The aerospace and military sectors have widely used AA7075, a type of 7075 aluminum alloy, due to its exceptional mechanical performance. Selective laser melting (SLM) is a highly effective method for producing intric...The aerospace and military sectors have widely used AA7075, a type of 7075 aluminum alloy, due to its exceptional mechanical performance. Selective laser melting (SLM) is a highly effective method for producing intricate metallic components, particularly in the case of aluminum alloys like Al-Si-Mg. Nevertheless, the production of high-strength AA7075 by SLM is challenging because of its susceptibility to heat cracking and elemental vaporization. In this study, AA7075 powders were mechanically mixed with SiC and TiC particles. Subsequently, this new type of AA7075 powder was effectively utilized in green laser printing to create solid components with fine-grain strengthening microstructures consisting of equiaxial grains. These as-printed parts exhibit a tensile strength of up to 350 MPa and a ductility exceeding 2.1%. Hardness also increases with the increasing content of mixed powder, highlighting the essential role of SiC and TiC in SLM for improved hardness and tensile strength performance. .展开更多
Introduction: Ureteroscopy is a minimally invasive endoscopic surgery which provides access to the ureter, pyelon and calyceal cavities via the urethra and the bladder. Laser ureteroscopy uses the laser as an energy s...Introduction: Ureteroscopy is a minimally invasive endoscopic surgery which provides access to the ureter, pyelon and calyceal cavities via the urethra and the bladder. Laser ureteroscopy uses the laser as an energy source to treat the stone and eliminate it naturally. Minimally invasive endoscopic methods are struggling to become popular in sub-Saharan African countries, especially for the upper urinary tract. The objective of our work was to report the results of our first laser ureteroscopy experience in the department. Materials and Methods: This was a prospective and descriptive study running from December 1, 2023 to February 19, 2024. Included in our study was any case of upper urinary tract stone operated by Laser ureteroscopy. The characteristics of the lithiasis were determined by CT scan. Sterilization of urine was verified by carrying out a cytobacteriological examination of urine. Ureteral lithiasis was approached by semi-rigid ureteroscopy. Renal lithiasis was immediately addressed by flexible ureteroscopy. Ureteroscopy was coupled with a Holmium YAG laser. A double J ureteral catheter was placed after the operation. A 230 µm laser fiber was used in each case with a generator with a power of 35 watts (Storz Calculase III type). An access sheath was used in all cases of flexible ureteroscopy. The parameters studied were: sociodemographic characteristics, lithiasis (site, size, number, density, topography), type of anesthesia, duration of laser use, duration of intervention, postoperative outcomes. Data entry and analysis were carried out using the software (Word 2016 and SPSS). Result: We collected 30 cases of laser ureteroscopy. The average age was 37 years with extremes of 9 and 79 years. The male gender was more represented. The most common age group was 24-39 years old. Renal colic was the most frequent reason for admission, 12 patients (40%). On physical examination, lumbar tenderness was present in 47% (14 patients). ECBU was positive in 4 patients (13%). CT scan was performed in all our patients before the intervention. The average stone size was 12 mm and the largest was 23 mm. The majority of stones, i.e. 59% (18 patients), had a density greater than 1000 HU. The stone was unique in 19 patients (63%). The location of the stone was pyelic in 8 patients or 27%. An impact on the upper urinary tract was found in 16 of our patients or 53%. General anesthesia was used in 25 patients (83%). A digital flexible ureteroscopy was used in 24 patients and a semi-rigid ureteroscopy (URS) in 6 patients. Full-course fragmentation was the most used therapeutic method, 9 patients or 32%. The average duration of interventions was 61 minutes. Drainage by double J catheter at the end of the procedure was performed in all our patients. The length of hospitalization was 24 hours. Only one case of failure in the USSR was recorded, and one case of failure was in the semi-rigid URS. Conclusion: Laser ureteroscopy is an effective minimally invasive surgery in the management of lithiasis of the upper urinary tract. It significantly reduces the length of hospitalization. Mastery of this technique and the acquisition of the equipment necessary for its implementation is an undeniable asset in the management of renal and ureteral lithiasis.展开更多
