微构造识别技术在×油田的应用

×油田微构造广泛发育,对微构造的认识精度在一定程度上影响着该油田的开发水平。该油田为复杂断块油藏,断层多期发育,精细刻画微构造的难度较大。为解决上述问题,通过研究形成了以精细地震构造解释为基础、以井控变速构造成图为关键的微构造精细表征技术。研究成果提高了对该油田微构造的认识和刻画精度,促进该油田取得良好的生产效果,提高了该油田的产量。

Quantitative Description of the Effects of Sweep Efficiency and Displacement Efficiency during Chemical Flooding on a Heterogeneous Reservoir

The processes of flooding—water flooding, polymer flooding and ternary combination flooding—were simulated respectively on a 2-D positive rhythm profile geological model by using the ASP numerical modeling software developed by RIPED (Yuan, et al. 1995). The recovery coefficient, remaining oil saturation, sweep efficiency and displacement efficiency were calculated and correlated layer by layer. The results show that the sweep efficiency and displacement efficiency work different effects on different layers in the severely heterogeneous reservoir. The study shows that the displacement efficiency and sweep efficiency play different roles in different layers for severely heterogeneous reservoirs. The displacement efficiency contributes mainly to the high permeability zones, the sweep efficiency to the low permeability zones, both of which contribute to the middle permeable zones. To improve the sweep efficiency in the low permeability zones is of significance for enhancing the whole recovery of the reservoir. It is an important path for improving the effectiveness of chemical flooding in the severely heterogeneous reservoirs to inject ternary combination slug after profile control.

Application of Comprehensive Geophysical Techniques to Predict Carbonate Fractured Reservoirs inQingxi Oilfield

Inter-crystalline pores, cavities, and fractures created from diagenetic shrinkage of dolomite are inter-connected each other, forming fine oil- and gas-bearing reservoirs. It is hard to predict these complex fracture-cavity reservoirs because of their random distribution, different growth timing, and so on. Taking the lacustrine dolomite fracture-pore reservoir in the Lower Cretaceous Xiagou Formation in the Qingxi oilfield within the Jiuquan basin as an example, we put forward a comprehensive geophysical method to predict carbonate fractures.

三维石油遥感应用中多时相影像数据管理

针对目前多时相影像数据管理主要是面向影像产品管理,仅考虑影像产品本身的信息作为管理要素,无法满足石油行业遥感应用要求这一问题,提出一种面向三维石油遥感应用的多时相数据管理方法,通过采用数据组织目录结构与瓦片存储目录结构相结合的方式,建立了多时相影像数据的分级管理与访问。该方法满足石油遥感应用多样性、应用的油区范围分散、多数据源组合、油区变化性检测的要求,并以鄱阳湖三角洲环境变化中多时相数据管理为例进行了软件实现。

Research on the Jilin Oilfield Field Trials of Microbial Enhanced Oil Recovery

This paper describes the experience of Jilin oilfield trials for Microbial Enhanced Oil Recovery (MEOR). A new technique to identify microbes with DNA for MEOR has been established, and useful microbes selected for use in field trials. Behaviors of bacteria activated in the reservoir, oil recovery and water cut, and the viscosity of crude oil produced through huff & puff testing and flooding with molasses-injection tests, have been investigated in situ. CJF-002, which produces biopolysaccharide, is the best among the microbes used for field trials, as it can use molasses as nutrient and produce a small quantity of CO2 and a mass of water-insoluble biopolymer. The metabolic behavior in the reservoir showed that CJF-002 had a good potentiality for MEOR.

Prediction of Injection-Production Ratio with BP Neural Network

Injection of water to enhance oil production is commonplace, and improvements in understanding the process are economically important. This study examines predictive models of the injection-to-production ratio. Firstly, the error between the fitting and actual injection-production ratio is calculated with such methods as the injection-production ratio and water-oil ratio method, the material balance method, the multiple regression method, the gray theory GM (1,1) model and the back-propogation (BP) neural network method by computer applications in this paper. The relative average errors calculated are respectively 1.67%, 1.08%, 19.2%, 1.38% and 0.88%. Secondly, the reasons for the errors from different prediction methods are analyzed theoretically, indicating that the prediction precision of the BP neural network method is high, and that it has a better self-adaptability, so that it can reflect the internal relationship between the injection-production ratio and the influencing factors. Therefore, the BP neural network method is suitable to the prediction of injection-production ratio.

