled to undergo endoscopic retrograde cholangiography(ERC) and subsequent per-oral cholangioscopy(POC). Standard ERC was initially performed, and any lesions or strictures were localized. POC was performed later during the same session. The Boston Scientific SpyGlass SystemTM(Natick, MA, United States) was used for choledochoscopy. The biliary tree was visualized, and suspected lesions or strictures were biopsied, followed by brush cytology of the same area. The study endpoints(for both techniques) were the degree of inflammation, tissue specimen size, and the patient populations(PSC vs non-PSC). Inflammatory changes were divided into three categories: none, low activity, and high activity. The specimen quantity was rated as low, moderate, or sufficient.RESULTS: SpyGlassTM imaging and brush cytology with material retrieval were performed in 29 of 31(93.5%) patients(23 of the 29 patients were male). The median patient age was 45 years(min, 20 years; max, 76 years). Nineteen patients had known PSC, and 10 showed non-PSC strictures. No procedure-related complications were encountered. However, for both methods, tissues could only be retrieved from 29 pa-tients. In cases of inflammation of the biliary tract, the diagnostic yield of the SpyGlassTM-directed biopsies was greater than that using brush cytology. More tissue material was obtained for the biopsy method than for the brush cytology method(P = 0.021). The biopsies showed significantly more inflammatory characteristics and greater inflammatory activity compared to the cy-tological investigation(P = 0.014). The greater quantity of tissue samples proved useful for both PSC and non-PSC patients.CONCLUSION: SpyGlassTM imaging can be recom-mended for proper inflammatory diagnosis in PSC pa-tients. However, its value in diagnosing dysplasia wasnot addressed in this study and requires further investi-gation.

Morphology and tribological properties of Ni/n-SiO_2 composite coatings by pulse-reverse current brush-plating

Ni/n-SiO2 composite coating was electrodeposited by brush-plating with pulse-reverse current（RC）. The morphology, hardness, and tribological properties of the coating were investigated and compared with those of Ni and composite coatings electrodeposited with direct current（DC）. The results indicate that Ni/n-SiO2 composite coating electrodeposited by RC, because of RC and the nano powders, has denser coating, finer crystal grains, higher hardness（HV650.0, nearly 1.5 times higher than that of Ni coating electrodeposited by DC） and lower friction coefficient（nearly 0.62）, as a result, in the wearing experiment, the Ni/n-SiO2 composite coating electrodeposited by RC has the least worn loss. So this kind of coating has better wear resistance. And RC electro brush-plating can be used as a new technology of brush-plating in the area of wear resistance.

Effects of thiocyanate anions on switching and structure of poly(N-isopropylacrylamide) brushes

In this work, we investigate the effects of thiocyanate anions on the switching and the structure of poly(Nisopropylacrylamide)(PNIPAM) brushes using a molecular theory. Our model takes into consideration the PNIPAM–anion bonds, the electrostatic effects and their explicit coupling to the PNIPAM conformations. It is found that at low thiocyanate anion concentration, as the anion concentration of thiocyanate increases, thiocyanate anions are more associated with PNIPAM chains through the PNIPAM–anion bonds, which contributes to stronger electrostatic repulsion and leads to an increase of lower critical solution temperature(LCST). By analyzing the average volume fractions of PNIPAM brushes,it is found that the PNIPAM brush presents a plateau structure. Our results show that the thiocyanate anions promote phase segregation due to the PNIPAM–anion bonds and the electrostatic effect. According to our model, the reduction of LCST can be explained as follows: at high thiocyanate anion concentration, with the increase of thiocyanate concentration, more ion bindings occurring between thiocyanate anions and PNIPAM chains will result in the increase of the hydrophobicity of PNIPAM chains;when the increase of electrostatic repulsion is insufficient to overcome the hydrophobic interaction of PNIPAM chains, it will lead to the reduction of brush height and LCST at high thiocyanate anion concentration. Our theoretical results are consistent with the experimental observations, and provide a fundamental understanding of the effects of thiocyanate on the LCST of PNIPAM brushes.

