期刊文献+
共找到2篇文章
< 1 >
每页显示 20 50 100
Effect of double aging on mechanical properties and microstructure of EV31A alloy 被引量:7
1
作者 Kan GU Xiao-qin ZENG +1 位作者 Bin CHEN Ying-xin WANG 《Transactions of Nonferrous Metals Society of China》 SCIE EI CAS CSCD 2021年第9期2606-2614,共9页
To improve the ductility of a commercial Mg−rare earth alloy EV31A(Mg−3Nd−1.5Gd−0.3Zn−0.5Zr),a heat treatment method called double aging is explored,and its effect on mechanical properties and microstructure of the al... To improve the ductility of a commercial Mg−rare earth alloy EV31A(Mg−3Nd−1.5Gd−0.3Zn−0.5Zr),a heat treatment method called double aging is explored,and its effect on mechanical properties and microstructure of the alloy is studied.Ultimate strength and elongation of the alloy can be increased to 288 MPa and 6.6%by the optimum double aging process,compared to 273 MPa and 4.9%after single aging.Time consumption of the aging process is also significantly decreased from 16 h(single aging)to 2 h.HAADF-STEM characterization shows that the primary precipitate isβ'phase,which is similar toβ'phase in Mg−Nd binary alloy.By double aging,theβ'phase is finer and more densely distributed compared with single aging,with approximately double density and half size,which explains the improvement in strength and ductility. 展开更多
关键词 magnesium alloy EV31A double aging mechanical properties β'phase
下载PDF
热挤压态Mg-10Gd-4Y-0.5Zr合金的时效析出
2
作者 张小翠 《锻压技术》 CAS CSCD 北大核心 2024年第2期241-246,共6页
为提高热挤压态Mg-10Gd-4Y-0.5Zr合金的力学性能,并获得该合金的最佳时效工艺参数,以热挤压态Mg-10Gd-4Y-0.5Zr合金为研究对象,探究了在200℃时效温度下不同时效时间对其硬度和析出相的影响规律。结果表明:在等温时效过程中,随着时效时... 为提高热挤压态Mg-10Gd-4Y-0.5Zr合金的力学性能,并获得该合金的最佳时效工艺参数,以热挤压态Mg-10Gd-4Y-0.5Zr合金为研究对象,探究了在200℃时效温度下不同时效时间对其硬度和析出相的影响规律。结果表明:在等温时效过程中,随着时效时间的延长,合金的硬度先降低再逐渐增大,在96 h时达到峰值后又逐渐下降;当时效6 h后,晶粒内残存大量位错线,晶粒内生成少量尺寸较小的β′相,此时为欠时效态;随着时效时间的延长,β′相沿着<1010>方向逐渐扩展长大,数量逐渐增多;当时效96 h后,β′相的密度达到最大,并逐渐连接,此时为峰值时效态;当时效120 h后,在晶界处生成尺寸大约为88 nm×237 nm的椭圆状β相,此时为过时效态。 展开更多
关键词 Mg-10Gd-4Y-0.5Zr合金 热挤压 β′相 Β相 时效时间
原文传递
上一页 1 下一页 到第
使用帮助 返回顶部