Epoxidation of Unsaturated Fatty Acid Methyl Esters in the Presence of SO_3H-functional Brφnsted Acidic Ionic Liquid as Catalyst

The epoxidation of unsaturated fatty acid methyl esters(FAMEs)by peroxyacetic acid generated in situ from hydrogen peroxide and acetic acid was studied in the presence of SO3H-functional Brnsted acidic ionic liquid (IL)[C3SO3HMIM][HSO4]as catalyst.The effects of hydrogen peroxide/ethylenic unsaturation ratio,acetic acid concentration,IL concentration,recycling of the IL catalyst,and temperature on the conversion to oxirane were studied.The kinetics and thermodynamics of unsaturated FAMEs epoxidation and the kinetics of oxirane cleavage of the epoxidized FAMEs by acetic acid were also studied.The conversion of ethylenic unsaturation group to oxirane, the reaction rate of the conversion to oxirane,and the rate of hydrolysis(oxirane cleavage)were higher by using the IL catalyst.

Boosted Biodegradability and Tribological Properties of Mineral Base Oil by Methyl Diethanolamine Fatty Acid Esters

Methyl diethanolamine fatty acid esters, viz. methyl diethanolamine octanoate and methyl diethanolamine oleate,were prepared. Their impacts on the biodegradability and tribological properties of mineral base oil 400 SN were evaluated by a tester for fast evaluating the biodegradability of lubricants and by a four-ball tester, respectively. The results showed that methyl diethanolamine octanoate and methyl diethanolamine oleate both could markedly promote the biodegradation of the oil and improved its tribological properties. The improvement of biodegradability was attributed to the enhanced growth and quantity of microbes by methyl diethanolamine fatty acid esters. The worn surfaces were analyzed by a scanning electron microscope(SEM) equipped with an energy dispersive spectrometer(EDS) and an X-ray photoelectron spectroscope(XPS). The results indicated that the enhancement of friction-reducing and anti-wear properties of the mineral oil was attributed to the formation of complicated boundary lubrication films composed of species such as Fe_2O_3, Fe_3O_4 and organic nitrogen-containing compounds with a structure of –C-N-or R-NH_2.

Effects of Yttrium Doping on the Performance of Ru-Based Catalysts for Hydrogenation of Fatty Acid Methyl Ester

The highly dispersed supported ruthenium-yttrium (Ru-Y) bimetallic catalysts were prepared by impregnation method and their catalytic performance for hydrogenation of ester was fully investigated. The catalyst was characterized by X-ray diffraction and field emission scanning electron microscopy. The results show that the average particle diameter of the bimetallic crystallites was less than 10 nm. The effects of the reaction temperature, the hydrogen pressure, the amount of catalyst and the proportion of yttrium in catalyst on the hydrogenation of ester were studied. The experimental results show that the introduction of yttrium not only changed the chemical and textural properties of ruthenium-based catalyst but also controlled the formation of Ru-Y alloy. The Ru-Y catalyst (Ru-2%Y/TiO2) exhibited high catalytic activity and good selectivity towards the higher alcohols. Under optimal reaction conditions of 240°C and 5 MPa hydrogen pressure, the conversion of palm oil esters was above 93.4% while the selectivity towards alcohol was above 99.0%.

Ternary Liquid-Liquid Equilibrium for Systems of Fatty Acid Methyl Ester(Methyl Palmitate/Methyl Stearate)+Ethanol+Glycerol at Atmospheric Pressure

Liquid-liquid equilibrium data of two ternary systems methyl palmitate+ethanol+glycerol and methyl stearate+ethanol+glycerol at(318.2 and 333.2)K and atmospheric pressure were measured. The values of distribution coefficient and selectivity were calculated, which indicates that glycerol can be separated from fatty acid ester by using ethanol as an extraction solvent. The consistency of the isothermal tie-line data were checked by the Othmer-Tobias equation. The correlation coefficients R2 are higher than 0.993,9 for all the fitted curves. The NRTL activity coefficient model was applied to the correlation of the measured tie-line data. The root mean square deviation(RMSD)values are less than 0.007 for all the systems, which shows a good predictive capability of this model for such systems.

