Study on Wave Dissipation of the Structure Combined by Baffle and Submerged Breakwater

This paper proposes a structure combined by baffle and submerged breakwater （abbreviated to SCBSB in the following texts）. Such a combined structure is conducive to the water exchange in the harbor, and has strong capability on wave dissipation. Our paper focuses on the discussion of two typical structures, i.e., the submerged baffle and rectangular breakwater combined with the upper baffle respectively, which are named as SCBSB 1 and SCBSB2 for short. The eigenfunction method corrected by experimental results is used to investigate the wave dissipation characteristics. It shows that the calculated results agree well with the experimental data and the minimum value of the wave transmission coefficient can be obtained when the distance between the front and rear structures is from 1/4 to 1/2 of the incident wave length.

Characteristics of viscous debris flow in a drainage channel with an energy dissipation structure

A new type of drainage channel with an energy dissipation structure has been proposed based on previous engineering experiences and practical requirements for hazard mitigation in earthquakeaffected areas.Experimental studies were performed to determine the characteristics of viscous debris flow in a drainage channel of this type with a slope of 15%.The velocity and depth of the viscous debris flow were measured,processed,and subsequently used to characterize the viscous debris flow in the drainage channel.Observations of this experiment showed that the surface of the viscous debris flow in a smooth drainage channel was smoother than that of a similar debris flow passing through the energy dissipation section in a channel of the new type studied here.However,the flow patterns in the two types of channels were similar at other points.These experimental results show that the depth of the viscous debris flow downstream of the energy dissipation structure increased gradually with the length of the energy dissipation structure.In addition,in the smooth channel,the viscous debris-flow velocity downstream of the energy dissipation structure decreased gradually with the length of the energy dissipation structure.Furthermore,theviscous debris-flow depth and velocity were slightly affected by variations in the width of the energy dissipation structure when the channel slope was 15%.Finally,the energy dissipation ratio increased gradually as the length and width of the energy dissipation structure increased;the maximum energy dissipation ratio observed was 62.9%(where B = 0.6m and L/w = 6.0).

Discussion of Dissipation Structure in a Directionally Solidified Alloy

The dissipation theory was introduced into the solidification area to describe the inherent laws of solidification from a new viewpoint. Discussion demonstrates that the solid / liquid interface in a directionally solidified alloy belongs to a kind of dissipation structure

Hydraulic Design Method of Wave Dissipating Structure with Partially Perforated Front Wall

Based on the matching conditions of different fluid regions, the eigenfunction expansion method is used to develop a theoretical formula for wave reflection in front of the perforated structure with a partially slit front wall. The accuracy of the solution is verified by comparing the numerical results with experimental data. In addition, a new hydraulic design method is developed by derivation of the theoretical formula with respect to the porosity of the slit wall, and the results of this design method is drafted for harbour engineers to use.

Nonequilibrium Thermodynamic and Dissipative Structure Mechanism of Fluidized Beds

Fluidized beds are nonlinear dynamic systems that exchange mass and energy with outside. They are governed not only byfluid dynamics, but by thermodynamics, especially the second law of thermodynamics as well. According to Prigogine's dissipative structure theory, the following have been concluded: (l) a fixed bed is on thermodynamic blanch, and bubbling, turbulent and fast beds areon the dissipatve structure branches. (2) Entropy in fluidized beds is divided into tWo parts: entropy production and entropy flux. The latter increases with gas velocity and decreases with pressure of the systems. That means the entropy of a system may reduce and the systemwith higher gas velocity behaves as dissipative structure characteristics. (3) For a giVen velocity, a fluidized bed operates stably on thewhole, but it is unstable to local gas-solid phases. The unstable phases are described by fluid dynamic equations, While the minimum ofsystem energy function assures whole stability of the system. (4) A transition criterion of a bubbling bed is derived from Prigogine's stability theory.

