Criterion of local energy release rate of gob instability in deep mines considering unloading stress path

The stress path characteristics of surrounding rock in the formation of gob were analyzed and the unloading was solved. Taking Chengchao Iron Mine as the engineering background, the model for analyzing the instability of deep gob was established based on the mechanism of stress relief in deep mining.The energy evolution law was analyzed by introducing the local energy release rate index(LERR), and the energy criterion of the instability of surrounding rock was established based on the cusp catastrophe theory. The results show that the evolution equation of the local energy release of the surrounding rock is a quartic function with one unknown and the release rate increases gradually during the mining process.The calculation results show that the gob is stable. The LERR per unit volume of the bottom structure is relatively smaller which means that the stability is better. The LERR distribution showed that there was main energy release in the horizontal direction and energy concentration in the vertical direction which meets the characteristics of deep mining. In summary, this model could effectively calculate the stability of surrounding rock in the formation of gob. The LERR could reflect the dynamic process of energy release,transfer and dissipation and that provided an important reference for the study of the stability of deep mined out area.

ANALYSIS OF ENERGY RELEASE RATE FOR CRACKED LAMINATES

An interface crack analysis is presented for further understanding the characteristics of the crack-tip field. The conditions under which the energy release rate components would exist are emphasized and the relations between energy release rate components and the stress intensity factors are given. Combining with the results of chasical plate theory analysis. a closed-form solution for stress intensity factors in terms of external loading as well as some geometric and material parameters for fairly general composite laminates is derived Then. an analytical solution for energy release rate components is deduced. In order to get energy release rate components under general loading condition. a mode mix parameter, Ω, must be determined separately. A methodology for determining Ω is discussed. Finally. several different kinds of laminates are examined and the results obtained could be used in engineering applications.

Analysis of energy release rate for composite delaminated cylindrical shells subjected to axial compression

In this paper, the postbuckling governing equations and the analytical expression of the energy release rates associated with delamination growth in a compression-loaded cylindrical shell are derived by using the variational principle of moving boundary and the Griffith fracture criterion. The finite difference method is used to generate the postbuckling solutions of the delaminated cylindrical shells, and with these solutions, the values of the energy release rates are determined. In simulational examples, the effects of a wide range of parameters, such as delamination sizes and depths, boundary conditions, geometrical parameters, material properties and laminate stacking sequences on the energy release rates of axisymmetrical laminated cylindrical shells are intensively discussed.

RESEARCH FOR THE STRAIN ENERGY RELEASE RATE OF COMPLEX CRACKS BY USING POINT-BY-POINT CLOSED EXTRAPOLATION APPROACH

A new extrapolation approach was proposed to calculate the strain energy release rates of complex cracks. The point_by_point closed method was used to calculate the closed energy, thus the disadvantage of self_inconsistency in some published papers can be avoided. The disadvantage is that the closed energy is repeatedly calculated: when closed nodal number along radial direction is more than two, the displacement of nodes behind the crack tip that is multiplied by nodal forces, the closed energy has been calculated and the crack surfaces have been closed, and that closed energy of middle point is calculated repeatedly. A DCB (double cantilever beam) specimen was calculated and compared with other theoretical results, it is shown that a better coincidence is obtained. In addition the same results are also obtained for compact tension specimen, three point bend specimen and single edge cracked specimen. In comparison with theoretical results,the error can be limited within 1 per cent. This method can be extended to analyze the fracture of composite laminates with various delamination cracks.

ON CRACK-TIP STRAIA ENERGY RELEASE RATE IN NON-PRINCIPAL DIRECTIONS OF ELASTICITY FOR SIMPLE LAYER PLATE OF COMPOSITE MATERIALS

In this paper, the fracture problem in non-principal directions of elasticity for a simple layer plate of linear-elastic orthotropic composite materials is studied. The formulae of transformation between characteristic roots, coefficients of elastic compliances in non-principal directions of elasticity and corresponding parameters in principal directions of elasticity are derived. Then, the computing formulae of strain energy release rate under skew-symmetric loading in terms of engineering parameters for principal directions of elasticity are obtained by substituting crack-tip stresses and displacements into the basic formula of the strain energy release rate.

