Slickwater fracturing fluids are widely used in the development of unconventional oil and gas resources due to the advantages of low cost,low formation damage and high drag reduction performance.However,their performa...Slickwater fracturing fluids are widely used in the development of unconventional oil and gas resources due to the advantages of low cost,low formation damage and high drag reduction performance.However,their performance is severely affected at high temperatures.Drag reducing agent is the key to determine the drag reducing performance of slickwater.In this work,in order to further improve the temperature resistance of slickwater,a temperature-resistant polymeric drag reducing agent(PDRA)was synthesized and used as the basis for preparing the temperature-resistant slickwater.The slickwater system was prepared with the compositions of 0.2 wt%PDRA,0.05 wt%drainage aid nonylphenol polyoxyethylene ether phosphate(NPEP)and 0.5 wt%anti-expansion agent polyepichlorohydrindimethylamine(PDM).The drag reduction ability,rheology properties,temperature and shear resistance ability,and core damage property of slickwater were systematically studied and evaluated.In contrast to on-site drag reducing agent(DRA)and HPAM,the temperature-resistant slickwater demonstrates enhanced drag reduction efficacy at 90℃,exhibiting superior temperature and shear resistance ability.Notably,the drag reduction retention rate for the slickwater achieved an impressive 90.52%after a 30-min shearing period.Additionally,the core damage is only 5.53%.We expect that this study can broaden the application of slickwater in high-temperature reservoirs and provide a theoretical basis for field applications.展开更多
Due to the low water-cement ratio of ultra-high-performance concrete(UHPC),fluidity and shrinkage cracking are key aspects determining the performance and durability of this type of concrete.In this study,the effects ...Due to the low water-cement ratio of ultra-high-performance concrete(UHPC),fluidity and shrinkage cracking are key aspects determining the performance and durability of this type of concrete.In this study,the effects of different types of cementitious materials,chemical shrinkage-reducing agents(SRA)and steel fiber(SF)were assessed.Compared with M2-UHPC and M3-UHPC,M1-UHPC was found to have better fluidity and shrinkage cracking performance.Moreover,different SRA incorporation methods,dosage and different SF types and aspect ratios were implemented.The incorporation of SRA and SF led to a decrease in the fluidity of UHPC.SRA internal content of 1%(NSRA-1%),SRA external content of 1%(WSRA-1%),STS-0.22 and STE-0.7 decreased the fluidity of UHPC by 3.3%,8.3%,9.2%and 25%,respectively.However,SRA and SF improved the UHPC shrinkage cracking performance.NSRA-1%and STE-0.7 reduced the shrinkage value of UHPC by 40%and 60%,respectively,and increased the crack resistance by 338%and 175%,respectively.In addition,the addition of SF was observed to make the microstructure of UHPC more compact,and the compressive strength and flexural strength of 28 d were increased by 26.9%and 19.9%,respectively.展开更多
Objective:To produce a technique for the growth of Campylobacter jejuni in aerobic condition Methods:Different combinations of reducing agents were tested in brucella broth and the growth turbidity was compared with t...Objective:To produce a technique for the growth of Campylobacter jejuni in aerobic condition Methods:Different combinations of reducing agents were tested in brucella broth and the growth turbidity was compared with tubes containing normal broth only.Microaerophilic environment was also provided in a petri plate seeded with Campylobacter culture by pouring 3 different concentrations（10%,5%and 2.5%） of five reducing agents along with bacto-agar in the lid which was used to cover and seal the culture plate.Six reducing agents were also added in broth in concentration of 0.25 mg/mL of each with different combinations.Results:In lid agar technique,Campylobacter jejuni growth appeared in all three concentrations of reducing agents, that is 10%,5%and 2.5%after 24 hours of incubation but the best results were observed in 10% concentration.The colonial and morphological characters were not affected when the organisms were grown by this technique.Conclusions:It was found that reducing agents enhance the growth of C.jejuni/coli.In combination of FeSO<sub>4</sub>,Na<sub>2</sub>CO<sub>3</sub> with H<sub>3</sub>BO<sub>3</sub> worked as ideal mixture for the aerobic growth of Campylobacter.This technique is more economical as compared to commercially available media in the market and can be used for the oral facultative and microaerophilic bacterial growth in laboratory.展开更多
