气象观测场在汽车试验场中的应用研究

汽车试验场作为汽车开展道路测试的重要场所,用于验证汽车产品的品质以及可靠性。除了场地道路外,气象条件作为汽车道路测试的重要一环,在《GB/T12534-1990汽车道路试验方法通则》中也有明确要求,如:试验时应是无雨无雾天气,相对湿度小于95%,气温0-40℃,风速不大于3m/s。同时气象条件也作为试验场道路管控的重要依据,实时风速、雨量、能见度等信息为场地管理者发布限速、限行、封场等通知提供必要参考依据,直接影响道路测试安全管控的及时性。因此,文章从气象观测场的建设、气象服务、异常天气道路管控等方面开展气象观测场在汽车试验场中的应用研究。

Numerical study on magneto-Rayleigh–Taylor instabilities for thin liner implosions on the primary test stand facility

The thin aluminum liners with an aspect ratio R/?r 1 have been imploded on the primary test stand(PTS) facility,where R is the outer radius of the liner and ?r is the thickness. The x-ray self-emission images present azimuthally correlated perturbations in the liner implosions. The experiments show that at-10 ns before the stagnation, the wavelengths of perturbation are about 0.93 mm and 1.67 mm for the small-radius and large-radius liners, respectively. We have utilized the resistive magnetohydrodynamic code PLUTO to study the development of magneto-Rayleigh–Taylor(MRT) instabilities under experimental conditions. The calculated perturbation amplitudes are consistent with the experimental observations very well. We have found that both mode coupling and long implosion distance are responsible for the more developed instabilities in the large-radius liner implosions.

Fast and Accurate Identification of <i>M. tuberculosis</i>Complex Using an Immunochromatographic MPT64 Antigen Detection Test

Background: A new rapid Immunochromatographic test (ICT) kit (MPT64 TB Ag Kit) for detection of MPT64 Antigen in M. tuberculosis (MTB) isolates used for rapid identification of MTB isolates developed by SD (Standard Diagnostics) Bio line, South Korea was evaluated. The ICT is a rapid, reliable and cheaper method that can be used instead of conventional biochemical tests for confirming MTB in culture isolates in resource limited laboratories. The study also evaluated the ability of ICT to detect MPT64-Antigen before the micro MGIT could signal positive. Material/Methods: A total of 450 sputum samples of individual patients were used for the study. 152 isolates of Mycobacteria were recovered from solid and liquid media. These strains were tested for the detection of MPT64-antigen. H37Rv strain was served as the positive reference control and also used for early detection of Antigen experiment. Findings: The development of bands on both test and sample region when H37Rv strain was tested were seen (MPT64 antigen positive). When 138 MTB isolates were tested, it showed a similar banding pattern indicating 100% sensitivity. MPT64 band formation was not detected in any of the 14 isolates indicating 100% specificity. Both PPV & NPV were 100%. All the isolates negative for MPT64 Ag were confirmed as MOTT by conventional bio-chemical PNBA. The H37Rv strain showed a faint band from the 2nd day onwards from inoculation till 3rd day in the earlier Antigen detection experiment. Conclusion: Rapid identification of MTB culture isolate is a pressing need for diagnosis and proceeding to perform drug susceptibility testing. MPT64 TB Ag detection ICT kit is a rapid, reliable method, good substitute for molecular identification methods, and conventional biochemical test which is time-consuming and technically demanding. The early detection of Antigen can be used as an effective tool in diagnosis.

From concept to reality-A review to the primary test stand and its preliminary application in high energy density physics

Pulsed power technology,whereas the electrical energy stored in a relative long period is released in much shorter timescale,is an efficient method to create high energy density physics(HEDP)conditions in laboratory.Around the beginning of this century,China Academy of Engineering Physics(CAEP)began to build some experimental facilities for HEDP investigations,among which the Primary Test Stand(PTS),a multi-module pulsed power facility with a nominal current of 10 MA and a current rising time~90 ns,is an important achievement on the roadmap of the electro-magnetically driven inertial confinement fusion(ICF)researches.PTS is the first pulsed power facility beyond 10 TW in China.Therefore,all the technologies have to be demonstrated,and all the engineering issues have to be overcome.In this article,the research outline,key technologies and the preliminary HEDP experiments are reviewed.Prospects on HEDP research on PTS and pulsed power development for the next step are also discussed.

