Comparison of femoral neck fracture healing and affected limb pain after anterolateral-approach minimally invasive total hip replacement and hemiarthroplasty

Objective:To study the differences in femoral neck fracture healing and affected limb pain after anterolateral-approach minimally invasive total hip replacement and hemiarthroplasty. Methods:A total of 92 patients with femoral neck fracture who received hip replacement in our hospital between May 2013 and December 2015 were selected and randomly divided into total hip and half hip group, total hip group received anterolateral-approach minimally invasive total hip replacement, half hip group received anterolateral-approach minimally invasive hemiarthroplasty, and 1 month after operation, serum was collected to detect the levels of bone metabolism markers, osteocyte cytokines, SP and CGRP.Results:1 month after operation, serum PINP, PICP, BMP, TGF-β, FGF, IGF-I and IGF-II levels of total hip group were significantly higher than those of half hip group while TRAP5b and CatK levels were significantly lower than those of half hip group;the day after operation, serum pain media SP and CGRP levels were not significantly different between the two groups of patients;36 h after operation, serum SP and CGRP levels of total hip group were significantly lower than those of half hip group.Conclusion:The bone metabolism after anterolateral-approach minimally invasive total hip replacement is better than that after hemiarthroplasty, and the degree of pain is less than that after hemiarthroplasty.

Which approach of total hip arthroplasty is the best efficacy and least complication?

BACKGROUND Total hip arthroplasty is as an effective intervention to relieve pain and improve hip function.Approaches of the hip have been exhaustively explored about pros and cons.The efficacy and the complications of hip approaches remains inconclusive.This study conducted an umbrella review to systematically appraise previous meta-analysis(MAs)including conventional posterior approach(PA),and minimally invasive surgeries as the lateral approach(LA),direct anterior approach(DAA),2-incisions method,mini-lateral approach and the newest technique direct superior approach(DSA)or supercapsular percutaneouslyassisted total hip(SuperPath).AIM To compare the efficacy and complications of hip approaches that have been published in all MAs and randomized controlled trials(RCTs).METHODS MAs were identified from MEDLINE and Scopus from inception until 2023.RCTs were then updated from the latest MA to September 2023.This study included studies which compared hip approaches and reported at least one outcome such as Harris Hip Score(HHS),dislocation,intra-operative fracture,wound compliData were independently selected,extracted and assessed by two reviewers.Network MA and cluster rank and surface under the cumulative ranking curve(SUCRA)were estimated for treatment efficacy and safety.RESULTS Finally,twenty-eight MAs(40 RCTs),and 13 RCTs were retrieved.In total 47 RCTs were included for reanalysis.The results of corrected covered area showed high degree(13.80%).Among 47 RCTs,most of the studies were low risk of bias in part of random process and outcome reporting,while other domains were medium to high risk of bias.DAA significantly provided higher HHS at three months than PA[pooled unstandardized mean difference(USMD):3.49,95%confidence interval(CI):0.98,6.00 with SUCRA:85.9],followed by DSA/SuperPath(USMD:1.57,95%CI:-1.55,4.69 with SUCRA:57.6).All approaches had indifferent dislocation and intraoperative fracture rates.SUCRA comparing early functional outcome and composite complications(dislocation,intra-operative fracture,wound complication,and nerve injury)found DAA was the best approach followed by DSA/SuperPath.CONCLUSION DSA/SuperPath had better earlier functional outcome than PA,but still could not overcome the result of DAA.This technique might be the other preferred option with acceptable complications.