In order to improve the plugging and anti-collapse performance of water-based drilling fluid,a polymer film-forming plugging agent LWFD is synthesized by emulsion polymerization.The effect of the agent on rheology,API...In order to improve the plugging and anti-collapse performance of water-based drilling fluid,a polymer film-forming plugging agent LWFD is synthesized by emulsion polymerization.The effect of the agent on rheology,API filtration loss,lubricity and film plugging of polymer drilling fluid and cationic drilling fluid is evaluated in laboratory.The experimental results show that the agent has little effect on the rheology and filtration loss of polymer drilling fluid and cationic drilling fluid,and can improve the lubricity of drilling fluid.The synthesized polymer film-forming plugging agent LWFD has good plugging properties for sand discs with different permeabilities,and the agent can effectively improve the film-forming plugging and temperature resistance of drilling fluid when combined with the inorganic nano-plugging agent NMFD.The high performance polymer drilling fluid formed by introducing polymer film-forming plugging agent LWFD and inorganic nano-plugging agent NMFD into polymer drilling fluid has comparable performance as Halliburton’s SHALEDRIL high performance drilling fluid,which can meet the requirements of on-site drilling and has application value.展开更多
Beach titanomagnetite(TTM)provides a cheap alternative source of Fe and Ti,but this ore is difficult to process to make suitable concentrates for the blast furnace.Recently studies showed that it is feasible to separa...Beach titanomagnetite(TTM)provides a cheap alternative source of Fe and Ti,but this ore is difficult to process to make suitable concentrates for the blast furnace.Recently studies showed that it is feasible to separate Fe and Ti by coal-based direct reduction.In this study,beach TTM was selected as the research object,the effects of reducing agents on reducing atmosphere in coal-based direct reduction of beach TTM were analyzed,and the role of volatiles was also studied.The results showed that when bitumite and coke were used as reducing agents of TTM,the CO produced from volatiles was involved in the reduction reaction,and the generated CO_(2) provided the raw material for the reaction of TTM.The reduction effect of bitumite was better than that of coke.The reason is that bitumite+TTM had a higher gas generation rate and produced a higher CO partial pressure,while coke+TTM had a lower gas generation rate and produced a lower CO partial pressure.When graphite was used as a reducing agent,there was a solid-solid reaction in the early stage in the reaction.With the continuous accumulation of CO_(2),the Boudouad reaction started and accelerated.Graphite+TTM also produced a higher CO partial pressure.展开更多
The effect of reducing agents and surfactants on controlling the silver nanoplates was studied. Two reducing agents, trisodium citrate dehydrate (TSC) and potassium tartrate, were used to reduce the AgNO3 solution. In...The effect of reducing agents and surfactants on controlling the silver nanoplates was studied. Two reducing agents, trisodium citrate dehydrate (TSC) and potassium tartrate, were used to reduce the AgNO3 solution. In this redox system, polyvinylpyrrolidone (PVP), sodium dodecyl sulfate (SDS) and arabic gum were served as surfactants. The results showed that reducing agents and surfactants both act as the capping agent adhering to the certain facets of silver seeds to block this surface to grow. The relative intensity of reducing agents also takes an active part in influencing the growth rate and direction of silver seeds. It was also found that halides can accelerate the speed of Ostwald ripening by adding Cl?, Br? and I?into the aqueous and have some effects on the morphology of the nanoplates.展开更多
The increasing consumption of plastics inevitably results in increasing amounts of waste plastics. Because of their long degradation periods, these wastes negatively affect the natural environment. Numerous studies ha...The increasing consumption of plastics inevitably results in increasing amounts of waste plastics. Because of their long degradation periods, these wastes negatively affect the natural environment. Numerous studies have been conducted to recycle and eliminate waste plastics. The potential for recycling waste plastics in the iron and steel industry has been underestimated; the high C and H contents of plastics may make them suitable as alternative reductants in the reduction process of iron ore. This study aims to substitute plastic wastes for coal in reduction melting process and to investigate their performance during reduction at high temperature. We used a common type of waste plastic, polyethylene terephthalate （PET）, because of its high carbon and hydrogen contents. Composite pellets containing PET wastes, coke, and magnetite iron ore were reduced at selected temperatures of 1400 and 1450℃ for reduction time from 2 to 10 min to investigate the reduction melting behavior of these pellets. The results showed that an increased temperature and reduction time increased the reduction ratio of the pellets. The optimum experimental conditions for obtaining metallic iron （iron nuggets） were reduction at 1450℃ for 10 min using composite pellets containing 60% PET and 40% coke.展开更多