Fault diagnosis and analysis of main sea water pump based on vibration monitoring in offshore oil field

The main sea water pump is the key equipment for the floating production storage and offloading （FPSO）. Affected by some factors such as hull deformation, sea water corrosion, rigid base and pipeline stress, the vibration value of main sea water pump in the horizontal direction is abnormally high and malfunctions usually happen. Therefore, it is essential to make fault diagnosis of main sea water pump, By conventional off-line monitoring and vibration amplitude spectrum analysis, the fault cycle is found and the alarm value and stop value of equipment are set, which is helpful to equipment maintenance and accident prevention.

Predicting the distribution of reservoirs by applying the method of seismic data structure characteristics： Example from the eighth zone in Tahe Oilfield

Seismic data structure characteristics means the waveform character arranged in the time sequence at discrete data points in each 2-D or 3-D seismic trace. Hydrocarbon prediction using seismic data structure characteristics is a new reservoir prediction technique. When the main pay interval is in carbonate fracture and fissure-cavern type reservoirs with very strong inhomogeneity, there are some difficulties with hydrocarbon prediction. Because of the special geological conditions of the eighth zone in the Tahe oil field, we apply seismic data structure characteristics to hydrocarbon prediction for the Ordovician reservoir in this zone. We divide the area oil zone into favorable and unfavorable blocks. Eighteen well locations were proposed in the favorable oil block, drilled, and recovered higher output of oil and gas.

Prediction of Fracture-Cavity System in Carbonate Reservoir： A Case Study in the Tahe Oilfield

The carbonate rocks in Tahe oilfield, which suffered from multi-period polycycle karstification and structure deformation, are heterogeneous reservoirs that are rich in pores, cavities,and fractures. The reservoirs are diversified in scale, space configuration, and complex in filling. For this kind of reservoir, a suite of seismic prestack or poststack prediction techniques has been developed based on the separation of seismic wave fields. Through cross-verification of the estimated results,a detailed description of palaeogeomorphology and structural features such as pores, cavities, and fractures in unaka has been achieved, the understanding of the spatial distribution of reservoir improved.

Kinetic Performance of Oil-field Produced Water Treatment by Biological Aerated Filter

The biological aerated filter （BAF） was used to treat the oil-field produced water. The removal efficiency for oil, COD, BOD and suspended solids （SS） was 76.3%-80.3%, 31.6%-57.9%, 8.6.3%-96.3% and76.4%--82.7%, respectively when the hydraulic loading rates varied from 016m·h^-1 to 1.4m·h^-1. The greatest partof removal, for example more than 80% of COD removal, occurred on the top 100cm of the media in BAF. The kinetic .performance of BAF indicated that the relationship of BOD removal efficiency with the hydraulic loadingrates, in biological aerated filters could be described by c1/c1=l-exp（-2.44/L^0.59）. This equation could be used topredict the B OD.removal efficiency at different hydraulic loading rates.

Subtle trap recognition based on seismic sedimentology- A case study from Shengli Oilfield

Seismic sedimentology is the study of sedimentary rocks and facies using seismic data. However, often the sedimentary body features can＇t be described quantitatively due to the limit of seismic resolution. High resolution inversion offsets this limitation and is applied to seismic sedimentology to identify subtle traps under complex geologic conditions, thereby widening the applicable range of seismic sedimentology. In this paper, based on seismic sedimentology, seismic phase-controlled nonlinear random inversion is used to predict the sandy conglomerate reservoir of Es3 in the Chezhen depression in Shengli Oilfield. Thickness and sedimentary microfacies maps of sandy conglomerate bodies in several stages are presented and several subtle traps were predicted and verified by drilling.

Application of multipole array sonic logging to acid hydralic fracturing

Multipole array sonic logging tools have widely been employed in Chinese oilfields in recent years. We have developed a software package for rock mechanical analysis with multipole array sonic logs. This advanced data processing method and software have been applied to the Tahe oilfield in Northern West China to provide guidance to acid hydraulic fracturing design and evaluation. In this paper, we present the field examples of such data processing and applications to demonstrate the validity and advantages of our method and software package.

