开创日本近代教育制度的《学制》

日本的近代化开始于明治时期 ,而作为明治时期的第一部教育改革法令 ,《学制》可谓开创了日本的近代教育。教育作为国家的基本职能 ,无疑影响着一个国家的勃兴与发展。作为日本近代教育制度的开创者 ,《学制》不仅凝聚了前代无价的精神遗产和当时无数有识之士的前瞻眼光 ,也的确为日本后来的教育指出了方向 ,为日本的强国奠定了坚实的基础。但由于无法避免的时代局限性 ,仅仅 7年 ,《学制》便被 1 879年颁布的《教育令》所代替。相信对《学制》中教育思想的研究 ,对我们今天的初、中等教育具有宝贵的参考价值。

Evolutionary analysis of green credit and automobile enterprises under the mechanism of dynamic reward and punishment based on government regulation

To explore the green development of automobile enterprises and promote the achievement of the“dual carbon”target,based on the bounded rationality assumptions,this study constructed a tripartite evolutionary game model of gov-ernment,commercial banks,and automobile enterprises;introduced a dynamic reward and punishment mechanism;and analyzed the development process of the three parties’strategic behavior under the static and dynamic reward and punish-ment mechanism.Vensim PLE was used for numerical simulation analysis.Our results indicate that the system could not reach a stable state under the static reward and punishment mechanism.A dynamic reward and punishment mechanism can effectively improve the system stability and better fit real situations.Under the dynamic reward and punishment mechan-ism,an increase in the initial probabilities of the three parties can promote the system stability,and the government can im-plement effective supervision by adjusting the upper limit of the reward and punishment intensity.Finally,the implementa-tion of green credit by commercial banks plays a significant role in promoting the green development of automobile enter-prises.

Effect of thermo-mechanical treatment on microstructure and mechanical properties of wire-arc additively manufactured Al-Cu alloy

Wire-arc additive manufacture(WAAM)has great potential for manufacturing of Al-Cu components.However,inferior mechanical properties of WAAM deposited material restrict its industrial application.Inter-layer cold rolling and thermo-mechanical heat treatment(T8)with pre-stretching deformation between solution and aging treatment were adopted in this study.Their effects on hardness,mechanical properties and microstructure were analyzed and compared to the conventional heat treatment(T6).The results show that cold rolling increases the hardness and strengths,which further increase with T8 treatment.The ultimate tensile strength(UTS)of 513 MPa and yield stress(YS)of 413 MPa can be obtained in the inter-layer cold-rolled sample with T8 treatment,which is much higher than that in the as-deposited samples.The cold-rolled samples show higher elongation than that of as-deposited ones due to significant elimination of porosity in cold rolling;while both the T6 and T8 treatments decrease the elongation.The cold rolling and pre-stretching deformation both contribute to the formation of dense and dispersive precipitatedθ′phases,which inhibits the dislocation movement and enhances the strengths;as a result,T8 treatment shows better strengthening effect than the T6 treatment.The strengthening mechanism was analyzed and it was mainly related to work hardening and precipitation strengthening.

Effect of Ni on microstructure and mechanical properties of Al−Mg−Si alloy for laser powder bed fusion

The microstructures and mechanical properties were systematically studied for the high-strength Al−5Mg_(2)Si−1.5Ni alloy fabricated by laser powder bed fusion(L-PBF).It is found that the introduction of Ni(1.5 wt.%)into an Al−5Mg_(2)Si alloy can significantly improve the L-PBF processibility and provide remarkable improvement in mechanical properties.The solidification range of just 85.5 K and the typical Al−Al3Ni eutectics could be obtained in the Ni-modified Al−5Mg_(2)Si samples with a high relative density of 99.8%at the volumetric energy density of 107.4 J/mm^(3).Additionally,the refined hierarchical microstructure was mainly characterized by heterogeneousα-Al matrix grains(14.6μm)that contain the interaction between dislocations and Al−Al3Ni eutectics as well as Mg_(2)Si particles.Through synergetic effects of grain refinement,dislocation strengthening and precipitation strengthening induced by Ni addition,the L-PBFed Al−5Mg_(2)Si−1.5Ni alloy achieved superior mechanical properties,which included the yield strength of(425±15)MPa,the ultimate tensile strength of(541±11)MPa and the elongation of(6.2±0.2)%.