Examining the“revisability”benefit of hip resurfacing arthroplasty

BACKGROUND Hip resurfacing arthroplasty(HRA)is an alternative to total hip arthroplasty(THA)that is typically reserved for young active patients because it preserves bone.However,the benefits of HRA only hold true if conversion THA after failed HRA provides acceptable outcomes.AIM To compare patient reported outcomes for conversion THA after HRA failure to primary THA.METHODS A retrospective review of 36 patients(37 hips)that underwent conversion THA for failed HRA between October 2006 and May 2019 by a single surgeon was performed.Patient reported outcomes[modified Harris Hip Score(mHHS),University of California Los Angeles(UCLA)activity score]were obtained via an email-based responder-anonymous survey.Outcomes were compared to normative data of a primary THA cohort with similar demographics.Subgroup analysis was performed comparing outcomes of conversion THA for adverse local tissue reaction(ALTR)vs all other causes for failure.RESULTS The study group had a lower mHHS than the control group(81.7±13.8 vs 90.2±11.6,P<0.01);however,both groups had similar UCLA activity levels(7.5±2.3 vs 7.2±1.6,P=0.51).Patients that underwent conversion for non-ATLR causes had similar mHHS(85.2±11.5 vs 90.2±11.6,P=0.11)and higher UCLA activity levels(8.5±1.8 vs 7.2±1.6,P<0.01)compared to the control group.Patients that underwent conversion for ATLR had worse mHHS(77.1±14.5 vs 90.2±11.6,P<0.01)and UCLA activity levels(6.1±2.3 vs 7.2±1.6,P=0.05)when compared to the control group.CONCLUSION Patient outcomes equivalent to primary THA can be achieved following HRA conversion to THA.However,inferior outcomes were demonstrated for ALTR-related HRA failure.Patient selection and perhaps further studies examining alternative HRA bearing surfaces should be considered.

Metallic debris from metal-on-metal total hip arthroplasty regulates periprosthetic tissues

The era of metal-on-metal(MoM) total hip arthroplasty has left the orthopaedic community with valuable insights and lessons on periprosthetic tissue reactions to metallic debris. Various terms have been used to describe the tissue reactions. Sometimes the nomenclature can be confusing. We present a review of the concepts introduced by Willert and Semlitsch in 1977,along with further developments made in the understanding of periprosthetic tissue reactions to metallic debris. We propose that periprosthetic tissue reactions be thought of as(1) gross(metallosis, necrosis, cyst formation and pseudotumour);(2) histological(macrophage-dominated, lymphocyte-dominated or mixed);and(3) molecular(expression of inflammatory mediators and cytokines such as interleukin-6 and tumor necrosis factor-alpha). Taper corrosion and modularity are discussed, along with future research directions to elucidate the antigen-presenting pathways and materi-al-specific biomarkers which may allow early detection and intervention in a patient with adverse periprosthetic tissue reactions to metal wear debris.

Technical note for intraoperative determination of proper acetabular cup size in primary total hip arthroplasty

BACKGROUND Selecting the optimal size of components is crucial when performing a primary total hip arthroplasty.Implanting the accurate size of the acetabular component can occasionally be exacting,chiefly for surgeons with little experience,whilst the complications of imprecise acetabular sizing or over-reaming can be potentially devastating.AIM To assist clinicians intraoperatively with a simple and repeatable tip in elucidating the ambivalence when determining the proper acetabular component size is not straightforwardly achieved,specifically when surgeons are inexperienced or preoperative templating is unavailable.METHODS This method was employed in 263 operations in our department from June 2021 to December 2022.All operations were performed by the same team of joint reconstruction surgeons,employing a typical posterior hip approach technique.The types of acetabular shells implanted were:The Dynasty®acetabular cup system(MicroPort Orthopedics,Shanghai,China)and the R3®acetabular system(Smith&Nephew,Watford,United Kingdom),which both feature cementless press-fit design.RESULTS The mean value of all cases was calculated and collated with each other.We distinguished as oversized an implanted acetabular shell when its size was>2 mm larger than the size of the acetabular size indicator reamer(ASIR)or when the implanted shell was larger than 4 mm compared to the preoperative planned cup.The median size of the implanted acetabular shell was 52(48–54)mm,while the median size of the preoperatively planned cup was 50(48–56)mm,and the median size of the ASIR was 52(50–54)mm.The correlation coefficient between ASIR size and implanted acetabular component size exhibited a high positive correlation with r=0.719(P<0.001).Contrariwise,intraoperative ASIR measurements precisely predicted the implanted cups’size or differed by only one size(2 mm)in 245 cases.CONCLUSION In our study,we demonstrated that the size of the first acetabular reamer not entering freely in the acetabular rim corroborates the final acetabular component size to implant.This was also corresponding in the majority of the cases with conventional preoperative templating.It can be featured as a valid tool for avoiding the potentially pernicious complications of acetabular cup over-reaming and over-sizing in primary total hip arthroplasty.It is a simple and reproducible technical note useful for confirming the predicted acetabular cup size preoperatively;thus,its application could be considered routinely,even in cases where preoperative templating is unavailable.

