Removal of rubidium from brine by an integrated film of sulfonated polysulfone/graphene/potassium copper ferricyanide

A novel integrated film of sulfonated polysulfone/graphene/potassium copper ferricyanide(KCuFC/SPSG)was used for selectively extracting rubidium ion(Rb^(+))from brine.To form KCuFC/SPSG,the precursor film of sulfonated polysulfone/graphene(SPSG)was synthesized by phase conversion process,which was alternately immersed in 0.1 mol·L^(-1)CuSO_(4)/K_(4)[Fe(CN)_(6)]by in-situ adsorption coupled co-precipitation method.Various data such as nuclear magnetic resonance spectrometer,Fourier transform infrared spectroscope,X-ray photoelectron spectroscope,X-ray diffraction,scanning electron microscope,and energy dispersive spectroscopy all verified that abundant KCuFC were uniformly located on the film.The resulting KCuFC/SPSG was used in film separation system.As the solution was fed into the system,the Rb^(+)could be selectively adsorption by KCuFC/SPSG.After the saturation adsorption,0.5 mol·L^(-1)NH_(4)Cl/HCl was fed into the film cell,Rb^(+)could be quickly desorbed by ion-exchange between Rb^(+)and NH_(4)^(+)in the lattice of KCuFC.The purpose of separating and recovering Rb^(+)from the brine can be achieved after the repeated operation.The effects of pH,adsorption time,and interferential ions on the adsorption capacity of Rb^(+)were investigated by batch experiments.The adsorption behavior fits the pseudo-second order kinetic process,while KCuFC has a higher adsorption capacity(Langmuir maximum sorption 165.4 mg·g^(-1)).In addition,KCuFC/SPSG shows excellent selectivity for Rb^(+)even in complex brine systems.KCuFC/SPSG could maintain 93.5%extraction efficiency after five adsorption/desorption cycles.

Copper-Catalyzed C-C(O)C Bond Cleavage of Monoalkylated β-Diketone: Synthesis of α,β-Unsaturated Ketones

A new and simple route for the synthesis of α,β-unsaturated ketones via cleavage of the C-C(O)C single bond of monoalkylated β-diketone has been described. The reaction was catalyzed by copper, a cheap transition metal in a weakly basic medium (K3PO4) at room temperature. To carry out this study, we first had to synthesize the monoalkylated β-diketones 1. Afterwards, α,β-unsaturated ketones 2 were obtained with high yields around 80%. Finally, all the products were characterized by 1H NMR, 13C NMR, and HRMS spectra. .

Sulfone通过转录因子Elk1调节人结肠癌细胞XAF1表达的研究

背景:Sulfone是一个高效的结肠肿瘤化学预防制剂,具有抗肿瘤功能,但其具体作用机制尚未完全明确。目的:探讨Sulfone在转录水平调节X连锁凋亡抑制蛋白(XIAP)相关因子1(XAF1)表达的作用机制。方法:以Sulfone干预人结肠癌细胞株HCT116,以蛋白质印迹法检测磷酸化ERK1/2(pERK1/2)、XAF1和ERK1/2表达;构建稳定转染pLuc-291质粒以及pLuc-291-18T、pLuc-291-70T、pLuc-291-IRFm质粒的HCT116细胞(分别为转录因子Elk1、c-ETS、IRF结合序列点突变),以荧光素酶报告基因检测Sulfone对XAF1启动子转录活性的调节作用;以染色质免疫沉淀法检测Elk1-XAF1的DNA结合活性;以实时定量PCR检测Elk1 siRNA对XAF1 mRNA表达的影响。结果:Sulfone可显著抑制pERK1/2表达,显著上调XAF1表达。XAF1启动子Elk1结合序列点突变能显著增加Sulfone诱导的XAF1启动子转录活性,而c-ETS和IRF结合序列点突变对Sulfone诱导的XAF1启动子转录活性无明显影响。XAF1启动子区域存在Elk1的特异性结合序列。以Elk1 siRNA抑制Elk1表达能显著增高XAF1mRNA表达。结论:Sulfone通过抑制ERK1/2信号通路下游转录因子Elk1活性,在转录水平上调人结肠癌细胞XAF1表达。