Intelligent System for Parallel Fault-Tolerant Diagnostic Tests Construction

This investigation deals with the intelligent system for parallel fault-tolerant diagnostic tests construction. A modified parallel algorithm for fault-tolerant diagnostic tests construction is proposed. The algorithm is allowed to optimize processing time on tests construction. A matrix model of data and knowledge representation, as well as various kinds of regularities in data and knowledge are presented. Applied intelligent system for diagnostic of mental health of population which is developed with the use of intelligent system for parallel fault-tolerant DTs construction is suggested.

Assessing cutter-rock interaction during TBM tunnelling in granite:Large-scale standing rotary cutting tests and 3D DEM simulations

The widespread utilisation of tunnel boring machines(TBMs)in underground construction engineering requires a detailed investigation of the cutter-rock interaction.In this paper,we conduct a series of largescale standing rotary cutting tests on granite in conjunction with high-fidelity numerical simulations based on a particle-type discrete element method(DEM)to explore the effects of key cutting parameters on the TBM cutter performance and the distribution of cutter-rock contact stresses.The assessment results of cutter performance obtained from the cutting tests and numerical simulations reveal similar dependencies on the key cutting parameters.More specifically,the normal and rolling forces exhibit a positive correlation with penetration but are slightly influenced by the cutting radius.In contrast,the side force decreases as the cutting radius increases.Additionally,the side force shows a positive relationship with the penetration for smaller cutting radii but tends to become negative as the cutting radius increases.The cutter's relative effectiveness in rock breaking is significantly impacted by the penetration but shows little dependency on the cutting radius.Consequently,an optimal penetration is identified,leading to a low boreability index and specific energy.A combined Hertz-Weibull function is developed to fit the cutter-rock contact stress distribution obtained in DEM simulations,whereby an improved CSM(Colorado School of Mines)model is proposed by replacing the original monotonic cutting force distribution with this combined Hertz-Weibull model.The proposed model outperforms the original CSM model as demonstrated by a comparison of the estimated cutting forces with those from the tests/simulations.The findings from this work that advance our understanding of TBM cutter performance have important implications for improving the efficiency and reliability of TBM tunnelling in granite.

Performance and Safety Improvement of Induction Motors based on Testing and Evaluation Standards

The induction motor,which converts electrical energy into mechanical energy,has been recognized as the cornerstone of industrialization.The rotor of an induction motor can be either a squirrel cage rotor or a wound-type rotor,both existing as magnetless topologies.Three-phase squirrel cage induction motors are frequently utilized in industrial drives because they are dependable,have high starting torque,are selfstarting and affordable.Single-phase induction motors,on the other hand,are commonly used for small loads such as domestic appliances in form of modest fans,pumps and electric power tools.In South Africa,there have been reports of fires and explosions resulting in live and property loss because of induction motors that have not been thoroughly tested or are incorrectly labelled in terms of ratings,electrical safety and performance.The goal of this study is targeted at preventing end-user injuries and failures caused by non-compliant induction motors,by evaluating locally manufactured/imported induction motors based on tests and evaluation from standards(IEC and SANS).The study is conducted using experimental procedures at the Explosion Prevention Technology and Rotating Machines(EPT and RM)laboratory,South African Bureau of Standards(SABS),South Africa.The main finding from the study shows differences in the nameplate characteristics of various induction motors which could have detrimental effects such as production and operational downtime in their end-use industries,at later stages.

