Analyzing an UWB Bandpass Filter for High Power Applications Using Rectangular Coaxial Cables with Square Inner Conductors

Using the finite element method (FEM) in two dimensions and the CST MICROWAVE STUDIO? (CST MWS) Transient Solver, the electromagnetic (EM) analysis and the design of a novel compact ultra wideband (UWB) bandpass filter using rectangular coaxial cables with square inner conductors, convenient for high power applications, are presented. The design of the UWB BP filter is based on the use of impedance steps and coupled-line sections. The center frequency around 6.85 GHz was selected, the bandwidth is between 3-10 GHz, the insertion-loss amounts to around 0.35 dB and the return loss is found higher than 10 dB in a large frequency range (4-9.5) GHz. The simulated results of stopband performances are better than 15 dB for a frequency range up to 11 GHz. For the selected center frequency and on a substrate with a dielectric constant of 2.03, the rectangular coaxial cables BPF with square inner conductors is only 6.7 × 8.9 × 33.4 mm in size.

Temporal-Spatial Variation of Surface Suspended Matter and Controlling Factors in the Inner Shelf of the East China Sea in Winter

Based on the observed surface suspended matter in the East China Sea in February 2007 and June 2015, an empirical model was established using L1 b's band 4 data to retrieve surface suspended matter from the Moderate Resolution Imagine Spectroradiometer Terra imagery. The squared correlation coefficient is 0.8358, and the root mean square error is 0.4285 mg L-1. The model reflects the distribution characteristics of surface suspended matter in the inner shelf of the East China Sea. In this paper, the satellite images of the study area were retrieved in January from 2001 to 2015, and the monthly distribution of surface suspended matter were obtained. The inter-annual distribution of the study area is similar, and the concentration of surface suspended matter is higher near the shore than offshore. A large amount of surface suspended matter is transported southeast under the influence of Zhejiang and Fujian coastal current and Taiwan warm current. Only a small amount of surface suspension can reach the Kuroshio area. The surface suspended matter concentration changes obviously near the estuary because of the effect of differences in the flux of the Yangtze River. Meanwhile, winter monsoon, temperature front, El Ni?o events, and other factors affect the distribution of surface suspended matter in 100 m isobath to coastal water but minimally influence the distribution in 100 m isobath to deep sea.

内蒙古中部四子王旗大庙岩体时代及成因

华北北缘的内蒙古中部地区出露大量晚古生代-早中生代花岗岩类,在空间上构成一条巨大的东西向花岗岩带。四子王旗大庙岩体作为一个典型的代表,以花岗闪长岩为主,其内部普遍发育暗色微粒包体(MMEs),是认识花岗岩岩石成因和演化的关键。本文对包体及寄主岩进行了同位素测年、岩相学、矿物化学、全岩主量元素和微量元素分析。寄主岩石中的锆石LA-ICPMS U-Pb年龄平均为265±7Ma(2σ),包体中单颗粒黑云母Rb-Sr年龄为253±5Ma(MSWD=0.85),属晚二叠世-早三叠世岩浆活动的产物。包体具塑性外形及岩浆结构,存在多种不平衡矿物组合;MME中的斜长石An组分及黑云母斑晶中MgO成分呈多期震荡,同时总体上均显示出幔部高于核、边部的特征,暗示斑晶可能为围岩捕虏晶,这种相似的成分变化指示包体与寄主岩相互作用引起的结晶环境改变,标志着岩浆成分的变化,是岩浆混合的标志之一;主量和微量数据进一步证明岩体的岩浆混合成因。Rb/Sr-K/Rb变化关系反映包体非结晶分异或黑云母堆晶的产物,而Ce/Pb-Ce、Ba-δEU和P_2O_5-δEu图及其他微量元素比值图等均表明花岗闪长岩体发生了岩浆混合作用,这也得到岩浆物理化学条件的支持。岩浆底侵和岩浆混合作用是该区岩体形成的主要机制和方式。岩石地球化学特征表明该岩体不同于加厚地壳和俯冲洋壳熔融的TTG和埃达克质岩石,而黑云母矿物化学和岩石地球化学显示其构造背景很可能为同碰撞环境。

