Prediction of Grinding Force by an Electroplated Grinding Wheel with Orderly-Micro-Grooves

The ability to predict a grinding force is important to control,monitor,and optimize the grinding process.Few theoretical models were developed to predict grinding forces when a structured wheel was used in a grinding process.This paper aimed to establish a single-grit cutting force model to predict the ploughing,friction and cutting forces in a grinding process.It took into the consideration of actual topography of the grinding wheel,and a theoretical grinding force model for grinding hardened AISI 52100 by the wheel with orderly-micro-grooves was proposed.The model was innovative in the sense that it represented the random thickness of undeformed chips by a probabilistic expression,and it reflected the microstructure characteristics of the structured wheel explicitly.Note that the microstructure depended on the randomness of the protruding heights and distribution density of the grits over the wheel.The proposed force prediction model was validated by surface grinding experiments,and the results showed(1)a good agreement of the predicted and measured forces and(2)a good agreement of the changes of the grinding forces along with the changes of grinding parameters in the prediction model and experiments.This research proposed a theoretical grinding force model of an electroplated grinding wheel with orderly-micro-grooves which is accurate,reliable and effective in predicting grinding forces.

Comprehensive modeling approach of axial ultrasonic vibration grinding force

The theoretical model of axial ultrasonic vibration grinding force is built on the basis of a mathematical model of cutting deforming force deduced from the assumptions of thickness of the undeformed debris under Rayleigh distribution and a mathematical model of friction based on the theoretical analysis of relative sliding velocity of abrasive and workpiece. Then, the coefficients of the ultrasonic vibration grinding force model are calculated through analysis of nonlinear regression of the theoretical model by using MATLAB, and the law of influence of grinding depth, workpiece speed, frequency and amplitude of the mill on the grinding force is summarized after applying the model to analyze the ultrasonic grinding force. The result of the above-mentioned law shows that the grinding force decreases as frequency and amplitude increase, while increases as grinding depth and workpiece speed increase; the maximum relative error of prediction and experimental values of the normal grinding force is 11.47% and its average relative error is 5.41%; the maximum relative error of the tangential grinding force is 10.14% and its average relative error is 4.29%. The result of employing regression equation to predict ultrasonic grinding force approximates to the experimental data, therefore the accuracy and reliability of the model is verified.

Intra-Atomic Gravitational Shielding (Lensing), Nuclear Forces and Radioactivity

The discovery by the author of real magnetic charges and true anti-electrons in the atomic structures allowed him to establish that the gravitational field (GF) in reality is the vortex electromagnetic field. Depending on the vector conditions the gravitational fields can be either paragravitational (PGF) or ferrogravitational (FGF). Masses (atoms, nucleons, etc.) emitting PGF manifest so-called attraction to each other. In fact, this process is the pressing of atoms or nucleons to each other by the forces of gravitational “Dark energy”. Namely the gravitational “Dark energy” which is formed between the masses emitting PGF and compressing of nucleons in atomic nuclei is the main force factor determining the formation of nuclear forces. Masses that emit FGF are repelled from PGF sources, for example, from the Earth. The last gravitational manifestation, discovered by the author, this is of the effect of the gravitational levitation. The atomic shell and atomic nucleus are autonomous sources of gravitational field in atomic compositions. The gravitational fields emitted these sources, by its physical parameters, are different gravitational fields, what associated with differences in the magnitudes charges of magnetic and electric particles in their compositions. The noted differences in the parameters of the GF are of reason that in atoms the process of extrusion of foreign gravitational field from the region of given gravitational source is realized. This effect should be called the effect of intra-atomic gravitational shielding (IAGS). Within the framework of this effect the shell of the atom is a kind of gravitational “insulator” that prevents the PGF of the nucleons from leaving beyond of the atom. As result of the IAGS effect, the concentration PGF of nucleons is realized only in the region of the nucleus, which leads to an increase in nuclear forces. However, the resistance of the marked “insulator” is finite and if the critical voltage PGF on the nucleus is exceeded, the complete shielding of the nucleon fields by the atomic shell is broken. As result of the leakage of a part of the PGF of nucleons beyond the atom, the density of this field in the region of the nucleus decreases significantly, which leads to a weakening of the nuclear forces and often leads to radioactivity. The effect of gravitational shielding is directly related to such a well-known concept as the mass defect of the nucleus. It is the exclusion of the gravitational field formed by the nucleons in the composition of the atomic nucleus as a result of the full IAGS effect that creates the illusion of atomic mass defect.