Enhanced recovery after surgery pathway: The use of fascia iliaca blocks causes delayed ambulation after total hip arthroplasty

BACKGROUND Fascia iliaca compartment blocks(FIBs) have been used to provide postoperative analgesia after total hip arthroplasty(THA). However, evidence of their efficacy remains limited. While pain control appears to be satisfactory, quadriceps weakness may be an untoward consequence of the block. Prior studies have shown femoral nerve blocks and fascia iliaca blocks as being superior for pain control and ambulation following THA when compared to standard therapy of parenteral pain control. However, most studies allowed patients to ambulate on post-operative day(POD) 2-3, whereas new guidelines suggest ambulation on POD 0 is beneficial.AIM To determine the effect of FIB after THA in patients participating in an enhanced recovery after surgery(ERAS) program.METHODS We conducted a retrospective analysis of patients undergoing THA with or without FICBs and their ability to ambulate on POD 0 in accordance with ERAS protocol. Perioperative data was collected on 39 patients who underwent THA.Demographic data, anesthesia data, and ambulatory outcomes were compared.RESULTS Twenty patients had FIBs placed at the conclusion of the procedure, while 19 did not receive a block. Of the 20 patients with FIB, only 1 patient was able to ambulate. Of the 19 patients without FIB blocks, 17 were able to ambulate. All patients worked with physical therapy 2 h after arriving in the post-anesthesia care unit on POD 0.CONCLUSION Our data suggests an association between FIB and delayed ambulation in the immediate post-operative period.

Acute compartment syndrome of the thigh following hip replacement by anterior approach in a patient using oral anticoagulants

Acute compartment syndrome(ACS) of the thigh following primary total hip arthroplasty(THA) is a highly uncommon complication and has not yet been reported before with regards to the anterior approach through the anterior supine interval. We present a case of a 69-year-old male patient with a history of stroke, who developed ACS of the thigh after elective THA while using therapeutic low molecular weight heparin as bridging for regular oral anticoagulation. ACS pathogenesis, diagnostic tools, treatment and relevant literature are discussed. The patient's ACS was recognized in time and treated by operative decompression with fasciotomy of the anterior compartment. Follow-up did not show any neurological deficit or soft-tissue damage.

Conversion hip arthroplasty for failed nailing of intertrochanteric fracture: Reflections on some important aspects

In this editorial,I present my comments on the article by Solarino et al.Conversion hip arthroplasty,which is an optional salvage procedure performed following unsuccessful fixation of intertrochanteric femur fractures in elderly pati-ents,entails more complex processes and higher rates of operative complications than primary arthroplasty.Hence,it is important to consider the appropriateness of the primary treatment choice,as well as the adequacy of nailing fixation for intertrochanteric fractures.This article briefly analyzes the possible factors contributing to the nailing failure of intertrochanteric fractures and attempts to find corresponding countermeasures to prevent fixation failures.It also analyzes the choice of treatment between nailing fixation and primary arthroplasty for intertrochanteric fractures.

Is Robotic Arm Assisted Total Hip Arthroplasty More Bone Preserving than Conventional Hip Replacements and Hip Resurfacing?

Background: Total hip arthroplasty (THA) is a common procedure that is increasingly being performed in younger patients. Deep acetabular reaming will result in more bone loss and the need for large acetabular components to be implanted. It can also lead to impingement, loosening, an altered center of rotation, and intraoperative periprosthetic fracture. The purpose of this study is to determine whether the single ream, robotic arm-assisted (RAA) THA can preserve a greater volume of bone stock compared to conventional hip replacement and resurfacing. Methods: We prospectively recruited 69 patients who had undergone primary THA using the Stryker Trident Acetabular System&reg;in combination with the Stryker RAA System (MAKO)&reg;and compared their mean reaming weight (g) with that of conventional hip replacement and resurfacing, as measured by Brennan et al. Comparison of acetabular reaming during hip resurfacing versus uncemented THA (J Orthop Surg. 2009;17(1): 42-46). Results: The mean reaming weight using the MAKO system was 9.08 g, which was 29% less than the reaming weight using uncemented THA and hip resurfacing of 12.75 g. None of the acetabular cups required screw fixation. During the 35-month follow-up period, there were no complications related to cup placement or positioning. Conclusions: The use of RAA THA results in statistically significant preservation of acetabular bone compared to conventional hip replacement and resurfacing. This approach reflects the increased precision offered by RAA single reaming. Surgeons may consider utilizing RAA THA, particularly in younger patients, to better preserve bone stock as this could potentially impact future revision procedures.