Marine Engineering Geological Exploration Information System(MEGEIS):A GIS-based Application to Marine Resources Exploitation

Based on the ArcGIS geographic information system and the ORACLE database management system,this paper reports our studies on the technology of Marine Engineering Geological Exploration Information System(MEGEIS). By analyzing system structure,designing function modules and discussing data management,this paper systematically proposes a framework of technol-ogy to integrate,manage,and analyze the seabed information comprehensively. Then,the technology is applied to the design and development of the Bohai Sea Oilfield Paradigm Area Information System. The system can not only meet the practical demands of marine resources exploration and exploitation in the Bohai Sea oilfield,but also serve as a preparatory work in theory and technology for the realization of the 'Digital Seabed'.

Offshore Multi-Wave Seismic Exploration in Bohai

In Oilfield A, of south Bohai, the large area (20km^2) of gas in the shallow layer of the main structure makes a "gas cloud" effect in the seismic section. It makes the seismic migration imaging of the deeper aim layer inconsistent with the actual features of a geologic structure. But, the converted waves,PS waves, containing effective information of incident compressed (P) waves, can create converted S waves. The S wave is affected little by the shallow layer screen, allowing better imaging of the deeper layer. So, 4C seismic acquisition was carried out on the structure. Through geologic reconnaissance on the site, shallow layer drilling analysis and multicomponent seismic experiments, the offshore acquisition flows are designed. Choosing appropriate processing flows for converted waves and paying attention to the key tache of processing, a high quality 2D converted wave section was obtained. By identifying the character of the seismic wave correctly, making use of the full wave logging, producing synthetic converted wave seismogram, and identifying horizon, we can carry out structure interpretation and reserve evaluation of the oilfield.

Bioflocculant Produced by Klebsiella sp. MYC and Its Appli-cation in the Treatment of Oil-field Produced Water

Seventy-nine strains of bioflocculant-producing bacteria were isolated from 3 activated sludge samples. Among them, strain MYC was found to have the highest and stable flocculating rate for both kaolin clay suspension and oil-field produced water. The bacterial strain was identified as Klebsiella sp. MYC according to its morphological and biochemical characteristics and 16SrDNA sequence. The optimal medium for bioflocculant production by this bacterial strain was composed of cane sugar 20 g L^-1, KH2PO4 2 g L^-1, K2HPO4 5 g L^- 1, （ NH4）2SO4 0.2 g L^-1, urea 0.5 g L^- 1 and yeast extract 0.5 g L^- 1, the initial pH being 5.5. When the suspension of kaolin clay was treated with0.5% of Klebsiella sp. MYC culture broth, the flocculating rate reached more than 90.0% in the presence of 500mg L^-1 CaCI2, while the flocculating rate for oil-field produced water was near 80.0% in a pH range of 7.0 - 9.0 with the separation of oil and suspended particles from the oil-field produced water under similar conditions. The environment-friendly nature of the bioflocculant and high flocculating rate of the strain make the bioflocculant produced by Klebsiella sp. MYC an attractive bioflocculant in oil-field produced water treatment.

A Novel Process for Natural Gas Liquids Recovery from Oil Field Associated Gas with Liquefied Natural Gas Cryogenic Energy Utilization

A novel process to recovery natural gas liquids from oil field associated gas with liquefied natural gas (LNG)cryogenic energy utilization is proposed.Compared to the current electric refrigeration process,the proposed process uses the cryogenic energy of LNG and saves 62.6%of electricity.The proposed process recovers ethane, liquid petroleum gas(propane and butane)and heavier hydrocarbons,with total recovery rate of natural gas liquids up to 96.8%.In this paper,exergy analysis and the energy utilization diagram method(EUD)are used to assess the new process and identify the key operation units with large exergy loss.The results show that exergy efficiency of the new process is 44.3%.Compared to the electric refrigeration process,exergy efficiency of the new process is improved by 16%.The proposed process has been applied and implemented in a conceptual design scheme of the cryogenic energy utilization for a 300 million tons/yr LNG receiving terminal in a northern Chinese harbor.