Sulfone通过抑制ERK途径上调XAF1表达诱导结肠癌细胞凋亡

目的:探讨化学预防药物Sulfone是否通过转录调节XAF1的表达诱导结肠癌细胞凋亡。方法:采用Hoechst 33258染色法检测人结肠癌细胞株HCT116(p53野生型)和SW480(p53突变型)经Sulfone处理后的细胞凋亡率。运用Western印迹法检测上述细胞经Sulfone处理前后XAF1、磷酸化ERK1/2(p-ERK1/2)和ERK1/2总蛋白质的表达量变化。通过双重荧光素酶报告基因检测Sulfone对XAF1启动子转录活性的调节作用。结果:Sulfone能诱导HCT116和SW480细胞凋亡,其效应随剂量的增加和时程的延长而更明显。Sulfone能有效抑制上述两种细胞中ERK1/2蛋白的磷酸化(抑制率分别为74%和57%,P<0.05),但上调XAF1蛋白的表达(2.2倍和3.1倍,P<0.05)。经Sulfone处理后,XAF1启动子的转录活性在HCT116和SW480细胞分别提高了3.3倍(P<0.01)和2.6倍(P<0.05)。结论:Sulfone通过抑制ERK途径,在转录水平显著上调XAF1的表达进而诱导细胞凋亡,且这种作用的强弱与肿瘤细胞的p53分型有关。

Synthesis and characterization of quaternized poly(phthalazinone ether sulfone ketone)for anion-exchange membrane

Chloromethylated poly（phthalazinone ether sulfone ketone） （CMPPESK） was prepared from poly（phthalazinone ether sulfone ketone） （PPESK） using chloromethyl octyl ethers （CMOE） with lower toxicity as chloromethylated regent. CMPPESK was soluble in N-methyl-2-pyrrolidone （NMP）, N,N-dimethylacetamide （DMAc） and chloroform. Quaternized poly（phthalazinone ether sulfone ketone） （QAPPESK） was prepared from CMPPESK by quaternization. QAPPESK had excellent solvent resistance, which was only partly soluble in sulfuric acid （98%） and swollen in N,N-dimethylformamide （DMF）. The vanadium redox flow battery （V-RFB） using QAPPESK anion-exchange membrane had better performance with 88.3% of overall energy efficiency.

Improvement of HydrophUicity and Blood Compatibility on Polyethersulfone Membrane by Blending Sulfonated Polyethersulfone

Polyethersulfone(PES) is widely used as biomaterials due to its thermal stability,mechanical strength,and chemical inertness.Nevertheless,their blood compatibility is still not adequate for hemodialysis and blood purification.In this study,the sulfonated polyethersulfone(SPES) was synthesized through an electrophilic substitution reaction,and PES/SPES blending membranes were prepared.The characterization of the SPES was studied by FTIR.The water adsorption and water contact angle experiments show that the hydrophilicity of PES/SPES blend membrane was improved as for the sulfonate group existing in the SPES.Moreover,PES/SPES blend membrane could effectively reduce bovine serum albumin adsorption and prolong the blood coagulation time compared with the PES membrane,thereby improving blood compatibility.

Synthesis and characterization of novel poly(aryl ether sulfone ketone)s containing phthalazinone and biphenyl moieties

A novel series of poly（aryl ether sulfone ketone）s （PPESKs） containing phthalazinone and biphenyl moieties were prepared by two-step nucleophilic polycondensation reaction. The ^-Mw values of these copolymers were between 38,330 and 67,900. The glass transition temperatures （Tg） and 5% decomposition temperatures were ranged in 253-269 ℃ and 488-500 ℃, respectively, The structures of these copolymers were confirmed by FT-IR and ^1H NMR. Moreover, all the resultant copolymers were amorphous determined by wide angle X-ray diffraction （WAXD）.

Allyl-containing Poly(aryl ether sulfone): Synthesis and Crosslinking

A novel type of crosslinkable poly（aryl ether sulfone）（PAES） bearing an allyl pendant（PES-OAllyl） was synthesized by a grafting reaction of hydrophenyl-containing PAES（PES-OH） and allyl bromide. PES-OH was prepared by a demethylation reaction of a methoxyphenylated PAES（PES-OCH3） in the presence of pyridine/hydrochlo- ride. The PES-OCH3 was synthesized by an aromatic nucleophilic substitution of bis（4-chlorophenyl）sulfone and （p-methoxy）phenylhydroquinone. Both DSC and solubility investigation were used to study the crosslinking behavior of PES-OAllyl. After heat treatment, the glass transition temperature（Tg） value of PES-OAllyl sharply increased from 165 ℃ to 227 ℃. Meanwhile, PES-OAllyl changed from a soluble polymer to an insoluble thermoset. In addition, TGA（thermogravimetric analysis） result suggests that the thermal stability of the crosslinked product was improved. All the data prove that the crosslinked PES-OAllyl could be a potential solvent-resistance high-performance material.