Engineering practice of seismic isolation and energy dissipation structures in China

The concepts of seismic isolation and energy dissipation structures emerged in the early 1970s.In China,the first seismic isolation structure was finished in 1993,and the first energy dissipation structure was built at about the same time.Up to 2007,China had more than 600 seismic isolation and about 100 energy dissipation building structures.In 2008,the huge Wenchuan earthquake hit the southwest of China,which triggered a bloom of new seismic isolation and energy dissipation structures.This paper presents the development history and representative applications of seismic isolation and energy dissipation structures in China,reviews the state-of-the-practice of Chinese design,and discusses the challenges in the future applications.Major findings are as follows:Basic design procedures are becoming standardized after more than ten years of experiences,which mainly involve determination of design earthquake forces,selection of ground motions,modeling and time-history analyses,and performance criteria.Nonlinear time-history analyses using multiple ground motions are the characteristic of the design of seismic isolation and energy dissipation structures.Regulations,standardization and quality control of devices,balance between performance and cost,comparison with real responses,and regular inspection are identified as the issues that should be improved to further promote the application of seismic isolation and energy dissipation structures in China.

A spatially triggered dissipative resource distribution policy for SMT processors

Programs take on changing behavior at nmtime in a simultaneous multithreading （SMT） environment. How reasonably common resources are distributed among the threads significantly determines the throughput and fairness performance in SMT processors. Existing resource distribution methods either mainly rely on the front-end fetch policy, or make distribution decisions according to the limited information from the pipeline. It is difficult for them to efficiently catch the various resource requirements of the threads. This work presents a spatially triggered dissipative resource distribution （SDRD） policy for SMT processors, its two parts, the self-organization mechanism that is driven by the real-time instructions per cycle （IPC） performance and the introduction of chaos that tries to control the diversity Of trial resource distributions, work together to supply sustaining resource distribution optimization for changing program behavior. Simulation results show that SDRD with fine-grained diversity controlling is more effective than that with a coarse-grained one. And SDRD benefits much from its two well-coordinated parts, providing potential fairness gains as well as good throughput gains. Meanings and settings of important SDRD parameters are also discussed.

基于耗散结构理论的公立医院组织韧性形成机制研究

借助耗散结构理论探寻公立医院组织韧性的形成机制和培育策略。首先分析耗散结构理论与公立医院组织韧性的关联性;其次从识别危机信号、适应危机变化、实现危机中反弹3个阶段分析公立医院组织韧性的形成路径,聚焦于检测性激活、适应性重构、反思性转化3项动态循环的行为,并结合耗散结构理论中熵变调节、自组织机制、涨落反馈等核心思想,提取组织韧性形成的6个关键要素,即预防正熵、增加负熵、制度适时调整、资源调配使用、反思学习、组织优化,并对每个关键要素对应的行为表现进行阐述;再者提出公立医院组织韧性的培育策略,包括培育公立医院物理韧性、制度韧性、人员技术韧性、心理韧性等,以期实现公立医院由脆弱性向韧性转变。

Dissipative structure for symmetric hyperbolic systems with memory

We study symmetric hyperbolic systems with memory-type dissipation and investigate their dissipative structures.We treat two cases:memory-type diffusion and memory-type relaxation,and observe that the dissipative structures of these two cases are essentially different.Namely,we show that the dissipative structure of the system with memory-type diffusion is of the standard type,while that of the system with memory-type relaxation is of the regularity-loss type.

THE EFFECT OF THE NEGATIVE ENTROPY FLOW ON THE ORGANIZATION OF ATMOSPHERIC DISSIPATIVE STRUCTURES IN NON-EQUILIBRIUM CONDITIONS

The entropy balance equation that describes the entropy budget of atmospheric systems is derived from the Gibbs relation.The distribution of the entropy flows of a west-Pacific typhoon and a Bengal-Bay cyclone is calculated and thus the dissipativity of the atmospheric systems is revealed.