The value of cytologic brushing with the aid of fiberoptic colonoscopy in the diagnosis of carcinoma of colon

Preoperative cytologic brushing and biopsy under direct Vision withfiberoptic colonoscopy(FC)and postoperative histopathologic examination wereperformed in 147 patients who were suspected of suffering from carcinoma of co-lon.In FC cytologic brushing,128 cases were positive for malignancy(87.1percent),18 false-negative(12.2 percent)and only one false-positive(0.7 percent).In the 146 FC biopsy specimens,124 were positive for malignancy(84 4 percent)and 22 false-negative and no false-positive.Combination of FC cytologic brushingwith FC biopsy could raise the diagnostic rate of colonic carcinoma to 95.2% anddecrease false-negative and false-positive because the two methods may replenisheach other in sampling and observation.Cytologic brushing is most valuable tothe early diagnosis of colonic carcinoma.When colonic stricture and obstructionprevent the colonoscope from reaching the lesion and FC biopsy cannot bedone,FC cytologic brushing is an effective method for diagnosis.The positiverate and false-negative rate of the cytologic brushing did not correlate to grosstyping,histopathologic typing and Dukes staging(P】0.05).The factorsinfluencing the correct diagnosis of colonic carcinoma by FC cytologic brushingare discussed in this paper.

Detection of K-ras gene mutation at codon 12 by pancreatic duct brushing for pancreatic cancer

OBJECTIVE: To assess the diagnostic value of endoscopic pancreatic duct brushing in detecting mutation of the K-ras gene at codon 12 in cytologic specimens from patients with pancreatic cancer. METHODS: Thirty-five patients treated at Changhai Hospital, Shanghai between 1999 and 2001 were enrolled. Their cells obtained by pancreatic duct brushing during endoscopic retrograde tholangiopancreatography (ERCP) were suspended with phosphate buffer solution (PBS). DNA of the cells was extracted and mutation of the K-ras gene at codon 12 detected by means of PCR-SSCP. RESULTS: The K-ras gene mutation rate of pancreatic cancer was 70%, which was higher than that of chronic pancreatitis (14%, P<0.05). K-ras gene mutation was not found in patients with pancreatic cystorcarcinoma and duodenum carcinoma. As to the location of pancreatic cancer, no significant difference was observed between the head, the body and tail. The sensitivity, specificity, accuracy of pancreatic duct brushing in detecting pancreatic cancer was 70%, 94%, and 83%, respectively. CONCLUSION: K-ras analysis of pancreatic brushing samples is helpful in the diagnosis of patients with early pancreatic cancer.

The Mathematical Simulation of Brush Drums in a Dual Saw Cylinder Chamber Gin for the Purpose of Increasing the Quantity of Captured Cotton Fiber from Saw

An analysis of the efficiency of the ginning of cotton fibers with two saw cylinders has been carried out. In comparison to a one-cylinder machine, the 2 cylinder approach can help to preserve the natural characteristics of cotton fiber and seeds. This technology allows economizing electricity and decreasing damage to fiber and also increases the productivity of the machine.

Synthesis of Hierarchical SnO2 Nanowire–TiO2 Nanorod Brushes Anchored to Commercially Available FTO-coated Glass Substrates

Growth of single-crystal Sn O_2 nanowires using a fluorine-doped Sn O_2(FTO) thin film as both the source and substrate is demonstrated for the first time at relatively low temperature(580 °C) which preserves the integrity of the underlying glass support and improves scalability to devices. Furthermore, a microwave hydrothermal process is shown to grow Ti O_2 nanorods on these nanowires to create a hierarchical nanoheterostructure that will lead to efficient photogenerated charge carrier separation and rapid transport of electrons to the substrate. This process simplifies nanowire growth by using commercially available and widely used FTO substrates without the need for an additional upstream Sn source and can be used as a high surface area host structure to many other hierarchical structures.

Synthesis of PMMA-co-PMAA Copolymer Brush on Multi-Wall Carbon Nanotubes

Poly(methyl methacrylate)/poly(methacrylamide) copolymer (PMMA-co-PMAA) was synthesized by a free radical copolymerization of MMA and MAA monomers in methylethyl ketone using AIBN as radical initiator. Multi-wall carbon nanotubes (MWCNT) were oxidized in KMnO4 acidic suspension. Carboxyl groups on the surface oxidized MWCNT were reacted with primary amide group of PMMA-co-PMAA copolymer in MEK solution under ultrasound to form polymer brush on the surface of MWCNT. With the help of TG analyses the amount of covalently grafted PMMA-co-PMAA copolymer onto MWCNT surface was determined as ?47 wt%. TEM analyses identified thin co-polymer layer adhered onto MWCNT surface with average thickness ?5 nm.

