Technical Note and Brief Overview of the Materials Science and Technology along with Designing Aspects for Development of Spintronic Devices with Optimum Efficiency

One of the major challenges in designing and fabricating Spintronic devices is the choice of both, Materials and the Technology, along with understanding the intricacies of the Designing aspects. In this communication, we have attempted to briefly discuss these factors, with an aim to draw the attention of the Materials Scientists and Technologists to this serious challenge, in the direction of which, though a lot of research and development work has been done, still needs more concerted efforts to be made in order to make the Spintronic devices that can offer good efficiency for maximizing their usefulness.

Cross-layer design of combining AMC with HARQ in cooperative relay system with perfect and imperfect CSI

A cross-layer design which combines adaptive modulation and coding (AMC) at the physical layer with a hybrid automatic repeat request (HARQ) protocol at the data link layer (LL) is presented, in cooperative relay system over Nakagami-m fading channels with perfect and imperfect channel state information (CSI). In order to maximize spectral efficiency (SE) under delay and packet error rate (PER) performance constraints, a state transition model and an optimization framework with perfect CSI are presented. Then the framework is extended to cooperative relay system with imperfect CSI. The numerical results show that the scheme can achieve maximum SE while satisfying transmitting delay requirements. Compared with the imperfect CSI, the average PER with perfect CSI is much lower and the spectral efficiency is much higher.

Novel nervous and multi-system regenerative therapeutic strategies for diabetes mellitus with mTOR

Throughout the globe,diabetes mellitus（DM） is increasing in incidence with limited therapies presently available to prevent or resolve the significant complications of this disorder.DM impacts multiple organs and affects all components of the central and peripheral nervous systems that can range from dementia to diabetic neuropathy.The mechanistic target of rapamycin（m TOR） is a promising agent for the development of novel regenerative strategies for the treatment of DM.m TOR and its related signaling pathways impact multiple metabolic parameters that include cellular metabolic homeostasis,insulin resistance,insulin secretion,stem cell proliferation and differentiation,pancreatic β-cell function,and programmed cell death with apoptosis and autophagy.m TOR is central element for the protein complexes m TOR Complex 1（m TORC1） and m TOR Complex 2（m TORC2） and is a critical component for a number of signaling pathways that involve phosphoinositide 3-kinase（PI 3-K）,protein kinase B（Akt）,AMP activated protein kinase（AMPK）,silent mating type information regulation 2 homolog 1（Saccharomyces cerevisiae）（SIRT1）,Wnt1 inducible signaling pathway protein 1（WISP1）,and growth factors.As a result,m TOR represents an exciting target to offer new clinical avenues for the treatment of DM and the complications of this disease.Future studies directed to elucidate the delicate balance m TOR holds over cellular metabolism and the impact of its broad signaling pathways should foster the translation of these targets into effective clinical regimens for DM.

IUID Method-Mix: Towards a Systematic Approach for Intercultural User Interface Design (IUID)

A method-mix for intercultural user interface design (IUID) is explained and exemplified by application examples based on a hybrid approach covering cultural contexts in human-computer interaction (HCI) design using a model of culturally influenced HCI. Cultural influence on HCI is described using cultural variables for user interface design. Assumptions and empirical results regarding the influence of culture on HCI, considering the path of the information processing and the interaction style between Chinese and German users are explained based on cultural models. Subsequent indicators represent the relationship between culture and HCI (culturally imprinted by the user). Correlations adopted theoretically between cultural dimensions and variables for HCI design were investigated. These correlations represent relevant constituents of a model for culturally influenced HCI. Considerations applying this model and evidence for the proper application of the IUID method-mix are presented elucidating why and how cultural aspects play a role in HCI design and usability/UX engineering. The IUID method-mix serves to inspire HCI engineers in the requirement analysis phase as well as HCI designers in the design phase. The readers are thereby sensitized to the challenges of intercultural usability/UX engineering and intercultural HCI design and will be equipped with methodological knowledge relevant to the derivation of design recommendations for user interface design for and in their desired cultural contexts. Finally, implications for practitioners are shown, including HCI style scores and practical design recommendations, to prognosticate the effort and the expenditures for considering the cultural context in IUID.

