Starting from a philosophical perspective,which states that the living structures are actually a combination between matter and information,this article presents the results on an analysis of the bipolar information-m...Starting from a philosophical perspective,which states that the living structures are actually a combination between matter and information,this article presents the results on an analysis of the bipolar information-matter structure of the human organism,distinguishing three fundamental circuits for its survival,which demonstrates and supports this statement,as a base for further development of the informational model of consciousness to a general informational model of the human organism.For this,it was examined the Informational System of the Human Body and its components from the perspective of the physics/information/neurosciences concepts,showing specific functions of each of them,highlighting the correspondence of these centers with brain support areas and with their projections in consciousness,which are:Center of Acquisition and Storing of Information(CASI)reflected in consciousness as memory,Center of Decision and Command(CDC)(decision),Info-Emotional Center(IES)(emotions),Maintenance Informational System(MIS)(personal status),Genetic Transmission System(GTS)(associativity/genetic transmission)and Info Genetic Generator(IGG)related by the body development and inherited behaviors.The Info Connection(IC),detected in consciousness as trust and confidence can explain the Near-Death Experiences(NDEs)and associated phenomena.This connection is antientropic and informational,because from the multitude of uncertain possibilities is selected a certain one,helping/supporting the survival and life.The human body appears therefore as a bipolar structure,connected to two poles:information and matter.It is argued that the survival,which is the main objective of the organism,is complied in three main ways,by means of:(i)the reactive operation for adaptation by attitude;(ii)the info-genetic integration of information by epigenetic processes and genetic transmission of information for species survival,both circuits(i)and(ii)being associated to the information pole;(iii)maintenance of the material body(defined as informed matter)and its functions,associated to the matter pole of the organism.It results therefore that the informational system of the human body is supported by seven informational circuits formed by the neuro-connections between the specific zones of the brain corresponding to the informational subsystems,the cognitive centers,the sensors,transducers and execution(motor/mobile)elements.The fundamental informational circuits assuring the survival are the reactive circuit,expressible by attitude,the epigenetic/genetic circuit,absorbing and codifying information to be transmitted to the next generations,and the metabolic circuit,connected to matter(matter pole).The presented analysis allows to extend the informational modeling of consciousness to an Informational Model of Consciousness and Organism,fully describing the composition/functions of the organism in terms of information/matter and neurosciences concepts.展开更多
This paper presents a novel approach to design robust Source Coupled Logic (SCL) for implementing ultra low power circuits. In this paper, we propose two different source coupled logic structures and analyze the perfo...This paper presents a novel approach to design robust Source Coupled Logic (SCL) for implementing ultra low power circuits. In this paper, we propose two different source coupled logic structures and analyze the performance of these structures with STSCL (Sub-threshold SCL). The first design under consideration is DTPMOS as load device which analyses the performance of Dynamic Threshold SCL (DTSCL) Logic with previous source coupled logic for ultra low power operation. DTSCL circuits exhibit a better power-delay Performance compared with the STSCL Logic. It can be seen that the proposed circuit provides 56% reduction in power delay product. The second design under consideration uses basic current mirror active load device to provide required voltage swing. Current mirror source coupled logic (CMSCL) can be used for high speed operation. The advantage of this design is that it provides 54% reduction in power delay product over conventional STSCL. The main drawback of this design is that it provides a higher power dissipation compared to other source coupled logic structures. The proposed circuit provides lower sensitivity to temperature and power supply variation, with a superior control over power dissipation. Measurements of test structures simulated in 0.18 μm CMOS technology shows that the proposed DTSCL logic concept can be utilized successfully for bias currents as low as 1 pA. Measurements show that existing standard cell libraries offer a good solution for ultra low power SCL circuits. Cadence Virtuoso schematic editor and Spectre Simulation tools have been used.展开更多
Objective:Observation on the effect of Ilizarov external fixation combined with vacuum pressure sealing drainage and antibiotics in the treatment of infective tibial nonunion.Methods:79 patients with tibial infective ...Objective:Observation on the effect of Ilizarov external fixation combined with vacuum pressure sealing drainage and antibiotics in the treatment of infective tibial nonunion.Methods:79 patients with tibial infective nonunion who were treated in our hospital from August 2016 to August 2018 were divided into two groups according to random number table,with 39 patients in the control group treated with Ilizarov external fixation technology and 40 patients in the study group treated with vacuum pressure sealing drainage and antibiotics on the basis of the control group.Bone healing time and daily walking were recorded.Rasmussen score,serum intercellular adhesion molecule-1(ICAM-1)and IL-6 levels,lower limb Fugl-Meyer motor function score and lower limb BI index score were compared at different time.Results:The daily walking condition of the study group was significantly better than that of the control group(P<0.05),and the healing time of bone was significantly shorter than that of the control group(P<0.05);the Rasmussen score of the study group was higher than that of the control group at 1 month,6 months and 12 months after treatment(P<0.05);the levels of serum ICAM-1 and IL-6 in the two groups after treatment were lower than those before treatment(P<0.05),and the levels of serum ICAM-1 and IL-6 in the study group were lower than those in the control group after treatment(P<0.05).The lower limb Fugl-Meyer motor function score and lower limb BI index score of the two groups after treatment were higher than those before treatment(P<0.05),and the lower limb Fugl-Meyer motor function score and lower limb BI index score of the study group after treatment were higher than those of the control group(P<0.05).Conclusions:Ilizarov external fixation combined with vacuum pressure sealing drainage and antibiotics can promote the bone healing of patients with infective tibial nonunion,significantly improving their daily walking condition,alleviating inflammation,and recovering the knee joint function and lower limb function well.展开更多