Bending properties and fracture mechanism of C/C composites with high density preform

C/C composites with banded structure pyrocarbon were fabricated by fast chemical vapor infiltration（CVI）,with C3H6 as carbon source,N2 as carrier gas,and three-dimensional（3D） 12K PAN-based carbon fabric with high density of 0.94 g/cm3 as preform.Experimental results indicated that the fracture characteristics of C/C composites were closely related to the frequency of high-temperature treatment（HTT） at the break of CVI process.According to the load？displacement curves,C/C composites showed a pseudoplastic fracture after twice of HTT.After three times of HTT,load？displacement curves tended to be stable with a decreasing bending strength at 177.5 MPa.Delamination failure and intrastratal fiber fracture were observed at the cross-section of C/C composites by scanning electronic microscope.Because the content of pyrocarbon and fibers has a different distribution in layers,the C/C composites show different fracture characteristics at various regions,which leads to good toughness and bending strength.

Growth kinetics for intermetallic compound layer between molten In-Sn alloy and CuZr-based bulk metallic glass

The growth kinetics of intermetallic compound layer between molten In-Sn alloy and Cu40Zr44Al8Ag8 bulk metallic glass substrate was examined by solid state isothermal aging at the temperature range between 333 and 393 K.The aged samples were characterized by scanning electron microscopy and energy dispersive spectrometry.It is found that the intermetallic compound layer is composed of Zr,Cu and Sn.The layer growth of the intermetallic compound is mainly controlled by a diffusion mechanism over the temperature range and the value of the time exponent is approximately 0.5.The apparent activation energy for the growth of total intermetallic compound layers is 98.35 kJ /mol calculated by the Arrhenius equation.

Seed Shadow of Quercus liaotungensis in a Broad-leaved Forest in Dongling Mountain

The seed shadow of oak ( Quercus liaotungensis Koidz.) was investigated in a broad_leaved deciduous forest in Dongling Mountain in 1997. The seed rain patterns under oak tree crown for three out of four oak trees fit quadratic distribution, with high coefficients of determination. For each of the four trees selected in this study the seed rain size estimated from the viable acorns collected from the traps deployed under the crown was low, ranging from 26 to 259. For each of the four oak trees, the average density of the seed rain under oak tree crown ranged from 0.76 to 7.26 seeds/m 2. The average seed rain density estimated from the acorns in the traps deployed randomly in the field was 1.57 seeds/m 2. After all viable acorns fell, the acorn ground density estimated from the acorns in the quadrats was 0.13 seeds/m 2, but no viable acorns were found on the ground under the tree crown of the four oak trees, although the area under the crown was over 5 folds than the area of the combined quadrats. These results indicated that a large number of acorns was removed or predated by vertebrates once the acorns fell on the ground and acorns predation was more intensive in the sites directly under the parent trees than the sites away from the parent trees; this supports the distance_dependent hypothesis. Of the total acorns of all four oak trees, the viable acorns only accounted for 18.1%, and 17.8% for acorns infected by insect larvae, 12.1% for immature acorns, 3.6% for decayed acorns, and the acorns predated by rodent directly in the crown was the highest, accounting for 48.4%. The proportion of acorns predated by animals including vertebrates and invertebrates amounts up to 78.3%, indicating that acorn predation by animals is a limiting factor affecting acorn survival before seed dispersal. The sustained time of viable acorn fall ranged from September 8 to October 3 for the four oak trees, with the peak between 16th and 26th September. The number of acorns was not significantly different among the four directions around the trunk base.

