Compared with aqueous single-ion batteries,rechargeable aqueous hybrid ion batteries,especially Li^(+)/Zn^(2+)hybrid ion batteries,are receiving extensive interest owing to their low cost,high operating voltage,and en...Compared with aqueous single-ion batteries,rechargeable aqueous hybrid ion batteries,especially Li^(+)/Zn^(2+)hybrid ion batteries,are receiving extensive interest owing to their low cost,high operating voltage,and energy density.However,their working voltage and lifespan are limited by the decomposition of water and the growth of Zn dendrites.Herein,detrimental side reactions induced by the water reduction and the Zn dendrite growth are successfully suppressed by a poly(propylene glycol)(PPG)-based hybrid ion electrolyte[(1 m Zn(TFSI)2+10 m LiTFSI)in PPG/H2O].The addition of PPG in the electrolyte can not only enhance the bonding strength of hydrogen-bond in water but also tailor the solvation sheath of Zn2+as revealed by synchrotron X-rays.The participated solvation of PPG with Zn^(2+)can weaken Zn-H_(2)O interactions and redistribute Zn^(2+)flux on the surface of the Zn anode,thus inducing favorably even deposition of Zn.In addition,the decomposition of TFSI-contributes a ZnF_(2)-enriched solid electrolyte interface at the Zn anode to further prevent water decomposition and restrain Zn dendrites.The PPG-based electrolyte enables 2.1 V LiMnO_(2)//Zn batteries to deliver high specific capacities(121.7 mAh g^(-1)for a coin cell and 90 mAh g^(-1)for a pouch cell),and maintain 80%of the capacity over 700 cycles at 0.5 C,suggesting a promising pathway for highly reversible aqueous hybrid ion batteries.展开更多
建立了基于聚(乙二醇-ran-丙二醇)单丁基醚(聚合物)与磷酸盐、氯化钠的双水相体系对乳清分离蛋白(WPI)中的α-乳白蛋白(α-LA)和β-乳球蛋白(β-LG)进行分离,并对其分离条件进行了优化。系统地研究了双水相体系p H值、聚合物与KH_2PO_4...建立了基于聚(乙二醇-ran-丙二醇)单丁基醚(聚合物)与磷酸盐、氯化钠的双水相体系对乳清分离蛋白(WPI)中的α-乳白蛋白(α-LA)和β-乳球蛋白(β-LG)进行分离,并对其分离条件进行了优化。系统地研究了双水相体系p H值、聚合物与KH_2PO_4溶液体积比、Na Cl添加量和WPI浓度对α-LA和β-LG的分离效果的影响,采用液相色谱法对α-LA和β-LG的分离效果进行评价。结果表明,聚合物/KH2PO4双水相体系p H=4.0,40%(m/m)聚合物与15.5%(m/m)KH2PO4的体积比为4 m L∶4 m L,Na Cl添加量为0.40 g/10 m L,WPI浓度为1 mg/m L时,α-LA和β-LG分离效果最好,上相中α-LA的萃取率为98.2%,下相中β-LG的萃取率为96.6%。展开更多
In the present work, poly（propylene glycol） （PPG） was block copolymerized to form polylactide-poly（propylene glycol）-polylactide （PL-PPG-PL） triblock copolymers for preparing flexible stereocomplex PL （scPL）...In the present work, poly（propylene glycol） （PPG） was block copolymerized to form polylactide-poly（propylene glycol）-polylactide （PL-PPG-PL） triblock copolymers for preparing flexible stereocomplex PL （scPL） blend films. The scPL blend films were prepared by solution blending of poly（L-lactide）-PPG-poly（L-lactide） （PLL-PPG-PLL） and poly（D-lactide）- PPG-poly（D-lactide） （PDL-PPG-PDL） triblock copolymers before film casting. The influences of PL end-block lengths （2 ×10^4 and 4×10^4 g/tool） and blend ratios （75/25, 50/50 and 25/75 W/W） on the stereocomplexation and mechanical properties of the blend films were evaluated. From DSC and WAXD results, the 50/50 blend films had complete stereocomplexation. Phase separation between the scPL and PPG phases was not observed from their SEM images. The tensile stress and elongation at break increased with the sterecomplex crystallinities and PL end-block lengths. The PPG middle-blocks enhanced elongation at break of the scPL films. The results showed that the PL-PPG-PL triblock structures did not affect stereocomplexation of the PLL/PDL block blending. In conclusion, the phase compatibility and flexibility of the scPL films were improved by PPG block copolymerization.展开更多
基金the National Natural Science Foundation of China(Grant No.22179044).