The preparation of stable, uniformed silver nanoparticles by the reduction of silver ions using albumin is reported in the present paper. It is a simple process for obtaining silver nanoparticles. The samples have bee...The preparation of stable, uniformed silver nanoparticles by the reduction of silver ions using albumin is reported in the present paper. It is a simple process for obtaining silver nanoparticles. The samples have been characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM), which reveal the nature of the nanoparticles. These studies conclude that the particles are mostly spherical in shape and have an average size of 26 nm. The UV-vis spectra show that an absorption band, occurred because of the Surface Plasmon Resonance, existing at 443 nm;the Thermogravimetric Analysis (TGA) shows that only 2% of the weight is organic matter. The average particle size was measured with a Nanosizer DLS.展开更多
Drag reduction phenomenon in pipelines has received lots of attention during the past decades due to its potential engineering applications, especially in fluid transporting industries. Various methods to enhance drag...Drag reduction phenomenon in pipelines has received lots of attention during the past decades due to its potential engineering applications, especially in fluid transporting industries. Various methods to enhance drag reduction have been developed throughout the years and divided into two categories;non-additives method and additives method. Both categories have different types of methods, with different formulations and applications which will generally be discussed in this review. Among all the methods discussed, drag reduction using polymer additive is as one of the most enticing and desirable methods. It has been the subject of research in this field and has been studied extensively for quite some time. It is due to its ability to reduce drag up to 80% when added in minute concentrations. Reducing drag in the pipe will require less pumping power thus offering economic relieves to the industries. So, this paper will be focusing more on the use of polymer additives as drag reducing agent, the general formulations of the additives, major issues involving the use of drag reducing polymers, and the potential applications of it. However, despite the extensive works of drag reduction polymer, there are still no models that accurately explain the mechanism of drag reduction. More studies needed to be done to have a better understanding of the phenomenon. Therefore, future research areas and potential approaches are proposed for future work.展开更多
基金supported by the National Natural Science Foundation of China(Nos.52222403,52074333,52120105007)Taishan Scholar Young Expert(No.tsqn202211079)。
文摘Slickwater fracturing fluids are widely used in the development of unconventional oil and gas resources due to the advantages of low cost,low formation damage and high drag reduction performance.However,their performance is severely affected at high temperatures.Drag reducing agent is the key to determine the drag reducing performance of slickwater.In this work,in order to further improve the temperature resistance of slickwater,a temperature-resistant polymeric drag reducing agent(PDRA)was synthesized and used as the basis for preparing the temperature-resistant slickwater.The slickwater system was prepared with the compositions of 0.2 wt%PDRA,0.05 wt%drainage aid nonylphenol polyoxyethylene ether phosphate(NPEP)and 0.5 wt%anti-expansion agent polyepichlorohydrindimethylamine(PDM).The drag reduction ability,rheology properties,temperature and shear resistance ability,and core damage property of slickwater were systematically studied and evaluated.In contrast to on-site drag reducing agent(DRA)and HPAM,the temperature-resistant slickwater demonstrates enhanced drag reduction efficacy at 90℃,exhibiting superior temperature and shear resistance ability.Notably,the drag reduction retention rate for the slickwater achieved an impressive 90.52%after a 30-min shearing period.Additionally,the core damage is only 5.53%.We expect that this study can broaden the application of slickwater in high-temperature reservoirs and provide a theoretical basis for field applications.
基金the Key Research and Development Program of Hubei Province(2022BCA082 and 2022BCA077).
