The structure-directing role of heterologous seeds in the synthesis of zeolite

Zeolites have been widely used as catalysts,ion-exchangers,and adsorbents in chemical industries,detergent industry,steel industry,glass industry,ceramic industry,medical and healthfield,and environmentalfield,and recently applied in energy storage.Seed-assisted synthesis is a very effective approach in promoting the crystallization of zeolites.In some cases,the target zeolite cannot be formed in the absence of seed zeolite.In homologous seed-assisted synthesis,the structure of the seed zeolite is the same to that of the target zeolite,while the structure of the seed zeolite is different to that of the target zeolite in the heterologous seed-assisted synthesis.In this review,we briefly summarized the heterologous seed-assisted syntheses of zeolites and analyzed the structure-directing effect of heterologous seeds and surveyed the“common composite building units(CBUs)hypothesis”and the“common secondary building units(SBUs)hypothesis”.However,both hypotheses cannot explain all observations on the heterologous seed-assisted syntheses.Finally,we proposed that the formation of the target zeolite does need nuclei with the structure of target zeolite and the formation of the nuclei of the target zeolite can be promoted by either the undissolved seed crystals with the same CBUs or SBUs to the target zeolite or by the facilitated appropriate distribution of the specific building units due to the presence of the heterologous seed that does not have any common CBUs and SBUs with the target zeolite.

Dealuminated Hβ zeolite for selective conversion of fructose to furfural and formic acid

The fructose-to-furfural transformation is facing major challenges in the selectivity and high efficiency. Herein, we have developed a simple and effective approach for the selective conversion of fructose to furfural using Hβ zeolite modified by organic acids for dealuminization to regulate its textural and acidic properties. It was found that citric acid-dealuminized Hβ zeolite possessed high specific surface areas, wide channels and high Brønsted acid amount, which facilitated the selective conversion of fructose to furfural with a maximum yield of 76.2% at433 K for 1 h in the γ-butyrolactone(GBL)-H_(2)O system, as well as the concomitant formation of 83.0% formic acid. The^(13)C-isotope labelling experiments and the mechanism revealed that the selective cleavage of C1–C2 or C5–C6 bond on fructose was firstly occurred to form pentose or C5 intermediate by weak Brønsted acid, which was then dehydrated to furfural by strong Brønsted acid. Also this dealuminized Hβ catalyst showed the great recycling performance and was active for the conversion of glucose and mannose.

Synthesis of spherical nano-ZSM-5 zeolite with intergranular mesoporous for alkylation of ethylbenzene with ethanol to produce m-diethylbenzene

Catalytic synthesis of m-diethylbenzene(m-DEB)through alkylation of ethylbenzene(EB)may be a promising alternative route in comparison with traditional rectification of mixed DEB,for which the top priority is to develop efficient and stable heterogeneous catalysts.Here,the spherical nano-ZSM-5 zeolite with abundant intergranular mesoporous is synthesized by the seed-mediated growth method for alkylation of EB with ethanol to produce m-DEB.The results show that the spherical nano-ZSM-5 zeolite exhibits better stability and higher alkylation activity at a lower temperature than those of commercial micropore ZSM-5.And then,the spherical nano-ZSM-5 is further modified by La_(2)O_(3) through acid treatment followed by immersion method.The acid treatment causes nano-ZSM-5 to exhibit the increased pore size but decreased the acid sites,and subsequent La_(2)O_(3) loading reintroduces the weak acid sites.As a result,the HNO_(3)-La_(2)O_(3)-modified catalyst exhibits a slight increase in EB conversion and DEB yield in comparison with unmodified one,and meanwhile,it still maintains high m-DEB selectivity.The catalyst after acid treatment achieves higher catalytic stability besides maintaining the high alkylation activity of EB with ethanol.The present study on the spherical nano-HZSM-5 zeolite and its modification catalyst with excellent alkylation ability provides new insights into the production of mDEB.

