Preparation and Characterization of Nanometer TiO2 by Hydrolysis Precipitation Method

Nanometer TiO 2 powders were obtained from TiOSO 4 and studied by XRD, TEM and BET. The result indicated that pH and heat treatment temperature have great effects on their grain size and crystal phase structure. Annealed at 500 ℃, nanometer TiO 2 with a specific surface area of 101.39 m 2 ·g -1 and a grain size about 10 nm were obtained(pH=5); and with a specific surface area of 95.48 m 2 ·g -1 and a grain size about 30 nm were obtained(pH=10). The research indicated that crystal phase transformation of rutile at 750 ℃made great promotion in grain size growth.

试析《水法》下的水资源统一管理

水是关系社会可持续发展的重要资源,但是我国水管理的弊端造成水资源状况不容乐观。针对这一情况,2002年《水法》的修改重点之一是加强了水资源统一管理。本文从统一管理的必要性出发,分析了《水法》有关水资源统一管理的规定,并指出了有待完善之处。

Shared Ideas,Divergent Approaches:The Hydromethods of the Great West(Taixi shuifa泰西水法)and the Question on Tides

One of the questions about natural phenomena asked in the Hydromethods of the Great West(Taixi shuifa泰西水法;1612)(hereafter TXSF),composed by the Italian Jesuit Sabatino de Ursis with the support of the Chinese official Xu Guangqi徐光啟,concerns the causes of sea tides.The idiosyncratic answer given in the TXSF serves as an example for the Jesuit missionaries,strategically motivated approach to the transfer of knowledge through the translation of Western scientific thought into Chinese.From a chronological overview of the attempts made both in the East and in the West to theoretically conceptualize the causes of the cyclical occurrence of ebb and flow,the comparison reveals that despite being based on totally different cosmologies,the related insights were virtually on a par.The aim to nevertheless convince the audience of the TXSF of the superiority of Western sciences resulted in a particular rhetoric and a division of tasks in the composition of the tides paragraph.In order to verify the success of this joint effort of de Ursis and Xu Guangqi,a change of perspective from the transmitter to the receiver side is necessary.Thus,the paper also explores the work's reception in later Chinese works dealing with this topic.

Influence of confined water on the limit support pressure of tunnel face in weakly water-rich strata

In the process of shield tunneling through soft soil layers,the presence of confined water ahead poses a significant threat to the stability of the tunnel face.Therefore,it is crucial to consider the impact of confined water on the limit support pressure of the tunnel face.This study employed the finite element method(FEM)to analyze the limit support pressure of shield tunnel face instability within a pressurized water-containing layer.Subsequently,a multiple linear regression approach was applied to derive a concise solution formula for the limit support pressure,incorporating various influencing factors.The analysis yields the following conclusions:1)The influence of confined water on the instability mode of the tunnel face in soft soil layers makes the displacement response of the strata not significant when the face is unstable;2)The limit support pressure increases approximately linearly with the pressure head,shield tunnel diameter,and tunnel burial depth.And inversely proportional to the thickness of the impermeable layer,soil cohesion and internal friction angle;3)Through an engineering case study analysis,the results align well with those obtained from traditional theoretical methods,thereby validating the rationality of the equations proposed in this paper.Furthermore,the proposed equations overcome the limitation of traditional theoretical approaches considering the influence of changes in impermeable layer thickness.It can accurately depict the dynamic variation in the required limit support pressure to maintain the stability of the tunnel face during shield tunneling,thus better reflecting engineering reality.

From Chooz to the Ling'ao NPP:The Technology Transfer of Pressurized Water Reactor Technology from France to China

The transfer of pressurized water reactor(PWR)technology from France to China is an important event in the history of Sino-French scientific and technological relations.China has gradually achieved self-reliance in the field of PWR technology through the introduction and subsequent absorption of France's 900 MW reactors.Compared with the process of introducing and absorbing similar technology from the United States by France,China's experience has been more complicated.This circumstance reflects the differences in the nuclear power technology systems between the two countries.France's industrial strength and early acquisition of nuclear power technology laid a solid foundation for mastering PWR technology.On the other hand,although China established a weak foundation through the implementation of the"728 Project,"and tried hard to negotiate with France,the substantive content of the technology transfer was very limited.By way of the policy transition from"unhooking of technology and trade"to"integration of technology and trade,"China ultimately accomplished the absorption and innovation of PWR technology through the Ling'ao NPP.

