Network Resource Provisioning for IP over Multi-Granular Optical Networks

In the internet protocol（IP） over multi-granular optical switch network （IP/MG-OXC）, the network node is a typical multilayer switch comprising several layers, the IP packet switching （PXC） layer, wavelength switching （WXC） layer and fiber switching （FXC） layer. This network is capable of both IP layer grooming and wavelength grooming in a hierarchical manner. Resource provisioning in the multi-granular network paradigm is called hierarchical grooming problem. An integer linear programming （ILP） model is proposed to formulate the problem. An iterative heuristic approach is developed for solving the problem in large networks. Case study shows that IP/MG-OXC network is much more extendible and can significantly save the overall network cost as compared with IP over wavelength division multiplexing network.

Impact of Optical Hop Constraints on the IP/MPLS-over-WSON Networks CAPEX

In this work,the impact of hop constraints on the CAPEX of multi-layer IP/MPLS over WSON networks is evaluated under different scenarios. By routing lightpaths with different number of transparent hops,the cost of networks varies significantly. This effect is thoroughly analyzed with a heuristic algorithm for different network topologies belonging to some European network operators. The main conclusion extracted is that limiting the transparent reach in such multi-layer networks can give a good tradeoff between CAPEX of IP/MPLS networks and WSON networks,and even lead to signifi cant savings in CAPEX when compared to longer lightpaths routing strategies.

AN Experimental Optical Fiber WDM System with 12 Channels

An optical WDM transmissiou system using 3 EDFAs with 12 channels and a totaltransmission length of 250 km is introduced.The total hit rate of this system is 3.6Gb/s.This system works well with low hit-error-rate.It is a WDM system with the most channelsin China.

Study on Wevelength Allocation Algorithm and Its Optimization of WDM All Optical Networks

１．ＩｎｔｒｏｄｕｃｔｉｏｎＷａｖｅｌｅｎｇｔｈｒｏｕｔｅｄｏｐｔｉｃａｌｎｅｔｗｏｒｋｓ（ＷＲＯＮｓ）ｗｉｔｈｏｕｔｉｎｔｅｒｍｅｄｉａｔｅｗａｖｅｌｅｎｇｔｈｔｒａｎｓｌａｔｉｏｎｏｆｅｒａｎｅｎｏｒｍｏｕｓｐｏｔｅｎｔｉａｌｉｎｓｉｍｐｌｉｆ...

A Novel Optical Control Plane for Switching an Electro-Optical Hybrid Node in Translucent WDM Optical Networks

In a translucent network scenario, development of an optical control plane (OCP) that is aware of the location and number of available regenerators and all-optical wavelength converters (AOWCs) is of paramount importance. However, current generalized multiprotocol label switching (GMPLS) protocol suite does not consider the distribution of regenerator and AOWC availability information to all the network nodes. In this paper, we propose a novel optical control plane (OCP) architecture that 1) disseminates information about network components (i.e. regenerators and AOWCs) to all the network nodes, and 2) evaluates candidate routes which use fewest amounts of network components. Performance of the proposed OCP is compared with a recently proposed hybrid OCP approach in terms of blocking performance, number of deployed components and lightpath establishment setup times. The obtained simulation results show that the proposed OCP approach demonstrates low connection blocking and establishes lightpaths by 1) minimizing the overall network cost owing to the deployment of minimum total number of network components, and 2) demonstrating acceptable lightpath establishment setup times at all traffic loads. Further, the proposed OCP methodology is compatible and suitable for controlling the operations of a novel electro-optical hybrid translucent node which is a latency efficient technology capable of delivering a cost effective implementation suitable for large scale deployment.

Design and Simulation of Intelligent Optical WDM Switching Node Based on Erlang Traffic Model

In this paper we propose a new architectural switching nodes consisting of two processing nodes that follow Erlang B and Erlang C traffic respectively. The developed model is used to best utilize the given number of output channels to achieve the least blocking probability. An appropriate mathematical model has been further devised and its call blocking probability has been enunciated. Performance of the model has been evaluated for different values of blocking probabilities. It has been observed that the performance of the network is well satisfactory for different design parameters.

Impact of Channel Dynamics, Combined Nonlinearities and ASE Noise on Transmission Performance of all Optical Star WDM Networks

For all optical Wavelength Division Multiplexing (WDM) network based on G.653 fibers, we investigate the quality factor deterioration due to combined nonlinear effects and Amplified spontaneous emission (ASE) noise for system parameters based on ITU-T Recommendation G.692. The investigation: (a) emphasizes on stimulated Raman scattering (SRS) and four wave mixing (FWM) effects which are the dominant nonlinearities known to limit WDM system performance and (b) accounts for beating between nonlinearities and beating between ASE noise and nonlinearities. Using the proposed model, performance of the worst affected channels due to SRS and FWM is compared and the results indicate that the worst affected channel due to SRS performs better and hence must be preferred for reliable and efficient transmission over the worst affected channel due to FWM. Further, the results suggest that to achieve a desired error rate (quality factor);there exists an optimal value of channel spacing for a given number of channels. The proposed theoretical model is also validated through extensive simulations over Rsoft OptSimTM simulator and the two sets of results are found to match, indicating that the proposed model accurately calculates the quality factor of the all optical WDM network.

Network Capacity Analysis of Server Version WDM Optical Networks

In this paper,a new architecture of optical networks—the optical network based on server system is considered.From the point of this new architecture,the network can be modeled as a server system with three type servers—the access server,the node server and the link server. The network performances such as cost,energy consume and network capacity can be affected by the capability of these three type servers.New ILP formulations are proposed to analyze the network capacity under two types of node severs,with and without wavelength converter.Computer simulations are conducted to evaluate the effectiveness of these new formulations.The study has shown that the network can achieve the same throughput under the two types of node servers and the network throughput increases when the maximum allowed variation increases.