Immunologic pathogenesis of multiple sclerosis

Multiple sclerosis （MS） is an autoimmune disease. The etiology and pathogenesis of MS remain unclear. At present, there are substantial evidences to support the hypothesis that genetics plays a crucial role. The people who have genetic predisposing genes easily develop immune-mediated disorder, probably in conjunction with environmental factors. The aim of this review is to describe recent observations regarding the immunologic pathogenesis of MS.

Principle, Modeling and Control of DC-DC Convertors for EV

DC DC convertors can convert the EV's high voltage DC power supply into the low voltage DC power supply. In order to design an excellent convertor one must be guided by theory of automatic control. The principle and the method of design, modeling and control for DC DC convertors of EV are introduced. The method of the system response to a unit step function input and the frequency response method are applied to researching the convertor's mathematics model and control characteristic. Experiments show that the designed DC DC convertor's output voltage precision is high, the antijamming ability is strong and the adjustable performance is fast and smooth.

Reproduction of the Three-line Genic Male Sterile Line Parent Mian 7MB-1 （Brasscia Napus L.） and Seed Production of F1 Based on Somatic Tissue Culture

[Objective] The aim was to study the reproduction of the three-line genic male sterile （GMS） lineparent Mian7MB-1 （B. NapusL.） and the seed production of F1 through somatic tissue culture. [Methed] Through hybridization, a new breeding material Mian 7MB-1 in three-line genic temporary maintainer line propagated by tissue culture was used to improve the sterile plant rate of rapeseed in dual-purpose recessive GMS line, such as Mian 7AB type, S45AB type, and etc. And then the variety comparative test was performed. [Result] In order to avoid some fertility restoration phenomena occurring during the process of self-reproduction, Mian 7AB was propagated in bulk with somatic tissue culture of temporary maintainer line plant stem. The propagated temporary maintainer line seedlings were applied to the breeding and seed production of net room male sterile line parent, promoting the sterile plant rate of the male sterile line parent to 91.7% -93.5%. The male sterile line parents per hectare were enough for the seed production of hybrid F1 in 7 500 -15 000 hm^2. [ Conclusion ] Compared with the original dual-purpose GMS line, the seed production ultilizing male sterile line with high sterile plant rate greatly reduced the labor, significantly improved the seed yield, ensuring the seed quality and forming a perfect breeding and seed production system.

Anticancer Activities of Substituted Cinnamic Acid Phenethyl Esters on Human Cancer Cell Lines

Caffeic acid phenethyl ester (CAPE) and sixteen substituted cinnamic acid phenethyl esters were prepared via conventional procedures in order to test their in vitro anticancer activities by either MTT assay or SRB assay on six different human cancer cell lines. The results indicated that in the concentration of 10 μmol·L -1 the lead compound CAPE possessed anticancer activities against human HL 60, Bel 7402, and Hela cell lines, and two other compounds possessed potent anticancer activities against Bel 7402 and Hela cell lines.

Preparation and tribological properties of surface modified Cu nanoparticles

Cu nanoparticles surface-modified by dioctylamine dithiocarbamate （DTC8） were synthesized using a two-phase extraction route. The size, morphology and structure of resultant surface-capped Cu nanoparticles （coded as DTC8-Cu） were analyzed by means of X-ray diffraction, transmission electron microscopy and infrared spectrometry. The tribological behavior of DTC8-Cu as an additive in liquid paraffin was evaluated with a four-ball machine, and the surface topography of the wear scar was also examined by means of scanning electron microscopy. Results show that Cu nanoparticles modified by DTC8 have a small particle size and a narrow size distribution. Besides, DTC8-Cu as an additive in liquid paraffin has excellent antiwear ability, due to the deposition of nano-Cu with low melting point on worn steel surface leading to the formation of a self-repairing protective layer thereon.