A framework of force of information influence and application for C4KISR system

The subversive nature of information war lies not only in the information itself, but also in the circulation and application of information. It has always been a challenge to quantitatively analyze the function and effect of information flow through command, control, communications, computer, kill, intelligence,surveillance, reconnaissance (C4KISR) system. In this work, we propose a framework of force of information influence and the methods for calculating the force of information influence between C4KISR nodes of sensing, intelligence processing,decision making and fire attack. Specifically, the basic concept of force of information influence between nodes in C4KISR system is formally proposed and its mathematical definition is provided. Then, based on the information entropy theory, the model of force of information influence between C4KISR system nodes is constructed. Finally, the simulation experiments have been performed under an air defense and attack scenario. The experimental results show that, with the proposed force of information influence framework, we can effectively evaluate the contribution of information circulation through different C4KISR system nodes to the corresponding tasks. Our framework of force of information influence can also serve as an effective tool for the design and dynamic reconfiguration of C4KISR system architecture.

The Substructure of Elementary Particles Demonstrated by the I-Theory

Present studies in physics assume that elementary particles are the building blocks of all matter, and that they are zero-dimensional objects which do not occupy space. The new I-Theory predicts that elementary particles do indeed have a substructure, three dimensions, and occupy space, being composed of fundamental particles called I-particles. In this article we identify the substructural pattern of elementary particles and define the quanta of energy that form each elementary particle. We demonstrate that the substructure comprises two classes of quanta which we call “attraction quanta” and “repulsion quanta”. We create a model that defines the rest-mass energy of each elementary particle and can predict new particles. Lastly, in order to incorporate this knowledge into the contemporary models of science, a revised periodic table is proposed.

Relativized Quantum Physics Generating <i>N</i>-Valued Coulomb Force and Atomic Hydrogen Energy Spectrum

Though not well-known, Einstein endeavored much of his life to general-relativize quantum mechanics, (rather than quantizing gravity). Albeit he did not succeed, his legacy lives on. In this paper, we begin with the general relativistic field equations describing flat spacetime, but stimulated by vacuum energy fluctuations. In our precursor paper, after straightforward general relativistic calculations, the resulting covariant and contravariant energy-momentum tensors were identified as n-valued operators describing graviton excitation. From these two operators, we were able to generate all three boson masses (including the Higgs mass) in precise agreement as reported in the 2010 CODATA (NIST);moreover local, as-well-as large-scale, accelerated spacetimes were shown to naturally occur from this general relativized quantum physics approach (RQP). In this paper, applying the same approach, we produce an n-valued Coulombs Force Law leading to the energy spectrum for atomic hydrogen, without assuming quantized atomic radii, velocity and momentum, as Bohr did.

Experimental Study on Grinding Force of Electrostatic Coated Grinding Wheel

In order to deal with the hard machining of TC4 alloy,coated graphite on grinding wheel surface by electrostatic device is proposed in this paper.This paper mainly completed the design of graphite electrostatic spraying grinding wheel device,force experimental analysis of grinding TC4 alloy with coated graphite grinding wheel,and summary of the influence of different grinding speeds and grinding depths on grinding force and grinding force ratio.The experimental results show that the lubrication coating can reduce the grinding force and grinding force ratio in the process of grinding TC4 alloy with graphite powder-coated wheel under electrostatic field force,compared to dry grinding with the uncoated wheel.

Electrostatic Attraction and Repulsion Explained and Modelled Mathematically Using Classical Physics—A Detailed Mechanism Based on Particle Wave Functions

The phenomenon of electrical attraction and repulsion between charged particles is well known, and described mathematically by Coulomb’s Law, yet until now there has been no explanation for why this occurs. There has been no mechanistic explanation that reveals what causes the charged particles to accelerate, either towards or away from each other. This paper gives a detailed explanation of the phenomena of electrical attraction and repulsion based on my previous work that determined the exact wave-function solutions for both the Electron and the Positron. It is revealed that the effects are caused by wave interactions between the wave functions that result in Electromagnetic reflections of parts of the particle’s wave functions, causing a change in their momenta.