Sand-wear resistance of brush electroplated nanocomposite coating in oil and its application to remanufacturing

Sand-wear resistance of nano scale alumina particle reinforced nickel matrix composite coating （n-Al2O3/Ni） prepared by brush electroplating technique was investigated via wear tests in sand-contaminated oil lubricant, comparing with that of AISI1045 steel and brush electroplated Ni coating. Effects of testing load, sand content and sand size on worn volume of the three materials, and also coating surface roughness on worn volume of the brush electroplated coatings were accessed. Results show that the worn volume of all the three materials increases with increasing of testing load, sand content and sand size. In the same conditions, n-Al2O3/Ni composite coating has the smallest worn volume while AISI1045 steel has the largest because of the n-Al2O3 particle effects. As to n-Al2O3/Ni and Ni coatings, the surface-polished coatings have obviously lower worn volume than the as-plated coatings. The brush electroplated n-Al2O3/Ni composite coating was employed to remanufacture the sand-worn bearing seats of a heavy vehicle and good results were gained.

Automatic brush-plating technology for component remanufacturing

An automatic brush-plating system was developed for component remanufacturing. With this system, Ni/nano-alumina composite coatings from an electrolyte containing 20g/L nano-alumina particles were prepared. Microstructure, surface morphology, microhardness and wear resistance of automatically plated coatings and manually plated coatings were investigated comparatively. The results show that the automatically plated coatings are relatively dense and uniform and have lower friction coefficient of 0.089 under lubricant condition, when compared with manually plated coatings with friction coefficient of 0.14.

The Overall Design and Technical Measures of Brush Testing Swivei Table

ＴｈｅＯｖｅｒａｌｌＤｅｓｉｇｎａｎｄＴｅｃｈｎｉｃａｌＭｅａｓｕｒｅｓｏｆＢｒｕｓｈＴｅｓｔｉｎｇＳｗｉｖｅｉＴａｂｌｅＬＩＹｏｎｇ；ＸＵＧｕｏｄｏｎｇ；ＦＵＪｉｙｉｎｇ；ＣＵＩＳｈｕｍｅｉ（李勇）（徐国东）（傅继盈）（崔淑梅）（Ｄｅｐｔ．ｏｆＥｌ...

Exploring the Insecticidal Potentiality of <i>Amorphophallus paeonifolius</i>Tuber Agglutinin in Hemipteran Pest Management

Hemipteran group of sap sucking insect pests cause worldwide crop destruction. The role of mannose specific monocot lectins have recently been worked out in hemipteran pest management. The present article demonstrates the insecticidal efficacy of a new mannose specific agglutinin, isolated from tubers of Amorphophallus paeonifolius (AMTL) against a wide range of hemipteran insects. The 25 kDa dimeric protein was found to inhibit the survivability of hemipteran insects namely, Lipaphis erysimi, Aphis gossypii and Dysdercus cingulatus quite efficiently, as analysed by synthetic diet based bioassay experiments. Surface Plasmon Resonance study detected binding of insecticidal AMTL to insect gut brush border membrane vesicle (BBMV) protein, an absolute prerequisite for conferring toxicity against target insects. Further ligand blot analysis spotted a ~74 kDa glycoprotein as putative receptor of AMTL from the total BBMV protein fraction of Lipaphis erysimi. Phylogenetic analysis showed a significant relatedness of AMTL to the previously established monocot lectin Galanthus nivalis agglutinin (GNA) in terms of their conserved mannose binding domains, agglutinating ability of rabbit erythrocytes and insecticidal efficacies. These information project AMTL as a promising candidate in preventing crop loss caused due to hemipteran insect attack.

Wear property of high-resistivity carbon brushes made with and without MoS_2 in variable humidity

Four kinds of high-resistivity carbon brushes with MoS2 contents of 0%,2%,4%and 6%(mass fraction)were prepared, respectively.Wear tests of brushes were conducted on an alternate current(AC)motor.Scanning electron microscopy(SEM)and energy dispersive X-ray analysis(EDS)were used to analyze the worn surface of brushes,and a thermocouple was used to measure the bulk temperature of the brush.The results show that wear rate of brush made without MoS2 in 10%relative humidity(RH)is two times larger than that in 50%RH,whereas the wear rates change little for the brushes made with MoS2.The wear of brushes has much to do with the surface film.In low humidity,the surface film can not be formed for the former brush while a sulfur layer can be formed for the latter brushes,which can reduce sparks,frictional heat and wear rate,and play a role like the water film in high humidity.