Determination of the Fatty Acid Profile of Breast Milk from Nursing Mothers in Bungoma County, Kenya

The fatty acid profile in breast milk of nursing mothers who participated in a Cohort for Vitamin A (COVA) study at the fourth and ninth month of lactation was investigated. Breast milk samples were collected by manual expression and stored at - 20°C until analysis. The fat was extracted from the milk and methylated using the American Oil Chemists’ Society (AOCS) Official Methods with modifications. The separation, identification and quantification of the fatty acid methyl esters was performed by gas chromatography coupled with mass spectrometry (GC-MS). Fat contents of human milk increased significantly between the fourth and ninth month of lactation 0.38 and 1.21 mg·mL-1 respectively;P 0.05) than the average percent of the total unsaturated FAs (48.93%). Similarly, at the 9th month the percentage average of the total saturated fatty acids (15.18%) was significantly lower (P < 0.05) than the average percent of the total unsaturated FAs (31.05%). The results obtained in this study demonstrated that the fat content in breast milk significantly increased in the 9th compared to the 4th month of lactation. The fatty profile was also significantly different with the omega 6 being the dominant at the 9th month compared with the omega - 9 being dominant at the 4th month of lactation.

Production of biodiesel from palm fatty acid distillate using sulfonated-glucose solid acid catalyst:Characterization and optimization

A palm fatty acid distillate （PFAD） has been used for biodiesel production. An efficient sulfonated-glucose acid catalyst （SGAC） was prepared by sulfonation to catalyze the esterification reaction. The effect of three variables i.e. methanol-to-PFAD molar ratio, catalyst amount and reaction time, on the yield of PFAD esters was studied by the response surface methodology （RSM）. The optimum reaction conditions were： 12.2：1 methanol-to- PFAD molar ratio, 2.9% catalyst concentration and 134 rain of time as predicted by the RSM. The reaction under the optimum conditions resulted in 94.5% of the free fatty acid （FFA） conversion with 92.4% of the FAME yield. The properties of the PFAD esters were determined according to biodiesel standards.

NiMoRe/HZSM-5催化剂的制备及其催化脂肪酸甲酯加氢脱氧

使用浸渍法制备了5 kg NiMoRe/HZSM-5催化剂,结合X射线衍射(XRD)、扫描电子显微镜(SEM)、电感耦合等离子原子发射光谱(ICP-OES)等表征手段对催化剂进行理化性质分析,并对该催化剂用于硬脂酸甲酯加氢脱氧反应的最佳条件进行探究。研究结果表明:相比3种商用催化剂,NiMoRe/HZSM-5中金属Ni具有较小颗粒,且分散均匀,BET比表面积(S_(BET))更大,为239.1 m^(2)/g,具有更好的催化活性。在温度260℃、0.3 g催化剂用量、反应时间4 h、初始H 2压力3 MPa的最优反应条件下,原料转化率和烷烃选择性均为100%,且催化剂稳定性较佳,第5次循环原料转化率仍高达96.1%,加氢脱氧(HDO)反应的选择性(S HDO/DCO),即HDO反应与脱羧脱羰(DCO)反应的比值由1.2降至0.56。将催化剂NiMoRe/HZSM-5用于脂肪酸甲酯无溶剂条件下的加氢脱氧反应放大实验后进行中试,采用2.8 L固定床对25 kg脂肪酸甲酯进行连续加氢性能评价,经过15循环后脂肪酸甲酯的转化率达到98%。