The effect of slight to minor biodegradation on C_6 to C_7 light hydrocarbons in crude oils: a case study from Dawanqi Oilfield in the Tarim Basin,NW China

Light hydrocarbons （LHs） are one of the main petroleum fractions in crude oils, and carry much infor- mation regarding the genetic origin and alteration of crude oils. But secondary alterations--especially biodegrada- tion--have a significant effect on the composition of LHs in crude oils. Because most of the LHs affected in oils underwent only slight biodegradation （rank 1 on the biodegradation scale）, the variation of LHs can be used to describe more the refined features of biodegradation. Here, 23 crude oils from the Dawanqi Oilfield in the Tarim Basin, NW China, eleven of which have been biodegraded to different extents, were analyzed in order to investigate the effect of slight to minor biodegradation on C6--C7 LHs. The study results showed that biodegradation resulted in the prior depletion of straight-chained alkanes, followed by branched alkanes. In slight and minor biodegraded oils, such biodegradation scale could not sufficiently affect C6- C7 cycloalkanes. For branched C6--C7 alkanes, generally, monomethylalkanes are biodegraded earlier than dimethylalkanes and trimethylalkanes, which indicates that branched alkanes are more resistant to biodegradation, with the increase of substituted methyl groups on parent rings. The degree of alkylation is one of the primary controlling factors on the biodegradation of C6-Cv LHs. There is a particular case： although 2,2,3-trimethylbutane has a rela- tive higher alkylation degree, 2,2-dimethylpentane is more resistant to biodegradation than 2,2,3-trimethylbutane. 2,2- Dimethylpentane is the most resistant to biodegradation in branched C6-C7 alkanes. Furthermore, the 2-methylpen- tane/3-methylpentane and 2-methylhexane/3-methylhexane ratios decreased steadily with increasing biodegradation, which implies that isomers of bilateral methyl groups are more prone to bacterial attack relative to mid-chain iso- mers. The position of the alkyls on the carbon skeleton is also one of the critical factors controlling the rate of biodegradation. With increasing biodegradation, Mango＇s LH parameters K1 values decrease and K2 values increase, the values of n-heptane and isoheptane decrease, and the indices of methylcyclohexane and cyclohexane increase. LH parameters should be applied cautiously for the biodegraded oils. Because biodegraded samples belong to slight or minor biodegraded oils, the values of n-heptane and isoheptane from Dawanqi Oilfield can better reflect and determine the ＂Biodegraded＂ zone. When the heptane value is 0-21 and the isoheptane value is 0-2.6, the crude oil in Dawanqi Oilfield is defined as the ＂Biodegraded＂ zone

Near-surface absorption compensation technology and its application in the Daqing Oilfields

High-frequency seismic data components can be seriously attenuated during seismic wave propagation in unconsolidated （low-velocity） layers, resulting in reduced seismic resolution and signal-to-noise （S/N） ratio. In this paper, first, based on Wiener filter theory, inverse filter calculations for near-surface absorption attenuation compensation were accomplished by analysis of the direct wave spectral components from different distances near the surface. The direct waves were generated by detonators in uphole shots and were acquired by receivers on the surface. The spatially varying inverse filters were designed to compensate for the frequency attenuation of 3D pre-stack CRG （common receiver-gather） data. After applying the filter to CRG data, the high frequency components were compensated with the low frequencies maintained. The seismic resolution and S/N ratio are enhanced and match better with synthetic seismograms and better meet the needs of geological interpretation.

Performance analysis and improvement of geothermal binary cycle power plant in oilfield

In order to improve the efficiency of a geothermal power plant, oil wells in the high water cut stage were used as geothermal wells, thereby improving the recovery ratio and economic benefit. A new function that reflects both the technical and economic performances was put forward and used as the objective function. An organic Rankine cycle (ORC) was analyzed through the energetic and exergetic analyses, and the reasons for low efficiency were pinpointed. Results indicate that geothermal water directly transferring heat to the working fluid reduces energy dissipation and increases cycle efficiencies. The net power output with an internal heat exchanger (IHE) is averagely 5.3% higher than that without an IHE. R601a and R601 can be used to replace R123 for geothermal water below 110℃. Moreover, the modified ORC dramatically outperforms the actual one.

Effect of absorption boundary layer on nonlinear flow in low permeability porous media

Taking low permeability cores of Daqing oilfield for example,the flow characteristics at low velocity were studied with the self-designed micro-flux measuring instrument.Considering the throat distribution and capillary model,the thickness of fluid boundary layer under different pressure gradients was calculated,and the mechanism and influencing factors of nonlinear percolation were discussed.The results show that the percolation curve of ultra-low rocks is nonlinear,and apparent permeability is not a constant which increases with pressure gradient.The absorption boundary layer decreases with the increase of pressure gradient,and changes significantly especially in low pressure gradient,which is the essence of nonlinear percolation.The absorption boundary layer is also found to be impacted by the surface property of rocks.