Energy Release Rates for Interface Cracks in Multilayered Structures

This paper examines the evolution of the interfacial deflection energy release rates in multilayered structures under four-point bending.The J-integral and the extended finite element method(XFEM)are adopted to investigate the evolution of the interfacial deflection energy release rates of composite structures.Numerical results not only verify the accuracy of analytical solutions for the steady-state interfacial deflection energy release rate,but also provide the evolutionary history of the interfacial deflection energy release rate under different crack lengths.In addition,non-dimensional parametric analyses are performed to discuss the effects of normalized ratios of the crack length,the elastic modulus,and the thickness on the interfacial deflection energy release rate.The results demonstrate that the elastic modulus ratio and thickness ratio have a distinct influence on the interfacial deflection energy release rate for multilayered beams.Furthermore,an unstable interfacial crack tends to occur for elastic multilayer beams with higher elastic modulus on the upper sub-beam under bending moments.The unstable interfacial fracture shows a decreasing interfacial deflection energy release rate with an increasing interfacial crack length.

A Kinetic Study of Anaerobic Biodegradation of Food and Fruit Residues during Biogas Generation Using Initial Rate Method

A kinetic study of biogas production from Urban Solid Waste (USW) generated in Dar es Salaam city (Tanzania) is presented. An experimental bioreactor simulating mesophilic conditions of most USW landfills was developed. The goal of the study was to generate the kinetic order of reaction with respect to biodegradable organic waste and use it to model biogas production from food residues mixed with fruit waste. Anaerobic biodegradation was employed under temperature range of 28℃ - 38℃. The main controls were leachate recirculation and pH adjustments to minimize acid inhibitory effects and accelerate waste biodegradation. The experimental setup comprised of three sets of bioreactors. A biodegradation rate law in differential form was proposed and the numerical values of kinetic order and rate constant were determined using initial rate method as 0.994 and 0.3093 mol0.006·day-1, respectively. Results obtained were consistent with that found in literature and model predictions were in reasonable agreement with experimental data.

Oxidation Kinetics of Aluminum Powders in a Gas Fluidized Bed Reactor in the Potential Application of Surge Arresting Materials

In this technical paper, the oxidation mechanism and kinetics of aluminum powders are discussed in great details. The potential applications of spherical aluminum powders after oxidation to be part of the surging arresting materials are discussed. Theoretical calculations of oxidation of spherical aluminum powders in a typical gas fluidization bed are demonstrated. Computer software written by the author is used to carry out the basic calculations of important parameters of a gas fluidization bed at different temperatures. A mathematical model of the dynamic system in a gas fluidization bed is developed and the analytical solution is obtained. The mathematical model can be used to estimate aluminum oxide thickness at a defined temperature. The mathematical model created in this study is evaluated and confirmed consistently with the experimental results on a gas fluidization bed. Detail technical discussion of the oxidation mechanism of aluminum is carried out. The mathematical deviations of the mathematical modeling have demonstrated in great details. This mathematical model developed in this study and validated with experimental results can bring a great value for the quantitative analysis of a gas fluidization bed in general from a theoretical point of view. It can be applied for the oxidation not only for aluminum spherical powders, but also for other spherical metal powders. The mathematical model developed can further enhance the applications of gas fluidization technology. In addition to the development of mathematical modeling of a gas fluidization bed reactor, the formation of oxide film through diffusion on both planar and spherical aluminum surfaces is analyzed through a thorough mathematical deviation using diffusion theory and Laplace transformation. The dominant defects and their impact to oxidation of aluminum are also discussed in detail. The well-controlled oxidation film on spherical metal powders such as aluminum and other metal spherical powders can potentially become an important part of switch devices of surge arresting materials, in general.

C haracteristics of turbulent kinetic energy dissipation rate and turbidity near the coast of East China Sea

The East China Sea(ECS) has a high suspended-sediment concentration because of the influence of the Changjiang River,indicated by high turbidity in the water.Considering the islands off the coast and the complex topography,and the strong influence of tides and wind,the coast off the ECS is a typical region with strong oceanic mixing processes.The changes in the dynamic processes near the bottom play an important role in the control of water turbidity.The turbulent kinetic energy dissipation rate(ε) is a parameter that shows the strength of ocean mixing.This is estimated based on a structure method using current velocity that is measured by a high-frequency Acoustic Doppler Current Profiler(ADCP) from a seafloor observatory in the ECS.The results indicate strong ocean mixing processes with a mean e value of 5.7×10^(-5) W/kg and distinct tidal variations in the dissipation rate.Conversely,the variation of the water turbidity leads to changes in the water dynamical structure near the bottom.Comparing the dissipation rate with the turbidity near the bottom boundary layer,we find that the high turbidity mimics strong ocean mixing.

