Standardization of meibomian gland dysfunction in an Egyptian population sample using a non-contact meibography technique

AIM:To develop normative data for meibomian gland dysfunction(MGD)parameters,using non-contact meibography technique of Sirius Costruzione Strumenti Oftalmici(CSO)machine,in an Egyptian population sample.METHODS:Observational,cross-sectional,analytic study,in which 104 Egyptian volunteers were included.Both upper lids were examined,using“Sirius CSO”machine.Each eyelid was given a degree of meibomian gland loss(MGL),which was calculated by the software of the machine.RESULTS:Mean percentage MGL in right upper lid was of 30.9%±12.6%,and that of left upper lid was 32.6%±11.8%.Thirty-four volunteers(32.7%)had first-degree MGL in their right upper lid,and 67.3%had second-degree loss.One volunteer(1%)had zero-degree MGL in left upper lid,28(26.9%)had first-degree loss,and 75(72.1%)had second-degree loss.Degree of MGL in right upper eyelid was not related to age,but degree of MGL in left upper eyelid increased with age.There was statistically significant difference between both genders for degree of MGL in right eye(P=0.036)and in left eye(P=0.027).CONCLUSION:Noncontact meibography is a useful non-invasive tool for diagnosing MGL.MGL is diagnosed in 100%of apparently normal individuals;26.9%-32.7%of which have first-degree MGL,and 67.3%-72.1%have second-degree MGL.

PDE Standardization Analysis and Solution of TypicalMechanics Problems

A numerical approach is an effective means of solving boundary value problems(BVPs).This study focuses on physical problems with general partial differential equations(PDEs).It investigates the solution approach through the standard forms of the PDE module in COMSOL.Two typical mechanics problems are exemplified:The deflection of a thin plate,which can be addressed with the dedicated finite element module,and the stress of a pure bending beamthat cannot be tackled.The procedure for the two problems regarding the three standard forms required by the PDE module is detailed.The results were in good agreement with the literature,indicating that the PDE module provides a promising means to solve complex PDEs,especially for those a dedicated finite element module has yet to be developed.

Parallel session on marine standardization

The session on marine standardization was successfully held on May 22.Yu Xinli,President of China Association for Standardization(CAS),was invited to deliver a keynote speech.The highlight of her speech is presented as follows。

Workshop on driving inclusiveness in standardization

With the support of the Belgian FPS Economy,SBS and CEN-CENELEC are co-organizing the workshop,under the High-Level Forum on European standardization(HLF)and its workstream on inclusiveness in national standardization,to tackle issues of access and participation in standardization at the national level and discuss and promote best practices.

China and Sri Lanka sign a MoU on standardization

Witnessed by Chinese Premier Li Qiang and Sri Lanka Prime Minister Dinesh Gunawardena,Luo Wen,Minister of SAMR,and Anura Dissanayake,Secretary to the Prime Minster of Sri Lanka,signed a MoU on the standardization area on March 26.

International Standardization of Blockchain and Distributed Ledger Technology:Overlaps,Gaps and Challenges

As one of the most concerned digital technologies in recent years,blockchain and distributed ledger technology are an important driving force for a new round of technological development.It is currently in the process of accelerating its evolution and maturity,and has gradually integrated with other digital technologies.It has been applied in many industries,providing decentralized solutions for various industries,realizing innovative storage models,and building a new trust system.As blockchain technology is officially incorporated into China’s new information infrastructure category,the application fields of blockchain have expanded rapidly,gradually extending from the financial field and government affairs to other fields in the real economy.At the same time,with the continuous development of the globalized economy,blockchain technology will also have a profound impact on international technological and economic development.Therefore,for the healthy and orderly development and real implementation of the blockchain industry,standardize the application of blockchain,effectively break through the cognitive and technical barriers between different countries,industries and systems on a global scale,prevent application risks,the development of the global blockchain industry needs standardization basis,which is particularly important and urgent.A sound standard system is an important key to the successful development of technology,and formulating the right standard at the right time for technology development helps ensure the ease of use and interoperability of the technology.From the perspective of international standardization,this article first introduces the general situation of ISO,ITU-T,IEEE,W3C and other international standardization organizations,and sorts out the status quo of the blockchain standardization working groups of mainstream international standardization organizations.All blockchain-related standards under development have been analyzed for the characteristics of international blockchain technology standards and industry application standards.Through data analysis,the overlaps,differences and conflicts in the field of international blockchain standard formulation are sorted out,and suggestions for blockchain standardization work in the application and development of blockchain technology standardization by international organizations and industries are put forward.The plans and layouts of future international standards are summarized to help the development of the international standardization of blockchain.