EDTA-LDH/zeolite制备及其对重金属离子的吸附

用水热法和焙烧还原法两步合成了乙二胺四乙酸-水滑石/沸石(EDTA-LDH/zeolite)复合材料,并将其用于去除水溶液中的Cd^(2+)、Pb^(2+)、Cu^(2+),系统研究不同条件下EDTA-LDH/zeolite对单一及混合重金属离子溶液中Cd^(2+)、Pb^(2+)、Cu^(2+)的吸附效果与吸附机制。结果表明,当EDTA-LDH/zeolite投加量为0.05 g、重金属离子浓度为1500 mg/L、pH值为6.5、吸附时间为24 h时,EDTA-LDH/zeolite吸附性能最佳。重金属离子间存在竞争吸附,EDTA-LDH/zeolite对Cd^(2+)、Pb^(2+)、Cu^(2+)的最大吸附容量分别为65.33、98.35和108.51 mg/g。去除过程中沉淀作用、表面络合、螯合反应等多种机制协同作用,去除行为均符合Langmuir等温模型与拟二阶动力学模型。

Development and Catalytic Cracking Performance of Ultrastable Y Zeolite Rich in Secondary Pores

A novel ultra-stable zeolite, NSZ, rich in secondary pores was developed through the combination of gas-phase andmild hydrothermal methods. This zeolite was successfully tested in an industrial setting for the first time in the world. The porestructure characteristics of the NSZ zeolite prepared for industrial use were analyzed and characterized using BET. The resultsindicate a significant increase in the secondary pore volume of NSZ zeolite compared to the existing ultra-stable zeolite HSZ-5, which is produced through a conventional gas-phase method. The average secondary pore volume to total pore volume ratioin NSZ zeolite was found to be 58.96% higher. The catalytic cracking performance of NSZ zeolite was evaluated. The resultsshowed that the NSC-LTA catalyst, with NSZ as the active component, outperformed the HSC-LTA catalyst with HSZ-5 zeolitein terms of obtaining more high-value products (gasoline and liquefied petroleum gas) during the hydrogenated light cycle oilprocessing. Additionally, the NSC-LTA catalyst showed a significant improvement in coke selectivity.

Production of linear alkylbenzene over Ce containing Beta zeolites

Ce-encapsulated Beta zeolite was synthesized by a one-pot hydrothermal method with citric acid complexing Ce in the absence of Na species.Additional citric acid can effectively prevent the deposition of Ce species during the hydrothermal synthesis of zeolites,leading to uniform distribution of Ce cluster in the framework of Beta zeolites.Moreover,the sodium-free synthesis system resulted that the Brønsted acid sites were mainly located on the straight channels and external surface of Beta zeolites,improving the utilization of Brønsted acid sites.In addition,Ce encapsulated Beta zeolites showed enhanced activity and robust stability in the alkylation of benzene with 1-dodecene based on the synergistic effect between Ce species and Brønsted acid sites,which pave the way for its practical application in the production of alkylbenzene.

OSDA-free synthesis of FeZSM-22 zeolite from natural minerals for n-octane hydroisomerization

A seed-directed approach to synthesizing Fe ZSM-22 zeolite without organic structure directing agent(OSDA)was developed by using Fe-rich diatomite as all aluminum and iron sources.The Fe ZSM-22zeolite with optimal crystallinity and purity can be obtained by systematically adjusting feed composition and synthesis conditions.Characterizations show that Fe ZSM-22 zeolite synthesized with OSDA-free owns high crystallinity,obvious thin needle-shaped morphology and high Bronsted/Lewis acid ratio.Significantly,when used for n-octane hydroisomerization reaction,its derived catalyst exhibits the best catalytic performance reflected by the highest selectivity to C_(8)isomers compared to the two reference catalysts prepared based on a Fe-containing and a Fe-free ZSM-22 synthesized through an OSDA-directed route from natural diatomite and conventional chemicals,respectively.This work provides an alternative route to sustainably synthesizing heteroatomic zeolites with high performance.

