Studies on Human Fetal Lens Crystallins Under Oxidative Stress and Protective Effects of Tea Polyphenols

Purpose: To investigate the oxidative modification of water-soluble crystallins of human fetal lens with H2O2 and fourteen metal ions with or without EDTA. Tea-polyphenols (TP) was added to above solutions in order to testing their antioxidative abilities. Methods: The experiments were performed at 37℃ with final concentration of 2.5mg/ml protein, 0.1 mM metal ions, 0.3 mM EDTA and 1.0 mM H2O2. Then the TP was added to the solution with CuSO4 and H2O2, after 5 or 24 hours, the crystallins were analysed with SDS-PAGE and IEF.Results : There were marked oxidative modifications of lens protein in H2O2 and copper without EDTA. In SDS-PAGE patterns, we found an increase in those species above of bands higher than 30 kD and some diffuse bands from 30 to 17 kD after 5 hours. In IEF patterns, there were a general increase on acidity with loss of the more basic species. When the TP was added, there was not any difference with control group.Conclusion: The results indicate that exposure of water-soluble

Constructing long-cycling crystalline C_(3)N_(4)-based carbonaceous anodes for sodium-ion battery via N configuration control

Carbon nitrides with two-dimensional layered structures and high theoretical capacities are attractive as anode materials for sodium-ion batteries while their low crystallinity and insufficient structural stability strongly restrict their practical applications.Coupling carbon nitrides with conductive carbon may relieve these issues.However,little is known about the influence of nitrogen(N)configurations on the interactions between carbon and C_(3)N_(4),which is fundamentally critical for guiding the precise design of advanced C_(3)N_(4)-related electrodes.Herein,highly crystalline C_(3)N_(4)(poly(triazine imide),PTI)based all-carbon composites were developed by molten salt strategy.More importantly,the vital role of pyrrolic-N for enhancing charge transfer and boosting Na+storage of C_(3)N_(4)-based composites,which was confirmed by both theoretical and experimental evidence,was spot-highlighted for the first time.By elaborately controlling the salt composition,the composite with high pyrrolic-N and minimized graphitic-N content was obtained.Profiting from the formation of highly crystalline PTI and electrochemically favorable pyrrolic-N configurations,the composite delivered an unusual reverse growth and record-level cycling stability even after 5000 cycles along with high reversible capacity and outstanding full-cell capacity retention.This work broadens the energy storage applications of C_(3)N_(4) and provides new prospects for the design of advanced all-carbon electrodes.

Biodegradation of Crystalline Chitin:A Review of Recent Advancement,Challenges,and Future Study Directions

Chitin is the second most abundant renewable polysaccharide on Earth.The degradation of chitin into soluble and bioactive N-acetyl chitooligosaccharides(NCOSs)and N-acetyl-D-glucosamine(GlcNAc)has emerged as a pivotal step in the efficient and sustainable utilization of chitin resources.However,because of its dense structure,high crystallinity,and poor solubility,chitin typically needs pretreatment via chemical,physical,and other methods before enzymatic conversion to enhance the accessibility between substrates and enzyme molecules.Consequently,there has been considerable interest in exploring the direct biological degradation of crystalline chitin as a cost-effective and environment-friendly technology.This review endeavors to present several biological methods for the direct degradation of chitin.We primarily focused on the importance of chitinase containing chitin-binding domain(CBD).Additionally,various modification strategies for increasing the degradation efficiency of crystalline chitin were introduced.Subsequently,the review systematically elucidated critical components of multi-enzyme catalytic systems,highlighting their potential for chitin degradation.Furthermore,the application of microorganisms in the degradation of crystalline chitin was also discussed.The insights in this review contribute to the explorations and investigations of enzymatic and microbial approaches for the direct degradation of crystalline chitin,thereby fostering advancements in biomass conversion.

Tuning the crystallinity of titanium nitride on copper-embedded carbon nanofiber interlayers for accelerated electrochemical kinetics in lithium-sulfur batteries