文摘Compared with aqueous single-ion batteries,rechargeable aqueous hybrid ion batteries,especially Li^(+)/Zn^(2+)hybrid ion batteries,are receiving extensive interest owing to their low cost,high operating voltage,and energy density.However,their working voltage and lifespan are limited by the decomposition of water and the growth of Zn dendrites.Herein,detrimental side reactions induced by the water reduction and the Zn dendrite growth are successfully suppressed by a poly(propylene glycol)(PPG)-based hybrid ion electrolyte[(1 m Zn(TFSI)2+10 m LiTFSI)in PPG/H2O].The addition of PPG in the electrolyte can not only enhance the bonding strength of hydrogen-bond in water but also tailor the solvation sheath of Zn2+as revealed by synchrotron X-rays.The participated solvation of PPG with Zn^(2+)can weaken Zn-H_(2)O interactions and redistribute Zn^(2+)flux on the surface of the Zn anode,thus inducing favorably even deposition of Zn.In addition,the decomposition of TFSI-contributes a ZnF_(2)-enriched solid electrolyte interface at the Zn anode to further prevent water decomposition and restrain Zn dendrites.The PPG-based electrolyte enables 2.1 V LiMnO_(2)//Zn batteries to deliver high specific capacities(121.7 mAh g^(-1)for a coin cell and 90 mAh g^(-1)for a pouch cell),and maintain 80%of the capacity over 700 cycles at 0.5 C,suggesting a promising pathway for highly reversible aqueous hybrid ion batteries.
文摘建立了基于聚(乙二醇-ran-丙二醇)单丁基醚(聚合物)与磷酸盐、氯化钠的双水相体系对乳清分离蛋白(WPI)中的α-乳白蛋白(α-LA)和β-乳球蛋白(β-LG)进行分离,并对其分离条件进行了优化。系统地研究了双水相体系p H值、聚合物与KH_2PO_4溶液体积比、Na Cl添加量和WPI浓度对α-LA和β-LG的分离效果的影响,采用液相色谱法对α-LA和β-LG的分离效果进行评价。结果表明,聚合物/KH2PO4双水相体系p H=4.0,40%(m/m)聚合物与15.5%(m/m)KH2PO4的体积比为4 m L∶4 m L,Na Cl添加量为0.40 g/10 m L,WPI浓度为1 mg/m L时,α-LA和β-LG分离效果最好,上相中α-LA的萃取率为98.2%,下相中β-LG的萃取率为96.6%。
基金financially supported by the Academic Development Fund of Rajabhat Maha Sarakham University(PhD scholarship for D.Pholharn)the Division of Research Facilitation and Dissemination,Mahasarakham University(2017)
文摘In the present work, poly（propylene glycol） （PPG） was block copolymerized to form polylactide-poly（propylene glycol）-polylactide （PL-PPG-PL） triblock copolymers for preparing flexible stereocomplex PL （scPL） blend films. The scPL blend films were prepared by solution blending of poly（L-lactide）-PPG-poly（L-lactide） （PLL-PPG-PLL） and poly（D-lactide）- PPG-poly（D-lactide） （PDL-PPG-PDL） triblock copolymers before film casting. The influences of PL end-block lengths （2 ×10^4 and 4×10^4 g/tool） and blend ratios （75/25, 50/50 and 25/75 W/W） on the stereocomplexation and mechanical properties of the blend films were evaluated. From DSC and WAXD results, the 50/50 blend films had complete stereocomplexation. Phase separation between the scPL and PPG phases was not observed from their SEM images. The tensile stress and elongation at break increased with the sterecomplex crystallinities and PL end-block lengths. The PPG middle-blocks enhanced elongation at break of the scPL films. The results showed that the PL-PPG-PL triblock structures did not affect stereocomplexation of the PLL/PDL block blending. In conclusion, the phase compatibility and flexibility of the scPL films were improved by PPG block copolymerization.