Background and Objective: Unwanted hair growth is a discomforting issue affecting both genders. People have tried various methods to get rid of this situation. This study aims to evaluate the efficacy and safety of a ...Background and Objective: Unwanted hair growth is a discomforting issue affecting both genders. People have tried various methods to get rid of this situation. This study aims to evaluate the efficacy and safety of a combined Alexandrite and Nd:YAG laser treatment for permanent hair removal, drawing insights from existing literature. Materials and Methods:This study included a total of 2127 patients (302 males, 1825 females) aged 18 - 65, with complete data, who underwent hair removal treatment between December 2018 and April 2021. These patients were treated using the Duetta laser system (Quanta system, Samarate, Italy), combining Alexandrite 755 nm and Nd:YAG 1064 nm wavelengths. The patients’ skin types were classified according to the Fitzpatrick classification scale. Target area/areas for laser hair removal was/were determined. Laser parameters, pulse counts, pain levels assessed through the Visual Pain Scale (VPS), and patient satisfaction were documented based on skin types. Findings: Across various skin types, Types I - II exhibited the highest treatment success rates (87%), with the axillary region achieving the highest rate (83%) and the face region achieving the lowest rate (75%). Pain scale analysis indicated that 98% of patients tolerated the procedure well. Patient satisfaction levels exceeded 90%. Evaluation of complication rates revealed minimal occurrences. Conclusion: The combined Alexandrite and Nd:YAG laser system demonstrates both efficacy and safety across diverse skin types, attributed to its notable success rates, minimal adverse effects, and high patient tolerance.展开更多
This paper reports on the ablation process of a pure Ti solid target immersed in a C-enriched acetone solution, leading to the production of titanium carbide (TiC) and Ti-C core-shell nanostructures. The used route of...This paper reports on the ablation process of a pure Ti solid target immersed in a C-enriched acetone solution, leading to the production of titanium carbide (TiC) and Ti-C core-shell nanostructures. The used route of synthesis is generally called pulsed laser ablation in liquid (PLAL). The presence of carbon structures in the solution contributed to the carbon content in the produced Ti-based nanomaterials. The atomic composition of the produced nanostructures was analyzed using SEM-EDS, while TEM micrographs revealed the formation of spherical TiC and core-shell nanostructures ranging from 40 to 100 nm. The identification of atomic planes by HRTEM confirmed a 10 nm diameter C-shell with a graphite structure surrounding the Ti-core. Raman spectroscopy allowed for the identification of D and G peaks for graphite and a Raman signal at 380 and 600 cm<sup>−1</sup>, assigned to TiC. The results contribute to the state-of-the-art production of TiC and Ti-C core-shell nanostructures using the PLAL route.展开更多
Background: Brain disorders have become more and more common today, due to both the aging population and the ever-expanding sports community. However, a new therapeutic technology called photobiomodulation (PBM) is gi...Background: Brain disorders have become more and more common today, due to both the aging population and the ever-expanding sports community. However, a new therapeutic technology called photobiomodulation (PBM) is giving hope to thousands of individuals in need. Traumatic brain injury (TBI), dementia, post traumatic stress (PTSD) and attention deficit (ADD) disorders are in many cases quickly and safely improved by PBM. PBM employs red or near-infrared (NIR) light (600 - 1100 nm) to stimulate healing, protect tissue from dying, increase mitochondrial function, improve blood flow, and tissue oxygenation. PBM can also act to reduce edema, increase antioxidants, decrease inflammation, protect against apoptosis, and modulate the microglial activation state. All these effects can occur when light is delivered to the head, and can be beneficial in both acute and chronic brain conditions. Methods: In this case series, we used a high power, FDA-approved superpulsed laser system applied to the head to treat four chronic stroke patients. Patients received as few as three 6 - 9 minute treatments over a one-week period. The follow up time varied, but in one case was two years. Results: Patients showed significant improvement in their speech and verbal skills. Improvements were also noticed in walking ability, limb movement, less numbness, and better vision. Conclusion: The use of PBM in stroke rehabilitation deserves to be tested in controlled clinical trials, because this common condition has no approved pharmaceutical treatment at present.展开更多
