Long Term Application of a Vehicle-Based Health Monitoring System to Short and Medium Span Bridges and Damage Detection Sensitivity

Largest portion of the bridge stock in almost any country and bridge owning organisation consists on ordinary bridges that has short or medium spans and are now deteriorating due to aging, etc. Therefore, it is becoming an important social concern to develop and put to practical use simple and efficient health monitoring systems for existing short and medium span (10 - 30 m) bridges. In this paper, one practical solution to the problem for condition assessment of short and medium span bridges was discussed. A vehicle-based measurement with a public bus as part of a public transit system (called “Bus monitoring system”) has been developed to be capable of detecting damage that may affect the structural safety of a bridge from long term vibration measurement data collected while the vehicle (bus) crossed the target bridges. This paper systematically describes how the system has been developed. The bus monitoring system aims to detect the transition from the damage acceleration period, in which the structural safety of an aged bridge declines sharply, to the deterioration period by continually monitoring the bridge of interest. To evaluate the practicality of the newly developed bus monitoring system, it has been field-tested over a period of about four years by using an in-service fixed-route bus operating on a bus route in the city of Ube, Yamaguchi Prefecture, Japan. The verification results thus obtained are also described in this paper. This study also evaluates the sensitivity of “characteristic deflection”, which is a bridge (health) condition indicator used by the bus monitoring system, in damage detection. Sensitivity of “characteristic deflection” is verified by introducing artificial damage into a bridge that has ended its service life and is awaiting removal. As the results, it will be able to make a rational long-term health monitoring system for existing short and mediumspan bridges, and then the system helps bridge administrators to establish the rational maintenance strategies.

Performance Evaluation of Healthcare Monitoring System over Heterogeneous Wireless Networks

The wide diffusion of healthcare monitoring systems allows continuous patient to be remotely monitored and diagnosed by doctors. The problem of congestion, namely due to the uncontrolled increase of traffic with respect to the network capacity, is one of the most common phenomena affecting the reliability of transmission of information in any network. The aim of the paper is to build a realistic simulation environment for healthcare system including some of the main vital signs model, wireless sensor and mesh network protocols implementation. The simulator environment is an efficient mean to analyze and evaluate in a realistic scenario the healthcare system performance in terms of reliability and efficiency.

Design and Construction of Automatic Monitoring System for Open-pit Coal Mine Slopes

[Objectives]To monitor the stability of open-pit coal mine slopes in real time and ensure the safety of coal mine production.[Methods]The automatic monitoring system of coal mine slope was explored in depth,and the core functions of the system were designed comprehensively.According to the design function of the automatic monitoring system,the slope automatic monitoring system was constructed.Besides,in accordance with the actual situation of the slope,the monitoring frequency of slopes was set scientifically,and the key indicators such as rainfall,deep displacement and surface displacement of the slopes were monitored in an all-round and multi-angle way.[Results]During the monitoring period,the overall condition of the slope remained good,and no landslides or other geological disasters occurred.At the same time,the overall rainfall in the slope area remained low.In terms of monitoring data,the horizontal displacement and settlement of the slopes increased first and then tended to be stable.Specifically,the maximum horizontal displacement during the monitoring period was 22.74 mm,while the maximum settlement was 18.65 mm.[Conclusions]The automatic slope monitoring system has obtained remarkable achievements in practical application.It not only improves the accuracy and efficiency of slope stability monitoring,but also provides valuable reference experience for similar projects.

Heart Disease Detection by Using Machine Learning Algorithms and a Real-Time Cardiovascular Health Monitoring System