The correlation of the inhomogeneous broadening of the resonance transition at different time intervals and the efficiency of long-lived photon echo response locking by the action of standing waves of non-resonant las...The correlation of the inhomogeneous broadening of the resonance transition at different time intervals and the efficiency of long-lived photon echo response locking by the action of standing waves of non-resonant laser pulses are considered. It is shown that the long-lived photon echo response locking effect may be observed even at the angles of the relative orientation of the non-resonant standing wave laser pulses of less than one degree, due to the change in the correlation coefficient of inhomogeneous broadening at time intervals between the first and the second and after the third resonant laser pulses.展开更多
Loss of synapse and functional connectivity in brain circuits is associated with aging and neurodegeneration,however,few molecular mechanisms are known to intrinsically promote synaptogenesis or enhance synapse functi...Loss of synapse and functional connectivity in brain circuits is associated with aging and neurodegeneration,however,few molecular mechanisms are known to intrinsically promote synaptogenesis or enhance synapse function.We have previously shown that MET receptor tyrosine kinase in the developing cortical circuits promotes dendritic growth and dendritic spine morphogenesis.To investigate whether enhancing MET in adult cortex has synapse regenerating potential,we created a knockin mouse line,in which the human MET gene expression and signaling can be turned on in adult(10–12 months)cortical neurons through doxycycline-containing chow.We found that similar to the developing brain,turning on MET signaling in the adult cortex activates small GTPases and increases spine density in prefrontal projection neurons.These findings are further corroborated by increased synaptic activity and transient generation of immature silent synapses.Prolonged MET signaling resulted in an increasedα-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid/N-methyl-Daspartate(AMPA/NMDA)receptor current ratio,indicative of enhanced synaptic function and connectivity.Our data reveal that enhancing MET signaling could be an interventional approach to promote synaptogenesis and preserve functional connectivity in the adult brain.These findings may have implications for regenerative therapy in aging and neurodegeneration conditions.展开更多
With rapid growth of power demand, transmission capacity is also in urgent need of upgrading. In some cases, converting existing AC transmission lines to DC lines can Improve the transmission capacity and reduce the c...With rapid growth of power demand, transmission capacity is also in urgent need of upgrading. In some cases, converting existing AC transmission lines to DC lines can Improve the transmission capacity and reduce the construction investment. In this paper, the upstream finite element method was expanded to calculate the total electric field of same tower multi-circuit DC lines converted from double-circuit AC lines, and the validity of the algorithm was confirmed by experiments. Taking a DC line converted from a typical same tower 500 kV double-circuit AC transmission line as an example, the surface electric field and the ground total electric field in different pole conductor arrangement schemes were calculated and analyzed, and the critical height of pole conductors for DC lines in residential and non-residential area were determined. Then, the corridor width of DC and AC lines at critical height in residential and non-residential areas before and after AC-DC line transformation were compared. The results indicate that for DC lines converted from common 500 kV double-circuit AC lines, the ground total electric field can meet the requirements of corresponding standard with appropriate pole conductor arrangement schemes.展开更多
The water Cherenkov detector array(WCDA) is an important part of the large high-altitude air shower observatory(LHAASO),which is in a research and development phase.The central scientific goal of LHAASO is to explore ...The water Cherenkov detector array(WCDA) is an important part of the large high-altitude air shower observatory(LHAASO),which is in a research and development phase.The central scientific goal of LHAASO is to explore the origin of high-energy cosmic rays of the universe and to push forward the frontier of new physics.To simplify the WCDA's readout electronics,a prototype of a front-end readout for an application-specific integrated circuit(ASIC) is designed based on the timeover-threshold method to achieve charge-to-time conversion.High-precision time measurement and charge measurement are necessary over a full dynamic range[1-4000photoelectrons(P.E.)].To evaluate the performance of this ASIC,a test system is designed that includes the front-end ASIC test module,digitization module,and test software.The first module needs to be customized for different ASIC versions,whereas the digitization module and test software are tested for general-purpose use.In the digitization module,a field programmable gate array-based time-todigital converter is designed with a bin size of 333 ps,which also integrates an inter-integrated circuit to configure the ASIC test module,and a universal serial bus interface is designed to transfer data to the remote computer.Test results indicate that the time resolution is better than 0.5 ns,and the charge resolution is better than 30%root mean square(RMS) at 1 P.E.and 3%RMS at 4000 P.E.,which are beyond the application requirements.展开更多
