CaMg(CO3)2microspheres were prepared and used as hard templates to fabricate a series of CaMg(CO3)2@Ag2CO3composite microspheres via a fast and low‐cost ion exchange process.The effects of ion exchange time and tempe...CaMg(CO3)2microspheres were prepared and used as hard templates to fabricate a series of CaMg(CO3)2@Ag2CO3composite microspheres via a fast and low‐cost ion exchange process.The effects of ion exchange time and temperature on the physicochemical properties and photocatalytic activities of the composite microspheres were studied through photocatalytic degradation of Acid Orange II under xenon lamp irradiation.The obtained samples were analyzed by X‐ray diffraction,scanning electron microscopy,Fourier transform infrared spectroscopy,UV‐vis diffuse reflectance spectroscopy,N2physical adsorption,and photocurrent tests.The CaMg(CO3)2@Ag2CO3sample with the highest activity was obtained with an ion exchange time of4h and temperature of40°C.The degradation rate of Acid Orange II by this sample reached83.3%after15min of light irradiation,and the sample also performed well in phenol degradation.The CaMg(CO3)2@Ag2CO3produced under these ion exchange conditions showed a well‐ordered hierarchical morphology with small particle sizes,which was beneficial to light absorption and the transfer of photoelectrons(e-)and holes(h+)to the catalyst surface.Moreover,the separation of photogenerated carriers over the composites was greatly improved relative to bare CaMg(CO3)2.Despite the very low content of Ag2CO3(2.56%),excellent photocatalytic performance was obtained over the CaMg(CO3)2@Ag2CO3microspheres.展开更多
A novel flower-like hydrated magnesium carbonate hydroxide, Mg5 （CO3 ）4 （OH）2·4H2O, with micro-structure composed of individual thin nano-sheets was synthesized using a facile solution route without the use o...A novel flower-like hydrated magnesium carbonate hydroxide, Mg5 （CO3 ）4 （OH）2·4H2O, with micro-structure composed of individual thin nano-sheets was synthesized using a facile solution route without the use of template or organic surfactant. Reaction time has an important effect on the final morphology of the product. The micro-structure and morphology of Mg5 （CO3）4 （OH）2·4H2O were characterized by means of X-ray diffractometry （XRD）, fieldemission scanning electron microscopy（FE-SEM）. Brunauer-Emmett-Teller（BET） surface areas of the samples were also measured. The probable formation mechanism of flower-like micro-structure was discussed. It was found that Mg5 （CO3）4（ OH）2·4H2O with flower-like micro-structure was a novel and efficient catalyst for the synthesis of diphenyl carbonate （DPC） by transesterification of dimethyl carbonate （DMC） with phenol.展开更多
Aiming to improve the reactive adsorption desulfurization（RADS） performances of Ni/Zn O adsorbents,ZnxAly（OH）2（CO3）z·x H2 O precursor is synthesized by coprecipitation of Zn2＋,AlO-2,and CO2-3; the Zn OZn6A...Aiming to improve the reactive adsorption desulfurization（RADS） performances of Ni/Zn O adsorbents,ZnxAly（OH）2（CO3）z·x H2 O precursor is synthesized by coprecipitation of Zn2＋,AlO-2,and CO2-3; the Zn OZn6Al2O9 composite oxides are obtained by the calcination of ZnxAly（OH）2（CO3）z·x H2 O precursor,and the Ni/Zn O-Zn6Al2O9（6.0 wt% Ni O） adsorbents are prepared by wetness impregnation method. The phase,acid strength,acid type and quantity,morphology,and thermal properties were characterized by X-ray diffraction,temperature-programmed desorption of ammonia,pyridine-adsorbed infrared spectrum,high-resolution transmission electron microscopy,and Thermo Gravimetry-Derivative Thermo Gravimetry（TG-DTG）,respectively. The breakthrough sulfur capacities of six adsorbents are between 34.2 and 47.9 mg/gcat. The kinetic studies indicated that the active energy of RADS（49.4 k J/mol） could reach nano-sized Zn O,the particle size of is about 12.0 nm. All the excellent RADS performances can be due to the high SBET. Also,there are some extents of aromatization reactions that occur,which can be contributed to the B？nsted acid rooted in Zn6Al2O9 composite oxide,and the octane number of products can be preserved well.展开更多
LiNi0.8Co0.2O2 particles were modified by Co3（PO4）2 coating. The effects of the Co3（PO4）2 coating on the structure and electrochemical properties of the LiNi0.8Co0.2O2 cathode material were investigated. The Co3...LiNi0.8Co0.2O2 particles were modified by Co3（PO4）2 coating. The effects of the Co3（PO4）2 coating on the structure and electrochemical properties of the LiNi0.8Co0.2O2 cathode material were investigated. The Co3（PO4）2 coating forms a thin layer on the surface of the LiNi0.8Co0.2O2 material and a solid solution by interacting with the LiNi0.8Co0.2O2 core material during calcination at 700℃ for 4 h. Charge-discharge experiment results show that the Co3（PO4）2 coating improves the cycling stability of the LiNi0.8Co0.2O2 cathode material. The capacity retention of the pristine LiNi0.8Co0.2O2 cathode after 50 cycles is 83.6%, whereas it is 91.7% in the case of the LiNi0.8Co0.2O2 cathode coated with 1 wt.% Co3（PO4）2. Storage tests of the 4.35 V charged electrode at 60℃ after a month show that the Co3（POg）2-coated sample exhibits good storage properties compared with the pristine sample.展开更多