The development of lithium-sulfur(Li-S)batteries is hindered by the disadvantages of shuttling of polysulfides and the sluggish redox kinetics of the conversion of sulfur species during discharge and charge.Herein,the crystallinities of a titanium nitride(TiN)film on copper-embedded carbon nanofibers(Cu-CNFs)are regulated and the nanofibers are used as interlayers to resolve the aforementioned crucial issues.A low-crystalline TiN-coated Cu-CNF(L-TiN-Cu-CNF)interlayer is compared with its highly crystalline counterpart(H-TiN-Cu-CNFs).It is demonstrated that the L-TiN coating not only strengthens the chemical adsorption toward polysulfides but also greatly accelerates the electrochemical conversion of polysulfides.Due to robust carbon frameworks and enhanced kinetics,impressive highrate performance at 2 C(913 mAh g^(-1)based on sulfur)as well as remarkable cyclic stability up to 300 cycles(626 mAh g^(-1))with capacity retention of 46.5%is realized for L-TiN-Cu-CNF interlayer-configured Li-S batteries.Even under high loading(3.8 mg cm^(-2))of sulfur and relatively lean electrolyte(10μL electrolyte per milligram sulfur)conditions,the Li-S battery equipped with L-TiN-Cu-CNF interlayers delivers a high capacity of 1144 mAh g^(-1)with cathodic capacity of 4.25 mAh cm^(-2)at 0.1 C,providing a potential pathway toward the design of multifunctional interlayers for highly efficient Li-S batteries.

Synthesis of crystalline g-C_(3)N_(4) with rock/molten salts for efficient photocatalysis and piezocatalysis

Graphitic carbon nitride(g-C_(3)N_(4))is emerging as a promising visible-light photocatalyst while the low crystallinity with sluggish charge separation/migration dynamics significantly restricts its practical applications.Currently,synthesizing highly crystalline g-C_(3)N_(4) with sufficient surface activities still remains challenging.Herein,different from using alkali molten salts which is commonly reported,we propose an approach for synthesis of highly crystalline g-C_(3)N_(4) with FeCl3/KCl rock/molten mixed salts.The rock salt can serve as the structure-directing template while molten salt provides the required liquid medium for re-condensation.Intriguingly,the synthesized photocatalyst showed further enhanced crystallinity and improved surface area along with high p/p*excitation compared with crystalline C_(3)N_(4) prepared from conventional molten-salt methods.These catalytically advantageous features lead to its superior photocatalytic and piezocatalytic activities with a high reactivity for overall water splitting that is not commonly reported for C_(3)N_(4).This work provides an effective strategy for structural optimization of organic semiconductor based materials and may inspire new ideas for the design of advanced photocatalysts.

Three-dimensional topological crystalline insulator without spin-orbit coupling in nonsymmorphic photonic metacrystal

By including certain point group symmetry in the classification of band topology,Fu proposed a class of threedimensionaltopological crystalline insulators(TCIs)without spin-orbit coupling in 2011.In Fu’s model,surface states(ifpresent)doubly degenerate atГandM when time-reversal and C_(4) symmetries are preserved.The analogs of Fu’s modelwith surface states quadratically degenerate atM are widely studied,while surface states with quadratic degeneracy atГare rarely reported.In this study,we propose a three-dimensional TCI without spin-orbit coupling in a judiciously designednonsymmorphic photonic metacrystal.The surface states of photonic TCIs exhibit quadratic band degeneracy in the(001)surface Brillouin zone(BZ)center(Гpoint).The gapless surface states and their quadratic dispersion are protected by C4and time-reversal symmetries,which correspond to the nontrivial band topology characterized by Z_(2)topological invariant.Moreover,the surface states along lines fromГto the(001)surface BZ boundary exhibit zigzag feature,which is interpretedfrom symmetry perspective by building composite operators constructed by the product of glide symmetries with timereversalsymmetry.The metacrystal array surrounded with air possesses high order hinge states with electric fields highlylocalized at the hinge that may apply to optical sensors.The gapless surface states and hinge states reside in a cleanfrequency bandgap.The topological surface states emerge at the boundary of the metacrystal and perfect electric conductor(PEC),which provide a pathway for topologically manipulating light propagation in photonic devices.

Comparative Studies of the Carbohydrate of Human Gamma-Crystallins from Fetal and Adult Lenses with Agglutinins

Using gel chromatography of Sephadex G-75 superfine connectedwith Sephadex G-50 fine column,three human γ- crystallins(γ1,γ2,γ3)couldbe obtained.Seven agglutinins(LCA,SBA,DBA,PNA,BSL,RCA and UEA)were used to detect the sugar of sub-γ-crystallins,which had been transferredto nitrocellulose membrane and finally stained with ABC reagents and the sub-strate of HPR.These results suggested that γ2-and γ3-crystallin contain sugar,but γ1-crystallin has no sugar.There is a decrease of carbohydrate of γ2 and γ3as...