Recent standardization of treatment strategy for pancreatic neuroendocrine tumors

Recent advances in localization techniques,such as the selective arterial secretagogue injection test(SASI test) and somatostatin receptor scintigraphy have promoted curative resection surgery for patients with pancreatic neuroendocrine tumors(PNET).For patients with sporadic functioning PNET,curative resection surgery has been established by localization with the SASI test using secretin or calcium.For curative resection of functioning PNET associated with multiple endocrine neoplasia type 1(MEN 1) which are usually multiple and sometimes numerous,resection surgery of the pancreas and/or the duodenum has to be performed based on localization by the SASI test.As resection surgery of PNET has increased,several important pathological features of PNET have been revealed.For example,in patients with Zollinger-Ellison syndrome(ZES),duodenal gastrinoma has been detected more frequently than pancreatic gastrinoma,and in patients with MEN 1 and ZES,gastrinomas have been located mostly in the duodenum,and pancreatic gastrinoma has been found to co-exist in 13% of patients.Nonfunctioning PNET in patients with MEN 1 becomes metastatic to the liver when it is more than 1 cm in diameter and should be resected after careful observation.The most important prognos-tic factor in patients with PNET is the development of hepatic metastases.The treatment strategy for hepatic metastases of PNET has not been established and aggressive resection with chemotherapy and trans-arterial chemoembolization have been performed with significant benefit.The usefulness of octreotide treatment and other molecular targeting agents are currently being assessed.

Field Load Test Based SHM System Safety Standard Determination for Rigid Frame Bridge

The deteriorated continuous rigid frame bridge is strengthened by external prestressing. Static loading tests wereconducted before and after the bridge rehabilitation to verify the effectiveness of the rehabilitation process. Thestiffness of the repaired bridge is improved, and the maximum deflection of the load test is reduced from 37.9 to27.6 mm. A bridge health monitoring system is installed after the bridge is reinforced. To achieve an easy assessmentof the bridge’s safety status by directly using transferred data, a real-time safety warning system is createdbased on a five-level safety standard. The threshold for each safety level will be determined by theoretical calculationsand the outcomes of static loading tests. The highest risk threshold will be set at the ultimate limit statevalue. The remaining levels, namely middle risk, low risk, and very low risk, will be determined usingreduction coefficients of 0.95, 0.9, and 0.8, respectively.

The Danger within:Covid-19 Affinity for ACE2 Receptors in Adipose Tissue and Testes.The Protective Effects of Estradiol,Fitness,and Weight Management

The imminent danger of the Covid-19 pandemic has accelerated research in pharmaceuticals that either target the viral Spike proteins fusion with ACE2 receptors,or the infectious RNA replication that often overwhelms immune defences.The scope of this review was to elucidate the main human vulnerabilities to Covid-19,including the accumulation of ACE2 receptors in testes,adipose tissue,thyroid,heart and kidneys that escalate viral affinity in males,the aged,and certain medical conditions,including diabetes,CVD,and pulmonary diseases.Pre-existing inflammation inherent in obesity may exacerbate the“cytokine storm,”a rampaging immune reaction during the course of Covid-19 that is deleterious to the host.We examined the molecular dynamics illustrating the action of new therapeutics necessary for Covid-19 patients;the estradiol advantage hypothesis;alternative therapies including hormone replacement procedures and mesenchymal stem cells;plus preventive and protective interventions.The current perspective also explored the primary components of dysregulated health predisposing individuals to Covid-19,including hormonal imbalance,increased lipids and lipoproteins,thyroid dysfunction,degraded fitness,and age-related testosterone decline accompanied by cortisol increase that provokes stress eating behaviours and weight accumulation.Obesity increases the probability of Covid-19 infection due to its abundance of ACE2 receptors;while physical activity may decrease Covid-19 vulnerability,by reducing fat and increasing muscle mass that manifests a relatively inhibited ACE2 expression.Several weight management solutions feature lasers and radiofrequency which diminish subcutaneous adiposity but do not enhance fitness.A data metanalysis of seven recently published clinical studies on 95 obese individuals,73 males and 22 females with an average BMI of 30.9,demonstrated visceral fat reduction combined with increased skeletal muscle mass.It also revealed a statistically significant decrease in BMI,lipids,lipoproteins,inflammation and toxicity as measured by CRP,Creatinine and Bilirubin respectively,juxtaposed by optimally healthier levels of Cortisol,Testosterone,Free T3,IGF-1,Insulin,and the appetite controlling hormones Leptin and Ghrelin.