Leaf area index (LAI) is a key parameter for studying global terrestrial ecology and environment and has great ecological significance. How to accurately measure and calculate structural parameters of trees has become...Leaf area index (LAI) is a key parameter for studying global terrestrial ecology and environment and has great ecological significance. How to accurately measure and calculate structural parameters of trees has become an urgent matter. This paper reports the use of terrestrial laser scanning (TLS) as a measurement tool to achieve accurate LAI estimation through point cloud preprocessing measures, the LeWos algorithm, and voxel methods. The accuracy and feasibility of this indirect measurement method were explored. It is found that the single wood structure parameters extracted from TLS have a good linear relationship with manual measurement, and the extraction errors meet the requirements of real-scene conversion. The study also found when the voxel size is consistent with the minimum distance of the point cloud set by TLS instrument, it has a strong correlation with the measured value of canopy analyser. These results lay the foundation for conveniently and quickly obtaining structural parameters of trees, tree growth state detection, and canopy ecological benefit assessment.展开更多
The tunneling ionization (TI) is the most dominated ionization process in the production of terahertz radiation by two femtosecond lasers, although its validity above the ionization threshold of some gases is uncertai...The tunneling ionization (TI) is the most dominated ionization process in the production of terahertz radiation by two femtosecond lasers, although its validity above the ionization threshold of some gases is uncertain. In the present research, we employ a 1D fluid code to simulate the efficiency of the produced terahertz radiation by two femtosecond laser beams in air plasma. Two ionization models in the context of the TI process which are the Ammosov-Delone-Krainov (ADK) for noble gases and its developed molecular ADK (MO-ADK) model for molecular gases are intrinsically used to conduct this study. The main target of the present research is to examine the validity of these models Above-Threshold-Ionization (ATI) of these gases. For this purpose, we simulated the ionization rate and the power spectrum of the produced radiation, in addition we numerically evaluated the efficiency of the produced radiation as function of the input beams intensity at particular energy fraction factor, relative phase and initial pulse duration of these beams. These calculations conducted for a selected noble gas at varying energy levels and a chosen molecular air plasma gas at different quantum numbers. Numerical results near and above the ionization threshold of the selected gases have clarified that the ADK and MO-ADK model are successful valid to study the efficiency of the produced THz radiation at low energy levels and small quantum numbers of the selected gases, meanwhile, with any further increase in the energy level and the quantum number values of these gases, both of the ADK and MO-ADK are failed to correctly analyze the efficiency process and estimate its fundamental parameters.展开更多
After more than 30 years of scientific and social development, surveying and mapping technology by leaps and bounds, engineering surveying technology has undergone tremendous changes. In the process of protecting anci...After more than 30 years of scientific and social development, surveying and mapping technology by leaps and bounds, engineering surveying technology has undergone tremendous changes. In the process of protecting ancient buildings, it is necessary to obtain the precise dimensions of architectural details. In this study, the path of 3D laser scanning combined with BIM technology is explored. Taking the observation and protection of the ancestral hall of the Liu family as an example, this study aims to draw drawings that reflect the relevant information about the ancient buildings, the accurate three-dimensional model of ancient buildings is established with BIM technology, which provides new methods and ideas for the research and protection of ancient buildings. .展开更多
Confocal laser endomicroscopy (CLE) is a new endoscopic imaging technology that allows real-time, high-resolution observation of tomographic images of mucosal cells and subcellular levels in vivo, detecting microscopi...Confocal laser endomicroscopy (CLE) is a new endoscopic imaging technology that allows real-time, high-resolution observation of tomographic images of mucosal cells and subcellular levels in vivo, detecting microscopic structural changes in mucosal morphology, and its in vivo immediate pathological diagnostic capability can avoid delays in mucosal pathological diagnosis and reduce the pain caused by repeated biopsies. CLE is known as “optical biopsy” and compared with other endoscopic techniques, it has obvious advantages. CLE systems include probe-based confocal laser endomicroscopy (pCLE) and endoscope-based confocal laser endomicroscopy (eCLE). Since 2006, CLE has been widely used for the evaluation of various lesions in the digestive system, including esophageal, gastric, and colonic neoplasia, pancreatic cysts and solid lesions, and inflammatory bowel disease. The advent of CLE has made in vivo microscopic imaging possible, which has changed the endoscopic screening and diagnosis of multiple gastrointestinal (GI) lesions. However, the value of its use in GI diseases is still controversial. In this review, we focus on the application of CLE in the field of esophageal diseases.展开更多
