Comparison of performance between rescaled range analysis and rescaled variance analysis in detecting abrupt dynamic change

In the present paper, a comparison of the performance between moving cutting data-rescaled range analysis （MC- R/S） and moving cutting data-rescaled variance analysis （MC-V/S） is made. The results clearly indicate that the operating efficiency of the MC-R/S algorithm is higher than that of the MC-V/S algorithm. In our numerical test, the computer time consumed by MC-V/S is approximately 25 times that by MC-R/S for an identical window size in artificial data. Except for the difference in operating efficiency, there are no significant differences in performance between MC-R/S and MC-V/S for the abrupt dynamic change detection. Mc-R/s and MC-V/S both display some degree of anti-noise ability. However, it is important to consider the influences of strong noise on the detection results of MC-R/S and MC-V/S in practical application

Mold Wear During Die Forging Based on Variance Analysis and Prediction of Die Life

A process parameter optimization method for mold wear during die forging process is proposed and a mold life prediction method based on polynomial fitting is presented,by combining the variance analysis method in the orthogonal test with the finite element simulation test in the forging process.The process parameters with the greatest influence on the mold wear during the die forging process and the optimal solution of the process parameters to minimize the wear depth of the mold are derived.The hot die forging process is taken as an example,and a mold wear correction model for hot forging processes is derived based on the Archard wear model.Finite element simulation analysis of die wear process in hot die forging based on deform software is performed to study the relationship between the wear depth of the mold working surface and the die forging process parameters during hot forging process.The optimized process parameters suitable for hot forging are derived by orthogonal experimental design and analysis of variance.The average wear amount of the mold during the die forging process is derived by calculating the wear depth of a plurality of key nodes on the mold surface.Mold life for the entire production process is predicted based on average mold wear depth and polynomial fitting.

ONE-WAY MULTIVARIATE REPEATED MEASUREMENTS ANALYSIS OF VARIANCE MODEL

The one-way multivariate repeated measurements analysis of variance (1-way MRM ANOVA) model for complete data and the sphericity test are studied.

Did the Revision of the Japanese Medical Payment System Work Properly?—An Analysis of Averages and Variances of Length of Hospital Stay for Type 2 Diabetes Patients by Individual Hospital

We evaluated the effects of the 2010 revision of the medical payment system on the length of stay (LOS). In this analysis, we assessed not only the average length of stay (ALOS), but also variance of LOS at individual hospitals. We used a dataset of 18,641 type 2 diabetes patients collected from 51 general hospitals. The variables found to affect LOS were age, comorbidities, complications, acute hospitalization, introduced by other hospitals, winter, one-week hospitalization, specific hospitalization period, and principal diseases coded E11.5, E11.6 and E11.7. Although the effect was marginal, the 2010 revision did reduce ALOS, and the reduction was larger as ALOS became longer. On the other hand, we did not find that the variance of LOS within hospitals became smaller. The results of the study suggest that new incentives and assistance to hospitals to help them make efficient use of medical information are needed.

Analysis on Chinese Regional Differences in International Tourism Foreign Exchange Earnings with Method of One-way Variance Analysis

Based on data over 31 provinces and cities in China from2006 to 2013,this thesis first divides those 31 provinces and cities into four economic regions including northeastern region,central region,eastern region and western region.Based on data over 31 provinces and cities in China from 2006 to 2013,those 31 provinces and cities were devided into four economic regions in this thesis,including northeastern region,central region,eastern region and western region.Then,it takes international tourism foreign exchange earnings as the dependent variable,the four economic regions as the factor to measure the difference of international tourism foreign exchange earnings in different regions,and finds out the main reasons of it.Through the one-way variance analysis on international tourism foreign exchange earnings,we can know that international tourism foreign exchange earnings have differences in different regions apparently.Besides,significant differences can be found between northeastern and central regions as well as eastern and western regions,while it is not the same case between the central and western regions.