Effect of high-energy Ne ions irradiation on mechanical properties difference between Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5)metallic glass and crystalline W

In this paper,high-energy Ne ions were used to irradiate Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) metallic glass(MG)and crystalline W to investigate their difference in mechanical response after irradiation.The results showed that with the irradiation dose increased,the tensile micro-strain increased,nano-hardness increased from 7.11 GPa to 7.90 GPa and 8.62 GPa,Young’s modulus increased,and H3/E2 increased which indicating that the plastic deformability decreased in crystalline W.Under the same irradiation conditions,the Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG still maintained the amorphous structure and became more disordered despite the longer range and stronger displacement damage of Ne ions in Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG than in crystalline W.Unlike the irradiation hardening and embrittlement behavior of crystalline W,Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG showed the gradual decrease in hardness from 6.02 GPa to 5.89 GPa and 5.50 GPa,the decrease in modulus and the increase in plastic deformability with the increasing dose.Possibly,the irradiation softening and toughening phenomenon of Zr_(63.5)Cu_(23)Al_(9)Fe_(4.5) MG could provide new ideas for the design of nuclear materials.

Crystallinity-defect matching relationship of g-C_(3)N_(4): Experimental and theoretical perspectives

Good crystallinity can reduce the charge recombination centers caused by defects,whilst structures with strong polycondensation have high charge mobility,leading to more charge transfer to the material surface for reaction.Much effort has been put into the preparation of a highly efficient g-C_(3)N_(4) with defects to improve its application potential under the premise in high crystallinity.Hence,this review paper emphasizes the importance to balance the defect and crystallinity of g-C_(3)N_(4).In addition,detailed discussion on the relationship between defects and activity of g-C_(3)N_(4) was carried out based on its applications in environmental purification(e.g.,VOCs oxidation,NO_(x) oxidation,H_(2)O_(2) evolution,sterilization,pesticide oxidation)and energy conversion(H_(2) evolution,N_(2) fixation and CO_(2) reduction).Lastly,the challenge in developing more efficient defective g-C_(3)N_(4) photocatalytic materials is summarized.

Shock-induced energy localization and reaction growth considering chemical-inclusions effects for crystalline explosives

Chemical inclusions significantly alter shock responses of crystalline explosives in macroscale gap experiments but their microscale dynamics origin remains unclear.Herein shock-induced energy localization,overall physical responses,and reactions in a-1,3,5-trinitro-1,3,5-triazinane(a-RDX)crystal entrained various chemical inclusions were investigated by the multi-scale shock technique implemented in the reactive molecular dynamics method.Results indicated that energy localization and shock reaction were affected by the intrinsic factors within chemical inclusions,i.e.,phase states,chemical compositions,and concentrations.The atomic origin of chemical-inclusions effects on energy localization is dependent on the dynamics mechanism of interfacial molecules with free space volume,which includes homogeneous intermolecular compression,interfacial impact and shear,and void collapse and jet.As introducing various chemical inclusions,the initiation of those dynamics mechanisms triggers diverse decay rates of bulk RDX molecules and hereby impacts on growth speeds of final reactions.Adding chemical inclusions can reduce the effectiveness of the void during the shock impacting.Under the shockwave velocity of 9 km/s,the parent RDX decay rate in RDX entrained amorphous carbon decreases the most and is about one fourth of that in RDX with a vacuum void,and solid HMX and TATB inclusions are more reactive than amorphous carbon but less reactive than dry air or acetone inclusions.The lessdense shocking system denotes the greater increases in local temperature and stress,the faster energy liberation,and the earlier final reaction into equilibrium,revealing more pronounced responses to the present intense shockwave.The quantitative models associated with the relative system density(RD_(sys))were proposed for indicating energy-localization mechanisms and evaluating initiation safety in the shocked crystalline explosive.RD_(sys)is defined by the density ratio of defective RDX to perfect crystal after dynamics relaxation and reveals the global density characteristic in shocked systems filled with chemical inclusions.When RD_(sys)is below 0.9,local hydrodynamic jet initiated by void collapse dominates upon energy localization instead of interfacial impact.This study sheds light on novel insights for understanding the shock chemistry and physical-based atomic origin in crystalline explosives considering chemical-inclusions effects.

Organic Compounds Possessing the Plastic Crystalline Phase: Calculation of Their Fusion Enthalpies

For the first time, for different organic and inorganic compounds possessing the plastic crystalline phase, a new semiempirical equation describing dependence of their fusion enthalpies on such physico-chemical quantities as normal melting temperature, surface tension, molar volume and critical molar volume is received on the base of the principle of corresponding states and the energy equipartition theorem. Moreover, the proposed equation allows one to take into account the particularities of one-particle molecular rotation in the plastic crystalline phase.