Survival outcomes of cemented compared to uncemented stems in primary total hip replacement

Total hip replacement(THR) is a successful and reliable operation for both relieving pain and improving function in patients who are disabled with end stage arthritis.The ageing population is predicted to significantly increase the requirement for THR in patients who have a higher functional demand than those of the past. Uncemented THR was introduced to improve the long term results and in particular the results in younger, higher functioning patients. There has been controversy about the value of uncemented compared to cemented THR although there has been a world-wide trend towards uncemented fixation. Uncemented acetabular fixation has gained wide acceptance, as seen in the increasing number of hybrid THR in joint registries, but there remains debate about the best mode of femoral fixation.In this article we review the history and current worldwide registry data, with an in-depth analysis of the New Zealand Joint Registry, to determine the results of uncemented femoral fixation in an attempt to provide an evidence-based answer as to the value of this form of fixation.

Usefulness of Hammering Sound Frequency Analysis as an Evaluation Method for the Prevention of Trouble during Hip Replacement

In total hip arthroplasty, judgment of the appropriateness of stem hammering is dependent on the experience and feelings of the surgeon and no objective evaluation method has been established. In this study, a frequency analysis of the hammering sounds in total hip arthroplasty was performed to investigate objective judgment criteria capable of preventing problems during surgery. Stem hammering was applied following the surgeon’s feelings as usual in an operating room. A directional microphone was placed at a distance about 2 m from the surgical field and the peak frequency reaching the maximum amplitude was determined by Fourier analysis. It was clarified that the same peak frequency repeats when appropriate fixation is acquired during surgery, suggesting that intraoperative fracture and postoperative loosening can be prevented by stopping hammering at the time the peak frequency converged. Investigation of changes in the hammering sound frequency may serve as objective judgment criteria capable of preventing problems during surgery.

Biodegradation of Polymethylmethacrylate Bone Cement May Not Be a Serious Issue in Total Hip Arthroplasty—Retrieval Study for Knoop Hardness and Young’s Modulus

Introduction: To investigate a long-term in vivo deterioration of polymethylmethacrylate (PMMA) bone cement over time, we evaluated retrieved PMMA cement in terms of chemical elements presenting in the cement using energy dispersive analysis of X-rays;Knoop hardness;and the Young’s modulus using scanning acoustic microscopy. Materials and Methods: For mechanical evaluation, we could neglect the influences of entrapped air bubbles or blood by the use of small specimens. The study was based on thirteen cement samples (six used in the acetabulum and seven in the femur) derived from eight patients (age at revision surgery: mean 72.5, range 68 to 79). All of these samples were Simplex-P?cement. They were functioning well at least ten years after the previous surgery. Duration until revision surgery was ranged 12 to 25 years (average, 17.4 years). The reason for revision was aseptic mechanical loosening. Twenty samples of Simplex-Preg;cement were served by manually mixing as a control. Results: The average of the hardness of the cement was 17.0 ± 1.2 (range, 13.4-20.6). In the control, the hardness was 17.8 ± 1.5 (range, 14.0-24.6). There was no significant difference between these values. The mean of Young’s modulus of the cement was 5.61 ± 0.19 GPa (range, 5.09-6.10). In the control, the modulus was 6.04 ± 0.13 GPa (range, 5.68-6.45). Although the modulus was significantly less than that of the control, there was only 7% decrease in average between twelve and twenty-five years in vivo. Conclusions: Our results suggest that long-term implantation and functional loading in vivo may not be the limiting factor in the mechanical integrity of the bone cement.