ATHEROSCLEROSIS AND DISSIPATIVE STRUCTURES

The theory of dissipative structure is applied to the study of atherosolerosis. An auto-catolytic theoretical model is suggested. The behaviors of the model are in agreement with thefacts of experimental atherosclerosis. We predict the high effectiveness of combinativetherapy for atherosclerosis with drugs affecting protein metabolism and lipid metabolism. Itwas verified by animal experimentation. Further possible developments are briefly discussed. This work is the theoretical foundation of the Multi-Risk Factor Intervention Trial(MRFIT) which is popularized clinically in its beginning all over the world.

Symplectic(辛)几何学与航空发动机的结构设计

Ｓｙｍｐｌｅｃｔｉｃ（辛）几何学与航空发动机的结构设计西北工业大学教授邓子辰计算结构力学与最优控制模拟理论的建立，说明这两门学科之间存在相似性。近几年的工作主要是将结构力学中的一些有效方法（如多重子结构法、能量法等）成功地引入了最优控制领域，并已取...

NONLINEAR EVOLUTION SYSTEMS AND GREEN’S FUNCTION

In this paper, we will introduce how to apply Green＇s function method to get the pointwise estimates for the solutions of Cauchy problem of nonlinear evolution equations with dissipative structure. First of all, we introduce the pointwise estimates of the time-asymptotic shape of the solutions of the isentropic Navier-Stokes equations and show to exhibit the generalized Huygen＇s principle. Then, for other nonlinear dissipative evolution equations, we will only introduce the result and give some brief explanations. Our approach is based on the detailed analysis of the Green＇s function of the linearized system and micro-local analysis, such as frequency decomposition and so on.

Antitumor effects of electrochemical treatment

Electrochemical treatment is an alternative modality for tumor treatment based on the application of a low intensity direct electric current to the tumor tissue through two or more platinum electrodes placed within the tumor zone or in the surrounding areas. This treatment is noted for its great effectiveness, minimal invasiveness and local effect. Several studies have been conducted worldwide to evaluate the anfitumoral effect of this therapy. In all these studies a variety of biochemical and physiological responses of tumors to the applied treatment have been obtained. By this reason, researchers have suggested various mechanisms to explain how direct electric current destroys tumor ceils. Although, it is generally accepted this treatment induces electrolysis, electroosmosis and electroporation in tumoral tissues. However, action mechanism of this alternative modality on the tumor tissue is not well understood. Although the principle of Electrochemical treatment is simple, a standardized method is not yet available. The mechanism by which Electrochemical treatment affects tumor growth and survival may represent more complex process. The present work analyzes the latest and most important research done on the electrochemical treatment of tumors. We conclude with our point of view about the destruction mechanism features of this alternative therapy. Also, we suggest some mechanisms and strategies from the thermodynamic point of view for this therapy. In the area of Electrochemical treatment of cancer this tool has been exploited very little and much work remains to be done. Electrochemical treatment constitutes a good therapeutic option for patients that have failed the conventional oncology methods.

NON-EQUILIBRIUM STATIONARY STATE IN CHEMICAL REACTION OF SiO_2/Fe AT INTERFACE OF SLAG/METAL AND ITS STABILITY DURING ARC WELDING

For characteristics of open and far from thermodynamic equilibrium in welding chemical reaction, a new kind of quantitative method, which is used to analyze direction and extent for chemical reaction of SiO2/Fe during quasi-steady state period, is introduced with the concept of non-equilibrium stationary state. The main idea is based on thermodynamic driving forces, which result in non-zero thermodynamic fluxes and lead to chemical reaction far away from thermodynamic equilibrium. There exists certain dynamic equilibrium relationship between rates of diffusion fluxes in liquid phase of reactants or products and the rate equation of chemical reaction when welding is in quasi-steady state. As result of this, a group of non-linear equations containing concentrations of all substances at interface of slag/liquid-metal may be established. Moreover the stability of this non-equilibrium stationary state is discussed using dissipative structure theory and it is concluded theoretically that this non-equilibrium stationary state for welding chemical reaction is of stability.