PIEZOELECTRIC PROPERTIES OF SINGLE-STRAND DNA MOLECULAR BRUSH BIOLAYERS

The paper is devoted to investigations on nanomechanical behaviors of biochips in label-free biodetections. The chip consists of Si-layer, Ti-layer, Au-layer and single-strand DNA （ssDNA） molecular brush biolayer immobilized by self-assembly technology of thiol group. Unlike previous viewpoints, such as force-bending, entropy-bending and curvature electricity effect, etc., the piezoelectric effect of the biopolymer brush layer is viewed as the main factor that induces nanomechanical bending of biochips, and a classical macroscopic piezoelectric constitutive relation is used to describe the piezoelectric effect. A new laminated cantilever beam model with a piezoelectric biolayer in continuum mechanics, the linearized Poisson-Boltzmann equation in statistical mechanics and the scaling method in polyelectrolyte brush theory are combined to es- tablish a relationship between the nanomechanical deflection of DNA chips and the factors such as nanoscopic structural features of ssDNA molecules, buffer salt concentration, macroscopic mechanical/piezoelectric parameters of DNA chips etc. Curve fitting of experimental data shows that the sign of the piezoelectric constant of the biolayer may control the deflection direction of DNA chips during the packaging process.

Properties of electric brushes made with Cu-coated graphite composites and with copper powders

Cu-coated graphite composites were prepared by an electroless plating method,and the composites were examined by scanning electron microscopy(SEM). The copper content of the composites was measured to reach 73%(mass fraction). Brush samples made with composites contents of 10%,15% and 20% and with copper powders content of 11% were obtained. The results show that the resistivity of the brush samples decreases and hardness becomes higher with increasing composites content. Copper is dispersively distributed in the brush samples made with the composites,whereas copper agglomerates in Cu-graphite mechanical mixture. For the same Cu content,Cu-coated graphite composites possess lower resistivity and higher hardness than Cu-graphite mechanical mixture. A new type of electric brush was obtained by using Cu-coated graphite composites,the wear and durability tests carried out on a HGH5435M120 AC motor indicate that its service life reaches 250 h. The electric brushes possess relatively low resistivity(275 μΩ·m) and good wear resistance,so they are very suitable for high-speed micromotors.

Low temperature bonding of LD31 aluminum alloys by electric brush plating Ni and Cu coatings

Soldering of LD31 aluminum alloys using Sn-Pb solder paste after electric brush plating Ni and Cu coatings was investigated. The technology of electric brush plating Ni and Cu was studied and plating solution was developed. The microstructure of the coatings, soldered joint and fracture face were analyzed using optic microscopy, SEM and EDX. The shear strength of soldered joint could reach as high as 26.83MPa. The results showed that reliable soldered joint could be obtained at 230℃, the adhesion of coatings and LD31 aluminum alloy substrate was high enough to bear the thermal process in the soldering.

Formation of surface-attached microstructured polyelectrolyte brushes

Surface-attached micropattemed polyelectrolyte brushes on planar solid surfaces are generated using free radical polymerization photo-initiated by self-assembled initiator monolayers. It is shown that the formed patterns can be either negative or positive with different patterning processes.

Study on Microstructures and Properties of Electro Brush-plating Composite Coatings

In this paper, composite coatings were prepared using improved electro brush-plating, and the possibility and feasibility of obtaining of composite coatings with various hard dispersion paticles (C^Os. SiC, ZrO, A^Ojetc.) were studied.The microstructure, constitution, microhardness and wear resistance were examined. The results show that.electro brush-plating composite coatings have finner microstructures and higher microhardness and wear-resistance than ordinary electro brush-plating coatings.The research results can be used in repairing and surface strengthening of worn machine parts,and have practical uses.

半成品工序降低棉结的措施

为了保证半成品质量指标稳定,以纺CJ 9.72 tex纱为例,从原棉指标、清花工序、梳棉工序、精梳准备工序、精梳工序、并粗工序以及各工序温湿度控制等方面,分析对棉结的影响及原因,并提出针对性的控制措施。指出:控制棉结数量是纺纱厂提高产品质量的重要工作;实际生产须以客户要求为标准,控制好原棉指标,合理设置各工序工艺参数以及温湿度,加强操作管理,及时对设备进行维护保养,保证纺纱通道清洁、器材专件状态良好,从各工序做好棉结数量控制,以提升成纱质量、织造效率和织物质量。