High-silica faujasite zeolite-tailored metal encapsulation for the low-temperature production of pentanoic biofuels

Zeolite-encapsulated metal nanoclusters are at the heart of bifunctional catalysts,which hold great potential for petrochemical conversion and the emerging sustainable biorefineries.Nevertheless,efficient encapsulation of metal nanoclusters into a high-silica zeolite Y in particular with good structural integrity still remains a significant challenge.Herein,we have constructed Ru nanoclusters(~1 nm)encapsulated inside a high-silica zeolite Y(SY)with a SiO_(2)/Al_(2)O_(3) ratio(SAR)of 10 via a cooperative strategy for direct zeolite synthesis and a consecutive impregnation for metal encapsulation.Compared with the benchmark Ru/H-USY and other analogues,the as-prepared Ru/H-SY markedly boosts the yields of pentanoic biofuels and stability in the direct hydrodeoxygenation of biomass-derived levulinate even at a mild temperature of 180℃,which are attributed to the notable stabilization of transition states by the enhanced acid accessibility and properly sized constraints of zeolite cavities owing to the good structural integrity.

Facile synthesis of hierarchical NaX zeolite from natural kaolinite for efficient Knoevenagel condensation

Zeolite catalysts have found extensive applications in the synthesis of various fine chemicals.However,the micropores of zeolites impose diffusion limitations on bulky molecules,greatly reducing the catalytic efficiency.Herein,we explore an economic and environmentally friendly method for synthesizing hierarchical NaX zeolite that exhibits improved catalytic performance in the Knoevenagel condensation reaction for producing the useful fine chemical 2-cyano-3-phenylacrylate.The synthesis was achieved via a low-temperature activation of kaolinite and subsequent in-situ transformation strategy without any template or seed.Systematic characterizations reveal that the synthesized NaX zeolite has both intercrystalline and intra-crystalline mesopores,smaller crystal size,and larger external specific surface area compared to commercial NaX zeolite.Detailed mechanism investigations show that the inter-crystalline mesopores are generated by stacking smaller crystals formed from in-situ crystallization of the depolymerized kaolinite,and the intra-crystalline mesopores are inherited from the pores in the depolymerized kaolinite.This synthesis strategy provides an energy-saving and effective way to construct hierarchical zeolites,which may gain wide applications in fine chemical manufacturing.

Facile in situ synthesis and characterization of Fe@Si/zeolite Na composites with magnetic core–shell structures from natural materials for enhanced curcumin loading capacity

Curcumin is a natural polyphenol that is used in various traditional medicines.However,its inherent properties,such as its rapid degradation and metabolism,low bioavailability,and short half-life,are serious problems that must be resolved.To this end,a drug carrier incorporating natural magnetic cores in a zeolite framework was developed and applied to the loading of curcumin in ethanol solutions.In this system,curcumin is encapsulated in a zeolite Na(ZNA)magnetic core–shell structure(Fe@Si/ZNA),which can be easily synthesized using an in situ method.Synthesis of Fe_(3)O_(4) nanoparticles was carried out from natural materials using a co-precipitation method.Analysis of the prepared magnetic core–shell structures and composites was carried out using vibrating-sample magnetometery,Fourier transform infrared spectroscopy,transmission electron microscopy,and x-ray diffraction.The cumulative loading of curcumin in the ZNA composite with 9%nanoparticles was found to reach 90.70%with a relatively long half-life of 32.49 min.Stability tests of curcumin loading in the composite showed that adding magnetic particles to the zeolite framework also increased the stability of the composite structure.Adsorption kinetics and isotherm studies also found that the system follows the pseudo-second-order and Langmuir isotherm models.