THERMAL DEGRADATION OF POLY(ARYLENE SULFIDE SULFONE)/NMETHYLPYRROLIDONE CRYSTAL SOLVATE

The thermal degradation of poly（arylene sulfide sulfone）/N-methylpyrrolidone （PASS/NMP） crystal solvate was studied by thermogravimetric analysis （TGA） and was compared with pure PASS in order to determine the way in which the formation of the crystal solvate affected the thermal properties of the polymer. The activation energy of the solid state process was determined using Kissinger＇s method, which does not require knowledge of the reaction mechanism （RM）, to be 174.18 kJ/mol which was lower than that for pure PASS （E = 214 kJ/mol）. The study of master curves together with interpretation of integral methods, allows confirmation that the thermal degradation mechanism for PASS in the crystal solvate system is a decelerated Rn type, which is a solid-state process based on a phase boundary controlled reaction, in the conversion range considered. Whereas, the pure PASS follows a decelerated Dn thermodegradation mechanism in the same conversion range.

Proton-exchange Sulfonated Poly（ether ether ketone）/Sulfonated Phenolphthalein Poly（ether sulfone） Blend Membranes in DMFCs

A sulfonated poly（ether ether ketone） （SPEEK） membrane with fairly high degree of sulfonation （DS） swells excessively and even dissolves at high temperature. To solve these problems, sulfonated phenolphthalein poly（ether sulfone） （SPES-C, DS= 53.7%） is blended with the SPEEK matrix （DS= 55.1%, 61.7%） to prepare SPEEKJSPES-C blend membrane. The decrease in swelling degree and methanol permeability of the membrane is dose-dependent. Pure SPEEK （DS = 61.7%） membrane dissolves completely in water at 70℃, whereas the swelling degree of the SPEEK （DS = 61.7%）/SPES-C （40%, by mass） membrane is 29.7% at 80℃. From room temperature to 80℃, the methanol permeability of all SPEEK （DS = 55.1%）/SPES-C blend membranes is about one order of magnitude lower than that of Nafion 115. At higher temperature, the addition of SPES-C polymer increases the dimensional stability and greater proton conductivity can be achieved. The SPEEK （DS = 55.1%）/SPES-C （40%, by mass） membrane can withstand temperatures up to 150℃. The proton conductivity of SPEEK （DS = 55.1%）/SPES-C （30%, by mass） membrane approaches 0.16 S·cm^-1, matching that of Nafion 115 at 140℃ and 100% RH, while pure SPEEK （DS = 55.1%） membrane dissolves at 90℃. The SPEEK/SPES-C blend membranes are promising for use in direct methanol fuel cells because of their good dimensional stability, high proton conductivity, and low methanol permeability.

Corrosion inhibition of α,β-unsaturated carbonyl compounds on steel in acid medium

Corrosion inhibition of three α,β-unsaturated carbonyl compounds on N80 steel at high temperature and in concentrated acid medium was evaluated, and the inhibition mechanism was investigated. The results proved that both cinnamaldehyde and benzalacetone had an evident anticorrosion effect and could reduce the corrosion of steel effectively in acid medium, α,β-unsaturated carbonyl compounds with a benzene ring structure had good adsorption on steel surface. The experiments proved that polymerization of α,β-unsaturated carbonyl compounds on the steel surface at a high temperature and in concentrated acid medium resulted in a good corrosion inhibiting effect, which was attributed to the structures of α,β-unsaturated carbonyl compounds.

Synthesis and Characterization of Ion-exchange Sulfonated Poly (ether sulfone)

N,N＇-Bis（3-hydroxyphenyl）-1,8,4,5-naphthalenetetracarboxylic bisimide was prepared from the reaction of 1,8,4,5-naphthalenetetrcarboxylic acid dianhydride and 2-aminophenol in N, N-dimethylformamide. Polymerization of this bisimide with 4,4＇-difluorodiphenylsulfone and disodium 3,3＇-disulfonate4,4＇-difluorodiphenylsulfone gave ion-exchange sulfonated poly（ether sulfone）. The structure of the title compound was characterized with H-NMR and its polymer was characterized with FT-IR.

