Selection of Reference Genes in Transcription Analysis of Gene Expression of the Mandarin Fish, Siniperca chuasti

At present, transcription analysis of gene expression commonly uses housekeeping genes as control for normalization. In this study, the expression levels of three housekeeping genes including GAPDH, β-actin, and 18S rRNA in six tissues and five developmental stages of the Mandarin fish Siniperca chuatsi were assayed with quantitative real-time PCR （qPCR）. Differences in expression levels were analyzed using geNorm program. The results demonstrate that β-actin is the most stable gene at developmental stages and GAPDH is the most stable in different tissues. While 18S rRNA expression during development is differentially regulated, which indicates it is suitable as an internal control for gene expression normalization at the developmental level. Overall, the data suggest that the two most stable housekeeping genes are enough to accurately calibrate gene expression in S. chuatsi. The significance of this study provided convincing references and methodology for housekeeping gene selection and normalization in gene expression analysis with regular PCR or qPCR.

Dynamic behavior of rock during its post failure stage in SHPB tests

In order to investigate the micro-process and inner mechanism of rock failure under impact loading, the laboratory tests were carried out on an improved split Hopkinson pressure bar （SHPB） system with synchronized measurement devices including a high-speed camera and a dynamic strain meter. The experimental results show that the specimens were in the state of good stress equilibrium during the post failure stage even when visible cracks were forming in the specimens. Rock specimens broke into strips but still could bear the external stress and keep force balance. Meanwhile, numerical tests with particle flow code （PFC） revealed that the failure process of rocks can be described by the evolution of micro-fractures. Shear cracks emerged firstly and stopped developing when the external stress was not high enough. Tensile cracks, however, emerged when the rock specimen reached its peak strength and played an important role in controlling the ultimate failure during the post failure stage.

Temperature-programmed pyrolysis of magnesium ammonium phosphate and removal of ammonia-nitrogen by its pyrolysate

In order to achieve the dual goals of complete deamination of magnesium ammonium phosphate（MAP） and ensure the pyrolysate＇s good removal properties towards ammonia-nitrogen, a temperature-programmed method for the pyrolysis of MAP was studied, as well as the thermodynamic and kinetic processes involved in the removal reaction system between MAP pyrolysate and aqueous ammonium. It was found that the pyrolysis method and pyrolysis final temperature had significant effects on the MAP pyrolysate＇s removal properties towards aqueous ammonium, and the following conditions were deemed to be more appropriate： pyrolysis final temperature and heating rate at 180 ℃ and 5 ℃/min, respectively, and a pH level of 9.5 for the removal reaction system. The resultant ammonium removal capacity by the MAP pyrolysate was 95.62 mg/g. After 120 min, the removal rate with an initial concentration of 1000 mg/L was 82%. The kinetic and thermodynamic results indicated that the removal of aqueous ammonium by MAP pyrolysate was the exchange process between H^＋ and NH4^＋ via MAP precipitation. The kinetics complied with the Lagergren quasi second-order model with an equilibrium time of 120 min, while the isothermal curves complied with the Freundlich model.

Design and realization of security physical isolation system

A physical isolation system based on PCI (peripheral component interconnect),embedded with intelligence card technology, strong identity authentication technology and securityaudit, etc., is introduced. The system can physically isolate the internaland external networks. Thehardware of the system, including PCI interface control circuits, network interface circuits andlogic control circuits, is designed to automatically adapt its operation speed and mode to thenetwork and securely isolate the internal and external networks; the software of the system,including the security strategy management module, the security audit module, the database recordexchanging module, the file exchanging module and the mail exchanging module, is designed toefficiently exchange and manage the data transference between the internal and external networks.Also the driver of the system is implemented with Windows driver development kits (DDK) based onNetwork Driver Interface Specification (NDIS). The prototype ofthe system developed has beenemployed in the Police Fire Protection Bureau of Hubei Province, which performs consistently andefficiently. The technological cruxes discussed have practical values for related subjects.

Parallel rapid relaxation inversion of 3D magnetotelluric data

We implement a parallel algorithm with the advantage of MPI （Message Passing Interface） to speed up the rapid relaxation inversion for 3D magnetotelluric data. We test the parallel rapid relaxation algorithm with synthetic and real data. The execution efficiency of the algorithm for several different situations is also compared. The results indicate that the parallel rapid relaxation algorithm for 3D magnetotelluric inversion is effective. This parallel algorithm implemented on a common PC promotes the practical application of 3D magnetotelluric inversion and can be suitable for the other geophysical 3D modeling and inversion.