中亚-蒙古造山带东段的锡林郭勒杂岩:早华力西期造山作用的产物而非古老陆块?——锆石SHRIMP U-Pb年代学证据

锡林郭勒杂岩是华北板块北缘古生代褶皱带内出露面积最大的变质岩系,以前多被当着前寒武纪的古老地块。本文通过对该杂岩中副片麻岩和正片麻岩的锆石SHRIMP U-Pb年代学研究发现,副片麻岩中的锆石多为岩浆锆石,其^(206)Pb/^(238)U加权平均年龄为406±7Ma,指示它们的原岩主要是由近同期(略早些)的岩浆岩风化后就近沉积的产物,该年龄应代表源区(岛弧型?)花岗岩的形成时间,同时也是副片麻岩原岩沉积的下限年龄。正片麻岩中岩浆锆石的^(206)Pb/^(238)U加权平均年龄为382±2Ma,代表花岗片麻岩原岩的侵位年龄。岩石中锆石的变质增生边的形成年龄为337±6Ma,代表锡林郭勒杂岩发生变质和变形的时间,该变质事件可能与贺根山缝合带内所发生的一次主要的碰撞造山作用有关。这些年龄资料充分说明,锡林郭勒杂岩并非古老地块,而是华力西早期岩浆作用、沉积作用和变质作用事件的产物.整个事件是在较短的时间范围内(～70Ma)完成的,推测该杂岩发育在碰撞造山带的弧前环境。中亚-蒙古造山带东南部(内蒙古的中、东部)碰撞前的构造格局可能不是典型的多岛洋体制,由于缺少古老的陆块,造山过程更多的表现为大洋的大陆化过程,即洋内俯冲形成岛弧,岛弧在被动大陆边缘拼贴聚合转化为新的大陆。

Influences of the inner diameter of the solid shielding tube on the characteristics of the radio-frequency cold atmospheric plasma jet

Active control of the local environment of the cold atmospheric plasma(CAP) jet is of great importance in actual applications since the CAP operates in an open atmosphere with the inevitable entrainment of the surrounding cold air. In this paper, the solid shielding effects of the cylindrical quartz tubes with different inner diameters on the characteristics of the CAP jets driven by a radio-frequency(RF) power supply are studied experimentally. The experimental results show that the total length of the shielded plasma jet can be increased significantly by an appropriate combination of the quartz tube inner diameter and that of the plasma generator nozzle exit with other parameters being unchanged. This phenomenon may be qualitatively attributed to the loss of diffusion of the charged particles in the radial direction under different inner diameters of the quartz tubes. Compared with the plasma free jet, the plasma shielding jet is produced with optimized parameters including longer plasma jet length, higher concentrations of chemically reactive species, higher rotational, vibrational, and electron excitation temperatures when the inner diameters of the solid shielding tube and the generator nozzle exit are the same. A maximum plasma jet length of 52.0 cm is obtained in contrast to that of 5.0 cm of the plasma free jet in this study. The experimental results indicate that the solid shielding effect provides a new method for the active control of the local environment of the RF-CAP jet operating in an open atmosphere.

Extended Anode Effect for Tube Inner Coating of Non-Conductive Ceramics by Pulsed Coaxial Magnetron Plasma

For uniform tube inner coating of non-conductive thin films, the double-ended coaxial magnetron pulsed plasma (DCMPP) method was investigated. In this study, coating of TiN and TiO2 was performed. It was clearly shown that the extended anode effect was strongly influenced by the electric resistance of the coated thin films on the inner surface of an insulator tube. Additionally, high frequency (100 kHz) was better for relatively high plasma density. On the other hand, in the case of titanium oxide deposition, negative ion productions drastically decrease the deposition rate and the shifting velocity of plasma main position for coated TiO2 films.