A big step forward to improve power system monitoring and performance, continued load growth without a corresponding increase in transmission resources has resulted in reduced operational margins for many power system...A big step forward to improve power system monitoring and performance, continued load growth without a corresponding increase in transmission resources has resulted in reduced operational margins for many power systems worldwide and has led to operation of power systems closer to their stability limits and to power exchange in new patterns. These issues, as well as the on-going worldwide trend towards deregulation of the entire industry on the one hand and the increased need for accurate and better network monitoring on the other hand, force power utilities exposed to this pressure to demand new solutions for wide area monitoring, protection and control. Wide-area monitoring, protection, and control require communicating the specific-node information to a remote station but all information should be time synchronized so that to neutralize the time difference between information. It gives a complete simultaneous snap shot of the power system. The conventional system is not able to satisfy the time-synchronized requirement of power system. Phasor Measurement Unit (PMU) is enabler of time-synchronized measurement, it communicate the synchronized local information to remote station.展开更多
Once people have a well-trained motor skill, their performance becomes stabilized and achieving substantial improvement is difficult. Recently, we have shown that even a plateaued hand motor skill can be upgraded with...Once people have a well-trained motor skill, their performance becomes stabilized and achieving substantial improvement is difficult. Recently, we have shown that even a plateaued hand motor skill can be upgraded with short-period electrical stimulation to the hand prior to the task. Here, we identify the neuronal substrates underlying the improvement of the plateaued skill by examining the enhanced functional connectivity in the sensory-motor regions that are associated with motor learning. We measured brain activity using functional magnetic resonance imaging and performed psychophysiological interaction analysis. We recruited seven right-handed very-well trained participants, whose motor performance of continuously rotating two balls with their right hands became stabilized at higher performance levels. We prepared two experiments, in each of which they repeated an experimental run 16 times. In each run, they performed this cyclic rotation as many times as possible in 16 s. In the thenar-stimulation experiment, we applied 60-s stimulation to the thenar muscle before each of the 5th - 12th runs, and the others were preceded by ineffective sham stimulation. In the control experiment, the sham was always provided. Thenar stimulation enabled the participants to perform the movements at higher cycles. In association with this performance improvement, we found enhanced activity couplings between the primary motor cortex and the sensorimotor territory of the putamen and between the cerebellum and the primary sensorimotor cortices, without any quantitative activity increase. Neither behavioral change nor these increased activity couplings were observed in the control.Thus, in contrast to the stable neuronal states in the cortico-subcortical motor circuits when the well-learned task is repeated at the later stages of motor skill learning, plastic changes in the motor circuits seem to be required when the plateaued skill is upgraded, and the stimulation may entail a state of readiness for the plastic change that allows subsequent performance improvement.展开更多
In this study, a simple and effective technique for establishing an external mass transfer model in a recirculated packed-bed batch reactor (RPBBR) with an immobilized lipase enzyme and Jatropha oil system is presente...In this study, a simple and effective technique for establishing an external mass transfer model in a recirculated packed-bed batch reactor (RPBBR) with an immobilized lipase enzyme and Jatropha oil system is presented. The external mass transfer effect can be represented with a model in the form of Colburn factor JD = K Re-(1–n). The value of K and n were derived from experimental data at different mass flow rates.The experiment shows an average increment of 1.51% FFA for calcium alginate and 1.62% FFA for carrageenan after the hydrolysis took place. Based on different biopolymer material used in immobilized beads, JD = 1.674 Re-0.4 for calcium alginate and JD = 1.881 Re-0.3 for k-carrageenan were found to be adequate to predict the experimental data for external mass transfer in the reactor in the Reynolds number range of 0.2 to 1.2. The purposed model can be used for the design of industrial bioreactor and scale up. Besides, the external mass transfer coefficients for the hydrolysis of Jatropha oil reaction and the entrapment efficiency for the two biopolymer materials used were also investigated.展开更多
BACKGROUND Pain in the back or pelvis or fear of back pain may affect the timing or cocontraction of the core muscles.In both static and dynamic movements,the Sahrmann core stability test provides an assessment of cor...BACKGROUND Pain in the back or pelvis or fear of back pain may affect the timing or cocontraction of the core muscles.In both static and dynamic movements,the Sahrmann core stability test provides an assessment of core muscle activation and a person's ability to stabilize the lumbopelvic complex.Preparatory cues and images can be used to increase the activation of these muscles.To attain optimal movement patterns,it will be necessary to determine what cueing will give the most effective results for core stability.AIM To investigate the effects of external and internal cues on core muscle activation during the Sahrmann five-level core stability test.METHODS Total 68 participants(21.83±3.47 years)were randomly allocated to an external(n=35)or internal cue group(n=33).Participants performed the Sahrmann fivelevel core stability test without a cue as baseline and the five-level stability exercises with an internal or external cue.External cue group received a pressure biofeedback unit(PBU),and the internal cue group received an audio cue.A Delsys Trigno^(TM)surface electromyography unit was used for muscle activation from the rectus abdominis,external oblique,and transverse abdominis/internal oblique muscles.RESULTS Linear mixed effects model analysis showed that cueing had a significant effect on core muscle activation(P=0.001);however,there was no significant difference between cue types(internal or external)(P=0.130).CONCLUSION Both external and internal cueing have significant effects on core muscle activation during the Sahrmann five-level core stability test and the PBU does not create higher muscle activation than internal cueing.展开更多