Authorized variance analysis with consumption rate

On the base of budget or plan information, comparing with actual results, making variance analysis, finding real reasons behind variance, this is important way of control and also important function of budget. However, without consideration of changes of environment, there are some limitations for static variance analysis with benchmark of plan data. Adjusting for benchmark according to actual condition, then doing variance analysis, these will improve utilization of variance analysis. Adjusted benchmark is often known as authorized cost/profit. For different understanding for authority concept, with RCA＇s （the abbreviation for Resource Consumption Accounting） view and numerical examples, this paper brings out the concept of consumption rate variance to promoting deeper understanding and analyzing reasons behind variance.

Using Contrasts in One-Way Analysis of Variance with Control Groups and an Application

In this study, it was shown that, same comparisons can be made by using contrast coefficients instead of Dunnett＇s test in the experiments with control groups. It was also shown that, in situations with an ordinal scale and equal spacing quantitative grouping, a trend investigation could be done by contrast coefficients. For this purpose, a small part of the data from a TUBITAK project in the Soil Science Department, Agriculture Faculty, Kahramanmaras Sutcu Imam University, was used with permission. The soils were absorbed to natural zeolite in concentration of 0, 2.5, 5 and 10 mg/kg, and after two years, the available Zinc （Zn） amounts in the soil were analyzed. As a result, in both Dunnett＇s test and contrast methods, the Zn amounts in control and 2.5 mg/kg concentration groups were found similar （P 〉 0.01）; but were different （P 〈 0.01） between control and 5 mg/kg concentration groups, and control and 10 mg/kg concentration groups. Furthermore, when orthogonal polynomial contrast coefficients were investigated, linear effects were found significant （P 〈 0.01） and cubic effects were obtained significant （P 〈 0.05）, but quadratic effect was obtained insignificant （P 〉 0.05）.

New Configurations of the Fuzzy Fractional Differential Boussinesq Model with Application in Ocean Engineering and Their Analysis in Statistical Theory

The fractional-order Boussinesq equations(FBSQe)are investigated in this work to see if they can effectively improve the situation where the shallow water equation cannot directly handle the dispersion wave.The fuzzy forms of analytical FBSQe solutions are first derived using the Adomian decomposition method.It also occurs on the sea floor as opposed to at the functionality.A set of dynamical partial differential equations(PDEs)in this article exemplify an unconfined aquifer flow implication.Thismethodology can accurately simulate climatological intrinsic waves,so the ripples are spread across a large demographic zone.The Aboodh transform merged with the mechanism of Adomian decomposition is implemented to obtain the fuzzified FBSQe in R,R^(n) and(2nth)-order involving generalized Hukuhara differentiability.According to the system parameter,we classify the qualitative features of the Aboodh transform in the fuzzified Caputo and Atangana-Baleanu-Caputo fractional derivative formulations,which are addressed in detail.The illustrations depict a comparison analysis between the both fractional operators under gH-differentiability,as well as the appropriate attributes for the fractional-order and unpredictability factorsσ∈[0,1].A statistical experiment is conducted between the findings of both fractional derivatives to prevent changing the hypothesis after the results are known.Based on the suggested analyses,hydrodynamic technicians,as irrigation or aquifer quality experts,may be capable of obtaining an appropriate storage intensity amount,including an unpredictability threshold.

An innovative classification system for ranking the biological effects of marine aromatic hydrocarbons based on fish embryotoxicity

Petroleum hydrocarbon pollution is a global concern,particularly in coastal environments.Polycyclic aromatic hydrocarbons(PAHs) are regarded as the most toxic components of petroleum hydrocarbons.In this study,the biomonitoring and ranking effects of petroleum hydrocarbons and PAHs on the marine fish model Oryzias melastigma embryos were determined in the Jiulong River Estuary(JRE) and its adjacent waters in China.The results showed that the levels of petroleum hydrocarbons from almost all sites met the primary standard for marine seawater quality,and the concentrations of the 16 priority PAHs in the surface seawater were lower compared with those in other coastal areas worldwide.A new fish expert system based on the embryotoxicity of O.melastigma(OME-FES) was developed and applied in the field to evaluate the biological effects of petroleum hydrocarbons and PAHs.The selected physiological index and molecular indicators in OME-FES were appropriate biomarkers for indicating the harmful effects of petroleum hydrocarbons and PAHs.The outcome of OME-FES revealed that the biological effect levels of the sampling sites ranged from level Ⅰ(no stress) to level Ⅲ(medium stress),which is further corroborated by the findings of nested analysis of variance(ANOVA) models.Our results suggest that the OME-FES is an effective tool for evaluating and ranking the biological effects of marine petroleum hydrocarbons and PAHs.This method may also be applied to evaluate other marine pollutants based on its framework.