Cardiovascular diseases are the most common cause of death worldwide over the last few decades in the developed as well as underdeveloped and developing countries. Early detection of cardiac diseases and continuous supervision of clinicians can reduce the mortality rate. However, accurate detection of heart diseases in all cases and consultation of a patient for 24 hours by a doctor is not available since it requires more sapience, time and expertise. In this?study, a tentative design of a cloud-based heart disease prediction system had been proposed to detect impending heart disease using Machine learning techniques. For the accurate detection of the heart disease, an efficient machine learning technique should be used which had been derived from a distinctive analysis among several machine learning algorithms in a Java Based Open Access Data Mining Platform, WEKA. The proposed algorithm was validated using two widely used open-access database, where 10-fold cross-validation is applied in order to analyze the performance of heart disease detection. An accuracy level of 97.53% accuracy was found from the SVM algorithm along with sensitivity and specificity of 97.50% and 94.94%respectively. Moreover, to monitor the heart disease patient round-the-clock by his/her caretaker/doctor, a real-time patient monitoring system was developed and presented using Arduino, capable of sensing some real-time parameters such as body temperature, blood pressure, humidity, heartbeat. The developed system can transmit the recorded data to a central server which are updated every 10 seconds. As a result, the doctors can visualize the patient’s real-time sensor data by using the application and start live video streaming if instant medication is required. Another important feature of the proposed system was that as soon as any real-time parameter of the patient exceeds the threshold, the prescribed doctor is notified at once through GSM technology.

IoT-Enabled Plant Monitoring System with Power Optimization and Secure Authentication

Global food security is a pressing issue that affects the stability and well-being of communities worldwide.While existing Internet of Things(IoT)enabled plant monitoring systems have made significant strides in agricultural monitoring,they often face limitations such as high power consumption,restricted mobility,complex deployment requirements,and inadequate security measures for data access.This paper introduces an enhanced IoT application for agricultural monitoring systems that address these critical shortcomings.Our system strategically combines power efficiency,portability,and secure access capabilities,assisting farmers in monitoring and tracking crop environmental conditions.The proposed system includes a remote camera that captures images of surrounding plants and a sensor module that regularly monitors various environmental factors,including temperature,humidity,and soil moisture.We implement power management strategies to minimize energy consumption compared to existing solutions.Unlike conventional systems,our implementation utilizes the Amazon Web Services(AWS)cloud platform for reliable data storage and processing while incorporating comprehensive security measures,including Two-Factor Authentication(2FA)and JSON Web Tokens(JWT),features often overlooked in current agricultural IoT solutions.Users can access this secure monitoring system via a developed Android application,providing convenient mobile access to the gathered plant data.We validate our system’s advantages by implementing it with two potted garlic plants on Okayama University’s rooftop.Our evaluation demonstrates high sensor reliabil-ity,with strong correlations between sensor readings and reference data,achieving determination coefficients(R2)of 0.979 for temperature and 0.750 for humidity measurements.The implemented power management strategies extend battery life to 10 days on a single charge,significantly outperforming existing systems that typically require daily recharging.Furthermore,our dual-layer security implementation utilizing 2FA and JWT successfully protects sensitive agricultural data from unauthorized access.

Advances in fibre optic based geotechnical monitoring systems for underground excavations

Geotechnical stability is a major concern for the long-term safety and integrity of underground infrastructures such as tunnels, railway stations, mine shafts and hydraulic power chambers. An effective geotechnical monitoring system is able to provide adequate warning to underground personnel prior to any unexpected major geotechnical failure. This paper reviews the conventional geotechnical monitoring sensors and the emerging Fibre Optic Sensing(FOS) techniques, pointing out their unique features and major differences. Recent advances in various FOS based monitoring systems, including Brillouin time domain distributed optical sensors and fibre Bragg grating(FBG) sensors, are investigated through a critical review of the laboratory studies and field applications used for underground geotechnical monitoring. Particular emphasis is given to fibre packaging, temperature compensation, installation methods and instrumentation performance in the underground environment. A detailed discussion of the advantages and limitations of each FOS monitoring system is also presented in this paper.

Development of OIST Wave Energy Converter Monitoring System for Maldives Island Experiment

This paper describes experiments with our self-built Wave Energy Convertor(WEC)monitoring system in the Maldives and demonstrates how we developed a horizontal-axis type,half-scale,wave energy converter(WEC)that generates electricity in the coastal breaking wave zone.In order to measure this power generator and turbine’s efficiency,voltage and current were measured by pulling the generator with a 35 cm diameter turbine(half scale).We obtained data showing 400 W peak power in water speed of 3.1 m/s.Consequently,we assembled two sets of WEC,placed them near the shoreline on Kandooma Island in the Maldives in May 2018,and measured the wave energy at the breaking wave zone.A monitoring system was set up in one rack for the two sets of WECs,connected simultaneously.Two outputs of the generators were rectified and connected to power resistors and internal LED displays.The outputs could also be switched to connect to 24 electric double layer capacitors(EDLC),in order to perform a continuous lighting test of external high-power LED lights.The wave power data were continuously saved by an automated data logger and could be transferred from the installation site,to Japan via the Internet.The wave power was measured on Kandooma Island in the Maldives for a long period,and is still ongoing.Examples of the obtained data are shown in this paper.