Prosthetic Impingement in Total Hip Arthroplasty—The Trigger for Adverse Wear

Development of total hip arthroplasty (THA) now spans more than 5 decades encompassing combinations of metal-on-metal (MOM), ceramic-on-metal (COM), metal-on-plastic (MOP), ceramic-on-plastic (COM), and ceramic-on-ceramic (COC). In every arena of extensive technical development, there exists a data set that when viewed in isolation seemed of little import, but when assembled in-toto may produce a generational shift in perception. Our review focused on two such THA events. Firstly, COC retrieval studies (1999-2001) noted habitual wear patterns on heads and peripheral wear stripes, along with femoral-neck impingement, and ceramic surfaces stained gray by metal debris. These COC data indicated THA risks included, 1) cup edge-loading (E/L) on heads producing “stripe wear”, 2) component impingement releasing metal particles resulting in 3) tissues contaminated by metal debris. A corresponding MOM impingement-debris mechanism was only perceived by Howie (2005) in a McKee-Farrar retrieval study. Our anticipation at LLUMC was that MOM retrievals would provide superior wear details to those seen on COC retrievals. We noted stripe wear in the polar zone of CoCr heads and basal stripes in the non-wear areas. The basal-polar stripe combinations were found in all MOM retrievals. Basal-polar stripe combinations followed cup-rim profiles in our LLUMC simulations of prosthetic impingement. LPUH videos demonstrated the formation of stripe wear in functional-standing and functional-sitting postures for both impingement and subluxation episodes using THA and RA designs. The stripes on CoCr heads revealed the large scratches we now term “microgrooves”. Microgroove width varied from 40 - 400 um with 100 um being typical. The longitudinal striations in microgrooves, the raised jagged lips, scratches with shallow entry and exit termini, were all indicative of a classic 3rd-body wear mechanism. The THA impingement simulations denoted four sites of edge-loading, i.e. neck-E/L, inferior cup-E/L, superior cup-E/l and head-E/L, and ingress of Ti64 particles as a contaminating-roughness effect. Individual MOM cases referred to LLUMC demonstrated dramatic evidence of neck notching. At one end of the debris spectrum, a Ti64-notch model predicting a 6 mm3 annual wear-rate represented the release of 5700 particles of 126 um-size (approximating daily release of 16 particles). At the other end of the spectrum, if metal particles were crushed between MOM surfaces to the equivalent nanometer size found in tissues, our notch model represented approximately 22-trillion Ti64 particles annually deposited in tissues. The anatomical THA models represented in LPUH videos demonstrated that even 1-degree of head subluxation from a rigid cup created a cup “lift-off” scenario (CLO) that would open a gap of 250 - 400 microns between femoral head and cup. This would void all lubrication potential and focus the total hip-joint force along the beveled cup rim, i.e. stripe wear. It is therefore interesting that MOM impingement/debris predictions by Howie et al. have not been confirmed until now or discussed in contemporary literature. Therefore, this review of 50 years of THA data demonstrated that hip impingement was always the trigger for adverse wear and that metal-backed cups represent the potential for release of metal debris at extremes of functional standing and sitting postures.

Osteolysis in total hip arthroplasty in relation to metal ion release: Comparison between monolithic prostheses and different modularities

BACKGROUND Among the various complications associated with total hip arthroplasty(THA)periprosthetic osteolysis and wear phenomena due to the release of metal particles,are two of the most common and have been reported to be correlated because of inflammatory responses directed towards released particles that generally activate macrophagic osteolytic effects.Therein,new masses known as pseudotumors can appear in soft tissues around a prosthetic implant.To date,there is paucity of reliable data from studies investigating for any association between the above mentioned adverse events.AIM To investigate for the existence of any association between serum and urine concentrations of metal-ions released in THA and periprosthetic osteolysis for modular neck and monolithic implants.METHODS Overall,76 patients were divided into three groups according to the type of hip prosthesis implants:Monoblock,modular with metal head and modular with ceramic head.With an average f-up of 4 years,we conducted a radiological evaluation in order to detect any area of osteolysis around the prosthesis of both the femur and the acetabulum.Moreover,serum and urinary tests were performed to assess the values of Chromium and Cobalt released.Statistical analysis was performed to determine any association between the ion release and osteolysis.RESULTS For the 3 study groups,the monolithic,modular ceramic-headed and modular metal-headed implants had different incidences of osteolysis events,which were higher for the modular implants.Furthermore,the most serious of these(grade 3)were detected almost exclusively for the modular implants with metal heads.A mapping of the affected areas was performed revealing that the highest incidences of osteolysis were evidenced in the pertrochanteric region at the femur level,and in the supero-external region at the acetabular level.Regarding the evaluation of the release of metals-ions from wear processes,serum and urinary chromium and cobalt values were found to be higher in cases of modularity,and even more so for those with metal head.Statistical linear correlation test results suggested positive correlations between increasing metal concentrations and incidences areas of osteolysis.However,no cases of pseudo-tumor were detected.CONCLUSION Future studies are needed to identify risk factors that increase peri-prosthetic metal ion levels and whether these factors might be implicated in the triggering of local events,including osteolysis and aseptic loosening.