Key technologies and practice for gas field storage facility construction of complex geological conditions in China

In view of complex geological characteristics and alternating loading conditions associated with cyclic large amount of gas injection and withdrawal in underground gas storage(UGS) of China, a series of key gas storage construction technologies were established, mainly including UGS site selection and evaluation, key index design, well drilling and completion, surface engineering and operational risk warning and assessment, etc. The effect of field application was discussed and summarized. Firstly, trap dynamic sealing capacity evaluation technology for conversion of UGS from the fault depleted or partially depleted gas reservoirs. A key index design method mainly based on the effective gas storage capacity design for water flooded heterogeneous gas reservoirs was proposed. To effectively guide the engineering construction of UGS, the safe well drilling, high quality cementing and high pressure and large flow surface injection and production engineering optimization suitable for long-term alternate loading condition and ultra-deep and ultra-low temperature formation were developed. The core surface equipment like high pressure gas injection compressor can be manufactured by our own. Last, the full-system operational risk warning and assessment technology for UGS was set up. The above 5 key technologies have been utilized in site selection, development scheme design, engineering construction and annual operations of 6 UGS groups, e.g. the Hutubi UGS in Xinjiang. To date, designed main indexes are highly consistent with actural performance, the 6 UGS groups have the load capacity of over 7.5 billion cubic meters of working gas volume and all the storage facilities have been running efficiently and safely.

Improving Bandwidth of Yagi-Uda Arrays

A novel approach for improving antenna bandwidth is described using a 6-element Yagi-Uda array as an example. The new approach applies Central Force Optimization, a deterministic metaheuristic, and Variable Z0 technology, a novel, proprietary design and optimization methodology, to produce an array with 33.09% fractional impedance bandwidth. This array’s performance is compared to its CFO-optimized Fixed Z0counterpart, and to the performance of a 6-ele- ment Dominating Cone Line Search-optimized array. Both CFO-optimized antennas exhibit better performance than the DCLS array, especially with respect to impedance bandwidth. Although the Yagi-Uda antenna was chosen to illustrate this new approach to antenna design and optimization, the methodology is entirely general and can be applied to any antenna against any set of performance objectives.

Effect of the Design Parameters on the Performance of Inner-Recycling Continuous Sand Filter

A novel integrated water treatment facility, inner-recycling continuous sand filter, is discussed. The theory of micro-flocculation is applied in the sand-washing circulation system with continuous filtration and backwashing. The design and operation parameters, which affect the performance of the filter, are discussed. The key design parameters are provided as follows: diameter of filter material is 0.7 to 1.0 mm, depth of filter bed is 0.6 m, filtration velocity is less than 12 m/h, ratio of gas to water is 9:11 and sand recycling rate is 2 to 4 mm/min.

PRACTICE AND KNOWLEDGE ABOUT RECONSTRUCTION DESIGN OF TRADITIONAL BUILDINGS AND GARDENS

In this paper,the author sums up some essential knowledge from the practiceabout rebuilding traditional buildings and gardens in which the author has been engagedrecently.The view points are that one should discard the dross and select the essential,re-tain the symbolic form,grasp the overall style,embody local characteristics and space outthe distance of time and space between the new and old buildings.Finally,the author con-siders that the traditional form of buildings should not be used indiscriminately at allplaces in modern times.

Intelligent Agent Based Mapping of Software Requirement Specification to Design Model