文摘Due to the low water-cement ratio of ultra-high-performance concrete(UHPC),fluidity and shrinkage cracking are key aspects determining the performance and durability of this type of concrete.In this study,the effects of different types of cementitious materials,chemical shrinkage-reducing agents(SRA)and steel fiber(SF)were assessed.Compared with M2-UHPC and M3-UHPC,M1-UHPC was found to have better fluidity and shrinkage cracking performance.Moreover,different SRA incorporation methods,dosage and different SF types and aspect ratios were implemented.The incorporation of SRA and SF led to a decrease in the fluidity of UHPC.SRA internal content of 1%(NSRA-1%),SRA external content of 1%(WSRA-1%),STS-0.22 and STE-0.7 decreased the fluidity of UHPC by 3.3%,8.3%,9.2%and 25%,respectively.However,SRA and SF improved the UHPC shrinkage cracking performance.NSRA-1%and STE-0.7 reduced the shrinkage value of UHPC by 40%and 60%,respectively,and increased the crack resistance by 338%and 175%,respectively.In addition,the addition of SF was observed to make the microstructure of UHPC more compact,and the compressive strength and flexural strength of 28 d were increased by 26.9%and 19.9%,respectively.
文摘Objective:To produce a technique for the growth of Campylobacter jejuni in aerobic condition Methods:Different combinations of reducing agents were tested in brucella broth and the growth turbidity was compared with tubes containing normal broth only.Microaerophilic environment was also provided in a petri plate seeded with Campylobacter culture by pouring 3 different concentrations（10%,5%and 2.5%） of five reducing agents along with bacto-agar in the lid which was used to cover and seal the culture plate.Six reducing agents were also added in broth in concentration of 0.25 mg/mL of each with different combinations.Results:In lid agar technique,Campylobacter jejuni growth appeared in all three concentrations of reducing agents, that is 10%,5%and 2.5%after 24 hours of incubation but the best results were observed in 10% concentration.The colonial and morphological characters were not affected when the organisms were grown by this technique.Conclusions:It was found that reducing agents enhance the growth of C.jejuni/coli.In combination of FeSO<sub>4</sub>,Na<sub>2</sub>CO<sub>3</sub> with H<sub>3</sub>BO<sub>3</sub> worked as ideal mixture for the aerobic growth of Campylobacter.This technique is more economical as compared to commercially available media in the market and can be used for the oral facultative and microaerophilic bacterial growth in laboratory.
基金Project of National Natural Science Foundation of China“Research on Shale Wellbore Stability and Fracture Mechanism under Shale Gas Development Conditions”(51174036).
文摘In order to improve the plugging and anti-collapse performance of water-based drilling fluid,a polymer film-forming plugging agent LWFD is synthesized by emulsion polymerization.The effect of the agent on rheology,API filtration loss,lubricity and film plugging of polymer drilling fluid and cationic drilling fluid is evaluated in laboratory.The experimental results show that the agent has little effect on the rheology and filtration loss of polymer drilling fluid and cationic drilling fluid,and can improve the lubricity of drilling fluid.The synthesized polymer film-forming plugging agent LWFD has good plugging properties for sand discs with different permeabilities,and the agent can effectively improve the film-forming plugging and temperature resistance of drilling fluid when combined with the inorganic nano-plugging agent NMFD.The high performance polymer drilling fluid formed by introducing polymer film-forming plugging agent LWFD and inorganic nano-plugging agent NMFD into polymer drilling fluid has comparable performance as Halliburton’s SHALEDRIL high performance drilling fluid,which can meet the requirements of on-site drilling and has application value.
基金Project(52104257)supported by the National Natural Science Foundation of China。
文摘Beach titanomagnetite(TTM)provides a cheap alternative source of Fe and Ti,but this ore is difficult to process to make suitable concentrates for the blast furnace.Recently studies showed that it is feasible to separate Fe and Ti by coal-based direct reduction.In this study,beach TTM was selected as the research object,the effects of reducing agents on reducing atmosphere in coal-based direct reduction of beach TTM were analyzed,and the role of volatiles was also studied.The results showed that when bitumite and coke were used as reducing agents of TTM,the CO produced from volatiles was involved in the reduction reaction,and the generated CO_(2) provided the raw material for the reaction of TTM.The reduction effect of bitumite was better than that of coke.The reason is that bitumite+TTM had a higher gas generation rate and produced a higher CO partial pressure,while coke+TTM had a lower gas generation rate and produced a lower CO partial pressure.When graphite was used as a reducing agent,there was a solid-solid reaction in the early stage in the reaction.With the continuous accumulation of CO_(2),the Boudouad reaction started and accelerated.Graphite+TTM also produced a higher CO partial pressure.