Silicalite-1 zeolite encapsulated Fe nanocatalyst for Fenton-like degradation of methylene blue

Encapsulation of Fe nanoparticles in zeolite is a promising way to significantly improve the catalytic activity and stability of Fe-based catalysts during the degradation process of organic pollutants.Herein,Fe nanocatalysts were encapsulated into silicalite-1(S-1)zeolite by using a ligand-protected method(with dicyandiamide(DCD)as a organic ligand)under direct hydrothermal synthesis condition.High-resolution transmission electron microscopy(HRTEM)results confirmed the high dispersion of Fe nanocatalysts which were successfully encapsulated within the voids among the primary particles of the S-1 zeolite.The developed S-1 zeolite encapsulated Fe nanocatalyst(Fe@S-1)exhibited significantly improved catalytic activity and reusability in the catalytic degradation process of methylene blue(MB).Specifically,the developed Fe0.021@S-1 catalyst showed high catalytic degradation activity,giving a high MB degradation efficiency of 100%in 30 min,outperformed the conventional impregnated catalyst(Fe/S-1).Moreover,the Fe@S-1 catalyst afforded an outstanding stability,showing only ca.7.9%activity loss after five cycling tests,while the Fe/S-1 catalyst presented a significantly activity loss of 50.9%after only three cycles.Notably,the encapsulation strategy enabled a relatively lower Fe loading in the Fe@S-1 catalyst in comparison with that of the Fe/S-1 catalyst,i.e.,0.35%vs.0.81%(mass).Radical scavenging experiments along with electron spin resonance(ESR)measurements confirmed that the major role of
OH in the MB degradation process.Specifically,Fe@S-1 catalyst with high molar ratio of[Fe(DCD)]Cl3 is beneficial to form Fe complexes/nanoclusters in the voids(which has large pore size of 1–2 nm)among the primary particles of the zeolite,and thus improving the diffusion and accessibility of reactants to Fe active sites,and thus exhibiting a relatively higher degradation efficiency.This work demonstrates that zeolite-encapsulated Fe nanocatalysts present potential applications in the advanced oxidation of wastewater treatment.

Fabrication of a sinter-resistant Fe-MFI zeolite dragonfruit-like catalyst for syngas to aromatics conversion

Direct conversion of syngas to aromatics has great potential to decrease fossil fuel dependence.Here,a unique structured hybrid catalyst composed of Fe_(3)O_(4) nanoparticles intimately dispersed inside an acidic zeolite is developed.1 to 4 nm sized Fe_(3)O_(4) nanoparticles end up evenly dispersed in an acidic and slightly mesoporous Al-ZSM-5 based on Fe_(3)O_(4) restructuring during co-hydro thermal synthesis using organosilane modification.A very high aromatic productivity of 214 mmolaromatics h^(-1) gFe^(-1) can be obtained with a remarkable 62%aromatic selectivity in hydrocarbons.This catalyst has excellent sintering resistance ability and maintains stable aromatics production over 570 h.The synthetic insights that postulate a mechanism for the metastable oxide-zeolite reorganization during hydrothermal synthesis could serve as a generic route to sinter-resistant oxide-zeolite composite materials with uniform,well-dispersed oxide nanoparticles in close intimacy with-and partially confined in-a zeolite matrix.

Finned Zn-MFI zeolite encapsulated noble metal nanoparticle catalysts for the oxidative dehydrogenation of propane with carbon dioxide

Oxidative dehydrogenation of propane with carbon dioxide(CO_(2)-ODP)characterizes the tandem dehydrogenation of propane to propylene with the reduction of the greenhouse gas of CO_(2)to valuable CO.However,the existing catalyst is limited due to the poor activity and stability,which hinders its industrialization.Herein,we design the finned Zn-MFI zeolite encapsulated noble metal nanoparticles(NPs)as bifunctional catalysts(NPs@Zn-MFI)for CO_(2)-ODP.Characterization results reveal that the Zn2+species are coordinated with the MFI zeolite matrix as isolated cations and the NPs of Pt,Rh,or Rh Pt are highly dispersed in the zeolite crystals.The isolated Zn2+cations are very effective for activating the propane and the small NPs are favorable for activating the CO_(2),which synergistically promote the selective transformation of propane and CO_(2)to propylene and CO.As a result,the optimal 0.25%Rh0.50%Pt@Zn-MFI catalyst shows the best propylene yield,satisfactory CO_(2)conversion,and long-term stability.Moreover,considering the tunable synergetic effects between the isolated cations and NPs,the developed approach offers a general guideline to design more efficient CO_(2)-ODP catalysts,which is validated by the improved performance of the bifunctional catalysts via simply substituting Sn4+cations for Zn2+cations in the MFI zeolite matrix.