Automatically mapping a requirement specification to design model in Software Engineering is an open complex problem. Existing methods use a complex manual process that use the knowledge from the requirement specification/modeling and the design, and try to find a good match between them. The key task done by designers is to convert a natural language based requirement specification (or corresponding UML based representation) into a predominantly computer language based design model—thus the process is very complex as there is a very large gap between our natural language and computer language. Moreover, this is not just a simple language conversion, but rather a complex knowledge conversion that can lead to meaningful design implementation. In this paper, we describe an automated method to map Requirement Model to Design Model and thus automate/partially automate the Structured Design (SD) process. We believe, this is the first logical step in mapping a more complex requirement specification to design model. We call it IRTDM (Intelligent Agent based requirement model to design model mapping). The main theme of IRTDM is to use some AI (Artificial Intelligence) based algorithms, semantic representation using Ontology or Predicate Logic, design structures using some well known design framework and Machine Learning algorithms for learning over time. Semantics help convert natural language based requirement specification (and associated UML representation) into high level design model followed by mapping to design structures. AI method can also be used to convert high level design structures into lower level design which then can be refined further by some manual and/or semi automated process. We emphasize that automation is one of the key ways to minimize the software cost, and is very important for all, especially, for the “Design for the Bottom 90% People” or BOP (Base of the Pyramid People).

Six-Element Yagi Array Designs Using Central Force Optimization with Pseudo Random Negative Gravity

A six-element Yagi-Uda array is optimally designed using Central Force Optimization (CFO) with a small amount of pseudo randomly injected negative gravity. CFO is a simple, deterministic metaheuristic analogizing gravitational kinematics (motion of masses under the influence of gravity). It has been very effective in addressing a wide range of antenna and other problems and normally employs only positive gravity. With positive gravity the six element CFO-designed Yagi array described here exhibits excellent performance with respect to the objectives of impedance bandwidth and forward gain. This paper addresses the question of what happens when a small amount of negative gravity is injected into the CFO algorithm. Does doing so have any effect, beneficial, negative or neutral? In this particular case negative gravity improves CFO’s exploration and creates a region of optimality containing many designs that perform about as well as or better than the array discovered with only positive gravity. Without some negative gravity these array configurations are overlooked. This Yagi-Uda array design example suggests that antennas optimized or designed using deterministic CFO may well benefit by including a small amount of negative gravity, and that the negative gravity approach merits further study.

Creation of "Regional Characteristic" in Planning and Design of Farmers' Residential Area at the South of Lower Reaches of the Yangtze River

After analysis of location feature of the south of lower reaches of Yangtze River and its construction of urban and rural integration,the paper pointed out harmonious combination between natural and artificial factors had been neglected in planning and design of farmers' residential area at the south of lower reaches of Yangtze River,"regional characteristic" losing,residential area in the form of "city community" and buildings in European style.In view of these problems,relevant planning and design thoughts and methods had been proposed as to how to create "regional characteristic" from the perspective of planning,architecture and landscape design.It discussed with emphasis the importance of construction base type and combination of environment with residential area construction;inspirations and design methods obtained from traditional architectures;and the content of landscape overall planning and specific design.It was hoped to enlighten designers to shoulder social and historical responsibility,make exploration unremittingly,and construct beautiful homelands for people.

MoM Analysis and Design of a Compact Coaxial-to-Microstrip Directional Coupler

In order to overcome the main drawbacks of coaxial, waveguide, and stripline couplers, the analysis and the design of a compact coaxial-to-microstrip directional coupler convenient for power and antenna control application, are presented using the method of moments (MoM) in two dimensions. This technique is adapted to study the complex configuration of the line’s system, which does not have a simple analytical solution. The modeling of this structure consists in analyzing the primary inductive and capacitive matrices ([L] and [C]). When these matrices are determined, it is possible to calculate the inductive and capacitive coupling coefficients (kL and kC) and estimate the resulting scattering parameters of the coupler using an adapted numerical model. The coupler can be integrated into a printed circuit board (PCB) and operates over 17 to 35 dB coupling coefficients and is always compensated. The compensation is achieved by the proper displacement of a tuning ground plane with respect to the edge of the PCB from 0.1 to 3.3 mm. As an application, we present the design of a compact coupler with 7.5 × 4.8 × 25.8 mm of size and having approximately 20 dB of coupling coefficient at 2 GHz and a minimum directivity of 23.3 dB in the frequency range [0.1 - 4] GHz. In order to check our numerical calculations by the MoM we made simulations in 3D by using CST MICROWAVE STUDIO software for the same geometrical and physical parameters of our designed coupler. The results obtained by the two numerical models (MoM and CST) show a good agreement of the frequency responses of the coaxial-to-microstrip directional coupler. The studied structure represents a great improvement for high power measurement systems, since it has broad-band, good directivity, and can be easily designed and fabricated.

