自行走履带式声反射罩

The paper is presented with the introduction to three styles of a coustic reflecting cover. And it illustrates the self-traveling caterpillar acou stic reflecting cover is a kind of improved acoustic equipment in modernized mul ti-functional theatres.

基于NOMA的共生反向散射通信的性能分析

非正交多址接入和环境反向散射通信是提高无线通信系统频谱效率的关键技术.针对能量受限问题,提出了一种基于瑞利衰落信道的下行非正交多址接入多路传输的共生反向散射通信系统.该系统由1个源节点S、1个反向散射设备BD和1个目的节点D组成.考虑到实际的非线性能量收集模型,在满足反射设备的能量因果约束的情况下,采用了一种最优动态反射系数以最大化反向散射信号的功率,推导了该系统中断概率的解析表达式,通过仿真验证了理论推导的正确性.仿真结果表明,反射设备电路的自身损耗对系统中断性能有重要影响.此外,通过仿真对比分析了基于非正交多址的共生反向散射通信系统和基于正交多址的共生反向散射通信系统性能,结果表明基于非正交多址的共生反向散射通信系统具有更好的中断性能.

Analysis on the Application and Improvement of Canopy without Sunshade Curtain

Nowadays,in order to expand the roof view to bring passengers closer to nature,more and more new energy vehicles are opting for canopy designs without sunshades.However,after removing traditional sunshades,new solutions must be sought to address issues such as heat insulation,glaring sunlight,and interior reflections from the roof glass during the summer months.This paper conducts an in-depth analysis of the technical advantages and shortcomings of sunshade-free canopy in terms of heat insulation and interior reflections during summer,from both theoretical analysis and experimental comparison perspectives,and proposes improvement strategies.The research results indicate that although the panoramic roof enhances the vehicle's interior view and technological appeal,it still has shortcomings in terms of heat insulation and the problem of interior reflections caused by direct sunlight.The proposed improvement strategies can effectively mitigate these issues,and offers consumers more comfortable and intelligent driving experiences.

Tree shrew models:A chronic social defeat model of depression and a one-trial captive conditioning model of learning and memory

Recent genome studies indicate that tree shrew is in the order or a closest sister of primates,and thus may be one of the best animals to model human diseases.In this paper,we report on a social defeat model of depression in tree shrew（Tupaia belangeri chinensis）.Two male tree shrews were housed in a pair-cage consisting of two independent cages separated by a wire mesh partition with a door connecting the two cages.After one week adaptation,the connecting door was opened and a brief fighting occurs between the two male tree shrews and this social conflict session consisted of 1 h direct conflict（fighting） and 23 h indirect influence（e.g.smell,visual cues） per day for 21 days.The defeated tree shrew was considered the subordinate.Compared with na？ve animals,subordinate tree shrews at the final week of social conflict session showed alterations in body weight,locomotion,avoidance behavior and urinary cortisol levels.Remarkably,these alterations persisted for over two weeks.We also report on a novel captive conditioning model of learning and memory in tree shrew.An automatic trapping cage was placed in a small closed room with a freely-moving tree shrew.For the first four trials,the tree shrew was not trapped when it entered the cage and ate the bait apple,but it was trapped and kept in the cage for 1 h on the fifth trial.Latency was defined as the time between release of the tree shrew and when it entered the captive cage.Latencies during the five trials indicated adaptation.A test trial 24 h later was used to measure whether the one-trial trapping during the fifth trial could form captive memory.Tree shrews showed much longer trapping latencies in the test trial than the adaptation trials.The N-methyl-d-aspartate（NMDA） receptor antagonist MK-801（0.2 mg/kg,i.p.）,known to prevent the formation of memory,did not affect latencies in the adaptation trails,but did block captive memory as it led to much shorter trapping latencies compared to saline treatment in the test trial.These results demonstrate a chronic social defeat model of depression and a novel one-trial captive conditioning model for learning and memory in tree shrews,which are important for mechanism studies of depression,learning,memory,and preclinical evaluation for new antidepressants.