The effect of Ti and Zr content on the structure,mechanics and energy-release characteristics of Ti—Zr—Ta alloys

Energetic structural materials(ESMs)are a new type of structural materials with bearing and damage characteristics.In this work the microstructure,mechanical properties and energy release characteristics of multi-element Ti-Zr-Ta alloys with good casting performance were studied.The microstructure of the Ti_(x)ZrTa alloys gradually change from BCC+HCP to single BCC structure with the increase of Ti.While the Ti_(2)Zr_(y)Ta alloys was still uniform and single BCC structure with the increase of Zr.The evolution of microstructure and composition then greatly affect the mechanical properties and energy-release characteristics of Ti-Zr-Ta alloys.The synergistic effect of dual phase structure increases the fracture strain of Ti_(x)ZrTa(x=0.2,0.5)with the Ti content decreases,while the fracture strain of Ti_(x)ZrTa(x=2.0,3.0,4.0)gradually increase with the Ti content increases caused by the annihilation of the obstacles for dislocation movement.And as Zr content increases,the fracture strain of Ti_(2)Zr_(y)Ta alloys decrease,then the oxidation reaction rate and fragmentation degree gradually increase.The higher oxidation rate and the lager exposed oxidation area jointly leads the higher releasing energy efficiency of Ti_(x)ZrTa alloys with low Ti content and Ti_(2)Zr_(y)Ta alloys with high Zr content.

Assessing the energy release characteristics during the middle detonation reaction stage of aluminized explosives

Afterburning behind the detonation front of an aluminized explosive releases energy on the millisecond timescale,which prolong the release of detonation energy and the energy release at different stages also shows significant differences.However,at present,there are few effective methods for evaluating the energy release characteristics of the middle reaction stage of such explosives,which can have a duration of tens to hundreds of microseconds.The present work demonstrates an approach to assessing the midstage of an aluminized explosive detonation based on a water push test employing a high degree of confinement.In this method,the explosive is contained in a steel cylinder having one end closed that is installed at the bottom of a transparent water tank.Upon detonation,the gaseous products expand in one direction while forcing water ahead of them.The resulting underwater shock wave and the interface between the gas phase products and the water are tracked using an ultra-high-speed framing and streak camera.The shock wave velocity in water and the expansion work performed by the gaseous detonation products were calculated to assess the energy release characteristics of aluminized explosives such as CL-20 and RDX in the middle stage of the detonation reaction.During the middle stage of the detonation process of these aluminized explosives,the aluminum reaction reduced the attenuation of shock waves and increased the work performed by gas phase products.A higher aluminum content increased the energy output while the presence of oxidants slowed the energy release rate.This work demonstrates an effective means of evaluating the performance of aluminized explosives.

The energy release rate for hygrothermal coupling elastic materials

In the fracture problems of hydrophilic elastic materials under coupling effects of heat conduction, moisture diffusion and mechanical deformation, the conventional J-integral is no longer path independent. The value of J is unequal to the energy release rate in hygrothermal coupling cases. In the present paper, we derived a general form of the energy release rate for hygrothermal fracture problems of the hydrophilic elastic materials on the basis of energy balance equation in cracked areas. By introducing the constitutive relations and the essential equations of irreversible thermodynamics, a specific expression of the energy release rate was obtained, and the expression can be reformmulated as path independent integrals, which is equivalent to the energy release rate of the fracture body. The path independence of the integrals is then verified numerically.