CO_(2)utilization in syngas conversion to dimethyl ether and aromatics:Roles and challenges of zeolites-based catalysts

Several studies have proven a strong correlation between global warming and CO_(2)emissions.Annually,38 billion tons of CO_(2)are approximately emitted into the atmosphere.Utilizing CO_(2)via chemical conversion to clean fuels and value-added aromatics can substantially contribute to controlling the problem.Considering the thermodynamic and environmental limitations of hydrogenation of CO_(2)alone to value-added aromatics and fuels,CO_(2)utilization has currently emerged as a promising and practical approach for the production of fuels and aromatics with simultaneous utilization of both CO and CO_(2)wastes.As such,the approach is economically preferable.CO_(2)could be converted directly to fuels by the hydrogenation process or as a part of a syngas mixture.Dimethyl ether(DME)is a clean fuel with a higher energy density,which could be used as a substituent for several fuels such as diesel.In the same vein,value-added aromatics such as benzene,toluene,and xylene(BTX)can be produced from a similar process.Herein,we report a review that collects the most recent studies for the conversion of CO_(2)to DME and aromatics via zeolite-based bifunctional catalysts.We highlighted the main routes for producing DME and aromatics,as well as thoroughly discussed the conducted studies on CO_(2)hydrogenation and CO_(2)-rich syngas utilized as feedstock for conversion to DME and aromatics.The CO_(2)hydrogenation mostly occurs through the methanol-mediated reaction route but is most often limited by low selectivity and catalyst deactivation,particularly in the utilization of CO_(2)alone for the reduction reaction.The review takes an overview of the progress made so far and concluded by identifying the roles and challenges of zeolite-based catalysts for CO_(2)utilization and conversion to DME and aromatics.Accordingly,despite the incredible growth the field received in the last couple of years,however,many research challenges and opportunities associated with this process are still abounded and required to be addressed.Special attention is required for the development of approaches to block diffusion of H2O through zeolite to suppress the excess formation of CO_(2)in CO_(2)-rich syngas hydrogenation to DME and aromatics,exceed the product distribution limits,and suppress catalysts deactivation.

Tungsten incorporated mobil-type eleven zeolite membranes: Facile synthesis and tuneable wettability for highly efficient separation of oil/water mixtures

Tungsten (W) incorporated mobil-type eleven (MEL) zeolite membrane (referred to as W-MEL membrane) with high separation performance was firstly explored for the separation of oil/water mixtures under the influence of gravity.W-MEL membranes were grown on stainless steel (SS) meshes through in-situ hydrothermal growth method facilitated with (3-aminopropyl)triethoxysilane (APTES) modification of stainless steel meshes,which promote the heterogeneous nucleation and crystal growth of W-MEL zeolites onto the mesh surface.W-MEL membranes were grown on different mesh size supports to investigate the effect of mesh size on the separation performance of the membrane.The assynthesized W-MEL membrane supported on 500 mesh (25μm)(W-MEL-500) exhibit the hydrophilic nature with a water contact angle of 11.8°and delivers the best hexane/water mixture separation with a water flux and separation efficiency of 46247 L·m^(-2)·h^(-1)and 99.5%,respectively.The wettability of W-MEL membranes was manipulated from hydrophilic to hydrophobic nature by chemically modifying with the fluorine-free compounds (hexadecyltrimethoxysilane (HDTMS) and dodecyltrimethoxysilane(DDTMS)) to achieve efficient oil-permselective separation of heavy oils from water.Among the hydrophobically modified W-MEL membranes,W-MEL-500-HDTMS having a water contact angle of146.4°delivers the best separation performance for dichloromethane/water mixtures with a constant oil flux and separation efficiency of 61490 L·m^(-2)·h^(-1)and 99.2%,respectively along with the stability tested up to 20 cycles.Both W-MEL-500-HDTMS and W-MEL-500-DDTMS membranes also exhibit similar separation performances for the separation of heavy oil from sea water along with a 20-fold lower corrosion rate in comparison with the bare stainless-steel mesh,indicating their excellent stability in seawater.Compared to the reported zeolite membranes for oil/water separation,the as-synthesized and hydrophobically modified W-MEL membranes shows competitive separation performances in terms of flux and separation efficiency,demonstrating the good potentiality for oil/water separation.

