In this study,with La_(0.8)Sr_(0.2)Cr_(0.5)Fe_(0.5)O_(3-δ)(LSCrF)and Ce_(0.8)Sm_(0.2)O_(1.9)(SDC)taken as the electronic conducting phase and the oxide ion conductor,respectively,dual-phase composite ceramic membrane...In this study,with La_(0.8)Sr_(0.2)Cr_(0.5)Fe_(0.5)O_(3-δ)(LSCrF)and Ce_(0.8)Sm_(0.2)O_(1.9)(SDC)taken as the electronic conducting phase and the oxide ion conductor,respectively,dual-phase composite ceramic membranes with or without 3%(in mole)Y_(2)O_(3) stable ZrO_(2)(3YSZ)support were prepared and tested as oxygen separation membranes.Then,the oxygen transmission performance was tested by the electrochemical method based on the limiting current.The results obtained with this method coincide with those acquired by means of gas chromatography.Furthermore,the dependences of oxygen permeation rate on oxygen partial pressure,temperature and ceramic membrane thickness were analyzed.When air was used as the sweeping gas on the porous 3YSZ supported SDC-LSCrF dual-phase membrane,the oxygen permeation rate can reach 0.73,0.82,0.90 and 0.97 mL cm^(-2) min^(-1) at 650,700,750 and 800℃,respectively.展开更多
Benefiting from excellent mechanical properties and low density,cellular ceramic structures(CCSs)are competitive candidates as structural components.However,inherent brittleness from strong chemical bonds among atoms ...Benefiting from excellent mechanical properties and low density,cellular ceramic structures(CCSs)are competitive candidates as structural components.However,inherent brittleness from strong chemical bonds among atoms extremely impeded CCSs'application.Natural materials occupied outstanding strength and toughness simultaneously due to the dual-phase interpenetrated structure.Inspired by natural materials,it was proposed to fabricate coating covered and fulfilled polyurea/CCS interpenetrated composites(C/CCSs and B/CCSs)to circumvent the brittleness of 3D-printed Al_(2)O_(3)CCSs.It was demonstrated that polyurea coating had less effect on the compressive strength of C/CCSs but tremendously improved their energy-absorbing ability.The energy-absorbing ability of C/CCSs was improved from26.48-52.57 kJ·m^(-3)of CCSs to 1.04-1.89 MJ·m^(-3)because of the extended plateau stage.Furthermore,compressive strength and energy-absorbing ability of B/CCSs were strengthened to 1.33-1.36 and 2.84-4.61 times of C/CCSs,respectively.Besides,failure mode of C/CCSs changed from localized deformation to fracturing entirely with the increase in relative density of CCSs inside,which was the same as that of CCSs.However,with the help of polyurea coating,C/CCSs were still intact at strains up to60%,which would neve r fail catastrophically as CCSs at low strains.B/CCSs tended to fracture as a whole,which was not influenced by relative density of pristine CCSs.It was believed that this work provided a creative way to circumvent the brittleness of CCSs and improve their mechanical performances.展开更多
基金The financial support from the National Natural Science Foundation of China(No.51672297 and No.51836004)is highly appreciated.
文摘In this study,with La_(0.8)Sr_(0.2)Cr_(0.5)Fe_(0.5)O_(3-δ)(LSCrF)and Ce_(0.8)Sm_(0.2)O_(1.9)(SDC)taken as the electronic conducting phase and the oxide ion conductor,respectively,dual-phase composite ceramic membranes with or without 3%(in mole)Y_(2)O_(3) stable ZrO_(2)(3YSZ)support were prepared and tested as oxygen separation membranes.Then,the oxygen transmission performance was tested by the electrochemical method based on the limiting current.The results obtained with this method coincide with those acquired by means of gas chromatography.Furthermore,the dependences of oxygen permeation rate on oxygen partial pressure,temperature and ceramic membrane thickness were analyzed.When air was used as the sweeping gas on the porous 3YSZ supported SDC-LSCrF dual-phase membrane,the oxygen permeation rate can reach 0.73,0.82,0.90 and 0.97 mL cm^(-2) min^(-1) at 650,700,750 and 800℃,respectively.
基金financially supported by the National Natural Science Foundation of China(No.52275310)the Open Project of State Key Laboratory of Explosion Science and Technology(No.QNKT22-15)the BIT Research and Innovation Promoting Project(No.2022YCX020)。
文摘Benefiting from excellent mechanical properties and low density,cellular ceramic structures(CCSs)are competitive candidates as structural components.However,inherent brittleness from strong chemical bonds among atoms extremely impeded CCSs'application.Natural materials occupied outstanding strength and toughness simultaneously due to the dual-phase interpenetrated structure.Inspired by natural materials,it was proposed to fabricate coating covered and fulfilled polyurea/CCS interpenetrated composites(C/CCSs and B/CCSs)to circumvent the brittleness of 3D-printed Al_(2)O_(3)CCSs.It was demonstrated that polyurea coating had less effect on the compressive strength of C/CCSs but tremendously improved their energy-absorbing ability.The energy-absorbing ability of C/CCSs was improved from26.48-52.57 kJ·m^(-3)of CCSs to 1.04-1.89 MJ·m^(-3)because of the extended plateau stage.Furthermore,compressive strength and energy-absorbing ability of B/CCSs were strengthened to 1.33-1.36 and 2.84-4.61 times of C/CCSs,respectively.Besides,failure mode of C/CCSs changed from localized deformation to fracturing entirely with the increase in relative density of CCSs inside,which was the same as that of CCSs.However,with the help of polyurea coating,C/CCSs were still intact at strains up to60%,which would neve r fail catastrophically as CCSs at low strains.B/CCSs tended to fracture as a whole,which was not influenced by relative density of pristine CCSs.It was believed that this work provided a creative way to circumvent the brittleness of CCSs and improve their mechanical performances.