As air descends the intake shaft, its infrastructure, lining and the strata will emit heat during the night when the intake air is cool and, on the contrary, will absorb heat during the day when the temperature of the...As air descends the intake shaft, its infrastructure, lining and the strata will emit heat during the night when the intake air is cool and, on the contrary, will absorb heat during the day when the temperature of the air becomes greater than that of the strata. This cyclic phenomenon, also known as the "thermal damping effect" will continue throughout the year reducing the effect of surface air temperature variation. The objective of this paper is to quantify the thermal damping effect in vertical underground airways. A nonlinear autoregressive time series with external input(NARX) algorithm was used as a novel method to predict the dry-bulb temperature(Td) at the bottom of intake shafts as a function of surface air temperature. Analyses demonstrated that the artificial neural network(ANN) model could accurately predict the temperature at the bottom of a shaft. Furthermore, an attempt was made to quantify typical "damping coefficient" for both production and ventilation shafts through simple linear regression models. Comparisons between the collected climatic data and the regression-based predictions show that a simple linear regression model provides an acceptable accuracy when predicting the Tdat the bottom of intake shafts.展开更多
In this paper, an attempt has been made to produce a recipient system of wireless charge for a simple hearing aid so that electrical signal would be generated through detecting and receiving radio frequency waves (RF)...In this paper, an attempt has been made to produce a recipient system of wireless charge for a simple hearing aid so that electrical signal would be generated through detecting and receiving radio frequency waves (RF). The purpose of this design is to receive wireless charge for hearing aids and basically for any electronic device which is not required to a high energy for being setup. In this study, it has been demonstrated that as the amount of radio receiving energy increases, distance of receiver from antenna should be decreased;otherwise, either maximum amount of the receiving energy, or signal power density of the transmitter should be increased. Since it is impossible to be performed, it is decided to set up an energy receiving system constructed by rectenna and charge Circuit and to adjust their parameters to provide energy requirements for a device with low-power consumption. In this paper, different components of an energy receiving system from radio frequency band have been mentioned and a diagram block has been suggested. Subsequently, input impedance of designed antenna has been adjusted by provided relations. This impedance should be adjusted with the total impedance of regarded hearing aid Circuit by which the highest amount of received signal power is transferred to the battery of hearing aids. Received signal is converted to a dc voltage by rectifier diode. Finally, by applying a voltage regulator which has been designed using a common-collector amplifier not only the output voltage is kept constant, but the power is also strengthened. The battery of the hearing aids will be charged using the obtained power and voltage.展开更多
In order to detecting and tracking along the weld seam with rotating arc sensor in underwater welding,the highpressure water environment rotating arc welding hardware platform is established and welding experiments us...In order to detecting and tracking along the weld seam with rotating arc sensor in underwater welding,the highpressure water environment rotating arc welding hardware platform is established and welding experiments using rotating arc sensor is done. Different radius of rotating arc sensor is used. And the corresponding welding current and voltage is obtained,which is compared with the results of rotating arc sensor short-circuit process simulation model under high-pressure water environment established in this article. The results show that under high-pressure water environment,rotating arc radius should be optimized,otherwise the short-circuit-arcing cycle will transit to a short-circuit-arcing-abruption cycle,making the welding quality poor. At last the critical radius between the short-circuit-arcing cycle and short-circuit-arcing-abruption cycle under high-pressure water environment is obtained.展开更多
The state of the p-n junction is very important to explain the performances of a solar cell. Some works give the influence of the electric field on the junction capacitance. However, these works do not relate the qual...The state of the p-n junction is very important to explain the performances of a solar cell. Some works give the influence of the electric field on the junction capacitance. However, these works do not relate the quality of the p-n junction under the electic field. The present manuscript is about a theoretical modelling of the p-n junction capacitance behavior of the polycrystalline silicon solar cell under an integration of the external electrical field source. An external electrical source is integrated in a solar cell system. The electronic carriers charge generated in the solar cell crossed mainly the junction with the great strength external electrical field. In open circuit, this crossing of the electronic charge carriers causes the thermal heating of the p-n junction by Joule effect. The p-n junction capacitance plotted versus the junction dynamic velocity and the photo-voltage for different external electrical fields. The electric field causes the decrease of the photo-voltage mainly the open-circuit photo-voltage. The decrease of the photo-voltage translates the narrowing of the Space Charge Region (SCR). The average value of the external electric field used in this study is not sufficient to cause the breakdown of the p-n junction of the solar cell system under integration of the external electrical field production source. The increase of the electrical field causes rather the narrowing of the SCR. That can provide an improvement of the solar cell’s electrical outputs.展开更多
In this paper we consider of natural oscillations cylindrical bodies with external friction. Complex rates changes from friction parameters are shown. Rate equations are solved numerically—by method of Muller.