Intraoperative application of three-dimensional printed guides in total hip arthroplasty: A systematic review

BACKGROUND Acetabular component positioning in total hip arthroplasty(THA)is of key importance to ensure satisfactory post-operative outcomes and to minimize the risk of complications.The majority of acetabular components are aligned freehand,without the use of navigation methods.Patient specific instruments(PSI)and three-dimensional(3D)printing of THA placement guides are increasingly used in primary THA to ensure optimal positioning.AIM To summarize the literature on 3D printing in THA and how they improve acetabular component alignment.METHODS PubMed was used to identify and access scientific studies reporting on different 3D printing methods used in THA.Eight studies with 236 hips in 228 patients were included.The studies could be divided into two main categories;3D printed models and 3D printed guides.RESULTS 3D printing in THA helped improve preoperative cup size planning and post-operative Harris hip scores between intervention and control groups(P=0.019,P=0.009).Otherwise,outcome measures were heterogeneous and thus difficult to compare.The overarching consensus between the studies is that the use of 3D guidance tools can assist in improving THA cup positioning and reduce the need for revision THA and the associated costs.CONCLUSION The implementation of 3D printing and PSI for primary THA can significantly improve the positioning accuracy of the acetabular cup component and reduce the number of complications caused by malpositioning.

Evaluation of Fever and Its Related Factors during 4 Weeks after Primary Total Hip Arthroplasty

The purpose of this study was to describe the incidence and characteristics of postoperative fever (POF;≥38℃) and clarify the correlation between POF and febrile-related factors during 4 weeks after primary total hip arthroplasty (THA). A total of 56 patients were included in the study (67 THAs). The preoperative diagnosis for all patients was osteoarthritis. The average follow-up period was 90 months. No patients developed deep infection during the follow-up period. The maximum mean peak daily temperature was 37.7℃ on the day of the surgery and the next day. Fifty-two percent of patients experienced POF, with most developing a maximum temperature (MT) on the day of surgery and the latest occurring by postoperative day (POD) 3. Only C-reactive protein (R = 0.384, p = 0.001) among the febrile-related factors had a weak correlation with MT. Four hips showed a POF of >38℃ later than POD 7;all four of these patients were diagnosed with a urinary tract infection. POF is common and may be part of a normal inflammatory response to tissue injury after THA. More than half of patients may develop POF within 1 week, with most developing MT on POD 0 and the latest occurring by POD 3. In addition, urinary tract infections might be an initial reason for POF in the subsequent 3 weeks.

Analgesic, anti-inflammatory and antioxidant effects of ultrasound-guided lower extremity nerve block for elderly hip arthroplasty

Objective:To study the analgesic, anti-inflammatory and antioxidant effects of ultrasound-guided lower extremity nerve block for elderly hip arthroplasty.Methods: A total of 99 elderly patients with femoral neck fractures who underwent hip arthroplasty in our hospital between January 2017 and March 2018 were selected, and the anesthetic solutions were reviewed and used to divide the enrolled patients into the control group (n=51) who accepted conventional general anesthesia and the nerve block group (n=48) who accepted ultrasound-guided lower extremity nerve block anesthesia. The differences in the serum levels of pain mediators, inflammatory mediators and oxidative stress indexes were compared between the two groups immediately after surgery (T0), 12 h after surgery (T1) and 24 h after surgery (T2).Results: At T0, serum levels of pain mediators, inflammatory mediators and oxidative stress indexes were not significantly different between the two groups. At T1 and T2, serum pain mediators PGF2a, SP and NPY levels of nerve block group were lower than those of control group;serum inflammatory mediators IL-1β, TNF-α and hs-CRP levels were lower than those of control group;serum oxidative stress indexes T-AOC and SOD levels were higher than those of control group whereas MDA and LHP levels were lower than those of control group.Conclusion:Ultrasound-guided lower limb nerve block for elderly hip arthroplasty has exact analgesic, anti-inflammatory and antioxidant effects.