Augmenting the Heat Sink for Better Heat Dissipation

Heat sinks were invented to absorb heat from an electronic circuit conduct, and then to dissipate or radiate this heat to the surrounding supposedly, ventilated space, at a rate equal to or faster than that of its buildup. Ventilation was not initially recognized as an essential factor to thermal dispersion. However, as electronic circuit-boards continued to heat up, circuit failure became a problem, forcing the inclusion of miniaturized high speed fans. Later, heat sinks with fins and quiet fans were incorporated in most manufactured circuits. Now heat sinks come in the form of a fan with fans made to function as fins to disperse heat. Heat sinks absorb and radiate excess heat from circuit-boards in order to prolong the circuit’s life span. The higher the thermal conductivity of the material used the more efficient and effective the heat sink is. This paper is an attempt to theoretically design a heat sink with a temperature gradient lower than that of the circuit board’s excess heat.

Correlation of work function and stacking fault energy through Kelvin probe force microscopy and nanohardness in diluteα-magnesium

Electronic interactions of the Group 2A elements with magnesium have been studied through the dilute solid solutions in binary Mg-Ca,Mg-Sr and Mg-Ba systems.This investigation incorporated the difference in the‘Work Function'(ΔWF)measured via Kelvin Probe Force Microscopy(KPFM),as a property directly affected by interatomic bond types,i.e.the electronic structure,nanoindentation measurements,and Stacking Fault Energy values reported in the literature.It was shown that the nano-hardness of the solid-solutionα-Mg phase changed in the order of Mg-Ca>Mg-Sr>Mg-Ba.Thus,it was shown,by also considering the nano-hardness levels,that SFE of a solid-solution is closely correlated with its‘Work Function'level.Nano-hardness measurements on the eutectics andΔWF difference between eutectic phases enabled an assessment of the relative bond strength and the pertinent electronic structures of the eutectics in the three alloys.Correlation withΔWF and at least qualitative verification of those computed SFE values with some experimental measurement techniques were considered important as those computational methods are based on zero Kelvin degree,relatively simple atomic models and a number of assumptions.As asserted by this investigation,if the results of measurement techniques can be qualitatively correlated with those of the computational methods,it can be possible to evaluate the electronic structures in alloys,starting from binary systems,going to ternary and then multi-elemental systems.Our investigation has shown that such a qualitative correlation is possible.After all,the SFE values are not treated as absolute values but rather become essential in comparative investigations when assessing the influences of alloying elements at a fundamental level,that is,free electron density distributions.Our study indicated that the principles of‘electronic metallurgy'in developing multi-elemental alloy systems can be followed via practical experimental methods,i.e.ΔWF measurements using KPFM and nanoindentation.

Model of Universe as Described by Dynamic Universe Model

In this paper we will see the model of Universe according to Dynamic Universe Model of Cosmology by visualizing various processes that are happening in the Universe as per experimental evidences. For simplifying the matter here, we will see in part 1: about the Galaxy life cycle, where the birth and death of Galaxies discussed. Probably Universe gives guidance for the movement of Galaxies. We call this Part 1: Thinking and Reproducing Universe or Mindless Universe? (Galaxy life cycle). We see every day Sun, Stars, Galaxies etc., dissipating enormous energy in the form of radiation by the way of fusion of Hydrogen to helium. So after sometime all the Hydrogen is spent and Universe will die, is it not? … Dynamic Universe Model says that the energy in the form of electromagnetic radiation passing grazingly near any gravitating mass changes in frequency and finally will convert into neutrinos (mass). Hence Dynamic Universe Model proposes another process where energy will be converted back into matter and the cycle energy to mass to energy continues, sustaining the Universe to maintain this present status for ever in this form something like a Steady state model without any expansion. This we will see in Part 2: Energy - Mass - Energy Cycle. After converting energy into mass “how various elements are formed and where they are formed?” will be next logical question. Dynamic Universe Model says that these various particles change into higher massive particles or may get bombarded into stars or planets and various elements are formed. Here we bifurcate the formation of elements into 6 processes. They are for Elementary particles and elements generated in frequency changing process, By Cosmic rays, By Small stars, By Large Stars, By Super Novae and Manmade elements By Neutron Stars. This we will discuss in Part 3: Nucleosynthesis.

EXACT SOLUTION FOR RECTANGULAR SLAB WITH THREE EDGES SIMPLY-SUPPORTED AND OTHER FREE

In this paper,we give all-sided pastic analysis of the rectangular slab with three edges simply-supported and other free.Here we discuss the following four cases:(1)The uniformly distributedload over the area a slab.(2).A concentrated load act at midpoint of free edges slab.(3)A concen-trated load act at the center a slab.(4)The line load act along free edge of slab.