我国环境资源法学研究新进展——2003年中国环境资源法学研讨会(年会)学术综述

2003年中国环境资源法学研讨会(年会)主要围绕环境资源法基本理论、水权交易、环境纠纷与环境诉讼、流域管理与流域立法、新《水法》与水资源管理等方面内容展开了深入的学术研讨,取得了一批学术成果,这些成果丰富了我国环境资源法学理论研究,反映了当前国内该领域学术研究的新进展。

复方醋酸钠林格注射液中无水葡萄糖含量测定方法的建立及葡萄糖转化现象的探讨

目的建立复方醋酸钠林格注射液中无水葡萄糖含量测定方法,并针对方法建立中发现的葡萄糖转化问题开展研究。方法采用氨基硅烷键合硅胶为填充剂的色谱柱;以乙腈-水-氨水(体积比75∶25∶0.1)为流动相;示差折光检测器检测;流速为1.0 mL/min,柱温和检测池温度均为40℃。结果无水葡萄糖浓度在0.4125~8.249 mg/mL范围内线性关系良好(r=1.0000),定量限为101μg/L,平均回收率为100.5%,RSD为0.5%,采用该测定法发现样品中少量葡萄糖转化为果糖。结论建立的方法简单、准确、灵敏度高,不受葡萄糖转化现象的干扰,适用于复方醋酸钠林格注射液中无水葡萄糖的含量测定。

Integrated process of large-scale and size-controlled SnO_2 nanoparticles by hydrothermal method

SnO2 nanoparticles with the average particle size of 5-30 nm were synthesized using SnCl4·5H2O as the precursor and NH3·H2O as the mineralizing agent by hydrothermal method.In the case of 1 kg/batch production,the effects of synthesis conditions including solution concentration,reaction temperature,pressure,time and pH value on the grain size,particle morphology and crystal structure of SnO2 were systematically studied.The particles were characterized by X-ray diffraction（XRD） and transmission electron microscopy（TEM）.The results show that,the particle size can be well controlled in the range of 5-30 nm by adjusting the processing parameters such as reaction temperature and time when the crystal structure and particle morphology remain unchanged.The previous reports,the unusual dependences of the grain size of SnO2 on reaction temperature and time were found.The mechanism for such abnormal grain growth behavior was tentatively elucidated.

Effects of zinc on Fe-based catalysts during the synthesis of light olefins from the Fischer-Tropsch process

Fe‐based catalysts for the production of light olefins via the Fischer‐Tropsch synthesis were modi‐fied by adding a Zn promoter using both microwave‐hydrothermal and impregnation methods. The physicochemical properties of the resulting catalysts were determined by scanning electron mi‐croscopy, the Brunauer‐Emmett‐Teller method, X‐ray diffraction, H2 temperature‐programed re‐duction and X‐ray photoelectron spectroscopy. The results demonstrate that the addition of a Zn promoter improves both the light olefin selectivity over the catalyst and the catalyst stability. The catalysts prepared via the impregnation method, which contain greater quantities of surface ZnO, exhibit severe carbon deposition following activity trials. In contrast, those materials synthesized using the microwave‐hydrothermal approach show improved dispersion of Zn and Fe phases and decreased carbon deposition, and so exhibit better CO conversion and stability.

Characterization of ZnSe microspheres synthesized under different hydrothermal conditions

ZnSe microspheres were synthesized via a facile hydrothermal method under mild conditions using aqueous zinc nitrate and sodium selenite as raw materials. The effects of hydrothermal temperature, reaction time, concentration of NaOH and amount of hydrazine hydrate on the phase structure, morphology and size of final products were carefully investigated. The phase structures, morphologies and optical properties of the final products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and photoluminescence (PL) spectroscopy. ZnSe microspheres assembled by average size (about 20 nm) nanocrystals were prepared using 20 mL of 1 mol/L NaOH solution and 10 mL of hydrazine hydrate at 180 °C for 4 h. The results show that the products obtained at low hydrothermal temperature and short reaction time have poor crystallinity and contain impurity phases. The appropriate NaOH concentration and amount of hydrazine hydrate ensure to obtain pure ZnSe with spherical morphology and better luminescence property.