Two stages power generation test of the hot dry rock exploration and production demonstration project in the Gonghe Basin,northeastern Qinghai-Tibet plateau,China

The Hot Dry Rock(HDR)is considered as a clean and renewable energy,poised to significantly contribute to the global energy decarbonization agenda.Many HDR projects worldwide have accumulated valuable experience in efficient drilling and completion,reservoir construction,and fracture simulation.In 2019,China Geological Survey(CGS)initiated a demonstration project of HDR exploration and production in the Gonghe Basin,aiming to overcome the setbacks faced by HDR projects.Over the ensuing four years,the Gonghe HDR project achieved the first power generation in 2021,followed by the second power generation test in 2022.After establishing the primary well group in the initial phase,two directional wells and one branch well were drilled.Noteworthy progress was made in successfully constructing the targeted reservoir,realizing inter-well connectivity,power generation and grid connection,implementing of the real-time micro-seismic monitoring.A closed-loop technical validation of the HDR exploration and production was completed.However,many technical challenges remain in the process of HDR industrialization,such as reservoir fracture network characterization,efficient drilling and completion,multiple fracturing treatment,continuous injection and production,as well as mitigation of induced seismicity and numerical simulation technology.

温度和热驯化对胡氏大生熊虫运动行为的影响

The beneficial acclimation hypothesis (BAH) predicts that animals acclimated to a particular temperature have enhanced performance or fitness at that temperature in comparison with animals acclimated to other temperatures. The BAH has been tested by a variety of empirical examinations, and was rejected by some of them. In order to provide new evidences for the BAH, the effects of acute and acclimation temperature (AT) on locomotor performance of Macrobiotus hufelandi (Tardigrada: Macrobiotidae) were investigated. The tardigrades were collected from Nanwutai, Qinling Mountains which traverse from west to east in central China. The subjects were acclimated to either 2℃ or 22℃ for 2 weeks. The animal was transferred onto a frosted slide and allowed to walk freely at the performance temperature (PT) 2℃ or 22℃. Only one individual was tested per test bout, which lasted from three to five minutes. To avoid occurrence of thermal acclimation effect, the standard adaptation time was limited to 1.5 min. Each subject was tested for once at the same PT, and was tested only at one PT. A total of 25 individuals were tested and measured at the same PT. The locomotor performance of the animals was recorded with a digital video camera mounted on a microscope at 4×10 amplification and replayed on a PC. Every subject was identified. Walking speed (WS) and percentage of time moving (PTM) at both PTs (2℃ or 22℃) were selected as the rate parameters of locomotor performance. The two-way repeated measures ANOVA with a significance level of α= 0.05 and Duncan multiple range test were used to analyze the data. WS of the animals acclimated to and tested at the same temperatures was significantly faster than that for animals acclimated to and tested at the different temperatures, similarly, PTM of the animals acclimated to 22℃ and tested at 22℃ was significantly greater than PTM of animals acclimated to 22℃ and tested at 2℃, which indicated that the animals acclimated to a particular temperature have enhanced locomotor performance in that temperature relative to the animals acclimated to that temperature in other thermal environment. WS of the animals acclimated to 22℃ and tested at 22℃ was significantly faster than WS of animals acclimated to 2℃ and tested at 22℃, PTM of the animals acclimated to 22℃ and tested at 22℃ was significantly greater than PTM of animals acclimated to 2℃ and tested at 22℃. These results supported the BAH. It could be concluded that the PT and thermal acclimation as well as the interaction between the PT and AT significantly influence the locomotor performance of M.hufelandi, and that, despite the existence of a few results of this study that don’t support the BAH, some results of this study support for this hypothesis, and that the animals acclimated to a particular temperature have enhanced locomotor performance in that temperature relative to the animals acclimated to that temperature in other thermal environment, implying that any performance temperature that deviates from the acclimation temperature could cause the reduction of the walking speed which is closely related to the fitness of the M.hufelandi.