Total hip arthroplasty for sequelae of childhood hip disorders:Current review of management to achieve hip centre restoration

Adults requiring total hip arthroplasty(THA)for childhood disorder sequelae present with shortening,limp,pain,and altered gait.THA,which can be particularly challenging due to altered anatomy,requires careful planning,assessment,and computed tomography evaluation.Preoperative templating is essential to establish the appropriate acetabular and femoral size.Information regarding neck length and offset is needed to ensure the proper options are available at THA.Hip centre restoration must be planned preoperatively and achieved intraoperatively with appropriate exposure,identification,and stable fixation with optimum-size components.Identifying the actual acetabular floor is essential as changes include altered anatomy,distortion of the margins and version changes.Proximal femur changes include anatomical variation,decreased canal diameter,cortical thickness,changes in anteversion,and metaphyseal and diaphyseal mismatch.Preoperative assessment should consist of limb assessment for variations due to prior surgical procedures.Evaluation of the shortening pattern with the relationship of the lesser trochanter to the teardrop would help identify and plan for subtrochanteric shortening osteotomy,especially in high-riding hips.The surgical approach must ensure adequate exposure and soft tissue release to achieve restoration of the anatomical hip centre.The femoral components may require modularity to enable restoration of anteversion and optimum fixation.

Current concept in dysplastic hip arthroplasty: Techniques for acetabular and femoral reconstruction

Adult patients with developmental dysplasia of the hip develop secondary osteoarthritis and eventually end up with total hip arthroplasty(THA) at younger age. Because of altered anatomy of dysplastic hips, THA in these patients represents technically demanding procedure. Distorted anatomy of the acetabulum and proximal femur together with conjoined leg length discrepancy present major challenges during performing THA in patients with developmental dysplasia of the hip. In addition, most patients are at younger age, therefore, soft tissue balance is of great importance(especially the need to preserve the continuity of abductors) to maximise postoperative functional result. In this paper we present a variety of surgical techniques availablefor THA in dysplastic hips, their advantages and disadvantages. For acetabular reconstruction following techniques are described: Standard metal augments(prefabricated), Custom made acetabular augments(3D printing), Roof reconstruction with vascularized fibula, Roof reconstruction with pedicled iliac graft, Roof reconstruction with autologous bone graft, Roof reconstruction with homologous bone graft, Roof reconstruction with auto/homologous spongious bone, Reinforcement ring with the hook in combination with autologous graft augmentation, Cranial positioning of the acetabulum, Medial protrusion technique(cotyloplasty) with chisel, Medial protrusion technique(cotyloplasty) with reaming, Cotyloplasty without spongioplasty. For femoral reconstruction following techniques were described: Distraction with external fixator, Femoral shortening through a modified lateral approach, Transtrochanteric osteotomies, Paavilainen osteotomy, Lesser trochanter osteotomy, Double-chevron osteotomy, Subtrochanteric osteotomies, Diaphyseal osteotomies, Distal femoral osteotomies. At the end we present author's treatment method of choice: for acetabulum we perform cotyloplasty leaving only paper-thin medial wall, which we break during acetabular cup impacting. For femoral side first we peel of all rotators and posterior part of gluteus medius and vastus lateralis from greater trochanter on the very thin flake of bone. This method allows us to adequately shorten proximal femoral stump, with possibility of additional resection of proximal femur. Furthermore, several advantages and disadvantages of this procedure are also discussed.

Instability after total hip arthroplasty

Instability following total hip arthroplasty(THA) is an unfortunately frequent and serious problem that requires thorough evaluation and preoperative planning before surgical intervention. Prevention through optimal index surgery is of great importance, as the management of an unstable THA is challenging even for an experienced joints surgeon. However, even after well-planned surgery, a significant incidence of recurrent instability still exists. Non-operative management is often successful if the components are well-fixed and correctly positioned in the absence of neurocognitive disorders. If conservative management fails, surgical options include revision of malpositioned components; exchange of modular components such as the femoral head and acetabular liner; bipolar arthroplasty; tripolar arthroplasty; use of a larger femoral head; use of a constrained liner; soft tissue reinforcement and advancement of the greater trochanter.