Energy Absorption of Pultruded Glass-Graphite/Epoxy Hybrid Composites under High Strain-Rate Induced Transverse Tension

This paper focuses on the dynamic tensile response of glass-graphite/epoxy composites illustrating improvement in energy absorption through hybridization. The dynamic response and energy absorption characteristics of pultruded hybrid combinations of glass and graphite fibers in an epoxy matrix subjected to induced transverse tension at high strain-rate in a modified Split Hopkinson Pressure Bar (SHPB) apparatus, are presented. Transverse tensile strength was determined by diametral compression of disc samples (Brazilian indirect tensile test method). Diametral crack initiation and strain to failure were monitored with a Shimadzu HPV-2 high-speed video camera at a recording speed of 500,000 fps and Digital Image Correlation (DIC). Adequate measures were taken to ensure that initiation of specimen failure occurred at the exact center of the disc specimen, and propagated through the diameter along the compressive loading axis, for the induced transverse tension tests to be valid. A study of the strength and specific energy absorption demonstrates the benefits of hybridization. Under induced transverse tensile loading condition, the pure glass/epoxy (GL60) exhibited higher strength than pure graphite/epoxy (GR60). Pure graphite/epoxy (GR60) has higher specific energy absorption capacity than pure glass/epoxy (GL60) in transverse tension. Among all hybrids, GR30 has the highest specific energy absorption under transverse tension. Overall, hybrid GL48, with 48% low-cost glass fibers in the inner core and 12% high-cost graphite fibers in outer shell, was found to exhibit better performance under induced transverse tension at high strain-rates, showing the benefits of hybridization.

Incremental Diversity: A Framework for Rate-Adaptation/Energy-Conservation Enhancement in MIMO Systems

In recent years, MIMO technology has emerged as one of the technical breakthroughs in the field of wireless communications. Two famous MIMO techniques have become investigated thoroughly throughout the literature;Spatial Multiplexing, and Space Time Block Coding. On one hand, Spatial Multiplexing offers high data rates. On the other hand, Space Time Block Coding presents transmission fidelity. This imposes a fundamental tradeoff between capacity and reliability. Adaptive MIMO Switching schemes have been proposed to select the MIMO scheme that best fits the channel conditions. However, the switching schemes presented in the literature directly switch between the MIMO endpoints. In this paper, an adaptive MIMO system that incrementally switches from multiplexing towards diversity is proposed. The proposed scheme is referred to as incremental diversity and can be set to operate in two different modes;Rate-Adaptive, and Energy-Conservative Incremental Diversity. Results indicate that the proposed incremental diversity framework achieves transmission reliability offered by MIMO diversity, while maintaining a gradual increase in spectral efficiency (in the Rate-Adaptive mode) or a reduction in required number of received symbols (in the Energy-Conservative mode) with increase in the SNR.

Monitoring the in vivo siRNA release from lipid nanoparticles based on the fluorescence resonance energy transfer principle

The siRNA-loaded lipid nanoparticles have attracted much attention due to its significant gene silencing effect and successful marketization.However,the in vivo distribution and release of siRNA still cannot be effectively monitored.In this study,based on the fluorescence resonance energy transfer(FRET)principle,a fluorescence dye Cy5-modified survivin siRNA was conjugated to nanogolds(Au-DR-siRNA),which were then wrapped with lipid nanoparticles(LNPs)for monitoring the release behaviour of siRNA in vivo.The results showed that once Au-DR-siRNA was released from the LNPs and cleaved by the Dicer enzyme to produce free siRNA in cells,the fluorescence of Cy5 would change from quenched state to activated state,showing the location and time of siRNA release.Besides,the LNPs showed a significant antitumor effect by silencing the survivin gene and a CT imaging function superior to iohexol by nanogolds.Therefore,this work provided not only an effective method for monitoring the pharmacokinetic behaviour of LNP-based siRNA,but also a siRNA delivery system for treating and diagnosing tumors.

Effects of polyamines on the early development of cystocarps,spore release,survival,and germination rate of Gracilariopsis lemaneiformis