Analysis of Ornidazole Injection in Clinical Use at Post-marketing Stage by Centralized Hospital Monitoring System

This study aims to analyze the clinical use of ornidazole injection at the post-marketing stage by centralized hospital monitoring system method,and investigate its widespread use in patients,in order to regulate and guide the rational drug use,improve the drug specificity and provide a basis for drug therapy.The study adopts a prospective,multi-center,large sample size,centralized hospital monitoring system.We selected five leading hospitals in Hubei province,and observed the inpatients who received the ornidazole injection from July 1,2015 to October 31,2015.The basic information of patients was recorded,as well as the drug use and adverse events.The statistical analysis was performed based on these data.A total of 4396 individuals were enrolled in this study,most of them were middle-aged female patients and the ornidazole injection was mainly used as prophylactic prior to surgery to prevent the infections,and surgical treatment of anaerobic infections,abdominal infections and pelvic infections.The irrational drug use existed mainly in the prescribing and administration process,including unreasonable dosing frequency,rapid intravenous drip speed and extended duration of drug use.Eleven cases of adverse reactions were collected during the monitoring,incidence rate of adverse reactions was 2.5‰;adverse drug reactions occurred within 30 min.The study results fully reflected the usage of ornidazole injection in the real world.Based on the study,we calculated the adverse reaction incidence of ornidazole and identified the risk factors which may affect the safety of ornidazole injection.Study results strongly recommend that the manufacturers should publish standards for inpatient use and doctors should prescribe with caution accordingly.

Design and application of structural health monitoring system in long-span cable-membrane structure

Cable-membrane structures have small rigidity and are highly sensitive to wind. Structural health monitoring is necessary to ensure the serviceability and safety of the structure. In this research, the design method of a structural health monitoring system is using the characteristics of a cable-membrane structure. Taking the Yueyang Sanhe Airport Terminal as an example, a finite element model is established to determine the critical structural components. Next, the engineering requirements and the framework of the monitoring system are studied based on the results of numerical analysis. The specific implementation of the structural health monitoring is then carried out, which includes sensor selection, installation and wiring. The proposed framework is successfully applied to the monitoring system for the Yueyang Airport terminal building, and the synchronous acquisition of fiber Bragg grating and acceleration sensor signals is implemented in an innovative way. The successful implementation and operation of structural health monitoring will help to guarantee the safety of the cablemembrane structure during its service life.

Design of Power Supply for On-line Monitoring System of Transmission Lines

This paper uses CT to gain the energy directly from the high-voltage transmission line, to address the problem of power supply for monitoring system in high voltage side of transmission line. The draw-out power coil can induce voltage from the transmission line, using single-chip microcomputer to analog and output PMW wave to control the charging module, provides a stable 3.4 V DC voltage to the load, and solve the problem of easy saturating of core. The power supply based on this kind of draw-out power coil has undergone the overall testing, and it is verified-showing that it can properly work in a non-saturated status within the current range of 50 - 1000 A, and provide a stable output. The equipment also design protection circuit to improve the reliability to avid the impacts of the impulse current or short-circuit current. It effectively solves the problem of power supply for On-line Monitoring System of Transmission.

A Non-Asymptotic Confidence Region with a Fixed Size for a Scalar Function Value: Applications in C-OTDR Monitoring Systems

In this paper we will investigate some non-asymptotic properties of the modified least squares estimates for the non-linear function f(λ*) by observations that nonlinearly depend on the parameter λ*. Non-asymptotic confidence regions with fixed sizes for the modified least squares estimate are used. The obtained confidence region is valid for a finite number of data points when the distributions of the observations are unknown. Asymptotically the suggested estimates represent usual estimates of the least squares. The paper presents the results of practical applications of the proposed method in C-OTDR monitoring systems.