Automatic Control of Automobile Transmission Performance Test Stand

To realize automatic control of automobile transmission performance test stand Methods The automatic control technique of the lubricant temperature,the program- controll- edautomaticshifting of the transmission,the continuous adjusting of revolution speed and load, data-acquisition and data real-time processing were adopted.Results The lubricant temperature was controlled at the set temperature ±2℃.The automatic shifting of the trans- mission is simple,reliable and accurate.The automatic adjusting of load and rotation speed is rapidandaccurate,the torque divergence is ±1N·m,the rotation speed divergence is ±5r/min Conclusion The four kinds of techniques are applied into the automobile transmission perfor- mance test stand successfully. mancetest stand successfully.

New Regularization Algorithms for Solving the Deconvolution Problem in Well Test Data Interpretation

Two new regularization algorithms for solving the first-kind Volterra integral equation, which describes the pressure-rate deconvolution problem in well test data interpretation, are developed in this paper. The main features of the problem are the strong nonuniform scale of the solution and large errors (up to 15%) in the input data. In both algorithms, the solution is represented as decomposition on special basic functions, which satisfy given a priori information on solution, and this idea allow us significantly to improve the quality of approximate solution and simplify solving the minimization problem. The theoretical details of the algorithms, as well as the results of numerical experiments for proving robustness of the algorithms, are presented.

3-D Modelling of the Confederation Bridge Using Data of Full Scale Tests

Long-span bridges are special structures that require advanced analysis techniques to examine their performance. This paper presents a procedure developed to model the Confederation Bridge using 3-D beam elements. The model was validated using the data collected before the opening of the bridge to the public. The bridge was instrumented to conduct fullscale static and dynamic tests. The static tests were to measure the deflection of the bridge pier while the dynamic tests to measure the free vibrations of the pier due to a sudden release of the static load. Confederation Bridge is one of the longest reinforced concrete bridges in the world. It connects the province of Prince Edward Island and the province of New Brunswick in Canada. Due to its strategic location and vital role as a transportation link between these two provinces, it was designed using higher safety factors than those for typical highway bridges. After validating the present numerical model, a procedure was developed to evaluate the performance of similar bridges subjected to traffic and seismic loads. It is of interest to note that the foundation stiffness and the modulus of elasticity of the concrete have significant effects on the structural responses of the Confederation Bridge.

Infectious Disease Update in Obstetrics: A Modern Approach to the Patient with a Positive Screening Test for Syphyilis in Pregnancy

Screening for maternal syphilis has been an essential component of routine antenatal screening tests in most countries for many years. This is not only because of the virulence of the spirochete which causes the infection but also because of its vertical transmission rate and the potential severe adverse complications/morbidity that can result from its transmission to the fetus. Although the incidence of maternal syphilis and its fetal sequalae in low-income countries has been considerable for several years, the disease has been almost non-existent in high income countries with wide antenatal screening coverage and effective treatment programmes for Syphilis. The recent alarming increase in the incidence of maternal syphilis in high income countries has spawned a renewed public health interest in the infection, with several countries updating and strengthening public health guidance in an attempt to stem this dramatic trend. This is a short clinical update for the practising obstetrician on how to manage the antenatal patient with a positive syphilis screening test.

Cortical activity in patients with high-functioning ischemic stroke during the Purdue Pegboard Test:insights into bimanual coordinated fine motor skills with functional near-infrared spectroscopy