Numerical Simulation of Double Diffusive Mixed Convection in a Horizontal Annulus with Finned Inner Cylinder

The present work relates to a numerical investigation of double diffusive mixed convection around a horizontal annulus with a finned inner cylinder.The solutal and thermal buoyancy forces are sustained by maintaining the inner and outer cylinders at uniform temperatures and concentrations.Buoyancy effects are also considered,with the Boussinesq approximation.The forced convection effect is induced by the outer cylinder rotating with an angular velocity(ω)in an anti-clockwise direction.The studies are made for various combinations of dimensionless numbers;buoyancy ratio number(N),Lewis number(Le),Richardson number(Ri)and Grashof number(Gr).The isotherms,isoconcentrations and streamlines as well as both average and local Nusselt and Sherwood numbers were studied.A finite volume scheme is adopted to solve the transport equations for continuity,momentum,energy and mass transfer.The results indicate that the use of fins on the inner cylinder with outer cylinder rotation,significantly improves the heat and mass transfer in the annulus.

Heinrich events recorded in a loess-paleosol sequence from Hexigten,Inner Mongolia

We describe the last glaciation climatic history Marine Isotope Stage(MIS, 2-4) from 66.7 ka to 14.5 ka in Hexigten, northeast Inner Mongolia, North China. The climate of the region experienced frequent and significant fluctuations between dry-cold and less dry-cold during the late MIS4. The climate was generally warm and humid during early MIS3(MIS3 c) and late MIS3(MIS3 a), whereas it was cold and dry in middle MIS3(MIS3 b) and during MIS2. In this study, the cold and dry conditions were correlated with a stronger East Asian winter monsoon and strong dune activity; whereas, warm and humid conditions were related to a stronger East Asian summer monsoon(EASM) and weak dune activity. This study establishes six distinct dry and cold intervals during the last glacial period(66.7-14.5 ka) based on optically stimulated luminescence data, multi-proxies record(magnetic susceptibility, grain size analysis, Rb/Sr, SiO2/TiO2) and chemical index of alteration(CIA). The last glacial period may be correlated with Heinrich events 1 to 6 which were further confirmed by comparison with the Hulu cave stalagmites and Greenland ice core records. It is concluded that the study area was substantially affected by the EASM, as compared with the loess-desert transition zone of the Chinese Loess Plateau, especially in MIS3 c and suggested that the East Asian monsoon played a pivotal role in the last glacial period climate and dune activity.

内蒙古东北地区上古生界伊利石研究

内蒙古东北地区上古生界主要是一套泥质岩石,其详细深入的矿物学工作尚不多见。本文利用JSM-6700F场发射电镜及INCA能谱仪,探讨了伊利石在成岩-极低级变质作用过程中的行为。采用D/max-2500 X-射线衍射仪,研究了伊利石的结晶度、多型和b_0值。伊利石结晶度变化于0.28～0.77,除去构造应力对伊利石结晶度指数值的影响,研究区伊利石结晶度指数应>0.34,反映晚古生代地层主体属于晚期成岩带和低级近变质带。伊利石(白云母)多型分三种类型,分别是1M_d型、1M_d+2M_1混合型和2M_1型,是晚期成岩带和低级近变质带的产物。伊利石(白云母)b_0值变化于8.9892A～9.0404A之间,b_0平均值9.0196A,属中压相。

Achievements of Truss Models for Reinforced Concrete Structures

Achievements are presented for truss models of RC structures developed in previous years: 1. Two constitutive models, biaxial and triaxial, are based on regular trusses, with bars obeying nonlinear uniaxial σ-ε laws of material under simulation;both models have been compared with test results and show a dependence of Poisson ratio on curvature of σ-ε law. 2. A truss finite element has been used in the nonlinear static and dynamic analysis of plane RC frames;it has been compared with test results and describes, in a simple way, the formation of plastic hinges. 3. Thanks to the very simple geometry of a truss, the equilibrium equations can be easily written and the stiffness matrix can be easily updated, both with respect to the deformed truss, within each step of a static incremental loading or within each time step of a dynamic analysis, so that to take into account geometric nonlinearities. So the confinement of a RC column is interpreted as a structural stability effect of concrete. And a significant role of the transverse reinforcement is revealed, that of preventing, by its close spacing and sufficient amount, the buckling of inner longitudinal concrete struts, which would lead to a global instability of the RC column. 4. The proposed truss model is statically indeterminate, so it exhibits some features, which are not met by the “strut-and-tie” model.