基金supported by the Natural Science Youth Foundation of Jiangsu Province,China(BK20130198)Fundamental Research Funds for the Central Universities,China(2013XK07)~~
基金supported by the National Natural Science Foundation of China(21567008,21607064,21707055,21763011)Program of Qingjiang Excellent Young Talents,Jiangxi University of Science and Technology+2 种基金Program of 5511 Talents in Scientific Technological Innovation of Jiangxi Province(20165BCB18014)Academic and Technical Leaders of the Main Disciplines in Jiangxi Province(20172BCB22018)Jiangxi Province Natural Science Foundation China(20161BAB203090,20161BAB213083,20171ACB21041)~~
文摘CaMg(CO3)2microspheres were prepared and used as hard templates to fabricate a series of CaMg(CO3)2@Ag2CO3composite microspheres via a fast and low‐cost ion exchange process.The effects of ion exchange time and temperature on the physicochemical properties and photocatalytic activities of the composite microspheres were studied through photocatalytic degradation of Acid Orange II under xenon lamp irradiation.The obtained samples were analyzed by X‐ray diffraction,scanning electron microscopy,Fourier transform infrared spectroscopy,UV‐vis diffuse reflectance spectroscopy,N2physical adsorption,and photocurrent tests.The CaMg(CO3)2@Ag2CO3sample with the highest activity was obtained with an ion exchange time of4h and temperature of40°C.The degradation rate of Acid Orange II by this sample reached83.3%after15min of light irradiation,and the sample also performed well in phenol degradation.The CaMg(CO3)2@Ag2CO3produced under these ion exchange conditions showed a well‐ordered hierarchical morphology with small particle sizes,which was beneficial to light absorption and the transfer of photoelectrons(e-)and holes(h+)to the catalyst surface.Moreover,the separation of photogenerated carriers over the composites was greatly improved relative to bare CaMg(CO3)2.Despite the very low content of Ag2CO3(2.56%),excellent photocatalytic performance was obtained over the CaMg(CO3)2@Ag2CO3microspheres.
基金Supported by the National Natural Science Foundation of China(Nos.20671011,20331010,90406002and90406024)the 111 Project(No.B07012)the Key Laboratory of Structural Chemistry Foundation(No.060017).
文摘A novel flower-like hydrated magnesium carbonate hydroxide, Mg5 （CO3 ）4 （OH）2·4H2O, with micro-structure composed of individual thin nano-sheets was synthesized using a facile solution route without the use of template or organic surfactant. Reaction time has an important effect on the final morphology of the product. The micro-structure and morphology of Mg5 （CO3）4 （OH）2·4H2O were characterized by means of X-ray diffractometry （XRD）, fieldemission scanning electron microscopy（FE-SEM）. Brunauer-Emmett-Teller（BET） surface areas of the samples were also measured. The probable formation mechanism of flower-like micro-structure was discussed. It was found that Mg5 （CO3）4（ OH）2·4H2O with flower-like micro-structure was a novel and efficient catalyst for the synthesis of diphenyl carbonate （DPC） by transesterification of dimethyl carbonate （DMC） with phenol.
文摘Aiming to improve the reactive adsorption desulfurization（RADS） performances of Ni/Zn O adsorbents,ZnxAly（OH）2（CO3）z·x H2 O precursor is synthesized by coprecipitation of Zn2＋,AlO-2,and CO2-3; the Zn OZn6Al2O9 composite oxides are obtained by the calcination of ZnxAly（OH）2（CO3）z·x H2 O precursor,and the Ni/Zn O-Zn6Al2O9（6.0 wt% Ni O） adsorbents are prepared by wetness impregnation method. The phase,acid strength,acid type and quantity,morphology,and thermal properties were characterized by X-ray diffraction,temperature-programmed desorption of ammonia,pyridine-adsorbed infrared spectrum,high-resolution transmission electron microscopy,and Thermo Gravimetry-Derivative Thermo Gravimetry（TG-DTG）,respectively. The breakthrough sulfur capacities of six adsorbents are between 34.2 and 47.9 mg/gcat. The kinetic studies indicated that the active energy of RADS（49.4 k J/mol） could reach nano-sized Zn O,the particle size of is about 12.0 nm. All the excellent RADS performances can be due to the high SBET. Also,there are some extents of aromatization reactions that occur,which can be contributed to the B？nsted acid rooted in Zn6Al2O9 composite oxide,and the octane number of products can be preserved well.
基金the National Natural Science Foundation of China (No. 50604018)
文摘LiNi0.8Co0.2O2 particles were modified by Co3（PO4）2 coating. The effects of the Co3（PO4）2 coating on the structure and electrochemical properties of the LiNi0.8Co0.2O2 cathode material were investigated. The Co3（PO4）2 coating forms a thin layer on the surface of the LiNi0.8Co0.2O2 material and a solid solution by interacting with the LiNi0.8Co0.2O2 core material during calcination at 700℃ for 4 h. Charge-discharge experiment results show that the Co3（PO4）2 coating improves the cycling stability of the LiNi0.8Co0.2O2 cathode material. The capacity retention of the pristine LiNi0.8Co0.2O2 cathode after 50 cycles is 83.6%, whereas it is 91.7% in the case of the LiNi0.8Co0.2O2 cathode coated with 1 wt.% Co3（PO4）2. Storage tests of the 4.35 V charged electrode at 60℃ after a month show that the Co3（POg）2-coated sample exhibits good storage properties compared with the pristine sample.