After stroke,even high-functioning individuals may experience compromised bimanual coordination and fine motor dexterity,leading to reduced functional independence.Bilateral arm training has been proposed as a promising intervention to address these deficits.However,the neural basis of the impairment of functional fine motor skills and their relationship to bimanual coordination performance in stroke patients remains unclear,limiting the development of more targeted interventions.To address this gap,our study employed functional near-infrared spectroscopy to investigate cortical responses in patients after stroke as they perform functional tasks that engage fine motor control and coordination.Twenty-four high-functioning patients with ischemic stroke(7 women,17 men;mean age 64.75±10.84 years)participated in this cross-sectional observational study and completed four subtasks from the Purdue Pegboard Test,which measures unimanual and bimanual finger and hand dexterity.We found significant bilateral activation of the sensorimotor cortices during all Purdue Pegboard Test subtasks,with bimanual tasks inducing higher cortical activation than the assembly subtask.Importantly,patients with better bimanual coordination exhibited lower cortical activation during the other three Purdue Pegboard Test subtasks.Notably,the observed neural response patterns varied depending on the specific subtask.In the unaffected hand task,the differences were primarily observed in the ipsilesional hemisphere.In contrast,the bilateral sensorimotor cortices and the contralesional hemisphere played a more prominent role in the bimanual task and assembly task,respectively.While significant correlations were found between cortical activation and unimanual tasks,no significant correlations were observed with bimanual tasks.This study provides insights into the neural basis of bimanual coordination and fine motor skills in high-functioning patients after stroke,highlighting task-dependent neural responses.The findings also suggest that patients who exhibit better bimanual performance demonstrate more efficient cortical activation.Therefore,incorporating bilateral arm training in post-stroke rehabilitation is important for better outcomes.The combination of functional near-infrared spectroscopy with functional motor paradigms is valuable for assessing skills and developing targeted interventions in stroke rehabilitation.

A New Maximum Test via the Dependent Samples t-Test and the Wilcoxon Signed-Ranks Test

A maximum test in lieu of forcing a choice between the two dependent samples t-test and Wilcoxon signed-ranks test is proposed. The maximum test, which requires a new table of critical values, maintains nominal α while guaranteeing the maximum power of the two constituent tests. Critical values, obtained via Monte Carlo methods, are uniformly smaller than the Bonferroni-Dunn adjustment, giving it power superiority when testing for treatment alternatives of shift in location parameter when data are sampled from non-normal distributions.

Presentation of Empirical Equations for Estimating Internal Friction Angle of GW and GC Soils in Mashhad, Iran Using Standard Penetration and Direct Shear Tests and Comparison with Previous Equations

Presentation of empirical equations for estimating engineering properties of soils is a simple, low cost and widely-used method. One of the major concerns in using these equations is evaluating their accuracy in different conditions and regions which often lead to doubts about obtained results. Most of these equations were derived in special laboratories, different climate conditions and in soils with different geotechnical and geological engineering properties and were generalized to other conditions. The main question is that whether these methods are also applicable to other conditions. Using local equations and narrowing the usage range of various methods based on each region’s properties are appropriate methods to solve these problems. This leads to simplified and faster analysis and high reliability in the obtained results. In this paper, empirical equations were derived to estimate internal friction angle, based on SPT numbers of Mashhad City’s soils in Iran, using SPT and direct shear tests results from 50 samples (25 GW and 25 GC soil samples). The results showed similar values for predicted?φ?values by SPT test and?φ?values determined by direct shear tests.

Research on multi-time scale doubly-fed wind turbine test system based on FPGA+CPU heterogeneous calculation

As the proportion of renewable energy increases, the interaction between renewable energy devices and the grid continues to enhance. Therefore, the renewable energy dynamic test in a power system has become more and more important. Traditional dynamic simulation systems and digital-analog hybrid simulation systems are difficult to compromise on the economy, flexibility and accuracy. A multi-time scale test system of doubly fed induction generator based on FPGA+ CPU heterogeneous calculation is proposed in this paper. The proposed test system is based on the ADPSS simulation platform. The power circuit part of the test system is setup up using the EMT(electromagnetic transient simulation) simulation, and the control part uses the actual physical devices. In order to realize the close-loop testing for the physical devices, the power circuit must be simulated in real-time. This paper proposes a multi-time scale simulation algorithm, in which the decoupling component divides the power circuit into a large time scale system and a small time scale system in order to reduce computing effort. This paper also proposes the FPGA+CPU heterogeneous computing architecture for implementing this multitime scale simulation. In FPGA, there is a complete small time-scale EMT engine, which support the flexibly circuit modeling with any topology. Finally, the test system is connected to an DFIG controller based on Labview to verify the feasibility of the test system.