丙磺酸型碗状碳微球制备及在餐厨废油酯交换反应中的性能研究

以碗状碳微球(BHC)为载体,合成了以烷基为磺酸基键合位点的丙磺酸型碗状碳微球(PA-CBHC-Si)。X射线光电子能谱仪、扫描电子显微镜和傅里叶变换红外光谱分析表明,三步改性分别逐步丰富BHC表面羧基(—COOH)、巯基(—SH)、磺酸基(—SO_(3)H)官能团含量,且改性过程保留了载体的原始形貌。PA-CBHC-Si的酸密度高达8.5mmol/g,活性中心—SO_(3)H于300℃开始分解,具有良好的热稳定性。PA-CBHC-Si可作为煎炸废油与甲醇酯交换反应的催化剂,醇油摩尔比为16∶1,剂油比为0.02的催化体系于130℃反应4h,脂肪酸甲酯产率为84.53%。

气相色谱-氢火焰离子化测定脂肪酸甲酯的响应机理与定量规律

针对国内外现行标准中气相色谱-氢火焰离子化检测器(gas chromatography-flame ionization detector,GCFID)测定脂肪酸甲酯(fatty acid methyl esters,FAME)定量方法的不足,本实验通过理论推导和实验验证,从仪器、色谱柱、分流比、标准物质方面系统研究利用GC-FID分析37种FAME的响应规律、理论模型及实验干扰因素,提出“质量系数”和“关联因子”概念,揭示实验关联因子(experimental relevance factors,FF_(E))和理论关联因子(theoretical relevance factors,FF_(T))的函数关系和等值性条件,并经多个实验证实了关联因子的稳定性,发现当脂肪酸碳数大于10时,可充分利用理论质量系数(theoretical quality coefficient,QC_(T))和FFT对FAME进行相对或绝对定量;当脂肪酸碳数小于10时,可以通过现配FAME标准物质等方法精确测定实验质量系数(experimental quality coefficient,QC_(E))和实验关联因子FFE,并用此校正FAME的量进行定量,不仅能够提高定量结果的准确性,而且能够增加标准物质的使用时效以及节省标准物质的使用量。

固相萃取-气相色谱-串联质谱技术测定船用残渣燃料油中酚类及脂肪酸甲酯类化合物

本文利用乙酸银修饰的氧化铝-硅胶材料制备固相萃取柱对船用残渣燃料油样品进行净化分离,结合气相色谱-串联质谱技术,使用DB-35 MS UI色谱柱分离,多反应监控模式,内标法定量测定酚类及脂肪酸甲酯(FAME)类化合物。对影响酚类和FAME类化合物的进样方式、萃取溶剂的选择、固相萃取柱类型的选择以及淋洗和洗脱条件进行了优化,建立了船用残渣燃料油中酚类及FAME类化合物的测定方法。方法在浓度0.05~2.5μg/mL范围线性良好,具有检出限(0.1~1.2 mg/kg)和定量限(0.3~4.0 mg/kg)低,稳定性好和萃取效率高,以及基质效应不显著等优势。通过用不含目标物的空白燃料油配制0.10、0.50、2.50 mg/L浓度水平的试样考察方法的可靠性,获得满意的回收率(85.5%~115.4%)和相对标准偏差(RSD≤6.2%)。实验结果表明,建立的方法可实现船用残渣燃料油中酚类及FAME类化合物的有效检测。另外,劣质船用燃油存在不少的酚类和FAME类物质,高浓度苯酚、甲酚、二甲酚、对枯基苯酚、脂肪酸甲酯等物质可能是导致船舶油泵损坏的重要原因。

蛋白核小球藻原位催化制备生物柴油的研究

化石燃料是全球能源供应的主要来源,在过去的几十年里,由于人口和能源需求的增加,导致能源消耗和CO_(2)排放量迅速增加,加剧了全球气候变化。利用生长迅速、含油量高、对环境友好的蛋白核小球藻(Chlorella pyrenoidosa)催化转化生物柴油具有很大发展潜力,可以实现“碳中和”及可持续发展。传统的两步酯交换法制备生物柴油在经济环境上是不可行的,脱水干燥和脂质提取过程消耗了大量能源和成本,采用“一步”原位酯交换方法替代传统的两步酯交换将微藻转化为低成本高附加值产品,可以实现高生物柴油产率及高C16、C18脂肪酸甲酯组分含量,产生高质量的生物柴油,具有生态和经济效益。