Hydrothermal synthesis of silver nanoparticles in Arabic gum aqueous solutions

Finely divided silver nanoparticles were synthesized via the hydrothermal method. Arabic gum （AG） was used as both the reductant and steric stabilizer without any other surfactant. By adjusting the reaction temperature, mass ratio of AG to AgNO3, and reaction time, silver nanoparticles with different morphological characteristics could be obtained. The products were characterized by UV-Vis, FTIR, TEM, SEM, and XRD measurements. It was found that temperature and AG played an important role in the synthesis of mono-disperse silver nanoparticles. Well dispersed and quasispherical silver nanoparticles were obtained under the optimal synthesis conditions of 10 mmol/L AgNO3, m（AG）/m（AgN03）= l：1, 160 ℃ and 3 h.

Electrochemical performance of LiFePO_(4)-Li_(3)V_(2)(PO_4)_3 composite material prepared by solid-hydrothermal method

LiFePO4-Li3V2（PO4）3 composites were synthesized by solid-hydrothermal method and by ball milling,respectively.The electrochemical performance of the solid-hydrothermally obtained materials（C-LFVP） was significantly improved compared with LiFePO4（LFP） and Li3V2（PO4）3（LVP）,and it was also much better than that of the ball-milled LiFePO4-Li3V2（PO4）3（P-LFVP）.C-LFVP and P-LFVP both had four REDOX peaks（voltage plateaus）,which coincided with that of LFP and LVP.Some new trace substances were found in C-LFVP which had more perfect morphology,this was responsible for the better electrochemical performance of C-LFVP than P-LFVP.

Comparison of Two Methods for Measuring Flavonoid Content of Fagopyrum megaspartanium Leaves

[Objective] The aim was to study the flavonoid content of Fagopyrum megaspartanium leaves by water bath and ultrasonic extractions.[Method] By using water bath extraction and ultrasonic extraction,the total flavonoid content in buckwheat leaves was measured with UV spectrophotometer.[Result] The optimum wavelength for determination of the content of flavonoid extracted from buckwheat leaves was 420 nm;the content of total flavonoid extracted by ultrasonic extraction and water bath extraction from buckwheat were 5.26% and 5.40% respectively;and the average total flavonoid content by water bath extraction was significantly higher than that by ultrasonic extraction.[Conclusion] The result is significant for the improvement of flavonoid content measurement of buckwheat.

Resource allocation based on fairness and QoS provisioning for OFDMA-WLAN system

To satisfy different service requirements of multiple users in the orthogo nal frequency division multiple access wireless local area network OFDMA-WLAN system downlink transmission a resource allocation algorithm based on fairness and quality of service QoS provisioning is proposed. Different QoS requirements are converted into different rate requirements to calculate the QoSs atisfaction level.The optimization object is revised as a fairness-driven resource optimization function to provide fairness. The complex resource allocation problem is divided into channel allocation and power assignment sub-problems. The sub-problems are solved by the bipartite graph matching and water-filling based method.Compared with other algorithms the proposed algorithm sacrifices less data rate for higher fairnes and QoS satisfaction.The sim ulation results show that the proposed algorithm is capableo fp rovi ding QoS and fairness and performs better in a tradeoff among QoS fairness and data rate.

Facile H2O2 Hydrothermal Synthesis of Bimodal Mesoporous Silica MCM-48 Spheres

The ordered bimodal mesoporous silica MCM-48 spheres were facile synthesized by mild- temperature post-synthesis H2O2 hydrothermal treatment of as-synthesized MCM-48. The results showed that H2O2 is indispensable for simultaneously removing organic templates and forming ordered bimodal mesoporous silica MCM-48 spheres. The bimodal mesoporous MCM-48 was characterized by X-ray diffraction, transmission electron micrographs, FT-IR, and N2 adsorption-desorption, and a possible mechanism was proposed for the formation of bimodal mesoporous MCM-48.

Microwave-hydrothermal preparation of flower-like ZnO microstructure and its photocatalytic activity

The flower-like ZnO microstructure was prepared by a straightforward microwave-hydrothermal technique using zinc chloride and arginine solution as reactants. The as-synthesized crystal structure and morphology were characterized by X-ray diffraction （XRD）, scanning electron microscopy （SEM） and the optical properties of the ZnO nanostructure were studied by Raman and photoluminescence （PL） spectra, which confirms the high crystal quality of ZnO microstructure. The as-synthesized ZnO flowers exhibit a significant enhancement of photocatalytic capability toward degrading methyl blue （MB） under UV light, the photodegradation of MB reaches 95.60%, only within 2 h of adding the as-synthesized ZnO in the MB solution under UV irradiation. Furthermore, the photodegradation could be described as the pseudo-first-order kinetics with degradation rate constant of 1.0675-1.6275 h-1, which is relative to the morphology of the structures.