Deghosting towed streamer data in τ/p domain based on rough sea surface reflectivity

Currently, the deghosting of towed streamer seismic data assumes a flat sea level and a sea-surface reflection coefficient of-1; this decreases the precision of deghosting. A new method that considers the rough sea surface is proposed to suppress ghost reflections. The proposed deghosting method obtains the rough sea surface reflection coefficient using Gaussian statistics, and calculates the optimized deghosting operator in the r/p domain. The proposed method is closer to the actual sea conditions, offers an improved deghosting operator, removes the ghost reflections from marine towed seismic data, widens the bandwidth and restores the low-frequency information, and finally improves the signal-to- noise ratio and resolution of the seismic data.

Effect of ground cover changes on solar radiation absorption in Three Northeastern Provinces of China

Background,aim,and scope Solar radiation is the main source of energy for terrestrial ecosystems.Small changes in the absorption of solar radiation at the ground surface can have a significant impact on the climatic environment.Natural and anthropogenic changes in ground cover are important factors affecting the absorption of solar radiation at the ground surface.This phenomenon is particularly pronounced in the mid and high latitudes.In order to quantify the inf luence of surface cover change on the absorption of solar radiation at the surface and to provide a scientific basis for changes in the climatic environment,this paper analyzed ground cover change,ground absorbed solar radiation change and the effect of ground cover change on ground absorbed solar radiation in the Three Northeastern Provinces of China from 2001 to 2018.Materials and methods In this study,the Three Northeastern Provinces of China were used as the study area.Firstly,satellite remote sensing data were used to obtain land cover data and albedo data for Aug.1st of each year in 2001,2005,2010,2015 and 2018.The albedo data were further used to calculate the absorbed solar radiation data at the ground surface.Next,the land cover data were used to count the area changes and shifts of different land classes over the five-year period.The land cover data were overlaid with the surface absorbed solar radiation data to obtain the mean and standard deviation of radiation absorption for different ground classes.The surface absorbed solar radiation data were subtracted to obtain the changes in surface absorbed solar radiation for 2001-2005,2005-2010,2010-2015 and 2015-2018.Ultimately,we used a combination of shifted changes in ground classes and changes in surface absorbed solar radiation data,with unchanged ground classes as a baseline and data such as slope orientation as an aid.We analyzed the effect of ground cover change on surface absorbed solar radiation at regional and pixel point scales.Results(1)The area of woodland and waters in the Three Northeastern Provinces of China increased and then decreased from 2001 to 2018,with an overall increase of 3.96%and 10.51%respectively.Cropland decreased and then increased,with a total decrease of 1.22%.Grassland continued to decrease,with an overall decrease of 19.36%.Building sites increased all the time,with a total increase of 11.08%.The main types of ground cover shifted were woodland,cropland and grassland.The main factors for the change in ground cover were China’s woodland protection policy and the saturation of the total woodland stock.(2)The five ground types absorb solar radiation in the order of waters>building sites>woodland>grassland>cropland.The surface absorption of solar radiation in the Songnen Plain,the Sanjiang Plain and the Songhua River Basin flowing through the Songnen Plain and the Sanjiang Plain varies significantly,by more than 25 W·m^(-2).(3)Changes in the ground cover type affected the absorption of solar radiation energy by the ground surface.There was a clear trend of interconversion between waters and cropland/grassland,cropland and woodland/grassland.In particular,the conversion of waters to both cropland and grassland radiation absorption values decreased significantly,while the opposite increased.The absolute difference between waters and cropland was a maximum of -156.66 W·m^(-2)in 2010-2015,and between waters and grassland was a maximum of 102.36 W·m^(-2) in 2005-2010.The radiative absorption values of woodland and grassland reclamation declined and conversely increased.The absolute difference between woodland and cropland was a maximum of-13.94 W·m^(-2) in 2010-2015 when woodland converted to cropland,and between grassland and cropland was a maximum of 22.36 W·m^(-2) in 2001-2005 when cropland converted to grassland,respectively.Discussion Ground cover changes in the Three Northeastern Provinces of China from 2001-2018 were inextricably linked to natural factors and the inf luence of Chinese national policies.The main inf luencing factors were China’s woodland protection policy,restoration of woodland fire sites,saturation of total woodland,optimization of cropland patterns,sanding of grassland,expansion of water conservancy projects,and urbanization expansion.There were differences in the radiation absorption characteristics of different ground cover types.This was due to the nature of the ground type itself and the regional environment.When ground cover types changed,their ability to absorb solar radiation also changed.The degree of change could be inf luenced by different ground types and different environmental factors.Different spatial scales can also produce variability.We need to consider the effects of ground cover change on the absorption of solar radiation at the surface in an integrated and comprehensive way.Conclusions The Three Northeastern Provinces of China had frequent changes in ground cover from 2001-2018,with the area of grassland decreased by almost 20%.These changes were due to natural environmental change and policies issued by China since the 21st century.The extent to which solar radiation was absorbed by different ground cover types was different,with grassland being the strongest and cropland the least.In the past few years,the Songnen Plain and Sanjiang Plain regions were the most significant changes in the absorption of solar radiation by the ground cover.The change in ground cover type led to a change in solar radiation absorption at the ground surface,with the conversion of waters to cropland or grassland and the conversion of cropland to woodland or grassland showing the greatest change in radiation absorption values,and vice versa.Of these,the absolute difference in the conversion of waters to cropland amounts to-156.66 W·m^(-2) in 2010-2015.The variation in the absorption of solar radiation at the ground surface was related to the characteristics of the ground class itself,but was also limited by the regional environment.Recommendations and perspectives This study showed that surface cover change can affect the absorption of solar radiation at the surface to varying degrees.The unchanged land classes were used as a comparative analysis in this paper,and it was clear from the paper that some of the unchanged land classes showed significant changes in radiation absorption that should be of interest in future studies.