Flow Cytometric Evidence for Hydroxyl Radical-induced Apoptosis in Tobacco Protoplasts

Protoplasts prepared from tobacco (Nicotiana tabacum L., cultivar BY-2) suspension cells have similar morphological characteristics to those in animal cells. The hallmarks of apoptosis such as condensation and peripheral distribution of nuclei, TUNEL positive reaction, and DNA ladders were observed when tobacco protoplasts were treated with the hydroxyl radical generating system (1.0 mmol/L FeSO4/0.5 mmol/L H2O2). In animals, the loss of transmembrane potential (DeltaPsi(m)) and the exposure of phospholipid phosphatidylserine (PS) are believed to be the main apoptosis events. To test whether these significant processes take place in plants, flow cytometry was used to detect annexin V binding and changes in DeltaPsi(m). Results showed that the PS turned out from inner membrane and DeltaPsi(m) gradually decreased during the apoptosis. All these apoptotic characteristics proved that hydroxyl radicals can cause typical programmed cell death (PCD) in tobacco protoplasts and this design can be served as an effective experiment system to explore the mechanism of plant apoptosis.

Influence of amorphous degree on crystallization kinetics of Zr_(60)Al_(15)Ni_(25) bulk metallic glass

The microstructure of as-cast Zr60Al15Ni25 bulk metallic glass was investigated by high-resolution transmission electron microscopy. It is found that there exist numerous short-range order regions （SRORs） in the metallic glass though it is identified to be amorphous by X-ray diffraction method. Furthermore, the amorphous degree shows a close correlation with the microstructure of corresponding mother ingot. The crystallization kinetics was investigated by differential scanning calorimetry under isochronal and isothermal conditions. The results show that the crystallization is triggered by the growth of the pre-existing SRORs and the growth is three-dimension diffusion-controlled. The amorphous degree of Zr60Al15Ni25 bulk metallic glass considerably influences its crystallization kinetics, namely, the more homogeneous distribution of atoms results in a more sluggish nucleation behavior.

Determination of Chlorine and Bromine in Plant Materials by Ion Chromatography

A method was developed for determination of chlorine and bromine in plant materials by ion chromatography using temperature programing-semi molten for sample preparation. Values of detection limits of the method found were 1.0×10^-5 for CI and 1.3×10^-6 for Br. The measuring range of the method found were 0.3-20.0 mg/L for CI and 4,0-120,0 μg/L for Br. The results obtained agreed quite well with those reference values.

Chromosomal Localization of Genes bz1,bz2 in Maize by Using Ultra-sensitive FISH with Tyramide Signal Amplification(TSA-FISH)

It has been reported that endosperm undergoes programmed cell death (PCD) during maize kernel development.Both bz1 (bronze ) and bz2 are anthocyanin biosynthetic genes,and related to development of aleuronic layer of maize seeds.Tyramide signal amplification fluorescence in situ hybridization (TSA FISH) is a novel and high sensitive FISH technique,which is suitable for routine application in plant cytogenetic research.Using this technique,we physically mapped the bz1 gene onto the short arm of chromosome 9 and the long arm of chromosome 1;the percentage distances from centromere to hybridization site were 40.2,75.4 respectively,and the bz2 onto the long arm of chromosome 1 and the short arm of chromosome 5;the percentage distances from centromere to hybridization site were 21.6,15.3 separately.The TSA FISH techniques of small low copy DNA sequences for plants are discussed.

The Key Techniques of VHDL Parser's Automatic Generation

VHDL and its supporting environment are active domain in the field of logic design.In the paper the design principle and some key techniques to solve the problems on the implementation of the VHDL parser are introduced. According to the methods discussed in the paper, the VHDL parser based on VHDL IEEE 1076 standard version is implemented and a series of strict tests are done. This VHDL parser is front-end tool of the VHDL high level synthesis and mixed level simulation system developed by the Research Center of ASIC of BIT.

Methods of Validating Simulation Model and Program Design

Validating simulation model is one of the important aspects for modeling and simulation. Some methods of validating model are compared and analyzed. Several typical methods, such as TIC’s inequality coefficient, gray interconnected analysis, direct spectrum estimation, maximum entropy spectral estimation based on Burg or Marple, are chosen and programmed in C language. Some examples by using the program are given. The results show that the program is available and it is best to adopt multi methods for validating models.

RESEARCH OF B2B E-COMMERCE SYSTEM MODEL BASED ON WEB SERVICE

B2B E Commerce is one of the most potential electronic commerce forms at present. But since traditional B2 B E Commerce system lacks an unified standard and solution of basic architectur e a nd interface, it has many shortcomings such as poor reusability and poor extensi bility. In order to solve the problem, combined with Web Service technology, a B 2B E Commerce system model based on Web Service is proposed and analyzed. The m odel can combine relatively independent Web Service on Intranet and Internet by constructing core application program. As a part of supply chain, it can also pr ovide a standard interface for other applications such as ERP/CRM/SCM, etc. Th er efore, B2B E Commerce system with this form is easy for development, integratio n and maintenance. Finally, a solution of B2B E Commerce system based on Web Se rvice is propounded by introducing an instance.