Spatial relationship between energy dissipation and vortex tubes in channel flow

The spatial relationship between the energy dissipation slabs and the vortex tubes is investigated based on the direct numerical simulation（DNS） of the channel flow. The spatial distance between these two structures is found to be slightly greater than the vortex radius. Comparison of the core areas of the vortex tubes and the dissipation slabs gives a mean ratio of 0.16 for the mean swirling strength and that of 2.89 for the mean dissipation rate. These results verify that in the channel flow the slabs of intense dissipation and the vortex tubes do not coincide in space. Rather they appear in pairs offset with a mean separation of approximately 10η.

Delaminated layered double hydroxide delivers DNA molecules as sandwich nanostructure into cells via a non-endocytic pathway

Layered double hydroxides （LDHs） are effective molecular carriers in cytological research, gene therapy, and transgenic applications. Herein, we investigated the internalization behavior of the LDH-DNA biocon- jugates via a microscopic approach and analyzed the internalization pathway by dissipative particle dynamics （DPD） simulations. We experimentally found that LDH can efficiently carry DNA into the nucleus of cell in BY-2 suspension cells. Furthermore, atomic force microscopy and X-ray diffraction anal- ysis demonstrated that the LDH-DNA bioconjugates mainly exist as a DNA-LDH-DNA sandwich complex, while the LDH-DNA-LDH sandwich complex and DNA-LDH complex cannot be excluded. The DPD simu- lations further indicated that only the DNA-LDH-DNA sandwich structure could penetrate the plasma membrane （PM）, while PM is impermeable to the LDH-DNA-LDH sandwich complex and the DNA-LDH complex. This work provides novel perspective for understanding the membrane penetration mechanism of LDH nano-sheets and new insights into the design of novel molecular delivery systems.

Role of Convection Flow on the Pattern Formation in the Drying Process of Colloidal Suspension

We study the macroscopic drying patterns of aqueous suspensions of colloidal silica spheres. It was found that convection strength can influence pattern formation. Uniformed films are obtained at weaker convection strength. In addition, we make clear that it is not reasonable to discuss individually the effect of temperature and humidity on the colloid self-assembly. The physical mechanism is that these factors have relationship with the evaporation rate, which can affect the convection strength.

Dynamic Mechanism of Migmatization in the Dabie Complex, Northeastern Hubei, China

On the basis of the detailed field work, compositions and contents of plagioclase and K - feldspar,determination of ordering degree, statistical analysis of plagioclase elongation index, mass-balance calculation and mineral spatial distribution and geochemistry, it is concluded that the migmatites in the Dabie complex are characterized by the presence of thermocenters. There are regular changes in mineral character in the migmatites from the centers outwards. The dominant genetic mechanism is anatexis and metasomatism, whose intensities decrease from the centers outwards. Finally, according to the simulated experiment on Liesegang' s rings and non-linear dynamics (dissipative structure theory), the dynamic mechanism of migmatization is profoundly expouded as consisting of the early-stage metasomatism induced by the thermal anomaly, the cardinal-stage anatexis induced by the early-stage matasomatism and finally the last-stage post-anatexis metasomatism.

Analysis of Venezuela's oil-oriented economy: from the perspective of entropy

To investigate the efficiency and stability of Venezuela＇s oil-oriented economy, this paper applied entropy to the analysis.Based on this method, Venezuela＇s oil-centered industry, inefficient regulatory system, and insensitive response to external changes are recognized as an increase in the country＇s entropy. According to these facts, a dissipative structure model is constructed to analyze the efficiency and stability of the Venezuela＇s economic system. The results show that financial assistants（fund flow）, policy reform（policy flow）, and advanced technology（technology flow） can perform as negative entropy inflows（NEIFs）. These NEIFs will promote a series of influence and feedback reactions, which will contribute to recovering Venezuela＇s system efficiency and stability.