Methanol Distillation System: Process Analysis and Column Design

Base on industrial research and experience, the process of methanol distillation is analyzed,and above all, a new concept of high pressure flowsheet and low pressure flowsheet is defined. The new configuration helps to handle problems encountered in many factories in China. The inter influence between process and column internal pattern is also pointed out. Recommendation of new column internal designs is given. Finally, industrial examples tell the how the new concept works and the possibility of combining process to give more opens to solve engineering problems.

Recent Progress in Reinforcement Learning and Adaptive Dynamic Programming for Advanced Control Applications

Reinforcement learning(RL) has roots in dynamic programming and it is called adaptive/approximate dynamic programming(ADP) within the control community. This paper reviews recent developments in ADP along with RL and its applications to various advanced control fields. First, the background of the development of ADP is described, emphasizing the significance of regulation and tracking control problems. Some effective offline and online algorithms for ADP/adaptive critic control are displayed, where the main results towards discrete-time systems and continuous-time systems are surveyed, respectively.Then, the research progress on adaptive critic control based on the event-triggered framework and under uncertain environment is discussed, respectively, where event-based design, robust stabilization, and game design are reviewed. Moreover, the extensions of ADP for addressing control problems under complex environment attract enormous attention. The ADP architecture is revisited under the perspective of data-driven and RL frameworks,showing how they promote ADP formulation significantly.Finally, several typical control applications with respect to RL and ADP are summarized, particularly in the fields of wastewater treatment processes and power systems, followed by some general prospects for future research. Overall, the comprehensive survey on ADP and RL for advanced control applications has d emonstrated its remarkable potential within the artificial intelligence era. In addition, it also plays a vital role in promoting environmental protection and industrial intelligence.

Design and Experimental Research on Seedling Pick-Up Mechanism of Planetary Gear Train with Combined Non-circular Gear Transmission

Currently, transplanting mechanisms for dryland plug seedlings in China are mainly semiautomatic and have low efficiency. The rotary seedling pick-up mechanism with a planetary gear train for non-uniform intermittent transmission, and a concave and convex locking arc device, has a large rigid impact. To solve these problems, according to the design requirements for a dryland plug seedling transplanting mechanism, a rotary seedling pick-up mechanism of a planetary gear train with combined non-circular gear transmission of incomplete eccentric circular and noncircular gears was proposed. This has the characteristics of two-times greater fluctuation of the transmission ratio in a cycle, and can achieve a non-uniform continuous drive. Through analysis of the working principle of the seedling pick-up mechanism, its kinematics model was established. The human–computer interaction optimization method and self-developed computer-aided analysis and optimization software were used to obtain a set of parameters that satisfy the operation requirements of the seedling pick-up mechanism. According to the optimized parameters, the structure of the seedling pick-up mechanism was designed, a virtual prototype of the mechanism was created, and a physical prototype was manufactured. A virtual motion simulation of the mechanism was performed, high-speed photographic kinematics tests were conducted, and the kinematic properties of the physical prototype were investigated, whereby the correctness of the theoretical model and the optimized design of the mechanism were verified. Further, laboratory seedling pick-up tests were conducted. The success ratio of seedling pick-up was 93.8% when the seedling pick-up efficiency of the mechanism was 60 plants per minute per row, indicating that the mechanism has a high efficiency and success ratio for seedling pick-up and can be applied to a dryland plug seedling transplanter.

AN INVERSE DESIGN OF ELECTROSTATIC FOCUSING FIELD FOR ELECTROSTATIC AND MAGNETIC IMAGING

An inverse design of electrostatic focusing field for electrostatic and magneticimaging is investigated.Using the potential superimposition theorem of electrostatic field inmulti-electrode system,a mathematical model has been developed and an optimization methodhas been introduced into computation for designing the electrostatic focusing field of the imagingsystem.