Objective: To evaluate the effectiveness of the damage control, in emergency to treat the open tibial pilon fractures with Dolphix? External Fixator Frame(CITIEFFE?, Calderara di Reno, Bologna, Italy). Methods: From J...Objective: To evaluate the effectiveness of the damage control, in emergency to treat the open tibial pilon fractures with Dolphix? External Fixator Frame(CITIEFFE?, Calderara di Reno, Bologna, Italy). Methods: From January 2017 to August 2017, at the Department of Orthopedics and Traumatology of Vito Fazzi Hospital Lecce, we treated 23 open tibial pilon fractures with Dolphix? External Fixator Frame(CITIEFFE?, Calderara di Reno, Bologna, Italy). The evaluation criteria of the case series were: the time needed to assemble the external fixator;the time taked to treat the ankle associated lesions;the time of skin healing;the ankle alignment;the subjective/objective Ovadia and Beals score;and complications. The Endpoint assessment was set at the days of the definitive surgery. Results: The results in terms of alignment, biomechanical stability of the frame, healing of soft tissue, complications were as good as the objective and subjective results according Ovadia and Beals score. Conclusion:Pilon fractures are complex and often present complications;the damage control treatment, in emergency, with Dolphix? External Fixator Frame(CITIEFFE?, Calderara di Reno, Bologna, Italy) permits a stable osteotaxis with minimal soft tissue damage and permit the repair of muscles, blood vessels and nerves with a stable bone and the soft tissue healing with vaccum therapy.展开更多
文摘Starting from a philosophical perspective,which states that the living structures are actually a combination between matter and information,this article presents the results on an analysis of the bipolar information-matter structure of the human organism,distinguishing three fundamental circuits for its survival,which demonstrates and supports this statement,as a base for further development of the informational model of consciousness to a general informational model of the human organism.For this,it was examined the Informational System of the Human Body and its components from the perspective of the physics/information/neurosciences concepts,showing specific functions of each of them,highlighting the correspondence of these centers with brain support areas and with their projections in consciousness,which are:Center of Acquisition and Storing of Information(CASI)reflected in consciousness as memory,Center of Decision and Command(CDC)(decision),Info-Emotional Center(IES)(emotions),Maintenance Informational System(MIS)(personal status),Genetic Transmission System(GTS)(associativity/genetic transmission)and Info Genetic Generator(IGG)related by the body development and inherited behaviors.The Info Connection(IC),detected in consciousness as trust and confidence can explain the Near-Death Experiences(NDEs)and associated phenomena.This connection is antientropic and informational,because from the multitude of uncertain possibilities is selected a certain one,helping/supporting the survival and life.The human body appears therefore as a bipolar structure,connected to two poles:information and matter.It is argued that the survival,which is the main objective of the organism,is complied in three main ways,by means of:(i)the reactive operation for adaptation by attitude;(ii)the info-genetic integration of information by epigenetic processes and genetic transmission of information for species survival,both circuits(i)and(ii)being associated to the information pole;(iii)maintenance of the material body(defined as informed matter)and its functions,associated to the matter pole of the organism.It results therefore that the informational system of the human body is supported by seven informational circuits formed by the neuro-connections between the specific zones of the brain corresponding to the informational subsystems,the cognitive centers,the sensors,transducers and execution(motor/mobile)elements.The fundamental informational circuits assuring the survival are the reactive circuit,expressible by attitude,the epigenetic/genetic circuit,absorbing and codifying information to be transmitted to the next generations,and the metabolic circuit,connected to matter(matter pole).The presented analysis allows to extend the informational modeling of consciousness to an Informational Model of Consciousness and Organism,fully describing the composition/functions of the organism in terms of information/matter and neurosciences concepts.
文摘This paper presents a novel approach to design robust Source Coupled Logic (SCL) for implementing ultra low power circuits. In this paper, we propose two different source coupled logic structures and analyze the performance of these structures with STSCL (Sub-threshold SCL). The first design under consideration is DTPMOS as load device which analyses the performance of Dynamic Threshold SCL (DTSCL) Logic with previous source coupled logic for ultra low power operation. DTSCL circuits exhibit a better power-delay Performance compared with the STSCL Logic. It can be seen that the proposed circuit provides 56% reduction in power delay product. The second design under consideration uses basic current mirror active load device to provide required voltage swing. Current mirror source coupled logic (CMSCL) can be used for high speed operation. The advantage of this design is that it provides 54% reduction in power delay product over conventional STSCL. The main drawback of this design is that it provides a higher power dissipation compared to other source coupled logic structures. The proposed circuit provides lower sensitivity to temperature and power supply variation, with a superior control over power dissipation. Measurements of test structures simulated in 0.18 μm CMOS technology shows that the proposed DTSCL logic concept can be utilized successfully for bias currents as low as 1 pA. Measurements show that existing standard cell libraries offer a good solution for ultra low power SCL circuits. Cadence Virtuoso schematic editor and Spectre Simulation tools have been used.
基金Qinghai provincial commission of health and family planning appropriate technology promotion project(2018-wjtg-03).