Advancement in Wide Area Monitoring Protection and Control Using PMU’s Model in MATLAB/SIMULINK

A big step forward to improve power system monitoring and performance, continued load growth without a corresponding increase in transmission resources has resulted in reduced operational margins for many power systems worldwide and has led to operation of power systems closer to their stability limits and to power exchange in new patterns. These issues, as well as the on-going worldwide trend towards deregulation of the entire industry on the one hand and the increased need for accurate and better network monitoring on the other hand, force power utilities exposed to this pressure to demand new solutions for wide area monitoring, protection and control. Wide-area monitoring, protection, and control require communicating the specific-node information to a remote station but all information should be time synchronized so that to neutralize the time difference between information. It gives a complete simultaneous snap shot of the power system. The conventional system is not able to satisfy the time-synchronized requirement of power system. Phasor Measurement Unit (PMU) is enabler of time-synchronized measurement, it communicate the synchronized local information to remote station.

Internet of Things for in Home Health Based Monitoring System:Modern Advances,Challenges and Future Directions

IOT has carried outimportant function in converting the traditional fitness care corporation.With developing call for in population,traditional healthcare structures have reached their outmost functionality in presenting sufficient and as plenty as mark offerings.The worldwide is handling devastating developingantique population disaster and the right want for assisted-dwelling environments is turning into inevitable for senior citizens.There furthermore a determination by means of the use of way of countrywide healthcare organizations to increase crucial manual for individualized,right blanketed care to prevent and manipulate excessive coronial situations.Many tech orientated packages related to HealthMonitoring have been delivered these days as taking advantage of net boom everywhere on globe,manner to improvements in cellular and in IOT generation.Such as optimized indoor networks insurance,community shape,and fairly-lowdevice fee performances,advanced tool reliability,low device energy consumption,and hundreds higher unusual common usual performance in network safety and privacy.Studies have highlighted fantastic advantages of integrating IOT with health care location and as era is improving the rate also cannot be that terrific of a problem.However,many challenges in this new paradigm shift notwithstanding the fact that exist,that need to be addressed.So the out most purpose of this research paper is 3 essential departments:First,evaluation of key elements that drove the adoption and boom of the Internet of factors based totally domestic some distance off monitoring;Second,present fashionable improvement of IOT in home a long manner off monitoring shape and key building gadgets;Third,communicate future very last effects and distinct guidelines of such type a long way off monitoring packages going ahead.Such Research is a wonderful manner in advance now not outstanding in IOT Terminology but in standard fitness care location.

A RESEARCH ON THE DYNAMIC MONITORING SYSTEM FOR FORAGE-LIVESTOCK BALANCE IN THE TEMPERATE CRASSLAND OF CHINA

Some principles and methods for the dynamic monitoring of forage-livestock bal-ance in the grazing system on the temperate grassland of China were discussed in thispaper. To prepare a dynamic monitoring system or the forage livestock balance of grazingrangeland system, the following theoretical bases will be observed in this work.

An On-line Monitoring System for Partial Dischargefrom High Voltage Transformer

An on-line monitoring system for partial discharge from high voltage transformer is presented with structure of hardware and principle of software discussed and a new effective method combining DFT with DWT is proposed to get rid of both sinusoidal continuous noise and other external discharges.

Noninvasive Blood Glucose Monitoring System Based on Distributed Multi-Sensors Information Fusion of Multi-Wavelength NIR

In this research, a near infrared multi-wavelength noninvasive blood glucose monitoring system with distributed laser multi-sensors is applied to monitor human blood glucose concentration. In order to improve the monitoring accuracy, a multi-sensors information fusion model based on Back Propagation Artificial Neural Network is proposed. The Root- Mean-Square Error of Prediction for noninvasive blood glucose measurement is 0.088mmol/L, and the correlation coefficient is 0.94. The noninvasive blood glucose monitoring system based on distributed multi-sensors information fusion of multi-wavelength NIR is proved to be of great efficient. And the new proposed idea of measurement based on distri- buted multi-sensors, shows better prediction accuracy.