Spatio-temporal variation and relationship between agricultural efficiency and irrigation intensity in a semi-arid region of India

A surging population in Karnataka State,a semi-arid region in India,poses a threat to both food security and livelihood sustainability,necessitating a concentrated effort to bolster agricultural efficiency and achieve United Naton’s Sustainable Development Goal 2(zero hunger).Therefore,in order to address the pressing issue of food scarcity in Karnataka,this study meticulously examined the spatio-temporal variation of agricultural efficiency and irrigation intensity in Karnataka,uncovering its significant dependence of agricultural efficiency on irrigation intensity.Specifically,this study used a one-way analysis of variance(ANOVA)to ascertain significant differences in the means of agricultural efficiency and irrigation intensity during 2004-2005 and 2018-2019.This study showed that the maximum improvement in agricultural efficiency index was recorded in Belgaum(40.24),Gulbarga(24.77),and Yadgir districts(22.92)between 2004-2005 and 2018-2019,which indicated the progressing trend and better scope for agriculture extension.On the contrary,some districts expressed threat(a decline of above 20.00 of agricultural efficiency index)and needed special care for the improvement of agricultural efficiency in four northern districts(Bagalkot,Bidar,Raichur,and Bijapur),three southern districts(Chitradurga,Chikballapur and Hassan),and two southern districts(Koppal and Gadag)in Karnataka.During 2004-2005,irrigation intensity varied from 3.19%to 56.39%,with the lowest irrigation intensity in Kodagu District and the highest irrigation intensity in Shimoga District.During 2018-2019,irrigation intensity changed from 0.77%to 72.77%,with the lowest irrigation intensity in Kodagu District and the highest in Dakshin Kannad District.Moreover,the research scrutinized the complex relationship between agricultural efficiency and irrigation intensity,with the correlation coefficient increased from 0.162 during 2004-2005 to 0.255 during 2018-2019.It implies that in both periods,a low positive correlation existed between these two variables.Over time,several factors(high-yield seeds and chemical fertilizers)other than irrigation intensity gradually became essential for agricultural efficiency.This research offers a wealth of valuable insights for regional planners and policy-makers contending with comparable challenges in various regions of India and other developing countries.

The Toxic Effects of Strong Chlorin Disinfectant on Mangroves and Emission Thresholds

In this study, based on the simulated discharge results of chemical disinfectants, hypocotyl germination concentration gradient pre-test and concentration gradient determination experiment were set up respectively. Laboratory cultivation was conducted to compare and analyze the root germination and germination indexes, three mangrove hypocotyls of Kandelia candel (Linn.) Druce, Ceriopstagal C.B. Rob. and Bruguiera sexangula var. Rhynchopetalas’ efficiency of cumulative root germination, cumulative germination and the cumulative expansion of the second pair of leaves, one-way analysis of variance was used to obtain the tolerance threshold of three mangrove hypocotyls to strong chlorin disinfectant. The study determined that the by-products of strong chlorin disinfectant, the toxic threshold concentrations of Kandelia candel (Linn.) Druce, Ceriopstagal C.B. Rob. and Bruguiera sexangula var. rhynchopetala are close to 0.55 mg/L, 0.55 mg/L and 0.25 mg/L, respectively. This concentration range is lower than the average concentration of 1.183 mg/L of active chlorine emitted from strong chlorine concentrate during pond clearing in high-level shrimp ponds, indicating that transient emissions of strong chlorine concentrate during pond clearing can have a toxic effect on mangrove plants. The strength of tolerance of the embryonic axes of the three mangrove species to effective chlorine contamination was, Ceriopstagal C.B. Rob. stronger than Bruguiera sexangula var. rhynchopetala, and Kandelia candel (Linn.) Druce is the weakest.

