A novel optical beam splitter based on photonic crystal with hybrid lattices

A novel optical beam splitter constructed on the basis of photonic crystal（PC） with hybrid lattices is proposed in this paper.The band gap of square-lattice PC is so designed that the incident light is divided into several branch beams.Triangular-lattice graded-index PCs are combined for focusing each branch.Computational calculations are carried out on the basis of finite-different time-domain algorithm to prove the feasibility of our design.The waveguide is unnecessary in the design.Thus the device has functions of both splitting and focusing beams.Size of the divided beam at site of full-width at half-maximum is of the order of λ/2.The designed splitter has the advantages that it has a small volume and can be integrated by conventional semiconductor manufacturing process

Influence of laser mode on splitting beam illumination effect of Dammann grating

The influences of various laser modes on the splitting beam effect of Dammann grating are studied in theory and by numerical simulation. The results show that fundamental mode laser resembles plane wave while high order mode laser differs from plane wave in the splitting beam effect by Dammann grating. Therefore, the fundamental mode laser is more suitable to be the light source to improve the energy efficiency in far-distance image detecting systems, such as laser image ladar, which use Dammann grating in the ilhlmination svstem.

Generation of three-mode W-type entangled coherent states in free-travelling optical fields

We propose a scheme for generation of three-mode W-type entangled coherent states （ECSs） in freetravelling optical fields by using a single-photon source, coherent state sources, beam splitters, photodetectors, and three-mode cross-Kerr media. The scheme consists of a Mach-Zehnder interferometer （MZI） in which each arm contains a cross-Kerr medium. We calculate the success probability of the generated W-type ECSs, and the total success probability is unity under the ideal conditions.

Polarization-independent wavelength conversion using a single semiconductor optical amplifier

Polarization-independent wavelength conversion is demonstrated by using four-wave mixing （FWM） in a single semiconductor optical amplifier （SOA）. In this scheme, all the incident fields are split into two orthogonal-polarized parts by polarizing beam splitters （PBS）. Each of the two parts is then transmitted into one facet of the SOA and they are counter-propagating through the same amplifier. Wavelength conversion with the polarization sensitivity less than 1.3 dB is obtained over a range from 1510 to 1620 nm.

Measurement of absolute phase shift on reflection of thin films using white-light spectral interferometry

A novel method to measure the absolute phase shift on reflection of thin film is presented utilizing a white-light interferometer in spectral domain. By applying Fourier transformation to the recorded spectral interference signal, we retrieve the spectral phase function Ф, which is induced by three parts： the path length difference in air L, the effective thickness of slightly dispersive cube beam splitter Teff and the nonlinear phase function due to multi-reflection of the thin film structure. We utilize the fact that the overall optical path difference （OPD） is linearly dependent on the refractive index of the beam splitter to determine both L and Teff. The spectral phase shift on reflection of thin film structure can be obtained by subtracting these two parts from Ф. We show theoretically and experimentally that our new method can provide a simple and fast solution in calculating the absolute spectral phase function of optical thin films, while still maintaining high accuracy.

Analysis and simulation of XPM intensity modulation

Based on the split-step Fourier method and small signal analysis, an improved analytical solution which describes the cross-phase modulation (XPM) intensity is derived. It can suppress the spurious XPM intensity modulation efficiently in the whole transmission fiber. Thus it is more coincidence with the practical result. Furthermore, it is convenient, because it is independent of channel separation and the dispersion and nonlinear effects interact through the XPM intensity. A criterion of select the step size is described as the derived XPM intensity modulation being taken into account. It is non-uniform distribution and is the function of average signal power <P(z)> (or z). Compared with the conventional split-step method, the simulation accuracy is improved when the step size is determined by the improved XPM intensity.

Properties of cat mutually pumped phase conjugation and two-wave mixing gain in doped KNSBN

Cat mutually pumped phase conjugation configuration is discovered and investigated by using two-wave mixing in (KyNa1-y)2z(SrxBa1-x)1-zNb2O6 (KNSBN) crystal. When only one signal or pumped beam does not give birth to phase conjugation, the maximum reflectivity of signal and pumped beam attain 140% and 30% due to two-wave mixing, respectively. The experimental results show that the two-wave mixing can reduce the threshold of incident beams power, extend the incident angle range, and shorten response rate in the process of self-pumped phase conjugator (SPPC) in KNSBN crystal.