常用植物油中棉籽油掺假鉴别研究

目的:建立气相色谱-质谱法鉴别植物油中掺假棉籽油。方法:样品经由氢氧化钠-甲醇溶液甲酯化,经离心过滤后由气相色谱-质谱法测定。结果:检出限和定量限分别为0.775 μg·g^(-1)和2.557 μg·g^(-1),回收率在92.55%~94.67%;大豆油、葵花籽油、菜籽油、芝麻油的最低鉴别掺假比例为3%(质量比),花生油最低鉴别掺假比例为15%(质量比)。结论:该方法快速、简便,适用于植物油中棉籽油掺假的鉴别。

溶剂分离法提取生物柴油中的不饱和脂肪酸甲酯

为了降低生物柴油的冷凝点,采用溶剂分离法提取生物柴油中的不饱和脂肪酸甲酯,重点考察了醇的种类、溶剂的用量、冷冻温度和过滤方式对分离效果的影响。结果表明:乙醇的用量为原料质量的2~3倍,冷冻温度-15℃,压滤法过滤,最高可得到96.9575%的不饱和脂肪酸甲酯含量和86.92%的得率。

Ethanol Evaporation Characteristics of the Blends of Fatty Acid Methyl Ester and Ethanol

The evaporation characteristics of fatty acid methyl ester(FAME)mixed with four concentrations of ethanol at 873 K and normal atmospheric pressure are studied herein.FAME is used as base oils,and et hanol mass fractions vary from 10%,20%,30%to 40%。The experimental results show that the evaporation process of the binary component droplets of FAME-ethanol can be divided into two stages:a fuctuation evaporation stage,and an equilibrium evaporation stage.In these four concentration gradients,micro-explosions occur in the droplet evaporation process.The fuctuation evaporation stage is divided into two stages:a strong fuctuation stage and a weak fluctuation stage.After the micro-explosion,there is still a small amount of ethanol in the droplet.Due to the surface tension of the droplet,a small amount of ethanol cannot make the droplet violently fuctuate.The results show that the earlier the droplet micro-explosion occurs,the more intense it is,and the shorter the lifetime of the droplet is.Different concentrations of ethanol have different improvements in droplet evaporation characteristics.Generally,the higher the ethanol concentration is,the shorter the lifetime of the droplet is.However,increasing the ethanol concentration from 20%to 30%has the most obvious effect on the lifetime of the droplet.

In Situ Transesterification of Wet Marine and Fresh Water Microalgae for Biodiesel Production and Its Effect on the Algal Residue

This article reports a high yielding technique of synthesizing zirconium dodecyl sulphate (“ZDS”) for in situ transesterification of Nannochloropsis occulata and Chlorella vulgaris for fatty acid methyl ester (FAME) production. ZDS produced a significantly higher FAME yield in N. occulata than in C. vulgaris (p = 0.008). The varying performance of ZDS in the two species could be due to their different cell wall chemistries. Sodium dodecyl sulphate (SDS) in H2SO4 for FAME enhancement from the two species was also studied. Treatment with SDS in H2SO4 increased the FAME production rate in both species. Residual protein content after the in situ transesterification in C. vulgaris and N. occulata reduced respectively by 6.5% and 10%. The carbohydrate content was reduced by 71% in C. vulgaris and 65% in N. occulata. The water tolerance of the process when using H2SO4, with or without SDS, was evaluated by hydrating the two species with 10% - 30% distilled water (w/w dry algae). The FAME concentration began to diminish only at 30% water content in both species. Furthermore, the presence of a small amount of water in the biomass or methanol increased the lipid extraction efficiency, improving the FAME yield, rather than inhibiting the reaction.