Improved Conditions for the Existence and Uniqueness of Solutions to the General Equality Constrained Quadratic Programming Problem

This paper presents an approach that directly utilizes the Hessian matrix to investigate the existence and uniqueness of global solutions for the ECQP problem. The novel features of this proposed algorithm are its uniqueness and faster rate of convergence to the solution. The merit of this algorithm is base on cost, accuracy and number of operations.

Design and Operation of the Printing and Dyeing Wastewater Treatment Project by Combination of Coagulation Sedimentation - Hydrolytic Acidification with Aeration Tank - Biological Aerated Filter - Active Sand Filter

In order to protect quality of Baiyangdian surface water and Gaoyang groundwater,the project is applied to process printing and dyeing wastewater that contains complicated compositions,high concentrations of organics and SS,and lots of pollutants difficult to degrade by microorganism. The process and operating parameters of project are optimized and debugged,and its economic and environmental benefits are analyzed.The results show that the process of coagulation sedimentation-hydrolytic acidification with aeration tank-biological aerated filter-active sand filter is applied in Gaoyang Sewage Treatment Plant. The design scale of sewage treatment plant is 120000 m^3/d. The influent is as following: COD is 669mg/L; SS is 424mg/L; NH_3-N is 8.83mg/L; TP is 6.03mg/L. After the process,the best removal rates of COD,SS,NH_3-N and TP are 93. 5%,98. 8%,97. 1% and 96. 2%,respectively. The various indexes of effluent water complied with standard A of the first order in Pollutants Emission Standard of Urban Wastewater Treatment Plant( GB 18918-2002). The processing cost is only 0. 807 yuan/m^3. As a result,the project construction and operation not only improve the environment,but also promote regional economic development. Process design and operating parameters provide an important reference value for the printing and dyeing wastewater treatment industry.

Typhoon/Hurricane/Tropical Cyclone Disasters: Prediction, Prevention and Mitigation

Since 1972 Rita typhoon attacked on Dalian Port and induced severe catastrophe, we were studied on statistical prediction model of typhoon induced wave height and wind speed. With an increasing tendency of the natural hazards frequency and intensity, risk assessment of some design codes for coastal defence infrastructures should be of paramount importance influencing the economic development and a lot of lifes in China. Comparison between existing extreme statistical model like Gumbel, Weibull, P-III distribution or Probable Maximum Typhoon/Hurricane (PMT/PMH), Design Basis Flood (DBF) with our 1975-1980 proposed (CEVD) model showed that all the planned, designed and constructed coastal infrastructures accepted the traditional safety regulations are menaced by possibility of future ty-phoon/hurricane disasters and cannot satisfy the safety requirements with the increasing tendency of the extreme natural hazards. Our first publication in US (J. of Waterway Port Coastal & Ocean Eng. ASCE, 1980, ww4) proposed an new model “Compound Extreme Value Distribution” used for China sea, after then the model was used in “Long term Distribution of Hurricane Characteristics” for Gulf of Mexico & Atlantic coasts, U.S. (OTC.1982). 2005 hurricane Katrina, Rita and 2012 hurricane Sandy induced disasters proved 1982 CEVD and CEVD has been developed into Multivariate Compound Extreme Value Distribution (MCEVD). 2006 MCEVD predicted extreme hazards in New Orleans, Gulf of Mexico and Philadelphia areas. 2013 typhoon Fitow induced disaster in China also proved MCEVD 2006 predicted results.

Study on Planning and Design Mode of Eco-agricultural Demonstration Base in Poyang Lake Eco-economic Zone

Guided by the Planning of Poyang Lake Eco-economic Zone, traffic and geographic conditions of the Eco-agricultural Demonstration Base in the study area were analyzed, and design principles proposed as "adaptation to local conditions, scientific planning, benign circulation and sustainable development". Detailed planning and design was interpreted from the perspectives of infrastructure planning and functional area planning. Specifically, infrastructure construction should focus on traffic design, water, power and gas supply design, and also architectural design; while functional areas should be gradually developed from south section to central and then north section. It was to establish a design and planning mode that can be widely applied.