Isolation of Microcrystalline Cellulose from Wood and Fabrication of Polylactic Acid(PLA)Based Green Biocomposites

An innovative microcrystalline cellulose(MCC)natural fibre powder-reinforced PLA biocomposite was investigated using the hand lay-up technique.The polymer matrix composite(PMC)samples were prepared by varying the weight percentages(wt.%)of both PLA matrix and MCC reinforcement:pure PLA/100:0,90:10,80:20,70:30,60:40 and 50:50 wt.%,respectively.From the results obtained,MCC powder,with its impressive aspect ratio,proved to be an ideal reinforcement for the PLA,exhibiting exceptional mechanical properties.It was evident that the 80:20 wt.%biocomposite sample exhibited the maximum improvement in the tensile,flexural,notched impact,compressive strength and hardness by 28.85%,20.00%,91.66%,21.53%and 35.82%,respectively compared to the pure PLA sample.Similarly,during the thermogravimetric analysis(TGA),the same 80:20 wt.%biocomposite sample showed a minimum weight loss of 20%at 400℃,among others.The morphological study using Field Emission Scanning Electron Microscopy(FE-SEM)revealed that the uniform distribution of cellulose reinforcement in the PLA matrix actively improved the mechanical properties of the biocomposites,especially the optimal 80:20 wt.%sample.Importantly,it was evident that the optimal PLA/cellulose biocomposite sample could be a suitable and alternative sustainable,environmentally friendly and biodegradable material for semi/structural applications,replacing synthetic and traditional components.

Strength criterion for crystalline rocks considering grain size effect and tensile-compressive strength ratio

The macroscopic mechanical properties of rocks are significantly influenced by their microstructure.As a material bonded by mineral grains,the grain morphology of crystalline rock is the primary factor influencing the strength.However,most strength criteria neglect the strength variations caused by different grain characteristics in rocks.Furthermore,the traditional linear criteria tend to overestimate tensile strength and exhibit apex singularity.To address these shortcomings,a piecewise strength criterion that considers the grain size effect has been proposed.A part of an ellipse was employed to construct the envelope of the tensive-shear region on the meridian plane,to accurately reproduce the low tensile-compressive strength ratio.Based on the analysis of experimental data,both linear and exponential modification functions that account for grain size effects were integrated into the proposed criterion.The corresponding finite element algorithm has been implemented.The accuracy and applicability of the proposed criterion were validated by comparing with the experimental data.

Laser-Constructing 3D Copper Current Collector with Crystalline Orientation Selectivity for Stable Lithium Metal Batteries

The practical application of lithium(Li)metal anodes in high-capacity batteries is impeded by the formation of hazardous Li dendrites.To address this challenge,this research presents a novel methodology that combines laser ablation and heat treatment to precisely induce controlled grain growth within laser-structured grooves on copper(Cu)current collectors.Specifically,this approach enhances the prevalence of Cu(100)facets within the grooves,effectively lowering the overpotential for Li nucleation and promoting preferential Li deposition.Unlike approaches that modify the entire surface of collectors,our work focuses on selectively enhancing lithiophilicity within the grooves to mitigate the formation of Li dendrites and exhibit exceptional performance metrics.The half-cell with these collectors maintains a remarkable Coulombic efficiency of 97.42%over 350 cycles at 1 mA cm^(−2).The symmetric cell can cycle stably for 1600 h at 0.5 mA cm^(−2).Furthermore,when integrated with LiFePO4 cathodes,the full-cell configuration demonstrates outstanding capacity retention of 92.39%after 400 cycles at a 1C discharge rate.This study introduces a novel technique for fabricating selective lithiophilic three-dimensional(3D)Cu current collectors,thereby enhancing the performance of Li metal batteries.The insights gained from this approach hold promise for enhancing the performance of all laser-processed 3D Cu current collectors by enabling precise lithiophilic modifications within complex structures.

Potassium Iodide and Acrylamide Fluorescence Quenching Studies on Gamma-Crystallins of Human Lenses in Development and Aging

γ_1-γ_2-and γ_3-crystallin(corresponding to γs-,γC-and γD- crys-tallin respectively)of human fetal,2 year and 20^+ year old lenses areseparated by Sephadex gel chromatography.lodide and acrylamide are usedto quench the tryptophane fluorescence of sub-γ-crystalline fractions and Ksvand fa values are calculated.The results show that iodide has no clear quench-ing effects on all γ-crystallins,the quenching effects of acrylamide on the tryp-tophan fluorescences of γ1-γ2-and γ3-crystallin from lenses of the ...