Standardization of apple cancellation test for neglect patients in Korea:An observational study

BACKGROUND Neglect can be divided into two types using apple cancellation test(apple test):Egocentric neglect(EN)and allocentric neglect(AN).However,in South Korea,apple test results and decision criteria are still largely dependent on tests by foreign countries.AIM To establish a new South Korea standard and improve the accuracy of neglect assessment,the apple experiment was standardized in this study.METHODS This study was conducted on 223 healthy subjects for a total of 7 mo from August 2021 to February 2022.Standardization was carried out using the original apple test developed by Bickerton in 2011.In scoring for the apple test,total omission error refers to the number of missed targets(full apple)in the entire test sheet(left,middle,and right area).The score for EN is the difference between the correct number of right area and the correct number of left area(excluding the middle area).For AN,the score is difference between the number of left opening apples and number of right opening apples(including the middle area).Linear regression analysis was used for standardization using the general characteristics of subjects and the results of the apple test.RESULTS The cut-off score,which is the standard value indicating the pathological condition by combining the results of all subjects,is as follows:Total omission error(5),error for EN(2),and error for AN(2).Also,differences in cut-off score according to age were found.CONCLUSION This study will be helpful in facilitating a more accurate differential diagnosis of neglect.

CNIS and the Palace Museum work together for standardization of heritage conservation

The Palace Museum is not only a historic ancient building preserving cultural relics,but also one of the irreplaceable spiritual symbols of Chinese people.In order to implement the major deployments of the National Standardization Development Outline,and exert the basic and strategic role of standards in the protection of cultural relics,the Palace Museum and CNIS held a meeting on standardization work on August 28.

Cloud Computing Standardization:Fueling Digital Economy Industry Advancements

In recent years,China’s information technology sector has witnessed rapid growth.The development landscape of cloud security,storage,servers,and data centers,all linked to the cloud computing industry,has seen continuous expansion.The significance of cloud computing standardization in driving the development of the digital economy industry has grown notably.This article aims to present the fundamental concepts of cloud computing,provide an overview of its application in fostering the digital economy industry,analyze the current status and principal challenges in cloud computing standardization research,explore strategies for leveraging cloud computing standardization to empower the digital economy industry and offer a range of application scenarios.The goal is to summarize experiences and offer valuable reference material for relevant stakeholders.

Analysis of the Standardization of Administrative Management in Colleges and Universities Under the Background of Information Technology

In the development of the information age,universities should recognize the significant impact of information technology on their own development.In practice,it is possible to effectively improve the efficiency and quality of work by dealing with and constructing information-based methods,innovating administrative management models,and adopting more efficient and scientific methods to address various problems and shortcomings encountered in work.As an important part of university management,administrative management is a complex task.Establishing a standardized management model through information technology can further improve the comprehensive efficiency of administrative management.In this regard,the administrative standardization in universities under the background of information technology is analyzed and studied in this paper.

基于湍流模型的飞行器温度场数值仿真研究

飞行器红外成像仿真需要不同飞行条件下的温度场分布。本文利用标准(Standard)k-ε模型、剪切应力传输(SST)k-ε模型和Spalart-Allmaras(S-A)模型分别进行数值模拟仿真计算,研究不同飞行速度和飞行高度下的飞行器温度场分布,并对不同模型的结果进行对比分析。首先,利用MultiGen Creator软件对飞行器进行三维建模;其次采用Hypemesh软件和Fluent meshing软件中进行面网格划分和体网格划分,最后采用Fluent 2022R1软件仿真飞行器静态温度场分布,通过改变湍流模型与边界条件设置,对不同飞行速度和不同高度下飞行器温度场进行数值模拟仿真,并与理论结果进行了对比分析。实验结果显示,3种湍流模型均能较好的模拟飞行器蒙皮与尾喷管内壁壁面温度值。飞行器蒙皮温度随着飞行马赫数的增加不断升高;随着飞行高度的升高而不断地降低,与理论结果变化规律一致。在尾喷管内壁面温度仿真中,3种湍流模型仿真的内壁面温度最高相差21 K,相对误差在1.8%左右,在红外仿真中近似忽略不计,故3种湍流模型均适合尾喷管内壁面温度场仿真。在蒙皮温度场仿真中,3种湍流模型仿真计算的蒙皮平均温度值与理论温度值的相对误差均在5%以内,均可满足红外成像仿真的温度差值要求,其中k-ε模型在蒙皮温度场模拟中与理论温度值最为接近,因此k-ε模型精度更高,更适合于飞行器的流场仿真,能更好地仿真出空气动力加热对飞行器温度场的影响。