文摘Objective:Observation on the effect of Ilizarov external fixation combined with vacuum pressure sealing drainage and antibiotics in the treatment of infective tibial nonunion.Methods:79 patients with tibial infective nonunion who were treated in our hospital from August 2016 to August 2018 were divided into two groups according to random number table,with 39 patients in the control group treated with Ilizarov external fixation technology and 40 patients in the study group treated with vacuum pressure sealing drainage and antibiotics on the basis of the control group.Bone healing time and daily walking were recorded.Rasmussen score,serum intercellular adhesion molecule-1(ICAM-1)and IL-6 levels,lower limb Fugl-Meyer motor function score and lower limb BI index score were compared at different time.Results:The daily walking condition of the study group was significantly better than that of the control group(P<0.05),and the healing time of bone was significantly shorter than that of the control group(P<0.05);the Rasmussen score of the study group was higher than that of the control group at 1 month,6 months and 12 months after treatment(P<0.05);the levels of serum ICAM-1 and IL-6 in the two groups after treatment were lower than those before treatment(P<0.05),and the levels of serum ICAM-1 and IL-6 in the study group were lower than those in the control group after treatment(P<0.05).The lower limb Fugl-Meyer motor function score and lower limb BI index score of the two groups after treatment were higher than those before treatment(P<0.05),and the lower limb Fugl-Meyer motor function score and lower limb BI index score of the study group after treatment were higher than those of the control group(P<0.05).Conclusions:Ilizarov external fixation combined with vacuum pressure sealing drainage and antibiotics can promote the bone healing of patients with infective tibial nonunion,significantly improving their daily walking condition,alleviating inflammation,and recovering the knee joint function and lower limb function well.
文摘The correlation of the inhomogeneous broadening of the resonance transition at different time intervals and the efficiency of long-lived photon echo response locking by the action of standing waves of non-resonant laser pulses are considered. It is shown that the long-lived photon echo response locking effect may be observed even at the angles of the relative orientation of the non-resonant standing wave laser pulses of less than one degree, due to the change in the correlation coefficient of inhomogeneous broadening at time intervals between the first and the second and after the third resonant laser pulses.
基金supported by NIH/NIMH grant R01MH111619(to SQ),R21AG078700(to SQ)Institute of Mental Health Research(IMHR,Level 1 funding,to SQ and DF)institution startup fund from The University of Arizona(to SQ)。
文摘Loss of synapse and functional connectivity in brain circuits is associated with aging and neurodegeneration,however,few molecular mechanisms are known to intrinsically promote synaptogenesis or enhance synapse function.We have previously shown that MET receptor tyrosine kinase in the developing cortical circuits promotes dendritic growth and dendritic spine morphogenesis.To investigate whether enhancing MET in adult cortex has synapse regenerating potential,we created a knockin mouse line,in which the human MET gene expression and signaling can be turned on in adult(10–12 months)cortical neurons through doxycycline-containing chow.We found that similar to the developing brain,turning on MET signaling in the adult cortex activates small GTPases and increases spine density in prefrontal projection neurons.These findings are further corroborated by increased synaptic activity and transient generation of immature silent synapses.Prolonged MET signaling resulted in an increasedα-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid/N-methyl-Daspartate(AMPA/NMDA)receptor current ratio,indicative of enhanced synaptic function and connectivity.Our data reveal that enhancing MET signaling could be an interventional approach to promote synaptogenesis and preserve functional connectivity in the adult brain.These findings may have implications for regenerative therapy in aging and neurodegeneration conditions.
文摘With rapid growth of power demand, transmission capacity is also in urgent need of upgrading. In some cases, converting existing AC transmission lines to DC lines can Improve the transmission capacity and reduce the construction investment. In this paper, the upstream finite element method was expanded to calculate the total electric field of same tower multi-circuit DC lines converted from double-circuit AC lines, and the validity of the algorithm was confirmed by experiments. Taking a DC line converted from a typical same tower 500 kV double-circuit AC transmission line as an example, the surface electric field and the ground total electric field in different pole conductor arrangement schemes were calculated and analyzed, and the critical height of pole conductors for DC lines in residential and non-residential area were determined. Then, the corridor width of DC and AC lines at critical height in residential and non-residential areas before and after AC-DC line transformation were compared. The results indicate that for DC lines converted from common 500 kV double-circuit AC lines, the ground total electric field can meet the requirements of corresponding standard with appropriate pole conductor arrangement schemes.
基金supported by the Knowledge Innovation Program of the Chinese Academy of Sciences(KJCX2-YW-N27)the CAS Center for Excellence in Particle Physics(CCEPP)
文摘The water Cherenkov detector array(WCDA) is an important part of the large high-altitude air shower observatory(LHAASO),which is in a research and development phase.The central scientific goal of LHAASO is to explore the origin of high-energy cosmic rays of the universe and to push forward the frontier of new physics.To simplify the WCDA's readout electronics,a prototype of a front-end readout for an application-specific integrated circuit(ASIC) is designed based on the timeover-threshold method to achieve charge-to-time conversion.High-precision time measurement and charge measurement are necessary over a full dynamic range[1-4000photoelectrons(P.E.)].To evaluate the performance of this ASIC,a test system is designed that includes the front-end ASIC test module,digitization module,and test software.The first module needs to be customized for different ASIC versions,whereas the digitization module and test software are tested for general-purpose use.In the digitization module,a field programmable gate array-based time-todigital converter is designed with a bin size of 333 ps,which also integrates an inter-integrated circuit to configure the ASIC test module,and a universal serial bus interface is designed to transfer data to the remote computer.Test results indicate that the time resolution is better than 0.5 ns,and the charge resolution is better than 30%root mean square(RMS) at 1 P.E.and 3%RMS at 4000 P.E.,which are beyond the application requirements.