文摘The aerospace and military sectors have widely used AA7075, a type of 7075 aluminum alloy, due to its exceptional mechanical performance. Selective laser melting (SLM) is a highly effective method for producing intricate metallic components, particularly in the case of aluminum alloys like Al-Si-Mg. Nevertheless, the production of high-strength AA7075 by SLM is challenging because of its susceptibility to heat cracking and elemental vaporization. In this study, AA7075 powders were mechanically mixed with SiC and TiC particles. Subsequently, this new type of AA7075 powder was effectively utilized in green laser printing to create solid components with fine-grain strengthening microstructures consisting of equiaxial grains. These as-printed parts exhibit a tensile strength of up to 350 MPa and a ductility exceeding 2.1%. Hardness also increases with the increasing content of mixed powder, highlighting the essential role of SiC and TiC in SLM for improved hardness and tensile strength performance. .
文摘Introduction: Ureteroscopy is a minimally invasive endoscopic surgery which provides access to the ureter, pyelon and calyceal cavities via the urethra and the bladder. Laser ureteroscopy uses the laser as an energy source to treat the stone and eliminate it naturally. Minimally invasive endoscopic methods are struggling to become popular in sub-Saharan African countries, especially for the upper urinary tract. The objective of our work was to report the results of our first laser ureteroscopy experience in the department. Materials and Methods: This was a prospective and descriptive study running from December 1, 2023 to February 19, 2024. Included in our study was any case of upper urinary tract stone operated by Laser ureteroscopy. The characteristics of the lithiasis were determined by CT scan. Sterilization of urine was verified by carrying out a cytobacteriological examination of urine. Ureteral lithiasis was approached by semi-rigid ureteroscopy. Renal lithiasis was immediately addressed by flexible ureteroscopy. Ureteroscopy was coupled with a Holmium YAG laser. A double J ureteral catheter was placed after the operation. A 230 µm laser fiber was used in each case with a generator with a power of 35 watts (Storz Calculase III type). An access sheath was used in all cases of flexible ureteroscopy. The parameters studied were: sociodemographic characteristics, lithiasis (site, size, number, density, topography), type of anesthesia, duration of laser use, duration of intervention, postoperative outcomes. Data entry and analysis were carried out using the software (Word 2016 and SPSS). Result: We collected 30 cases of laser ureteroscopy. The average age was 37 years with extremes of 9 and 79 years. The male gender was more represented. The most common age group was 24-39 years old. Renal colic was the most frequent reason for admission, 12 patients (40%). On physical examination, lumbar tenderness was present in 47% (14 patients). ECBU was positive in 4 patients (13%). CT scan was performed in all our patients before the intervention. The average stone size was 12 mm and the largest was 23 mm. The majority of stones, i.e. 59% (18 patients), had a density greater than 1000 HU. The stone was unique in 19 patients (63%). The location of the stone was pyelic in 8 patients or 27%. An impact on the upper urinary tract was found in 16 of our patients or 53%. General anesthesia was used in 25 patients (83%). A digital flexible ureteroscopy was used in 24 patients and a semi-rigid ureteroscopy (URS) in 6 patients. Full-course fragmentation was the most used therapeutic method, 9 patients or 32%. The average duration of interventions was 61 minutes. Drainage by double J catheter at the end of the procedure was performed in all our patients. The length of hospitalization was 24 hours. Only one case of failure in the USSR was recorded, and one case of failure was in the semi-rigid URS. Conclusion: Laser ureteroscopy is an effective minimally invasive surgery in the management of lithiasis of the upper urinary tract. It significantly reduces the length of hospitalization. Mastery of this technique and the acquisition of the equipment necessary for its implementation is an undeniable asset in the management of renal and ureteral lithiasis.