Promotional roles of ZrO_2 and WO_3 in V_2O_5-WO_3/TiO_2-ZrO_2 catalysts for NO_x reduction by NH_3:Catalytic performance,morphology,and reaction mechanism

V2O5/TiO2-ZrO2 catalysts containing various amounts of WO3 were synthesized.The catalyst morphologies,catalytic performances,and reaction mechanisms in the selective catalytic reduction of NOx by NH3 were investigated using in situ diffuse-reflectance infrared Fourier-transform spectroscopy,temperature-programmed reduction（TPR）,X-ray diffraction,and the Brunauer-Emmett-Teller（BET） method.The BET surface area of the triple oxides increased with increasing ZrO2 doping but gradually decreased with increasing WO3 loading.Addition of sufficient WO3 helped to stabilize the pore structure and the combination of WO3 and ZrO2 improved dispersion of all the metal oxides.The mechanisms of reactions using V2O5-9%WO3/TiO2-ZrO2 and V2O5-9%WO3/TiO2were compared by using either a single or mixed gas feed and various pretreatments.The results suggest that both reactions followed the Eley-Ridel mechanism;however,the dominant acid sites,which depended on the addition of WO3 or ZrO2,determined the pathways for NOx reduction,and involved[NH4^＋-NO-Bronsted acid site]^＊ and[NH2-NO-Lewis acid site]^＊ intermediates,respectively.NH3-TPR and H2-TPR showed that the metal oxides in the catalysts were not reduced by NH3 and O2did not reoxidize the catalyst surfaces but participated in the formation of H2O and NO2.

Fracture identification based on remote detection acoustic reflection logging

Fracture identification is important for the evaluation of carbonate reservoirs. However, conventional logging equipment has small depth of investigation and cannot detect rock fractures more than three meters away from the borehole. Remote acoustic logging uses phase-controlled array-transmitting and long sound probes that increase the depth of investigation. The interpretation of logging data with respect to fractures is typically guided by practical experience rather than theory and is often ambiguous. We use remote acoustic reflection logging data and high-order finite-difference approximations in the forward modeling and prestack reverse-time migration to image fractures. First, we perform forward modeling of the fracture responses as a function of the fracture-borehole wall distance, aperture, and dip angle. Second, we extract the energy intensity within the imaging area to determine whether the fracture can be identified as the formation velocity is varied. Finally, we evaluate the effect of the fracture-borehole distance, fracture aperture, and dip angle on fracture identification.

Estimating primaries by sparse inversion of the 3D Curvelet transform and the L1-norm constraint

In this paper, we built upon the estimating primaries by sparse inversion （EPSI） method. We use the 3D curvelet transform and modify the EPSI method to the sparse inversion of the biconvex optimization and Ll-norm regularization, and use alternating optimization to directly estimate the primary reflection coefficients and source wavelet. The 3D curvelet transform is used as a sparseness constraint when inverting the primary reflection coefficients, which results in avoiding the prediction subtraction process in the surface-related multiples elimination （SRME） method. The proposed method not only reduces the damage to the effective waves but also improves the elimination of multiples. It is also a wave equation- based method for elimination of surface multiple reflections, which effectively removes surface multiples under complex submarine conditions.