System Reliability Analysis of Redundant Condition Monitoring Systems

The development and application of new reliability models and methods are presented to analyze the system relia- bility of complex condition monitoring systems.The methods include a method analyzing failure modes of a type of redundant con- dition monitoring systems (RCMS) by invoking failure tree model,Markov modeling techniques for analyzing system reliability of RCMS,and methods for estimating Markov model parameters.Furthermore,a computing case is investigated and many conclu- sions upon this case are summarized.Results show that the method proposed here is practical and valuable for designing condition monitoring systems and their maintenance.

Influence Analysis on the Floating Underwater Monitoring System Applicable for Very-Low-Frequency Acoustic Measurement

Ocean vector acoustic measurement is feasible affected by the hydrodynamic interference caused by the flow fluctuations and structural vibrations, especially in the very-low-frequency monitoring. Hence, a novel horizontal floating platform including a horizontal floating cable, vertical mooring cable and floating main body is proposed and described in this paper. It has the advantages of good maneuverability along with the current and multi-stage vibration isolation. The main application of this platform is to measure the ocean ambient noise coming from the wave fluctuation and the deterministic acoustic signals such as aquatic organisms, underwater targets and sailing vehicles. The influence of the current fluctuation on the attitude angle and flow induced vibration of cables and main body are analyzed with some previous sea test data. Moreover, the comparison between the vertical type platform used before and the horizontal type platform is also discussed. It is concluded that there is obvious relevance between the attitude angle and ocean current variation. Meanwhile, the abnormal influence on the main body is caused by the vibration transmission from the fluctuation of cables. There will be the influence on the accuracy of the acoustic measurement above 100 Hz, and the inherent vibration characteristic of the main body is the primary reason.

Smart Street Lighting Control and Monitoring System for Electrical Power Saving by Using VANET

The huge amount of electrical power of many countries is consumed in lighting the streets. However, vehicles pass with very low rate in specific periods of time and parts of the streets are not occupied by vehicles over time. In this paper, we propose a system that automatically switches off the light for the parts of the streets having no vehicles and turns on the light for these parts once there are some vehicles that are going to come. Logically, this system may save a large amount of the electrical power. In addition, it may increase the lifetime of the lamps and reduce the pollutions. This system automatically controls and monitors the light of the streets. It can light only the parts that have vehicles and help on the maintenance of the lighting equipments. Vehicular Ad-Hoc Networks (VANET) make it possible to propose such system. VANET enables the possibility to know the presence of vehicles, their locations, their directions and their speeds in real time. These quantities are what are needed to develop this system. An advantage of using VANET is that there is no need to use specific network and equipments to design the system, but VANET infrastructure will be used. This decreases the cost and speed up the deployment of such system. This paper focuses on the proposal of different possible architectures of this system. Results show that the saved energy may reach up to 65% and an increase of the lifetime of the lamps of 53%.

Early faults prediction of running state of electromechanical systems and reconfigurable integration of series safety monitoring systems

Fault prediction technology of running state of electromechanical systems is one of the key technologies that ensure safe and reliable operation of electromechanical equipment in health state. For multiple types of modern, high-end and key electromechanical equipment, this paper will describe the early faults prediction method for multi-type electromechanical systems, which is favorable for predicting early faults of complex electromechanical systems in non-stationary, nonlinear, variable working conditions and long-time running state; the paper shall introduce the reconfigurable integration technology of series safety monitoring systems based on which the integrated development platform of series safety monitoring systems is built. This platform can adapt to integrated R&D of series safety monitoring systems characterized by high technology, multiple species and low volume. With the help of this platform, series safety monitoring systems were developed, and the Remote Network Security Monitoring Center for Facility Groups was built. Experimental research and engineering applications show that: this new fault prediction method has realized the development trend features extraction of typical electromechanical systems, multi-information fusion, intelligent information decision-making and so on, improving the processing accuracy, relevance and applicability of information; new reconfigurable integration technologies have improved the integration level and R&D efficiency of series safety monitoring systems as well as expanded the scope of application; the series safety monitoring systems developed based on reconfigurable integration platform has already played an important role in many aspects including ensuring safety operation of equipment, stabilizing product quality, optimizing running state, saving energy consumption, reducing environmental pollution, improving working conditions, carrying out scientific maintenance, advancing equipment utilization, saving maintenance charge and enhancing the level of information management.