文摘A big step forward to improve power system monitoring and performance, continued load growth without a corresponding increase in transmission resources has resulted in reduced operational margins for many power systems worldwide and has led to operation of power systems closer to their stability limits and to power exchange in new patterns. These issues, as well as the on-going worldwide trend towards deregulation of the entire industry on the one hand and the increased need for accurate and better network monitoring on the other hand, force power utilities exposed to this pressure to demand new solutions for wide area monitoring, protection and control. Wide-area monitoring, protection, and control require communicating the specific-node information to a remote station but all information should be time synchronized so that to neutralize the time difference between information. It gives a complete simultaneous snap shot of the power system. The conventional system is not able to satisfy the time-synchronized requirement of power system. Phasor Measurement Unit (PMU) is enabler of time-synchronized measurement, it communicate the synchronized local information to remote station.
文摘Once people have a well-trained motor skill, their performance becomes stabilized and achieving substantial improvement is difficult. Recently, we have shown that even a plateaued hand motor skill can be upgraded with short-period electrical stimulation to the hand prior to the task. Here, we identify the neuronal substrates underlying the improvement of the plateaued skill by examining the enhanced functional connectivity in the sensory-motor regions that are associated with motor learning. We measured brain activity using functional magnetic resonance imaging and performed psychophysiological interaction analysis. We recruited seven right-handed very-well trained participants, whose motor performance of continuously rotating two balls with their right hands became stabilized at higher performance levels. We prepared two experiments, in each of which they repeated an experimental run 16 times. In each run, they performed this cyclic rotation as many times as possible in 16 s. In the thenar-stimulation experiment, we applied 60-s stimulation to the thenar muscle before each of the 5th - 12th runs, and the others were preceded by ineffective sham stimulation. In the control experiment, the sham was always provided. Thenar stimulation enabled the participants to perform the movements at higher cycles. In association with this performance improvement, we found enhanced activity couplings between the primary motor cortex and the sensorimotor territory of the putamen and between the cerebellum and the primary sensorimotor cortices, without any quantitative activity increase. Neither behavioral change nor these increased activity couplings were observed in the control.Thus, in contrast to the stable neuronal states in the cortico-subcortical motor circuits when the well-learned task is repeated at the later stages of motor skill learning, plastic changes in the motor circuits seem to be required when the plateaued skill is upgraded, and the stimulation may entail a state of readiness for the plastic change that allows subsequent performance improvement.
文摘In this study, a simple and effective technique for establishing an external mass transfer model in a recirculated packed-bed batch reactor (RPBBR) with an immobilized lipase enzyme and Jatropha oil system is presented. The external mass transfer effect can be represented with a model in the form of Colburn factor JD = K Re-(1–n). The value of K and n were derived from experimental data at different mass flow rates.The experiment shows an average increment of 1.51% FFA for calcium alginate and 1.62% FFA for carrageenan after the hydrolysis took place. Based on different biopolymer material used in immobilized beads, JD = 1.674 Re-0.4 for calcium alginate and JD = 1.881 Re-0.3 for k-carrageenan were found to be adequate to predict the experimental data for external mass transfer in the reactor in the Reynolds number range of 0.2 to 1.2. The purposed model can be used for the design of industrial bioreactor and scale up. Besides, the external mass transfer coefficients for the hydrolysis of Jatropha oil reaction and the entrapment efficiency for the two biopolymer materials used were also investigated.
文摘BACKGROUND Pain in the back or pelvis or fear of back pain may affect the timing or cocontraction of the core muscles.In both static and dynamic movements,the Sahrmann core stability test provides an assessment of core muscle activation and a person's ability to stabilize the lumbopelvic complex.Preparatory cues and images can be used to increase the activation of these muscles.To attain optimal movement patterns,it will be necessary to determine what cueing will give the most effective results for core stability.AIM To investigate the effects of external and internal cues on core muscle activation during the Sahrmann five-level core stability test.METHODS Total 68 participants(21.83±3.47 years)were randomly allocated to an external(n=35)or internal cue group(n=33).Participants performed the Sahrmann fivelevel core stability test without a cue as baseline and the five-level stability exercises with an internal or external cue.External cue group received a pressure biofeedback unit(PBU),and the internal cue group received an audio cue.A Delsys Trigno^(TM)surface electromyography unit was used for muscle activation from the rectus abdominis,external oblique,and transverse abdominis/internal oblique muscles.RESULTS Linear mixed effects model analysis showed that cueing had a significant effect on core muscle activation(P=0.001);however,there was no significant difference between cue types(internal or external)(P=0.130).CONCLUSION Both external and internal cueing have significant effects on core muscle activation during the Sahrmann five-level core stability test and the PBU does not create higher muscle activation than internal cueing.