A Study on the Structural Response of a PSC Inner Containment Dome with Large Openings Due to Prestress Transfer

A linear three dimensional finite element (FE) study has been carried out to examine the structural response of a prestressed concrete (PSC) inner containment (IC) dome of reactor building (double containment system) of a typical Indian Nuclear Power Plant, having large steam generator (SG) openings with due emphasis on the local behaviour of the steel-concrete interfaces at the SG openings, due to initial prestress transfer. The predominant thrust of the study has been placed on the objective of predicting the possibilities of separation at the steel-concrete interface zones adjacent to the embedded plates (EPs) of the SG openings. Two types of modeling and analysis have been made to study the overall and local behaviour of the structure. Prestressing ducts, passive reinforcements and EPs have been included in the models in certain ways. For the FE analysis, the interface zone has been modeled using interface elements, the properties of which were derived from the results of past experiments conducted on steel plate-concrete inter-face specimens. The FE analysis results have been compared with the results of the past two FE analytical studies on the linear behaviour of the same PSC IC dome. Important observations have been made regarding dome deformation and stresses throughout the structure with special emphasis on the local behaviour of steel-concrete interfaces at and around the SG openings.

内蒙古太平沟钼矿床流体包裹体特征及成矿动力学背景

太平沟斑岩型钼矿床位于大兴安岭北段,处于东西向古生代古亚洲构造成矿域和北北东向中新生代滨西太平洋构造成矿域的转换、叠合部位。该矿床形成于131.5～127.5Ma,是大陆内部构造-岩浆活化的产物,成矿系统发育于早白垩世初期华北及中国东部构造体制由挤压向伸展转变的背景下。太平沟钼矿的流体成矿过程包括早、中、晚3个阶段,分别以石英-黄铜矿-黄铁矿、石英-黄铁矿-辉钼矿和石英-碳酸盐组合为特征。石英中发育水溶液型、含/富CO_2型和含子矿物型流体包裹体,子矿物包括石盐、黄铜矿等,但晚阶段仅发育水溶液型包裹体。成矿早、中、晚各阶段流体包裹体的均一温度分别集中在320～390℃、240～320℃和140～200℃,盐度变化为从>66.8 wt%NaCl eqv.、2.4 wt%～33.8 wt%NaCl eqv.到<10 wt%NaCl eqv.。流体系统由早阶段的高温、高盐度、富CO_2的岩浆热液,经流体沸腾、CO_2逸失、温度降低等过程导致大量金属硫化物沉淀,演化为晚阶段低温、低盐度、贫CO_2的大气降水热液。

PROBLEMS AND COUNTERMEASURES FOR RESOURCES DEVELOPMENT AND ENVIRONMENTAL RENOVATION IN THE CONTIGUOUS AREA OF SHANXI,SHAANXI AND INNER MONGOLIA

The studied area consists of 16 counties belonging to 3 provinces or autonomous re-gion, which are Hequ, Baode, Pianguan and Xinxian counties of Shanxi Province; Yulin,Shenmu, Fugu, Hengshan, Jingbian and Dingbian counties of Shaanxi Province;Dongsheng, Tuoketuo, Qingshuihe counties and Yijinhuoluo, Dalate, Zhungeer banners

面向连接的P2P即时通信中继策略研究

P2P即时通信模型要求所有对等节点都能进行双向通信,但网络安全技术方案的实施,使得整个P2P通信域有了内网和外网的区分,并且外网节点不能向内网主动发起连接,故P2P双向心通信受到限制。本文分析并设计了一种高效的通信机制-小服务器节点(Small Service Peer)避免由第三方的通信中继服务所导致的延时。提出了内网中继判定算法,以优化处于同一内网节点之间通信的性能。试验表明,采用本文提出小服务器对等节点的通信机制和内网中继判定算法,在不改变下层网络结构和配置的条件下,可以显著降低P2P应用系统对中继服务器的依赖,并提高即时通信系统实时性。

Formation of the primary petroleum reservoir in Wumaying inner buried-hill of Huanghua Depression, Bohai Bay Basin, China