文摘Background and Objective: Unwanted hair growth is a discomforting issue affecting both genders. People have tried various methods to get rid of this situation. This study aims to evaluate the efficacy and safety of a combined Alexandrite and Nd:YAG laser treatment for permanent hair removal, drawing insights from existing literature. Materials and Methods:This study included a total of 2127 patients (302 males, 1825 females) aged 18 - 65, with complete data, who underwent hair removal treatment between December 2018 and April 2021. These patients were treated using the Duetta laser system (Quanta system, Samarate, Italy), combining Alexandrite 755 nm and Nd:YAG 1064 nm wavelengths. The patients’ skin types were classified according to the Fitzpatrick classification scale. Target area/areas for laser hair removal was/were determined. Laser parameters, pulse counts, pain levels assessed through the Visual Pain Scale (VPS), and patient satisfaction were documented based on skin types. Findings: Across various skin types, Types I - II exhibited the highest treatment success rates (87%), with the axillary region achieving the highest rate (83%) and the face region achieving the lowest rate (75%). Pain scale analysis indicated that 98% of patients tolerated the procedure well. Patient satisfaction levels exceeded 90%. Evaluation of complication rates revealed minimal occurrences. Conclusion: The combined Alexandrite and Nd:YAG laser system demonstrates both efficacy and safety across diverse skin types, attributed to its notable success rates, minimal adverse effects, and high patient tolerance.
文摘This paper reports on the ablation process of a pure Ti solid target immersed in a C-enriched acetone solution, leading to the production of titanium carbide (TiC) and Ti-C core-shell nanostructures. The used route of synthesis is generally called pulsed laser ablation in liquid (PLAL). The presence of carbon structures in the solution contributed to the carbon content in the produced Ti-based nanomaterials. The atomic composition of the produced nanostructures was analyzed using SEM-EDS, while TEM micrographs revealed the formation of spherical TiC and core-shell nanostructures ranging from 40 to 100 nm. The identification of atomic planes by HRTEM confirmed a 10 nm diameter C-shell with a graphite structure surrounding the Ti-core. Raman spectroscopy allowed for the identification of D and G peaks for graphite and a Raman signal at 380 and 600 cm<sup>−1</sup>, assigned to TiC. The results contribute to the state-of-the-art production of TiC and Ti-C core-shell nanostructures using the PLAL route.
文摘Background: Brain disorders have become more and more common today, due to both the aging population and the ever-expanding sports community. However, a new therapeutic technology called photobiomodulation (PBM) is giving hope to thousands of individuals in need. Traumatic brain injury (TBI), dementia, post traumatic stress (PTSD) and attention deficit (ADD) disorders are in many cases quickly and safely improved by PBM. PBM employs red or near-infrared (NIR) light (600 - 1100 nm) to stimulate healing, protect tissue from dying, increase mitochondrial function, improve blood flow, and tissue oxygenation. PBM can also act to reduce edema, increase antioxidants, decrease inflammation, protect against apoptosis, and modulate the microglial activation state. All these effects can occur when light is delivered to the head, and can be beneficial in both acute and chronic brain conditions. Methods: In this case series, we used a high power, FDA-approved superpulsed laser system applied to the head to treat four chronic stroke patients. Patients received as few as three 6 - 9 minute treatments over a one-week period. The follow up time varied, but in one case was two years. Results: Patients showed significant improvement in their speech and verbal skills. Improvements were also noticed in walking ability, limb movement, less numbness, and better vision. Conclusion: The use of PBM in stroke rehabilitation deserves to be tested in controlled clinical trials, because this common condition has no approved pharmaceutical treatment at present.