视网膜α-crystallins在增生性视网膜疾病中的研究进展

α-crystallins是小分子热休克蛋白家族(small-molecule heat shock protein,sHSP)的重要成员,包括αA-crystallin和αB-crystallin,在各类组织细胞中具有细胞保护和分子伴侣功能。近年来,多项研究发现,视网膜组织α-crystallins可利用自身特性通过各种途径参与增生性视网膜病的血管新生、上皮/内皮细胞间质化等过程。本文主要介绍α-crystallins,尤其是αB-crystallin调节增生性视网膜疾病发展的分子机制,探讨其潜在的临床应用价值。

Distribution of Human Lens Crystallins and Their Sulphydryl Contents of Different Age in Two-dimension Electrophoresis

Purpose: To analyze water-soluble(WS) human lens proteins of fetus, adult and age-related cataract by two-dimensional IEF/SDSPAGE electrophoresis. Methods: DACM [ N- (7-Dimethylamino-4-methyl-3-coumarinyl) maleimide ] was used to determine the lens proteins sulphydryl (SH) content.Result: Protein SH contents in WS lens proteins have no significant difference among fetus, adult and age-related cataract lens. This is different from the relative published results obtained in lens proteins of animal cataract model using similar SH detecting methods.Conclusions: IEF/SDS-PAGE electrophoresis demonstrated that there were much more fragmentation of crystallins during lens development and cataractogenic process. It is suggested that this phenomenon is likely to be due to further conformational changes in the fragmented cyrstallins during aging and cataractogenic process. Eye Science 1999; 15:32-35.

Preparation and Performance Study of Cementitious Capillary Crystalline Waterproof Materials

Cementitious capillary crystalline waterproof materials(CCCW for short)offer durability and excellent waterproofing properties,making them a popular option for building waterproofing.Some scholars have studied the proportioning of such materials.However,these studies lack the relationship between the impermeability pressure of mortar and the components,and the mechanism of action is somewhat debatable.Therefore,we adopted a two-step method in our experiments.Firstly,we screened out the components that significantly impact impermeability from a variety of active components by orthogonal test.We then optimized the design of the active group ratio using the simplex lattice method.Lastly,we conducted a performance test of the optimal ratio and explored the waterproofing mechanism of homemade CCCW.

α-B crystallin在乳腺浸润性导管癌中的表达及意义

目的检测α-B crystallin在乳腺癌中的表达,并探讨其在乳腺癌中表达的意义。方法应用组织芯片及免疫组织化学法对180例乳腺浸润性导管癌、17例导管原位癌及20例正常乳腺组织中α-B crystallin以及雌激素受体(ER)、孕激素受体(PR)、HER2和Ki67的表达进行检测;根据最近提出的乳腺癌分子分型进行分组,对α-B crystallin在不同分组中的表达及与其他临床病理特征的关系行统计学分析。结果①α-Bcrystallin在乳腺导管原位癌的阳性率为41.17%(7/17),浸润性导管癌的阳性率为67.22%(121/180),两组间差异有统计学意义(P<0.05);②在浸润性导管癌中,α-B crystallin在淋巴结转移组阳性率为83.33%(81/96),无转移组阳性率为48.81%(41/84),两组间差异具有统计学意义(P<0.01,r=0.368 8);③在分子分型各组中α-B crystallin的表达差异具有统计学意义(P<0.05);其中LuminalA组与HER2+组及三阴性组两两比较差异具有统计学意义(P<0.05)。结论α-B crys-tallin在乳腺浸润性导管癌中的表达明显高于导管原位癌,与淋巴结转移呈正相关,且在生物学行为更为恶性的HER2+组和三阴性组具有更高的表达水平,提示α-B crystallin蛋白可能参与了乳腺癌的浸润与转移过程。

Effect of Crystalline Structure of Wood on Liquefaction

By means of X ray and gas chromatography analysis, the crystalline structure of untreated wood , alkali treated wood and benzylated wood and their liquefaction in toluene and tetrahydrofufan with HCl as a catalyst were studied .The upper solution of benzylated wood was also studied by GC MS analysis. It proved that the introduction of bulky benzyl group in wood significantly changed the crystalline structure of wood ,enlarging the free volume which facilitated the penetration of solvent into the matrix of treated wood, thus tremendously enhancing thesolubility in solvent,compared to untreated wood and alkali treated wood. The percentage of residue decreased and the combined solvent increased with the increase of weight gain revealed that the liquefaction process became easy. Furthermore, the factors that influenced the liquefaction of benzylated wood were investigated. It showed that the liquefaction performance was improved with the increase of liquefaction time and the amount of catalyst when toluene was used as a solvent, especially in the presence of THF as solvent, there existed the optimum liquefaction time and the amount of catalyst .