A new method for specular curved surface defect inspection based on reflected pattern integrity

Defect inspection of specular curved surface is a challenging job. Taking steel balls for example, a new method based on reflected pattern integrity recognition is put forward. The specular steel ball surface will totally reflect the patterns when it is placed inside a dome-shaped light source, whose inner wall is modified by patterns with certain regular. Distortion or intermittence of reflected pattern will occur at the defective part, which indicates the pattern has lost its integrity. Based on the integrity analysis of reflected pattern images？ surface defects can be revealed. In this paper, a set of concentric circles are used as the pattern and an image processing algorithm is customized to extract the surface defects. Results show that the proposed method is effective for the specular curved surface defect inspection

Seismic reflection characteristics of fluvial sand and shale interbedded layers

A sedimentary geological model is established in order to study the seismic reflection characteristics of channel sand bodies. Synthetic seismic shot gathers are simulated using the acoustic wave equation and then are prestack time migrated. On the imaged data, the reflection characteristics and instantaneous attributes are analyzed and log-constrained impedance inversion is tested. Because of wave field interference, the experimental results show that seismic events do not definitely correspond to the channel sand bodies and that seismic modes of occurrence do not represent the actual ones. The seismic events formed by wave interference may lead to errors and pitfalls in sand body interpretation. The corresponding relations between instantaneous seismic attributes and sedimentary sands are not well established. Log-constrained impedance inversion improves the resolution of channel sands. However, if the inverted resolution is forced to be too high, artifacts related to the initial model may occur.

Application of the equivalent offset migration method in acoustic log reflection imaging

Borehole acoustic reflection logging can provide high resolution images of nearborehole geological structure. However, the conventional seismic migration and imaging methods are not effective because the reflected waves are interfered with the dominant borehole-guided modes and there are only eight receiving channels per shot available for stacking. In this paper, we apply an equivalent offset migration method based on wave scattering theory to process the acoustic reflection imaging log data from both numerical modeling and recorded field data. The result shows that, compared with the routine post-stack depth migration method, the equivalent offset migration method results in higher stack fold and is more effective for near-borehole structural imaging with low SNR acoustic reflection log data.

Evaluation of PS-DInSAR technology for subsidence monitoring caused by repeated mining in mountainous area

The high resolution Terra SAR-X dataset was employed with DIn SAR and persistent scatterer interferometry（PSI） technique for subsidence monitoring in a mountainous area. For DInS AR technique, the generally used SRTM and relief-DEM, which was derived from aerial topographic map, were used to evaluate the influence of external DEM. The results show that SRTM could not fully compensate the complex topography of the research area. The corner reflectors installed during the acquisition of SAR dataset were used to estimate the accuracy of geocoding. The terrain corrected geocoding results based on relief-DEM were much better than using SRTM, with the root mean square error（RMSE） being 6.35 m in X direction and 11.65 m in Y direction（both in UTM projection）, around one pixel of the multilooked intensity image to be geocoded. For PSI technique, the results from time-series analysis of multi-baseline differential interferograms were integrated to restrict only persistent scatterer candidates near the boundary of subsiding area for regression analysis. The results demonstrate that PSI can refine the boundary of subsidence, which could then be used to derive some angular parameters to help people to learn the law of subsidence caused by repeated excavation in this area.

Reflection coefficients of P-SV waves in weak anisotropic media

We introduce the Thomsen anisotropic parameters into the approximate linear reflection coefficient equation for P-SV wave in weakly anisotropic HTI media. From this we get a new, more effective, and practical reflection coefficient equation. We performed forward modeling to AVO attributes, obtaining excellent results. The combined AVO attribute analysis of PP and PS reflection data can greatly reduce ambiguity, obtain better petrophysical parameters, and improve parameter accuracy.

Investigating Jet Appearance in Different Background Lights with High-Speed Frame Photography

Shaped charge jet formation process is studied under the conditions of different background lights by means of high speed frame photography. In order to shoot true jet appearance, the glass tube in which jet moves is vacuumized. The experiment results show that observing jet appearance with the double reflecting mirrors system is feasible as long as the vacuum of the glass tube can meet the requirement of experiment.