掺混纳米粒子对脂肪酸甲酯乙醇混合燃油的蒸发及微爆特性的影响

通过添加脂肪酸甲酯和乙醇的混合物,研究了不同浓度的Fe_(3)O_(4)纳米颗粒(0.05%,0.5%,1%,2%)的蒸发过程.在正常重力条件下,分析比较了纳米流体液滴在773K和873 K两种温度下的蒸发特性,并与脂肪酸甲酯和乙醇二元混合物的蒸发特性进行了比较.结果表明,纳米流体燃料受环境因素的影响很大,在773 K和873 K环境温度下的瞬态加热阶段,燃料发生了明显的微爆炸,平衡蒸发阶段遵循d^(2)定律.在873 K的环境温度下,低浓度的纳米粒子会缩短液滴燃料的寿命,高浓度的纳米粒子容易剧烈运动而累积成核,并最终在液滴的表面形成多空的球形壳,抑制了液滴的蒸发.在773 K的环境温度下,高浓度的纳米粒子从环境温度吸收大量热量,从而加速了液滴的蒸发.

磺酸型中空多孔碳微球基固体酸催化煎炸废油的酯交换反应

以中空多孔碳微球(HPCMs)为载体,依次经过酰胺化、H_(2)O_(2)氧化和氯磺酸磺化后制得磺酸型中空多孔碳微球基固体酸(SHPCMs)催化剂,借助SEM、TEM、氮气物理吸脱附、XPS、TG和boehm滴定法等对催化剂的理化性质进行了表征.结果表明,该催化剂具有中空多孔结构,表面成功接枝磺酸基团,表面酸量为13.0 mmol/g,比表面积为11.5 m^(2)/g,平均孔径为4.39 nm,在酯交换反应中表现出良好的催化性能,在最佳反应条件下(反应温度120℃、反应时间7 h、醇油物质的量之比16∶1),脂肪酸甲酯的产率为98.60%.

低泡沫环氧丙烷封端脂肪酸甲酯乙氧基化物在铝材低温除油中的应用

以环氧丙烷(PO)封端脂肪酸甲酯乙氧基化物(FMEE)为主成分,TX-10为乳化剂,乙二胺二邻苯基乙酸钠(EDDHA-Na)为螯合剂,伯烷基磺酸钠(PAS-80)为渗透剂,获得适用于铝材的低温乳化、除灰、防回沾三种性能均衡的除油剂。通过正交试验确定了PO封端FMEE、TX-10、PAS-80、EDDHA-Na的较佳质量比为3∶2∶1∶1。将30g/L该除油剂与10g/L硫酸复配使用时,不仅可获得良好的除油效果,还能降低硫酸的使用量。

磺酸型固体酸的制备及其催化油脂合成脂肪酸甲酯的研究进展

主要阐述了制备磺酸型固体酸的方法,重点分析以不同材料为载体的磺酸型固体酸在催化合成脂肪酸甲酯中的应用和性能,旨在为磺酸型固体酸的合成及高效利用提供参考。

芝麻酚与季铵盐共催化环加成反应合成植物油基环状碳酸酯

旨在为植物油基环状碳酸酯产品的制备提供新的研究思路,以环氧大豆油脂肪酸甲酯和二氧化碳为原料,在催化剂季铵盐和氢键供体的作用下,合成植物油基环状碳酸酯。通过单因素实验对植物油基环状碳酸酯的合成条件进行优化,对反应动力学进行了分析,同时对产物植物油基环状碳酸酯进行了红外表征。结果表明:植物油基环状碳酸酯最佳合成条件为以芝麻酚为氢键供体、四丁基溴化铵与芝麻酚物质的量比2∶1、四丁基溴化铵用量10%(以原料环氧键物质的量计)、反应温度120℃、反应压力1.0 MPa、反应时间10 h,在此条件下植物油基环状碳酸酯的产率达91.4%;反应动力学分析表明,芝麻酚的加入降低了反应的活化能,有利于植物油基环状碳酸酯的合成;红外光谱表征结果证明成功合成了产物。综上,实现了无溶剂条件下高效合成植物油基环状碳酸酯。