Synthesis of Flower-like NaY（MoO4）2 and Optical Property of NaY（MoO4）2：Eu^3＋

Flower-like NaY（MoO4）2 particles were synthesized through a microwave-assisted hydrother- mal process followed by a subsequent calcination process. The products were characterized by X-ray diffraction, X-ray photoelectron spectroscopy, field-emission scanning electron mi- croscopy. The possible formation mechanism of the flower-like NaY（MoO4）2 precursor was proposed. The NaY（MoO4）2：Eu3＋ phosphors were also prepared and their luminescence properties showed the NaY（MoO4）2：Eu^3＋ materials with the emission peak at 612 nm had potential application as a red phosphor for white light-emitting diodes. Furthermore, the microwave-assisted hydrothermal process followed by a subsequent calcination process could be extended to prepare the other lanthanide molybdates with the flower-like morphology.

Experimental study of water aging on asphalt during service life of pavements

In order to further simulate the real condition of pavements during the service life,moisture is considered in long-term aging tests based on the existing researches about thermal aging and oxidation aging of asphalt.Water is injected into the pressure aging vessel（PAV）to simulate the aging process during the service life.The performance-based strategic highway research program（SHRP）parameters G/sinδ and S（t）are adopted to evaluate the high-temperature properties and low-temperature properties of the aged asphalt,respectively.The Thailand 90# asphalt,the modified Thailand 90# asphalt and the Shell 70# asphalt are used in the test.It is found that the moisture has a significant influence on parameter G/sinδ when combined with heat and oxygen,so water aging makes high-temperature performance decay more seriously.But the low-temperature performance does not change remarkably after water aging.Since the influences of temperature,oxygen and water are taken into account in the PAV test,the accuracy of asphalt aging tests can be improved and the long-term aging process of asphalt pavement can be exactly simulated.

Microspheres of graphene oxide coupled to N-doped Bi_2O_2CO_3 for visible light photocatalysis

Hierarchical microspheres of a graphene oxide（GO） coupled to N‐doped（BiO）2CO3 composite（N‐BOC‐GO） was synthesized by a simple hydrothermal approach. The N‐BOC‐GO composite gave enhancement in photocatalytic activity compared to the pure BOC and N‐BOC samples. With 1.0wt% GO, 62% NO removal was obtained with N‐BOC‐GO. The factors enhancing the photocatalytic performance were the high electron‐withdrawing ability and high conductivity of GO and improved visible light‐harvesting ability of N‐BOC‐GO with a 3D hierarchical architecture due to the surface scattering and reflecting（SSR） effect. An effective charge transfer from N‐BOC to GO was demonstrated by the much weakened photoluminescene intensity of the N‐BOC‐GO composite. This work highlights the potential application of GO‐based photocatalysts in air purification.

Evaluation of volcanic reservoirs with the "QAPM mineral model" using a genetic algorithm

Gas-bearing volcanic reservoirs have been found in the deep Songliao Basin, China. Choosing proper interpretation parameters for log evaluation is difficult due to complicated mineral compositions and variable mineral contents. Based on the QAPF classification scheme given by IUGS, we propose a method to determine the mineral contents of volcanic rocks using log data and a genetic algorithm. According to the QAPF scheme, minerals in volcanic rocks are divided into five groups： Q（quartz）, A （Alkaline feldspar）, P （plagioclase）, M （mafic） and F （feldspathoid）. We propose a model called QAPM including porosity for the volumetric analysis of reservoirs. The log response equations for density, apparent neutron porosity, transit time, gamma ray and volume photoelectrical cross section index were first established with the mineral parameters obtained from the Schlumberger handbook of log mineral parameters. Then the volumes of the four minerals in the matrix were calculated using the genetic algorithm （GA）. The calculated porosity, based on the interpretation parameters, can be compared with core porosity, and the rock names given in the paper based on QAPF classification according to the four mineral contents are compatible with those from the chemical analysis of the core samples.