Three polyamines(PAs)(spermidine(Spd),spermine(Spm),and putrescine(Put))were used as growth regulators to the marine macroalgae Gracilariopsis lemaneiformis and to female gametophyte and reproductive tissues(cystocarps were constructed),which led to early maturation of cystocarps and spore release.Laboratory cultivation revealed that exogenous PA application accelerated the development of cystocarps,and the mean sporeling growth rate was 20%–50%/d during the initial week of cultivation.The spore count(SC),survival rate(SR),and germination rate(GR)of G.lemaneiformis showed different responses to PA(10-6 mol/L and 10-3 mol/L)treatments under different temperatures(18,26,and 34℃),light intensities(30,60,and 90μmol photons/(m^(2)·s)),salinities(25,30,and 35),and nutrient levels(25꞉2.5,50꞉5.0,and 75꞉7.5μmol/L NH4Cl꞉K2HPO4),and the optimal conditions were 26℃,light intensity of 60μmol/(m^(2)·s),salinity of 35,and nutrient level of 50꞉5.0μmol/L NH4Cl꞉K2HPO4.Under the optimum conditions,the SC per cystocarp increased by 82.38%,and the spore SR and GR increased by 33.07%and 46.44%,respectively.Each experiment lasted for 7 days,with the highest SC on Day 4 and plateauing on Day 7.The results indicate that PAs could promote the early maturation,spore release,survival,and germination of G.lemaneiformis under laboratory conditions.

Numerical modelling of strength and energy release characteristics of pillar-scale coal mass

Coal burst is a manifestation of rapid energy release,which is considered as one of the most critical operational hazards in underground coal mines.This study numerically investigates the effects of discontinuities on the strength and energy release characteristics of coal mass samples under uniaxial compression.The universal distinct element code(UDEC)was used to model pillar-scale coal mass samples that were represented by an assembly of triangular deformable blocks,and pre-existing discontinuities such as bedding planes and cleats were also included in the models.It shows that cleat spacing can have a significant impact on compressive strength and energy release,with both strength and energy release(magnitude and rate)reducing as the number of cleats was increased.This work is one of the first attempts to numerically model and quantify the energy release which occurs during the failure of pillar-scale coal mass samples with varying cleat densities.The insights from the numerical modelling can help to understand the possible energy release mechanisms and associated coal burst potential in changing coal cleat conditions.

Energy status regulated umami compound metabolism in harvested shiitake mushrooms(Lentinus edodes)with spores triggered to release

The molecular mechanisms of energy status related to the umami taste of postharvest shiitake mushrooms during spore release remain poorly understood.In this study,the variations of energy status and umami taste of mushrooms were measured at 25℃.At 24 h storage,slight spore prints of mushrooms were first pictured,respiration peaked.Significant ATP decrease and ADP increase were also observed as the initiation of postharvest senescence(P<0.05).Meanwhile,the activities of phosphohexose isomerase,succinate dehydrogenase,glucose-6-phosphate dehydrogenase and cytochrome c oxidase and the contents of umami nucleotides and amino acids were maintained at higher levels in mushrooms with spore release.Notably,the equivalent umami concentration(EUC)was strongly correlated with energy levels(R=0.80).Fifteen related gene expression levels in the energy metabolism pathway were downregulated.LecpdP1 and LeAK were significantly expressed in the conversion of ATP into AMP and played key roles in connecting the energy state and umami level.These results provided valuable insights on the umami taste associated with energy metabolism mechanism during postharvest mushroom spore release.

Assessment of rockburst hazard by quantifying the consequence with plastic strain work and released energy in numerical models

Quantifying the rockburst consequence is of critical importance to reduce the hazards with preventative measures in underground mines and deep tunnels. Contours of energy components within a pillar model are plotted at different rockmass damage stages, and plastic strain work and released energy are proposed as indicators of rockmass damage consequence. One pillar model under different loading stiffness is simulated to assess indicators of pillar burst and the resulting damages. The results show the rockmass damage under soft loading stiffness has larger magnitude of plastic strain work and released energy than that which is under stiff loading stiffness, indicating the rockburst consequence can be quantified with plastic strain work and released energy in numerical models. With the quantified rockburst consequence,preventative measures can be taken to avoid severe hazards to mine safety.

Experimental Measurements of Neutron Yields and Neutron Emission Rates in Intermediate Energy Heavy， Ion Reactions

ＥｘｐｅｒｉｍｅｎｔａｌＭｅａｓｕｒｅｍｅｎｔｓｏｆＮｅｕｔｒｏｎＹｉｅｌｄｓａｎｄＮｅｕｔｒｏｎＥｍｉｓｓｉｏｎＲａｔｅｓｉｎＩｎｔｅｒｍｅｄｉａｔｅＥｎｅｒｇｙＨｅａｖｙ，ＩｏｎＲｅａｃｔｉｏｎｓ￥ＬｉＧｕｉｓｈｅｎｇ；ＺｈａｎｇＴｉａｎｍｅｉ；...