The impact of the Rural Minimum Living Standard Guarantee(Rural Dibao)Program on child nutrition outcomes

The Rural Minimum Living Standard Guarantee(Rural Dibao)is an important unconditional cash transfer program to alleviate poverty in rural China.Despite the importance of children’s nutrition in breaking poverty cycles,little is known about the impact of Rural Dibao on child nutrition outcomes.Using China Family Panel Studies(CFPS),this paper examines the effects of Rural Dibao on child nutrition outcomes and investigates potential pathways and heterogeneous effects.We exploit propensity score matching and difference-in-differences techniques to evaluate the effects of the Rural Dibao program on child nutrition outcomes.Our results suggest that Rural Dibao significantly impacts the nutrition outcomes of children up to 15 years of age.Specifically,our results suggest that Rural Dibao improves child height-to-age z-scores by 1.05 standard deviations and lowers the probability of stunting by 11.9 percentage points.Additional analyses suggest that increased protein intake is the main pathway through which Rural Dibao participation contributes to better nutrition outcomes.We also find that the effect of the program is more pronounced among girls,children who are non-left-behind or live with highly educated mothers,and those from low-income families and poor areas.Our findings suggest that Rural Dibao participation helps improve child nutrition outcomes through improving diet quality.

2021-2022年蒙古标准化发展分析:基于获批标准涉及领域的统计

Mongolia,a key partner in the Belt and Road Initiative,is fully dedicated to fostering regional cooperation and connectivity.Standardization has emerged as a vital field with far-reaching influence for regional trade cooperation.This paper makes an in-depth analysis of the standards approved in Mongolia in 2021 and 2022,offering a fresh perspective of the past two years’standardization development in the country.The primary objective is to present an updated account of Mongolia’s standardization efforts and to facilitate regional cooperation and exchange in standardization.

智慧城轨车地一体化机电系统标准体系构建研究

With the rapid development and application of emerging information technologies such as cloud computing,big data,artificial intelligence,5G,satellite communication,and blockchain in urban rail transit,China’s urban rail transit has entered an era of intelligent transformation and upgrading.The development of intelligent systems and the construction of smart urban rail transit have formed a consensus in the industry.The electromechanical system is an important component of urban rail transit engineering,covering power supply stations,vehicles,stations,and lines.The depot and control center are important support for promoting the development of urban rail transit towards informatization and intelligence.However,research on the technical standards for the smart urban rail vehicle-ground integrated electromechanical system has just begun,and a technical standards system has not yet been formed,which cannot better support the electromechanical system.Therefore,it is necessary to conduct research on the technical standards system,propose the common criteria structure and standards list of the standards system,which can provide reference and guidance for the planning and establishment of China’s smart urban rail standards system.

Standardized ileal digestibility of amino acids in soybean meal fed to non-pregnant and pregnant sows