Leaching kinetics of zinc silicate in ammonium chloride solution

The leaching kinetics of zinc silicate in ammonium chloride solution was investigated. The effects of stirring speed （150？400 r/min）, leaching temperature （95-108 ℃, particle size of zinc silicate （61-150 μm） and the concentration of ammonium chloride （3.5-5.5 mol/L） on leaching rate of zinc were studied. The results show that decreasing the particle size of zinc silicate and increasing the leaching temperature and concentration of ammonium chloride can obviously enhance the leaching rate of zinc. Among the kinetic models of the porous solids tested, the grain model with porous diffusion control can well describe the zinc leaching kinetics. The apparent activation energy of the leaching reaction is 161.26 kJ/mol and the reaction order with respect to ammonium chloride is 3.5.

MATHEMATICAL MODEL OF SELF-REPAIRING FLIGHT CONTROL

The most prospective method for certain structural failures and damages that cannot employ redundancy is self-repairing techniques, to ensure especially the maximum flight safety. Based on the characters of self-repairing aircraft, this paper states some basic assumptions of the self-repairing aircraft, and puts forward some special new conceptions concerning the self-repairing aircraft: control input, operating input, command input, repair input and operating and control factor as well as their relationships. Thus it provides a simple and reliable mathematical model structure for the research on the self-repairing control of the aircraft.

Research on the Nickel Metal Hydride Battery Quick Charger

In order to design a new type of quick charger for NiMH battery, the new method of pulse charge discharge was adopted after studying the charge process and analyzing the NiMH battery charge characteristics. The charge and discharge experiments were carried out to check feasibility and superiority of the new method. The results indicated that with the discharge pulse added the charger can charge quickly, the battery voltage and temperature can be properly controlled to prevent the battery being destroyed, and the capacity of the NiMH battery is greater than that of the battery without the discharge pulse added.

HPLC Determination of Captopril in Human Plasma with Pre-column Derivation and Solid-phase Extraction and Studies on Its Pharmacokinetic and Relative Bioavailability

A new pre-column derivation HPLC method with solid-phase extraction to determine captopril in human plasma was established. Derivation products were extracted by a solid-phase extraction method after the reagent, p-a-dibromoacetophenone(p-BPB), was added in the plasma samples. The samples were analyzed in a VP-ODS column with UV-detector. The calibration curve of captopril was linear within the range of 5~1000 ngmL-1 with r=0.9987, the recovery of this method was 98.652.04%, within day and between day RSD were no more than 3.4% and 8.4% respectively. To study the pharmacokinetics and the relative bioavailability of captopril tablets, two formulations of captopril tablets were given to 18 healthy male volunteers according to a randomized 2-way cross-over design with a 1-week washout period. The respective AUC0~6 , Cmax and Tmax values of the two formulations were 424.5125.7 and 439.4113.3 mghL-1; 505.9244.6 and 504.8172.2 mgL-1; 0.6620.181 and 0.5280.176 h. Results from statistics analysis showed that there were no significant difference between the AUC0~6 , Cmax and Tmax values of the two formulations, The relative bioavailability of tablets I with respect to II was 96.114.6% from AUC0~6 measurement. Bioequivalance was observed between the two tablets.

Effects of rolling and annealing on microstructures and properties of Cu-Mg-Te-Y alloy

Microstructures and element distributions of the as-cast, hot-rolled and cold-rolled Cu-Mg-Te-Y alloys were studied. Effects of rolling process and annealing temperature on the properties of the Cu-Mg-Te-Y alloys were correspondingly investigated. The results indicate that the Mg element is homogeneously distributed in the matrix and the fragmentized Cu2Te phase is dispersed in the matrix after hot rolling. Then, the Cu2Te phase is further stretched to strip shape after the cold rolling process. The microstructures of the cold-rolled alloy keep unchanged for the sample annealed below 390 ℃ for 1 h. However, after annealing at 550 ℃ for 1 h, the copper alloy with fibrous microstructures formed during the cold rolling process recrystallizes, leading to an obvious drop of hardening effect and an increase of electrical conductivity. The Cu-Mg-Te-Y alloy with better comprehensive properties is obtained by annealing at 360-390 ℃.