Well Yinggu 1 drilled on the tectonic belt of the Wumaying buried-hill in Huanghua Depression obtained non-H2S high-yield oil and gas flow from the Permian Lower Shihezi Formation sandstone. The oil and gas are derived from the Upper Paleozoic coal source rock, the petroleum reservoir is an inner buried-hill primary oil and gas accumulation, showing a good prospect of the Paleozoic inner buried-hill primary reservoir exploration. The formation and accumulation of the primary petroleum reservoir in the Wumaying inner buried-hill are discussed by studying the primary source conditions, the inner buried-hill reservoir-cap combinations and the hydrocarbon accumulation period. The primary petroleum reservoir has three preponderant characteristics of accumulation: secondary large-scale gas generation of coal source rock, multi reservoir-cap combinations and mainly late hydrocarbon charging, which formed the compound hydrocarbon accumulation of the above-source sandstone and under-source carbonate rock in the Paleozoic inner buried-hill. Along with the Mesozoic and Cenozoic tectonic activities, the formation of the primary reservoir in Wumaying inner buried-hill is characterized by "mixed oil and gas charge in local parts in early stage, adjustment accumulation due to structural high migration in middle stage, and large-scale natural gas charge and compound accumulation in late stage".

Opportunities of Inner Mongolia's economic development under the background of the “Silk Road Economic Belt”

"The Silk Road Economic Belt" is a great strategic thought, through which China deepens allround reform and opening up, especially in the major move of opening up to the west. Inner Mongolia autonomous region owns the superior geographical position and was closely related to the Silk Road in ancient times. In the new stage, Inner Mongolia autonomous region should seize the opportunity of the development strategy, and strive to develop economic construction under the background of the belt of Prairie Silk Road, and play an important role in the economic belt of the "Prairie Silk Road".

The Focal Depth Analysis of the Inner Mongolia-Ningxia Border Area Earthquakes

We selected the 103 M_L≥2. 5 earthquake waveform data from the Inner Mongolia-Ningxia border during 2009-2015,which was recorded by the Inner Mongolia Digital Seismic Networks and used the simplex method, Hyposat method, double difference location method,and deterministic method (PTD) for the determination of focal depth,and compared the results. The CAP moment tensor inversion method is used to determine the focal depths of the Alxa Left Banner M5. 8 and M4. 2 earthquakes. The final results of the focal depth by the deterministic method (PTD) and the double difference location method fit well with the tectonic characteristics of the Inner Mongolia-Ningxia border area,but those of the simplex method and the Hyposat method do not. The average depth of the Inner Mongolia-Ningxia border seismic tectonic zone is 13. 32 ± 8 km.

Study on the Moment Magnitude of Small and Moderate Earthquakes Located in the Inner Mongolia Region

Based on digital seismic waveform data from Inner Mongolia Digital Seismic Network,the source spectrum parameters of 182 small and moderate earthquakes from January,2009to September,2016 are derived,and the seismic momentmoment magnitude MW of the earthquakes are calculated.Theand the relationship between stress drop and magnitude are obtained using the linear regression method.It is clear that incorporating the moment magnitude into the seismic quick report catalog and the official earthquake catalog can enrich earthquake observation report content,thus providing better service for earthquake emergency and earthquake scientific research.

Research of precise pulse plasma arc powder welding technology of thin-walled inner hole parts

The inner hole parts played an oriented or supporting role in engineering machinery and equipment,which are prone to appear surface damages such as wear,strain and corrosion. The precise pulse plasma arc powder welding method is used for surface damage repairing of inner hole parts in this paper. The working principle and process of the technology are illustrated,and the microstructure and property of repairing layer by precise pulse plasma powder welding and CO2 gas shielded welding are tested and observed by microscope,micro hardness tester and X-ray residual stress tester etc. Results showed that the substrate deformation of thin-walled inner hole parts samples by precise pulse plasma powder welding is relatively small. The repair layer and substrate is metallurgical bonding,the transition zones( including fusion zone and heat affected zone) are relatively narrow and the welding quality is good. It showed that the thin-walled inner hole parts can be repaired by this technology and equipment.

“Go Green”—The New Mantra

Rising temperatures are causing melting of glaciers around the world.ShivaLingam,the most sacred pilgrimages of the Hindus,which formed naturally for thousands of years has melted due to unusual hot climatic conditions.In Indian tradition,the Earth is worshipped as the compassionate Mother Goddess. We need to take urgent affirmative collective measures as we have only"One Earth to Live On".