Unsteady-State Grinding Technology (II) Experimental Studies of Grinding Forces and Force Ratio

As is known to all, grinding force is one of the most important parameters to evaluate the whole process of grinding. Generally, the grinding force is resolved to three component forces, namely, normal grinding force F n, tangential grinding force F t and a component force acting along the direction of longitudinal feed which is usually neglected because of insignificance. The normal grinding force F n has influence upon surface deformation and roughness of workpiece, while the tangential grinding force F t mainly affect power consumption and service life of grinding wheel. In order to study deep into the process of the unsteady state grinding, we set up a measurement system to monitor the change of grinding force during the course of grinding and try to find some difference in the change of grinding force between the steady state grinding and unsteady state grinding. In the test, the normal and tangential grinding forces, F n and F t were measured by using a set of equipments including sensor, amplifier, oscilloscope and computer monitor. From the results, we can conclude that: 1) In the unsteady state grinding process, the values of the grinding forces are much lower than those of the steady state grinding process and the grinding force ratio showed a nonlinear fluctuation. 2) The tendency of the grinding forces in the process of the unsteady state grinding proved the existence of the cutting and micro-cutting actions. 3) Because the grinding force signals of the unsteady state grinding are much weaker than those of the steady state grinding, to obtain accurate value of the grinding forces, wave filtering is needed to be done. The whole process to filter the perturbation wave can be separated into three steps in order, changing the grinding force signals from analog signals into digital signals, FFT (fast Fourier transform) treatment to the digital signals, and IFFT(inversion fast Fourier transform) treatment to the digital signals after spectrum limitation.

An Analysis of the Origin of the Interaction Force between Electric Charges, including Justification of the ln<i>r</i>Term in the Completed Coulomb’s Law, in HM16 Ether

In this study, we demonstrate the correctness of our 2010 hypothesis regarding the need to complete Coulomb’s FC law with the term lnr, resulting in the completed FCC force. For this purpose, we consider the electrical interactions between charged microparticles (MPs), which develop as fundamental vibrations (FVs) in ether, producing the vibrational strains &epsilon;and &gamma;and the resulting stresses &sigma;and &tau;, as percussions of ether cells (ECs) upon the MP surface. The stresses &sigma;?and?&tau;produce a resultant force FP, due to the percussions which constitute the real electric force FCC. The spatial effect of ether on FP is demonstrated by an analytical method, considering the electrical interaction between MPs through various equidistant spatial paths li of FVs, modelled on the basis of the Huygens principle for waves. For this issue, we utilized a numerical calculation, which could be generalized. But this spatial effect of the ether leads at a very slow decreasing of the FP forces ratio rF when doubling the distance l, in contrast to Coulomb’s FC forces whose ratio rF?decreases accentuate with doubling l. Accordingly, the necessity of including the term ln r in the FCC force, which is limited to 1.0 for doubling l, at long distances, was justified.

SOUND RADIATION FROM PLATES ON ELASTIC FOUNDATION UNDER ACTION OF MOVING LINE FORCES

An analysis is made of the problem of sound radiation from infinite one-dimensional plateson elastic foundation, when the plates are subjected to the action of harmonic line forces movingat subsonic speeds (M 【 1). The expressions of nondimensional sound power are formulated andthe asymptotic forms of sound power in the low frequency regions are derived. The radiatedsound power is shown as a function of the stiffness of elastic foundation, in terms of stiffness fac-torψ, the moving speed of line force, in terms of Math number M, and the frequency, in termsof wavenumber ratio γ . The effects of the parameter ψ in conjunction with the parameters Mand γ on the radiated sound power level and the phenomenon of coincidence radiation are alsoinvestigated in detail.

"universe collapse model"and its roles in the unification of four fundamental forces and the origin and the evolution of the universe

To unify the four known fundamental forces and provide an explanation for the origin and the evolution of the universe are two long-term goals of theoretical physics. Here a “universe collapse model” has been proposed. The universe consists of Matter and No-matter. No-matter is the universal energy that constructs a consistent universe field, presenting a spiral wave motion at the speed of light at the small scale. The partial collapse of the universal energy forms the particles of the universal energy in a variety of sizes, which are called as the elementary particles. These elementary particles form atom and matter, which construct the galaxies. The collapse of the universe field induces the formation of the universe collapse potential (UCP) and universe collapse force (UCF), and the later is represented by four different aspects of the fundamental forces at the large or small scales. The mathematical equation and the derivation of UCP and UCF are described, and possible experimental tests are also suggested. Therefore, this new model may give a novel explanation for the unification of four fundamental forces and the origin and the evolution of the universe.