基金funded by National Institute for Occupational Safety and Health (NIOSH) (No. 2014-N-15795, 2014)
文摘As air descends the intake shaft, its infrastructure, lining and the strata will emit heat during the night when the intake air is cool and, on the contrary, will absorb heat during the day when the temperature of the air becomes greater than that of the strata. This cyclic phenomenon, also known as the "thermal damping effect" will continue throughout the year reducing the effect of surface air temperature variation. The objective of this paper is to quantify the thermal damping effect in vertical underground airways. A nonlinear autoregressive time series with external input(NARX) algorithm was used as a novel method to predict the dry-bulb temperature(Td) at the bottom of intake shafts as a function of surface air temperature. Analyses demonstrated that the artificial neural network(ANN) model could accurately predict the temperature at the bottom of a shaft. Furthermore, an attempt was made to quantify typical "damping coefficient" for both production and ventilation shafts through simple linear regression models. Comparisons between the collected climatic data and the regression-based predictions show that a simple linear regression model provides an acceptable accuracy when predicting the Tdat the bottom of intake shafts.
文摘In this paper, an attempt has been made to produce a recipient system of wireless charge for a simple hearing aid so that electrical signal would be generated through detecting and receiving radio frequency waves (RF). The purpose of this design is to receive wireless charge for hearing aids and basically for any electronic device which is not required to a high energy for being setup. In this study, it has been demonstrated that as the amount of radio receiving energy increases, distance of receiver from antenna should be decreased;otherwise, either maximum amount of the receiving energy, or signal power density of the transmitter should be increased. Since it is impossible to be performed, it is decided to set up an energy receiving system constructed by rectenna and charge Circuit and to adjust their parameters to provide energy requirements for a device with low-power consumption. In this paper, different components of an energy receiving system from radio frequency band have been mentioned and a diagram block has been suggested. Subsequently, input impedance of designed antenna has been adjusted by provided relations. This impedance should be adjusted with the total impedance of regarded hearing aid Circuit by which the highest amount of received signal power is transferred to the battery of hearing aids. Received signal is converted to a dc voltage by rectifier diode. Finally, by applying a voltage regulator which has been designed using a common-collector amplifier not only the output voltage is kept constant, but the power is also strengthened. The battery of the hearing aids will be charged using the obtained power and voltage.
基金supported by the National Natural Science Foundation of China(Grant No.51665016)founded by the China Scholarship Council(Grant No.201508360113)
文摘In order to detecting and tracking along the weld seam with rotating arc sensor in underwater welding,the highpressure water environment rotating arc welding hardware platform is established and welding experiments using rotating arc sensor is done. Different radius of rotating arc sensor is used. And the corresponding welding current and voltage is obtained,which is compared with the results of rotating arc sensor short-circuit process simulation model under high-pressure water environment established in this article. The results show that under high-pressure water environment,rotating arc radius should be optimized,otherwise the short-circuit-arcing cycle will transit to a short-circuit-arcing-abruption cycle,making the welding quality poor. At last the critical radius between the short-circuit-arcing cycle and short-circuit-arcing-abruption cycle under high-pressure water environment is obtained.
文摘The state of the p-n junction is very important to explain the performances of a solar cell. Some works give the influence of the electric field on the junction capacitance. However, these works do not relate the quality of the p-n junction under the electic field. The present manuscript is about a theoretical modelling of the p-n junction capacitance behavior of the polycrystalline silicon solar cell under an integration of the external electrical field source. An external electrical source is integrated in a solar cell system. The electronic carriers charge generated in the solar cell crossed mainly the junction with the great strength external electrical field. In open circuit, this crossing of the electronic charge carriers causes the thermal heating of the p-n junction by Joule effect. The p-n junction capacitance plotted versus the junction dynamic velocity and the photo-voltage for different external electrical fields. The electric field causes the decrease of the photo-voltage mainly the open-circuit photo-voltage. The decrease of the photo-voltage translates the narrowing of the Space Charge Region (SCR). The average value of the external electric field used in this study is not sufficient to cause the breakdown of the p-n junction of the solar cell system under integration of the external electrical field production source. The increase of the electrical field causes rather the narrowing of the SCR. That can provide an improvement of the solar cell’s electrical outputs.
文摘In this paper we consider of natural oscillations cylindrical bodies with external friction. Complex rates changes from friction parameters are shown. Rate equations are solved numerically—by method of Muller.
文摘Objective: To evaluate the effectiveness of the damage control, in emergency to treat the open tibial pilon fractures with Dolphix? External Fixator Frame(CITIEFFE?, Calderara di Reno, Bologna, Italy). Methods: From January 2017 to August 2017, at the Department of Orthopedics and Traumatology of Vito Fazzi Hospital Lecce, we treated 23 open tibial pilon fractures with Dolphix? External Fixator Frame(CITIEFFE?, Calderara di Reno, Bologna, Italy). The evaluation criteria of the case series were: the time needed to assemble the external fixator;the time taked to treat the ankle associated lesions;the time of skin healing;the ankle alignment;the subjective/objective Ovadia and Beals score;and complications. The Endpoint assessment was set at the days of the definitive surgery. Results: The results in terms of alignment, biomechanical stability of the frame, healing of soft tissue, complications were as good as the objective and subjective results according Ovadia and Beals score. Conclusion:Pilon fractures are complex and often present complications;the damage control treatment, in emergency, with Dolphix? External Fixator Frame(CITIEFFE?, Calderara di Reno, Bologna, Italy) permits a stable osteotaxis with minimal soft tissue damage and permit the repair of muscles, blood vessels and nerves with a stable bone and the soft tissue healing with vaccum therapy.