Detailed Statistic Analysis Method of Split-split Plot Design in Agricultural Research

Based on a practical research test, the statistic analysis method for the experimental data in the split-split plot design was introduced in detail, especially in- troduced the significant test method of three-factor interaction and the calculation of test value, which solved the problem of how to make statistical analysis on the data in split-split plot design.

Analysis of Heat Transfer Performance of Oscillating Heat Pipes Based on a Central Composite Design

Oscillating heat pipes (OHPs) are very promising cooling devices. Their heat transfer performance is af- fected by many factors, and the form of the relationship between the performance and the factors is complex and non-linear. In this paper, the effects of charging ratio, inclination angle, and heat input and their interaction effects on heat transfer performance of a looped copper-water OHP are analyzed. First, suppose that the relationship between the response and the variables approximates a second-order model. And use the central composite design to arrange the ex- periment. Then, the method of least squares is used to estimate the parameters in the second-order model. Finally, multi- variate variance analysis is used to analyze the model. The results show that the assumption is right, that is to say, the re- lationship is well modeled by a second-order function. Among the three main effect variables, the effect of inclination angle is the most significant, but their interaction effects are not significant. In the range of the considered factors, both the optimum charging ratio and the optimum inclination angle increase as the heating water flow rate increases.

Analysis of Wind Power Assessment Based on the WRF Model

Assessing wind energy is a key step in selecting a site for a wind farm. The accuracy of the assessment is essential for the future operation of the wind farm. There are two main methods for assessing wind power: one is based on observational data and the other relies on mesoscale numerical weather prediction(NWP). In this study, the wind power of the Liaoning coastal wind farm was evaluated using observations from an anemometer tower and simulations by the Weather Research and Forecasting(WRF) model, to see whether the WRF model can produce a valid assessment of the wind power and whether the downscaling process can provide a better evaluation. The paper presents long-term wind data analysis in terms of annual, seasonal, and diurnal variations at the wind farm, which is located on the east coast of Liaoning Province. The results showed that, in spring and summer, the wind speed, wind direction, wind power density, and other main indicators were consistent between the two methods. However, the values of these parameters from the WRF model were significantly higher than the observations from the anemometer tower. Therefore, the causes of the differences between the two methods were further analyzed. There was much more deviation in the original material, National Centers for Environmental Prediction(NCEP) final(FNL) Operational Global Analysis data, in autumn and winter than in spring and summer. As the region is vulnerable to cold-air outbreaks and windy weather in autumn and winter, and the model usually forecasted stronger high or low systems with a longer duration, the predicted wind speed from the WRF model was too large.

AFLP and MSAP Analysis of ‘Lane Late’ Navel Orange and Its Bud Sport Pumpkin-like Navel Orange

[Objectives]The paper was to analyze the differences of genes and genome methylation between‘lane late’navel orange and it’s bud sport pumpkin-like navel orange,and to reveal the causes of bud sport.[Methods]Amplification fragment length polymorphism(AFLP)and methylation sensitive amplification polymorphism(MSAP)were used to analyze the differences in genes and genome methylation of‘lane late’navel orange and its bud sport pumpkin-like navel orange.[Results]Gene mutation occurred between the‘lane late’navel orange and its bud sport pumpkin-like navel orange.A total of 15 differential bands were obtained by AFLP markers,and the percentage of polymorphic bands was 6.0000%.Meantime,10 differential bands were obtained by MSAP markers,and the percentage of polymorphic bands was 5.4645%.The semimethylation rate and permethylation rate of‘lane late’navel orange were higher than that of pumpkin-like navel orange,that is,pumpkin-like navel orange had demethylation(demethylation ratio was 1.6393%).[Conclusions]It is proved at the DNA level that the emergence of bud sport pumpkin-like navel orange is due to gene mutation,and the DNA methylation level of the bud sport material has also changed.This study lays a foundation for further exploring the mechanism of bud sport.