Impact of Different Grinding Aids on Standard Deviation in X-Ray Fluorescence Analysis of Cement Raw Meal

X-ray fluorescence (XRF) analysis utilizes particle size which is resulted from milling of a material. The milling ensures uniform and fine grained powder. The finer and more uniform the particle size is, the better the result and easier it is for material quality control. To ensure uniformity in particle size and finer powder, a comparative analysis was conducted with different grinding aids and pressed pellet method was used in obtaining analysis results. Pressed pellets of cement raw meal sample milled with different grinding aids (graphite, aspirin and lithium borate) were subjected to XRF. Graphite produced better particle size uniformity with a corresponding standard deviation that made quality control of raw meal easier and better than aspirin and lithium borate.

Six-Element Yagi Array Designs Using Central Force Optimization with Pseudo Random Negative Gravity

A six-element Yagi-Uda array is optimally designed using Central Force Optimization (CFO) with a small amount of pseudo randomly injected negative gravity. CFO is a simple, deterministic metaheuristic analogizing gravitational kinematics (motion of masses under the influence of gravity). It has been very effective in addressing a wide range of antenna and other problems and normally employs only positive gravity. With positive gravity the six element CFO-designed Yagi array described here exhibits excellent performance with respect to the objectives of impedance bandwidth and forward gain. This paper addresses the question of what happens when a small amount of negative gravity is injected into the CFO algorithm. Does doing so have any effect, beneficial, negative or neutral? In this particular case negative gravity improves CFO’s exploration and creates a region of optimality containing many designs that perform about as well as or better than the array discovered with only positive gravity. Without some negative gravity these array configurations are overlooked. This Yagi-Uda array design example suggests that antennas optimized or designed using deterministic CFO may well benefit by including a small amount of negative gravity, and that the negative gravity approach merits further study.

External grind-hardening experiments and its grinding force

The grind-hardening method suitable for external grinding is proposed in this paper and the experiments are carried out on M1432B grinding machine. The hardened layer of the workpiece with cut depth 0.3 mm and speed 0.2 m/min is analyzed. The result indicates the metallurgical structure of the hardened layer is martensite and the top hardness value is 754 HV （about 62.3 HRC）. At the same time, the grinding force, one of the most important factors of external grind-hardening process is modeled, and the measurement method is provided with elastic core clampers. The measurement result shows that the values of both the tangential force and the normal force increase when the cut depth increases, and the top value is 146 N and 656 N with the cut depth value of 0.4 mm. The increment speed and the value of the normal force are larger than the tangential force.

An Analysis of Specific Categories of Birth Defects and Developmental Disabilities for Children of Participants of the Air Force Health Study

Background: The Air Force Health Study collected reproductive outcomes for live-born children of male Air Force veterans of the Vietnam War. Methods: Dioxin values for participants were obtained from blood samples. Analyses were conducted of occurrence of 16 specific categories of birth defects and developmental disabilities. Children were categorized as conceived before and after the start of participants’ Vietnam War service. Children conceived before the start of Vietnam War service were treated as being conceived when their fathers had unquantifiable dioxin values. Children conceived after the start of Vietnam War service for participants with missing dioxin values were excluded from primary analyses, but were used to assess the impact of their exclusion on conclusions. Correlation between values for specific categories for multiple children fathered by the same participant was accounted for. The dose-response relationship was treated as a step function increasing for dioxin values larger than adaptively identified individual thresholds changing with the specific category. Results: For 15 of 16 specific categories, the probability of occurrence increased substantially for a sufficiently high dioxin level above identified thresholds. Exclusion of children due to missing dioxin likely did not affect these results. Conclusions: Results supported the conclusion of substantial adverse effects on a wide variety of specific categories of birth defects and developmental disabilities due to sufficiently high exposures to dioxin, a toxic contaminant of Agent Orange used for herbicide spraying in the Vietnam War. Results may hold more generally, but might also have been affected by a variety of limitations.