文摘Leaf area index (LAI) is a key parameter for studying global terrestrial ecology and environment and has great ecological significance. How to accurately measure and calculate structural parameters of trees has become an urgent matter. This paper reports the use of terrestrial laser scanning (TLS) as a measurement tool to achieve accurate LAI estimation through point cloud preprocessing measures, the LeWos algorithm, and voxel methods. The accuracy and feasibility of this indirect measurement method were explored. It is found that the single wood structure parameters extracted from TLS have a good linear relationship with manual measurement, and the extraction errors meet the requirements of real-scene conversion. The study also found when the voxel size is consistent with the minimum distance of the point cloud set by TLS instrument, it has a strong correlation with the measured value of canopy analyser. These results lay the foundation for conveniently and quickly obtaining structural parameters of trees, tree growth state detection, and canopy ecological benefit assessment.
文摘The tunneling ionization (TI) is the most dominated ionization process in the production of terahertz radiation by two femtosecond lasers, although its validity above the ionization threshold of some gases is uncertain. In the present research, we employ a 1D fluid code to simulate the efficiency of the produced terahertz radiation by two femtosecond laser beams in air plasma. Two ionization models in the context of the TI process which are the Ammosov-Delone-Krainov (ADK) for noble gases and its developed molecular ADK (MO-ADK) model for molecular gases are intrinsically used to conduct this study. The main target of the present research is to examine the validity of these models Above-Threshold-Ionization (ATI) of these gases. For this purpose, we simulated the ionization rate and the power spectrum of the produced radiation, in addition we numerically evaluated the efficiency of the produced radiation as function of the input beams intensity at particular energy fraction factor, relative phase and initial pulse duration of these beams. These calculations conducted for a selected noble gas at varying energy levels and a chosen molecular air plasma gas at different quantum numbers. Numerical results near and above the ionization threshold of the selected gases have clarified that the ADK and MO-ADK model are successful valid to study the efficiency of the produced THz radiation at low energy levels and small quantum numbers of the selected gases, meanwhile, with any further increase in the energy level and the quantum number values of these gases, both of the ADK and MO-ADK are failed to correctly analyze the efficiency process and estimate its fundamental parameters.
文摘After more than 30 years of scientific and social development, surveying and mapping technology by leaps and bounds, engineering surveying technology has undergone tremendous changes. In the process of protecting ancient buildings, it is necessary to obtain the precise dimensions of architectural details. In this study, the path of 3D laser scanning combined with BIM technology is explored. Taking the observation and protection of the ancestral hall of the Liu family as an example, this study aims to draw drawings that reflect the relevant information about the ancient buildings, the accurate three-dimensional model of ancient buildings is established with BIM technology, which provides new methods and ideas for the research and protection of ancient buildings. .
文摘Confocal laser endomicroscopy (CLE) is a new endoscopic imaging technology that allows real-time, high-resolution observation of tomographic images of mucosal cells and subcellular levels in vivo, detecting microscopic structural changes in mucosal morphology, and its in vivo immediate pathological diagnostic capability can avoid delays in mucosal pathological diagnosis and reduce the pain caused by repeated biopsies. CLE is known as “optical biopsy” and compared with other endoscopic techniques, it has obvious advantages. CLE systems include probe-based confocal laser endomicroscopy (pCLE) and endoscope-based confocal laser endomicroscopy (eCLE). Since 2006, CLE has been widely used for the evaluation of various lesions in the digestive system, including esophageal, gastric, and colonic neoplasia, pancreatic cysts and solid lesions, and inflammatory bowel disease. The advent of CLE has made in vivo microscopic imaging possible, which has changed the endoscopic screening and diagnosis of multiple gastrointestinal (GI) lesions. However, the value of its use in GI diseases is still controversial. In this review, we focus on the application of CLE in the field of esophageal diseases.