Background Two studies were designed to determine standard ileal crude protein(CP)and amino acid(AA)digestibility of soybean meal(SBM)from different origins fed to non-pregnant and pregnant sows.Seven solvent-extracted SBMs from soybeans produced in the USA,Brazil,and China were selected.In Exp.1,eight different diets were created:a nitrogen(N)-free diet and 7 experimental diets containing SBM from different origins as the only N source.Eight non-pregnant,multiparous sows were arranged in an 8×8 Latin square design(8 periods and 8 diets).In Exp.2,the diet formula was the same as in Exp.1.Eight gestating sows(parity 3)were assigned to 4 different diets in a replicated 4×3 Youden square design(three periods and four diets)in mid-gestation and again in late-gestation stages.Results When fed to non-pregnant and late-gestating sows,the standardized ileal digestibility(SID)of CP and most AAs from different SBM were not significantly different(P>0.05).When fed to mid-gestating sows,the SID values for Arg,His,Lys,Phe,Cys,Gly,Ser,and Tyr in SBM 1 were lower than in SBM 4 and 5(P<0.05),whereas SID for Leu from SBM 5 was higher than in SBM 1 and 4(P<0.05).SID values for Ile,Ala,and Asp from SBM 4 were lower than in SBM 1 and 5(P<0.05).Sows had significantly greater SID values for Lys,Ala,and Asp during mid-gestation when compared with late-gestation stages(P<0.05).Mid-gestating sows had greater SID value for Val and lower SID value for Tyr when compared with non-pregnant and late-gestating sows(P<0.01),whereas non-pregnant sows had significantly greater SID value for Met when compared with gestating sows(P<0.01).Conclusions When fed to mid-gestating sows,the SID values for most AAs varied among SBM samples.The SID values for Lys,Met,Val,Ala,Asp,and Tyr in SBM were affected by sow gestation stages.Our findings provide a cornerstone for accurate SBM use in sow diets.

Development of a new cerebral ischemia reperfusion model of Mongolian gerbils and standardized evaluation system

Background:The Mongolian gerbil is an excellent laboratory animal for preparing the cerebral ischemia model due to its inherent deficiency in the circle of Willis.However,the low incidence and unpredictability of symptoms are caused by numerous complex variant types of the circle.Additionally,the lack of an evaluation system for the cer-ebral ischemia/reperfusion(I/R)model of gerbils has shackled the application of this model.Methods:We created a symptom-oriented principle and detailed neurobehavioral scoring criteria.At different time points of reperfusion,we analyzed the alteration in locomotion by rotarod test and grip force score,infarct volume by triphenyltetrazo-lium chloride(TTC)staining,neuron loss using Nissl staining,and histological charac-teristics using hematoxylin-eosin(H&E)straining.Results:With a successful model rate of 56%,32 of the 57 gerbils operated by our method harbored typical features of cerebral I/R injury,and the mortality rate in the male gerbils was significantly higher than that in the female gerbils.The suc-cessfully prepared I/R gerbils demonstrated a significant reduction in motility and grip strength at 1 day after reperfusion;formed obvious infarction;exhibited typi-cal pathological features,such as tissue edema,neuronal atrophy and death,and vacuolated structures;and were partially recovered with the extension of reperfu-sion time.Conclusion:This study developed a new method for the unilateral common carotid artery ligation I/R model of gerbil and established a standardized evaluation system for this model,which could provide a new cerebral I/R model of gerbils with more practical applications.

Quality assessment of the Topo-Iberia CGPS stations and data quality's effects on postfit ionosphere-free phase residuals

This paper analyzed GPS data from the Topo-Iberia network spanning almost 12 years(2008-2020).The data quality information for all 26 Topo-Iberia stations is provided for the first time,complementing the Spanish Geological Survey’s storage work.Data analyses based on quality indicators obtained using TEQC have been carried out.The guidelines and data quality information from the IGS stations have been considered as the quality references,with the stations ALJI,EPCU,and TIOU standing out as the worst stations,while on the contrary,FUEN,PALM,PILA,and TRIA meet the quality requirements to become an IGS station.The relationship between the GPS data quality and their GAMIT-and Gipsy X-derived postfit ionosphere-free phase residuals has also been investigated,and the results reveal an inversely proportional relationship.It has been found that the stations showing an increase in elevation of the horizon line,also show an increase in cycle slips and multipath,are among the poorest quality stations,and among those with the highest postfit RMS of phase residuals.Moreover,the evolution of the vegetation around the antenna should be considered as it could cause a progressive loss of quality,which is not complying with the IGS standards.The quality assessment shows that the Topo-Iberia stations are appropriate for geodetic purposes,but permanent monitoring would be necessary to avoid the least possible loss of data and quality.In addition,a method to characterize the GNSS data quality is proposed.