Load Balancing in WDM Optical Networks with and without Wavelength-Continuity Constraints

In practical optical networks, there is often the same number of wavelengths in a fiber. But if it is not carefully designed, there will be much difference in link load among different fibers, and unnecessary wavelengths will be needed. This paper investigated this load balancing issues to minimize the wavelength requirements. Both Integer Linear Programming (ILP) and heuristic algorithms were presented to solve such a problem in WDM optical networks with or without wavelength continuity constraints.

Next Generation Optical Access Network Using CWDM Technology

We are developing a novel technology for the next generation optical access network. The proposed archi-tecture provides FTTX high bandwidth which enables to give out 10Gbit/s per end-user. Increasing the subscribers in the future will cause massive congestion in the data transferred along the optical network. Our solution is using the wavelength division multiplexing PON (CWDM-PON) technology to achieve high bandwidth and enormous data transmission at the network access. Physical layer modifications are used in our model to provide satisfactory solution for the bandwidth needs. Thus high data rates can be achieved throughout the network using low cost technologies. Framework estimations are evaluated to prove the intended model success and reliability. Our argument that: this modification will submit a wide bandwidth suitable for the future Internet.

Study on New Concatenated Code in WDM Optical Transmission Systems

A new concatenated code of RS(255,239)+BCH(2 040,1 930) code to be suitable for WDM optical transmission systems is proposed. The simulation results show that this new concatenated code, compared with the RS(255,239)+CSOC(k0/n0=6/7, J=8) code in ITU-T G.75.1, has a lower redundancy and better error-correction performance, furthermore, its net coding gain(NCG) is respectively 0.46 dB, 0.43 dB more than that of RS(255,239)+CSOC(k0/n0 =6/7, J=8) code and BCH(3 860,3 824)+BCH(2 040,1 930) code in ITU-T G.75.1 at the third iteration for the bit error rate(BER) of 10-12. Therefore, the new super forward error correction(Super-FEC) concatenated code can be better used in ultra long-haul, ultra large-capacity and ultra high-speed WDM optical communication systems.

Layer-Wise Topology Design for Cost Effective IP-Optical Networks

Traffic engineering and topology design considering multilayer configuration have become more important. While multilayer design studies usually discuss the traffic engineering issue or reliability, this paper focuses on network construction cost in studying multilayer topology design. The number of ports for the IP layer and the maximum number of Wavelength Division Multiplexers (WDM) for the optical layer are used as construction cost factors. Given a traffic matrix for the IP layer, 1) the number of ports is minimized to obtain a topology and a traffic matrix for the optical link, and 2) the maximum number of WDMs is minimized to configure the optical layer topology. It is shown that both the IP and Optical path layers have been given economic topologies. We present LP formulations of this scheme and the results of a simulation of the full-mesh traffic of 5 nodes, which shows that both layers are successfully optimized.

IP+Optical全光网络网管平台——UCP

本文简要分析了目前IP+Optical全光网络网管系统的基本组成、特点和发展趋势以及目前所面临的问题,并对Cisco公司IP+Optical统一控制网管平台———UCP分步实现策略进一步作了详细探讨。

IP+Optical:思科重新定义电信光网络

IP+Optical光技术既能为电信运营商实现智能网的IP服务。

思科强调IP+Optical策略

思科系统公司亚太区光网络事业部总监Idris T.Vasi说,“目前服务供应商面临的首要挑战是,如何以新的方式提供盈利的服务。

基于路径的整数线性规划方法在阻塞IP over WDM网络中能耗优化的应用

针对容量有限的透明IP over WDM网络模型,该文提出一种基于路径的整数线性规划(ILP)方法来优化网络的能耗。相对基于连接的整数线性规划方法,该方法可以在光层提供更多的路径选择组合。仿真结果显示,基于路径的整数线性规划方法能够通过选择更优的光路组合进一步降低网络的能耗。

IP智能与WDM技术的融合

讨论了在IP over WDM directly分层结构下,IP层网络与光层网络的三种基本融合方式—静态重叠模型、动态重叠模型和动态对等模型,这三种融合方式体现了IP over WDM directly的演变过程。同时还对各种融合方式中网络的组成结构及相应的控制平面技术作了详尽的阐述。

IP over WDM网络中可恢复的路由选择策略与算法

研究了IPoverWDM网络中各层备用资源的分配问题 ,提出了一种新的IPoverWDM网络中可恢复的路由选择策略以及应用于其中的备用路由选择算法 该策略通过层间备用资源共享 ,能够完全利用网络中为恢复光层故障所预留的资源来进行IP层故障恢复 ,从而大大提高了网络的资源利用率 对所提出的策略进行了性能分析 。

IP over WDM网络中一种新型虚拓扑构造算法

对IP over WDM的虚拓扑设计算法进行了研究,选择网络整体流量的均衡性作为优化目标,提出了一种新型的虚拓扑构造算法。在算法中,选择负载分布方差作为评价流量均衡性的指标,并给出其定义和计算方法。主要针对拥塞概率性能,在光层和IP层将提出的新型虚拓扑构造算法与其他算法进行比较。在光层的算法比较部分,选择负载均衡启发式路由算法(RLBH,routing with load balancing heuristics)与提出的算法进行比较;在IP层的算法比较部分,选择固定路径最小拥塞路由算法(FPLC,fixed-path least-congestion)与提出的算法进行比较,并对比较结果进行了讨论。比较结果显示在拥塞概率性能方面,提出的新型虚拓扑构造算法优于RLBH算法和FPLC算法。