INTELLIGENT PRECISION CONTROL IN CNC GRINDING

The development of intelligent control techniques provides powerful means for the control of machine tools. In this paper, a intelligent control technique and an algorithm for precision control of CNC grinding of ceramic chips are introduced. In the process of ceramic chip CNC grinding, the dimension of the chips tends to get larger and the dimensional error to exceed the tolerance as the number of the chips increases which are machined on the same part program. There are many factors leading to the occurrence of the error and the law of error variation is very complicated. With the introduced intelligent self learning error compensation technique, the CNC system can improve the control strategy to compensate the error automatically. The simulational result is also given.

Inhibition of Chlamydospore Germination and Mycelial Growth of Trichoderma spp. by Chemical Fungicides

For exploring the influences of application and residue of chemical fungi- cides on chlamydospore preparations of Trichoderma spp., the effects of seven chemical fungicides on chlamydospore germination and mycelia growth of two bio- control fungi T. harzianum 610 and T. Iongibrachiatum 758 were studied. Carben- dazim, tebuconazole and difenoconazole showed strong toxicities, thiram and car- bexin showed moderate toxicities, and metalaxyl showed Mycelia growth of the two strains was more sensitive to most tested fungicides than those of chlamydospore germination. Chlamydospore germination of 610 was more sensitive to tested fungicides than those of 758, and mycelia growth of 758 was more sensitive to most tested fungi- cides than those of 610. Among the seven fungicides, 98% carbendazim had the strongest effects （ECru values were 1.64 and 0.05μpg/ml）, and 70% pentachloroni- trobenzene had the weakest effects （EC50 values were 1.64 and 0,05 μg/ml） for chlamydospore germination and mycelia growth of 610. As for 758, 98% carbendaz- im had the strongest inhibitory effects and 95% metalaxyl had the weakest inhibitory for chlamydospore germination of 756 （EC50 values were 0.62 and 1 108.61 μg/ml respectively）, whereas 96.2% tebuconazole showed the strongest inhibitory effects for mycelia growth of 758 （EC= value was 0.32μg/ml）, and 95% metalaxyl was the weakest （EC= value was 1 206.29 μg/ml）. According to the applied concentration of different fungicides in practice, we concluded that chlamydospore preparations of 610 and 758 could not be combined with carbendazim, tebuconazole, thiram and carboxin for controlling plant diseases, and the pesticide residues to the biocontrol effects should be kept in mind. Chlamydospore preparations of 610 and 758 can be and difenoconazole for controlling plant dis- eases, 758 chlamydospore preparations and germinated chlamydospore of 610 can be combined with metalaxyl for controlling plant diseases, and pesticide residue risk was not serious.

Nutrient Limiting Factor and Agronomic Efficiency of Wheat in Fluvo-aquic Soil District in Northwest of Shandong Province

[Objective] This study aimed to provide basis for rational fertilizer application of wheat in fluvo-aquic soil in the northwest of Shandong Province.[Method] In this paper,the treatments of reduced N,P and K were set in order to explore the effects of fertilizer recommendation based on ASI systematic approach on wheat yield,agronomic efficiency and recovery rate of nutrients.[Result] Nitrogen was the main limiting factor for wheat production in that area,followed by phosphorus,and the third was potassium.Compared with the optimum treatment （OPT）,the reduction of N,P and K reduced the grain yield obviously,which came up to 22.4％,14.4％ and 13.4％ respectively.There were no obvious differences in grain yield among Farmer＇s Fertilization Practice （FP）,60％ OPT-N and OPT treatment.[Conclusion] Agronomic efficiency of N,P and K was 6.3,12.9 and 10 kg/kg respectively.The recovery rates of N,P and K in wheat season were 16.41％,17.27％ and 27.27％ respectively.