Effects of temperature and precipitation on drought trends in Xinjiang, China

The characteristics of drought in Xinjiang Uygur Autonomous Region(Xinjiang),China have changed due to changes in the spatiotemporal patterns of temperature and precipitation,however,the effects of temperature and precipitation—the two most important factors influencing drought—have not yet been thoroughly explored in this region.In this study,we first calculated the standard precipitation evapotranspiration index(SPEI)in Xinjiang from 1980 to 2020 based on the monthly precipitation and monthly average temperature.Then the spatiotemporal characteristics of temperature,precipitation,and drought in Xinjiang from 1980 to 2020 were analyzed using the Theil-Sen median trend analysis method and Mann-Kendall test.A series of SPEI-based scenario-setting experiments by combining the observed and detrended climatic factors were utilized to quantify the effects of individual climatic factor(i.e.,temperature and precipitation).The results revealed that both temperature and precipitation had experienced increasing trends at most meteorological stations in Xinjiang from 1980 to 2020,especially the spring temperature and winter precipitation.Due to the influence of temperature,trends of intensifying drought have been observed at spring,summer,autumn,and annual scales.In addition,the drought trends in southern Xinjiang were more notable than those in northern Xinjiang.From 1980 to 2020,temperature trends exacerbated drought trends,but precipitation trends alleviated drought trends in Xinjiang.Most meteorological stations in Xinjiang exhibited temperature-dominated drought trend except in winter;in winter,most stations exhibited precipitation-dominated wetting trend.The findings of this study highlight the importance of the impact of temperature on drought in Xinjiang and deepen the understanding of the factors influencing drought.

Characteristics of laser-induced breakdown spectroscopy of liquid slag

Rapid online analysis of liquid slag is essential for optimizing the quality and energy efficiency of steel production. To investigate the key factors that affect the online measurement of refined slag using laser-induced breakdown spectroscopy(LIBS), this study examined the effects of slag composition and temperature on the intensity and stability of the LIBS spectra. The experimental temperature was controlled at three levels: 1350℃, 1400℃, and 1450℃. The results showed that slag composition and temperature significantly affected the intensity and stability of the LIBS spectra. Increasing the Fe content and temperature in the slag reduces its viscosity, resulting in an enhanced intensity and stability of the LIBS spectra. Additionally, 42 refined slag samples were quantitatively analyzed for Fe, Si, Ca, Mg, Al, and Mn at 1350℃, 1400℃, and 1450℃.The normalized full spectrum combined with partial least squares(PLS) quantification modeling was used, using the Ca Ⅱ 317.91 nm spectral line as an internal standard. The results show that using the internal standard normalization method can significantly reduce the influence of spectral fluctuations. Meanwhile, a temperature of 1450℃ has been found to yield superior results compared to both 1350℃ and 1400℃, and it is advantageous to conduct a quantitative analysis of the slag when it is in a “water-like” state with low viscosity.

The Making of a Health Profession:How Chinese Medicine Became a Nationally Registered Allied Health Profession in Australia

In 2012, traditional Chinese medicine(TCM) practitioners in Australia became nationally-registered allied health professionals in three categories: acupuncturist, Chinese herbal medicine practitioner, and Chinese herbal medicine dispenser. Australia was the first Western country to introduce national registration for Chinese medicine, followed by Portugal and, recently, New Zealand. The practice of TCM in Australia can be traced back to the beginning of Chinese immigration to Australia during the Victorian Gold Rush which began in the 1850s. The process which led to national registration commenced in the early 1970s with the establishment of the first acupuncture courses. Decades of gradual development of courses from unaccredited part-time diplomas to accredited bachelor degrees, and the development, by the profession, of national consensus on educational standards were essential elements in the process which led to registration. Professional associations, such as the Australian Acupuncture and Chinese Medicine Association Ltd.(AACMA), also developed a framework of professional selfregulation, including Codes of Ethics, Codes of Conduct, ongoing professional development requirements and Infection Control Guidelines, and provided leadership in the development of the profession. After decades of tribalism and division within the TCM profession, the National Academic Standards Committee brought almost all stakeholders together to reach a consensus on the Australian Guidelines for Traditional Chinese Medicine Education which were published by AACMA in 2001. Professional associations also collaborated on joint submissions to the government in support of registration, which was introduced first in the state of Victoria in 2000, and subsequently became national in 2012. Despite national registration, some barriers still remain, and professional associations continue to lobby the federal government for inclusion in Medicare, chronic disease management scheme, and Veterans Affairs.