Design of Aided Decision-Making Program for Prioritizing Construction Projects in Urban Road Network Planning

The importance and complexity of prioritizing construction projects (PCP) in urban road network planning lead to the necessity to develop an aided decision making program (ADMP). Cost benefit ratio model and stage rolled method are chosen as the theoretical foundations of the program, and then benefit model is improved to accord with the actuality of urban traffic in China. Consequently, program flows, module functions and data structures are designed, and particularly an original data structure of road ...

The Design and Implementation of an Object-Oriented Hypermedia System

Presents an object-oriented NBO(node-block-object)data model for hypermedia system.It takes advantage of object-oriented method,encapsulates all multimedia information as well as link functions in one unit,It has successfully achieved cross link to offer much better flexibility and two-way link to realize forward and backward searching in hypermedia system navigation.A conditional relation on links has also been realized,that is very helpful for time sensitive multimedia information processing and multimedia object cooperation.

Visual object-oriented application for lane following on intelligent highway system

A visual object-oriented software for lane following on intelligent highway system (IHS) is proposed. According to object-oriented theory, 3 typical user services of self-check, transfer of human driving and automatic running and abnormal information input from the sensors are chosen out. In addition, the functions of real-time display, information exchanging interface, determination and operation interweaving in the 3 user services are separated into 5 object-oriented classes. Moreover, the 5 classes are organized in the visual development environment. At last, experimental result proves the validity and reliability of the control application.

Application of Participatory Monitoring and Evaluation in Development of Animal Husbandry Technology

[Objective] This study aimed to provide references for the application of participatory monitoring and evaluation in the development of animal husbandry tech- nology. [Method] With the livelihood improvement program for agricultural and pas- toral area in northern Yunnan as the example, the development process of partici- patory animal husbandry was overviewed. And the monitoring and evaluation pro- cesses of participatory animal husbandry were introduced and analyzed. [Result] The monitoring and evaluation indicator system of participatory animal husbandry technol- ogy included 4 layers, namely technology, institutional system, personnel ability con- struction and effectiveness, and 11 third-level indicators, namely, technical characteristics, superiority-inferiority comparison, community and farmers, technical personnel, project personnel, economic indicators and social indicators. [Conclusion] This study provided the references for the application of participatory monitoring and evaluation in the development of animal husbandry technology.

Monadically slicing programs with procedures

A two-phase monadic approach is presented for monadically slicing programs with procedures. In the monadic slice algorithm for interprocedural programs, phase 1 initializes the slice table of formal parameters in a procedure with the given labels, and then captures the callees＇ influence on callers when analyzing call statements. Phase 2 captures the callees＇ dependence on callers by replacing all given labels appearing in the corresponding sets of formal parameters. By the introduction of given labels, this slice method can obtain similar summary information in system-dependence-graph（SDG）-based algorithms for addressing the calling-context problem. With the use of the slice monad transformer, this monadic slicing approach achieves a high level of modularity and flexibility. It shows that the monadic interprocedural algorithm has less complexity and it is not less precise than SDG algorithms.

Approach to evaluating exception handling of programs

To solve the problems that the exception handling code is hard to test and maintain and that it affects the robustness and reliability of software, a method for evaluating the exception handling of programs is presented. The exception propagation graph （EPG） that describes the large programs with exception handling constructs is proposed by simplifying the control flow graph and it is applied to a case to verify its validity. According to the EPG, the exception handling code that never executes is identified; the points that are the most critical to controlling exception propagation are found; and the irrational exception handling code is corrected. The constructing algorithm for the EPG is given; thus, this provides a basis for automatically constructing the EPG and automatically correcting the irrational exception handling code.

Prediction of Injection-Production Ratio with BP Neural Network

Injection of water to enhance oil production is commonplace, and improvements in understanding the process are economically important. This study examines predictive models of the injection-to-production ratio. Firstly, the error between the fitting and actual injection-production ratio is calculated with such methods as the injection-production ratio and water-oil ratio method, the material balance method, the multiple regression method, the gray theory GM (1,1) model and the back-propogation (BP) neural network method by computer applications in this paper. The relative average errors calculated are respectively 1.67%, 1.08%, 19.2%, 1.38% and 0.88%. Secondly, the reasons for the errors from different prediction methods are analyzed theoretically, indicating that the prediction precision of the BP neural network method is high, and that it has a better self-adaptability, so that it can reflect the internal relationship between the injection-production ratio and the influencing factors. Therefore, the BP neural network method is suitable to the prediction of injection-production ratio.