基金Project(51373097)supported by The National Natural Science Foundation of China
文摘The effect of reducing agents and surfactants on controlling the silver nanoplates was studied. Two reducing agents, trisodium citrate dehydrate (TSC) and potassium tartrate, were used to reduce the AgNO3 solution. In this redox system, polyvinylpyrrolidone (PVP), sodium dodecyl sulfate (SDS) and arabic gum were served as surfactants. The results showed that reducing agents and surfactants both act as the capping agent adhering to the certain facets of silver seeds to block this surface to grow. The relative intensity of reducing agents also takes an active part in influencing the growth rate and direction of silver seeds. It was also found that halides can accelerate the speed of Ostwald ripening by adding Cl?, Br? and I?into the aqueous and have some effects on the morphology of the nanoplates.
基金financially supported by Yildiz Technical University Scientific Research Projects Coordination Department (No. 2011-07-02-KAP02)
文摘The increasing consumption of plastics inevitably results in increasing amounts of waste plastics. Because of their long degradation periods, these wastes negatively affect the natural environment. Numerous studies have been conducted to recycle and eliminate waste plastics. The potential for recycling waste plastics in the iron and steel industry has been underestimated; the high C and H contents of plastics may make them suitable as alternative reductants in the reduction process of iron ore. This study aims to substitute plastic wastes for coal in reduction melting process and to investigate their performance during reduction at high temperature. We used a common type of waste plastic, polyethylene terephthalate （PET）, because of its high carbon and hydrogen contents. Composite pellets containing PET wastes, coke, and magnetite iron ore were reduced at selected temperatures of 1400 and 1450℃ for reduction time from 2 to 10 min to investigate the reduction melting behavior of these pellets. The results showed that an increased temperature and reduction time increased the reduction ratio of the pellets. The optimum experimental conditions for obtaining metallic iron （iron nuggets） were reduction at 1450℃ for 10 min using composite pellets containing 60% PET and 40% coke.
文摘The preparation of stable, uniformed silver nanoparticles by the reduction of silver ions using albumin is reported in the present paper. It is a simple process for obtaining silver nanoparticles. The samples have been characterized by X-ray diffraction (XRD) and transmission electron microscopy (TEM), which reveal the nature of the nanoparticles. These studies conclude that the particles are mostly spherical in shape and have an average size of 26 nm. The UV-vis spectra show that an absorption band, occurred because of the Surface Plasmon Resonance, existing at 443 nm;the Thermogravimetric Analysis (TGA) shows that only 2% of the weight is organic matter. The average particle size was measured with a Nanosizer DLS.
基金supported by the Ministry of Higher Education, Malaysia [grant number FRG0416-TK-1/2015]UMSGreat funding from Universiti Malaysia Sabah [grant number GUG0052-TK2/2016]
文摘Drag reduction phenomenon in pipelines has received lots of attention during the past decades due to its potential engineering applications, especially in fluid transporting industries. Various methods to enhance drag reduction have been developed throughout the years and divided into two categories;non-additives method and additives method. Both categories have different types of methods, with different formulations and applications which will generally be discussed in this review. Among all the methods discussed, drag reduction using polymer additive is as one of the most enticing and desirable methods. It has been the subject of research in this field and has been studied extensively for quite some time. It is due to its ability to reduce drag up to 80% when added in minute concentrations. Reducing drag in the pipe will require less pumping power thus offering economic relieves to the industries. So, this paper will be focusing more on the use of polymer additives as drag reducing agent, the general formulations of the additives, major issues involving the use of drag reducing polymers, and the potential applications of it. However, despite the extensive works of drag reduction polymer, there are still no models that accurately explain the mechanism of drag reduction. More studies needed to be done to have a better understanding of the phenomenon. Therefore, future research areas and potential approaches are proposed for future work.