Gallium trichloride-catalyzed conjugate addition of indole and pyrrole to α,β-unsaturated ketones in aqueous media

Michael addition of indole and pyrrole to a variety of α, β-unsaturated ketones was efficiently promoted by a catalytic amount of GaCl3 in aqueous media to afford the corresponding products in good to excellent yields.

Cyclic Oligomers of Phenolphthalein Polyarylene Ether Sulfone (Ketone): Preparation Through Cyclo-depolymerisation of Corresponding Polymers

Cyclic oligomers of phenolphthalein polyarylene ether sulfone(ketone) were prepared through cyclo-depolymerisation of corresponding polymers using CsF as the catalyst in dipolar aprotic solvent DMAc and DMF, and a family of macrocycles containing from dimer up to at least heptamer were confirmed by GPC, HPLC and MALDI-TOF-MS. The yields of cyclics get as high as 86.3% and 87.9% respectively.

Synthesis of α,β-Unsaturated Ketones using Potassium fluoridealumina Catalyst by Microwave Irradiation

Microwave irradiation can accelerate the rate of the synthetic reaction of α,β-unsaturated ketones by using KF-Al2O3 as catalyst. The rate enhancement of the reaction is 360-860 fold.

Two new α,β-unsaturated butyrolactone derivatives from Pleione bulbocodioides

Two new α,β-unsaturated butyrolactone derivatives, 4-(4″-hydroxybenzyl)-3-(3′-hydroxy-phenethyl)furan-2(5H)-one (1) and 3-(3′-hydroxyphenethyl)furan-2(5H)-one (2), together with one known phenolic compound (3), were isolated from the tubers of Pleione bulbocodioides (Franch.) Rolfe. Their structures were elucidated by analysis of spectroscopic data.

Nickel (Ⅱ) Complex Catalyzed Conjugate Addition Reaction of Functionalised Organozinc Reagents to α,β -Unsaturated Esters

Functionalized organozinc reagents can easily under 1, 4-addition reaction withunsaturated esters in the presence of catalytic amount of Ni (acac)_2 and tertiary ammes under verymild conditions to give the products in excellent yields.

A novel method for the management of sulfone-rich waste produced in the oxidative desulfurization(ODS) process

The oxidative desulfurization(ODS) process is one of the new desulfurization processes for the production of clean fuels. Despite the benefits of the ODS process, this process faces several important challenges. One of the most important challenges of this process is the management of a waste which is rich of sulfone compounds.In the present study, a new strategy which is the addition of waste to the bitumen with other solid waste such as high density polyethylene(HDPE) waste has been investigated. The experimental design method was applied to investigate the effect of addition of the sulfone and HDPE wastes to the properties of the bitumen blends including degree of penetration, softening point, and mass loss. It was found that the sulfone waste can be added to the bitumen as a softener. The results showed that several grades of bitumen including 50/60, 60/70, 85/100 can be produced through the addition of sulfone waste along with the HDPE waste to the base 60/70 bitumen.In general, the application of simple processes such as mixing the wastes with the bitumen can reduce the cost of waste management, considerably.

Synthesis and properties of soluble poly（aryl ether sulfone ether ketone）s copolymers containing pendant methyl groups

A series of Poly（arly ether sulfone ether ketone）s containing pendant methyl groups were synthesized by the reaction of 4,4＇-[sulfonylbis （1,4-phenylene）dioxy] dibenzoyl chloride （SODBC） with 4,4＇- diphenoxy diphenylsulfone （DPODPS）, 4,4＇- di（2-methylphenoxy） diphenylsulfone （o-Me-DPODPS）, 4,4＇- di（3-methylphenoxy） diphenylsulfone （m-Me-DPODPS）, 4,4＇- di （2,6-bimethylphenoxy） biphenylsulfone（o-Me2-DPODPS） respectively, in a mixture of 1,2-dichloroethane （DCE） and N-methylpyrrolidone （NMP）. These reactions were catalyzed by anhydrous aluminum chloride （AlCl）. The characteristic of copolymers were studied by means of advanced analytical techniques such as FT-IR,1H-NMR, DSC, TGA and WAXD. The results show glass transition temperature （Tg） in the range of 193-206℃, thermally stable in excess of 434℃ and excellent solubility in polar solvents. Methyl-substituted Poly（aryl ether sulfone ketone）s had higher glass transition temperatures, lower initial decomposition temperatures than the unsubstituted ones.