Optimizing SUS 304 wire drawing process by grey relational analysis utilizing Taguchi method

In the stainless steel 304 （SUS 304） wire drawing process, optimizing the die life and wire tensile strength, which are the larger-the-better quality characteristics （QCH） types, is of main interest. Three control factors, involving reduction ratio, lubricant temperature, and drawing speed, were investigated utilizing L9（34） orthogonal array （OA）. The grey relational analysis was conducted for the normalized signal-to-noise （S/N） ratios. The ordinal value of the grey grade was then used to decide optimal factor levels. The anticipated improvements in die life and wire tensile strength were estimated 25.31 h and 22.50 kg/mm2, respectively. To decide the significant factor which had effect on each QCH and predict the average value of each QCH, analysis of variance （ANOVA） was performed for S/N ratio and QCH. Confirmation experiments were then conducted, where a good overlap was noticed between the predicted and confirnation intervals for each QCH. The Hotelling T2 and the sample generalized variance control charts were finally utilized in controlling and monitoring future production. In conclusion, the grey relational analysis utilizing Taguchi method is an effective approach for optimizing the die life and wire tensile strength for SUS wire drawing process. 2008 University of Science and Technology Beijing. All rights reserved.

Property analysis of bistatic forward-looking SAR with arbitrary geometry

Bistatic forward-looking synthetic aperture radar（SAR） has many advantages and applications owing to its twodimensional imaging capability.There could be various imaging configurations because of the geometric flexibility of bistatic platforms,resulting in kinds of models built independently among which there could be some similar even the same motion features.Comprehensive research on such systems in a more comprehensive and general point of view is required to address their difference and consistency.Property analysis of bistatic forwardlooking SAR with arbitrary geometry is achieved including stripmap and spotlight modes on airborne platform,missile-borne platform,and hybrid platform of both.Emphasis is placed on azimuth space variance of some key parameters significantly affecting the subsequent imaging processing,based on which the frequency spectra are further described and compared considering respective features of different platforms for frequency imaging algorithm developing.Simulation results confirm the effectiveness and correctness of our analysis.

Physicochemical Properties of Banana Flour as Influenced by Variety and Stage of Ripeness： Multivariate Statistical Analysis

Physicochemical properties of banana flour （BF） were studied in two varieties （Cavendish and Dream） and two stages of ripeness （green and ripe）. BF＇s were analyzed for pH, total soluble solids （TSS）, water holding capacity （WHC） and oil holding capacity （OHC） at 40℃, 60 ℃ and 80 ℃, color values L＊, a＊ and b＊, back extrusion force and viscosity. Physicochemical data were analyzed by Multivariate Analysis of Variance, discriminant analysis and cluster analysis. All statistical analyses showed that physicochemical properties of BF prepared from different variety and stage of ripeness were different from each other. Viscosity, WHC40, WHC60 and TSS were recommended methods for discrimination between banana flour prepared from the two varieties, whilst viscosity, WHC60 and WHC80 were suggested for differentiation of banana flour prepared using green and ripe banana.

Optimization of tribological parameters over WC-12%Co laser alloyedpearlitic ductile iron using Taguchi based Grey relational analysis

Pearlitic ductile irons(PDIs)are used in transportation and nuclear energy industries.In heavy loading situation,the service life of PDI is affected by numerous tribo aspects.In this study,surface of the PDI is alloyed with WC-12%Co powder using a high power fibre laser.The wear properties of the base material and laser alloying samples were investigated by tribometer with various parameters,i.e.,temperature,load and sliding speed.Based on experimental test,the load has maximum percentage of contribution and followed by sliding speed and working temperature.The optimized tribological parameters by Grey relational analysis(GRA)were established and those values are closely matched with predicted values.Besides,base material and laser alloying surfaces were examined through Vickers hardness machine,scanning electron microscopy(SEM)and roughness tester.The laser altered specimen shows no defects and improves the wear properties than substrates.The identified optimal tribological parameters are load of 30 N,speed of 0.5 m/s and working temperature of 300℃,and load of 30 N,speed of 0.5 m/s and working temperature of 200℃ for base metal and laser alloying samples,respectively.

Analysis of Key Attributes Influencing the User Satisfaction towards Applications

This research aims to find out the key attributes influencing the user trust towards applications on the mobile application store. In this research, both the experimental data set and the evaluation results of analysis are described. The analysis results include the test results of analysis of variance （ANOVA） and correlation analysis. In ANOVA, the attributes affecting user rating are derived and applied to the correlation analysis to evaluate the degree of correlation towards user rating, and in the last stage the positive or negative relationship with user satisfaction is figured out.