Fluvial reservoir characterization and identification:A case study from Laohekou Oilfield

Finding channel sandbodies is an important task in oil and gas exploration due to the importance of fluvial reservoirs. It is difficult to describe fluvial reservoirs in detail owing to their frequent changes and serious intersections, as well as limitations of S/N ratio and seismic data resolution. Based on the Laohekou 3D data in Shengli Oilfield, we analyze the general characteristics of fluvial reservoirs in this area, from which we find that they are characterized by strong amplitudes on seismic profiles, high continuity on time slices, and low frequency in the frequency domain. In addition, a cluster of strong string-bead- like reflections was found after color processing and detailed interpretation. To understand this observation, we conduct forward modeling to explain the mechanism. This provides a new way to identify ancient channels in similar areas. By using the multi-attribute fusion and RGB display techniques, channel incision is more obvious and the characteristics of the channel structures are manifested much better. Finally, we introduce and apply multi-wavelet detection technology to identify weaker fluvial reservoir signals.

Modeling and analysis of azimuthal AVO responses from a viscoelastic anisotropic reflector

We propose a method for mOdeling azimuthal AVO responses from a fractured i reflector. The method calculates the integrated reflected wavetrains, and the wavetrains contain elastodynamic information including the contrast in impedance and anelasticity i across interfaces, the intemal anisotropic propagation, the dispersion and attenuation along i the wave path, and tuning and interference. The results suggest that for large angles of incidence, the velocity dispersion and attenuation increase the amplitudes of PP waves from the top and decrease those from the bottom. For azimuthal responses at specific angles of incidence, the reflected wavetrains of PP waves tend to have longer duration with increasing azimuth. In contrast, model-converted PSV and PSH reflections show stable azimuthal features and are less affected by the reflector thickness. The amplitudes of PSV reflections increase with increasing azimuth; moreover, the waves have no reflection energy at 0° and 90° azimuth and maximum amplitude at 45° azimuth.

Poststack reverse-time migration using a non-reflecting recursive algorithm on surface relief

Presently the research based on the accurate seismic imaging methods for surface relief, complex structure, and complicated velocity distributions is of great significance. Reverse-time migration is considered to be one of highly accurate methods. In this paper, we propose a new non-reflecting recursive algorithm for reverse-time migration by introducing the wave impedance function into the acoustic wave equation and the algorithm for the surface relief case is derived from the coordinate transformation principle. Using the exploding reflector principle and the zero-time imaging condition of poststack reverse- time migration, poststack numerical simulation and reverse-time migration with complex conditions can be realized. The results of synthetic and real data calculations show that the method effectively suppresses unwanted internal reflections and also deals with the seismic imaging problems resulting from surface relief. So, we prove that this method has strong adaptability and practicality.

Micromechanical Tunable Optical Filter

A micromachined vertical cavity tunable filter with AlGaAs/GaAs distributed Bragg reflector is presented.This filter can be electrostatic tuning over a range of 28nm with an applied voltage of 7V.

Construction of universal quantitative models for the determination of cefoperazone sodium/sulbactam sodium for injection from different manufacturers using near-infrared reflectance spectroscopy

To develop near-infrared （NIR） reflectance spectroscopic methods for the quantitative analysis of cefoperazone sodium/ sulbactam sodium from different manufacturers for injection powder medicaments. Various powders of cefoperazone sodium/ sulbactam sodium were directly analyzed by non-destructive NIR reflectance spectroscopy using the spectrometer EQUINOX55. Two quantitative methods via integrating sphere （IS） and fiberoptic probe （FOP） models were explored from 6 batches of commercial samples and 42 batches of laboratory samples at a content ranging from 30% to 70% for cefoperazone and 60% to 20% for sulbactam. The root mean square errors of cross validation （RMSECV） and the root mean square errors of prediction （RMSEP） of IS were 1.79% and 2.85%, respectively, for cefoperazone sodium, and were 1.86% and 3.08%, respectively, for sulbactam sodium; and those of FOP were 2.93% and 2.92%, respectively, for cefoperazone sodium, and were 2.23% and 3.01%, respectively, for sulbactam sodium. Based on the ICH guidelines and Ref. 12, the quantitative models were then evaluated in terms of specificity, linearity, accuracy, precision, robustness and model transferability. The non-destructive quantitative NIR methods used in this study are applicable for rapid analysis of injectable powdered drugs from different manufacturers.