Removal of Organochlorine from Model Oil Using Mg-Modified ZSM-5 Zeolite:Dechlorination Performance,Regeneration,and Thermodynamics

Various metal-modified ZSM-5 zeolite adsorbents prepared by the impregnation method were applied to the removal of organic chlorides from model naphtha.The adsorption performance and regeneration stability were investigated by static adsorption experiments.The morphologies,structural features,and physicochemical properties of the adsorbents were characterized by X-ray diffraction,Brunauer-Emmett-Teller analysis,NH3 temperature-programmed desorption,scanning electron microscopy,transmission electron microscopy,and pyridine adsorption infrared spectroscopy.The Mg/ZSM-5 zeolite adsorbent possessed a relatively high specific surface area and good metal dispersion and exhibited the best dechlorination and regeneration performance.The characterization results revealed that introduction of the metal exerted a significant influence on the acidic properties of the catalyst surface.A decrease in the ratio of Brønsted acidic sites to Lewis acidic sites and an increase in the amount of moderately acidic sites were confirmed to be responsible for the excellent adsorption performance of the Mg-modified ZSM-5 zeolite.Furthermore,the Langmuir adsorption isotherm model was applied to study the adsorption equilibrium and thermodynamics of the Mg/ZSM-5 adsorbent under mild conditions.The results revealed that the removal of 1,2-dichloroethane by the Mg/ZSM-5 adsorbent was endothermic,spontaneous,disordered,and primarily involved physical adsorption.

Hydroisomerization performance of platinum supported on ZSM-22/ZSM-23 intergrowth zeolite catalyst

Hydroisomerization catalysts Pt/ZSM-22, Pt/ZSM-23, and Pt/ZSM-22/ZSM-23 were prepared by supporting Pt on ZSM-22, ZSM-23, and intergrowth zeolite ZSM-22/ZSM-23, respectively. The typical physicochemical properties of these catalysts were characterized by X-Ray Diffraction （XRD）, N2 absorption-desorption, Pyridine-Fourier Transform Infrared （Py-FTIR）, Transmission Electron Microscopy （TEM）, X-Ray Fluorescence （XRF）, Scanning Electron Microscopy （SEM） and NH3- Temperature Programmed Desorption （NH3-TPD）, and the performance of these catalysts in n-dodecane hydroisomerization was evaluated in a continuous down-flow fixed bed with a stainless steel tubular reactor. The characterization results indicated that the intergrowth zeolite ZSM-22/ZSM-23 possessed the dual structure of ZSM-22 and ZSM-23, and the catalyst Pt/ZSM-22/ZSM-23 had similar pores and weak acidity to Pt/ZSM-22 and Pt/ZSM-23 catalysts. Moreover, Pt/ZSM-22/ZSM-23 catalyst showed a high selectivity in hydroisomerization of long chain n-alkanes to mono-branched isomers. The evaluation results for n-dodecane hydroisomerization indicated that the activity of Pt/ZSM-22/ZSM-23 was the lowest, while the hydroisomerization selectivity was the highest among the three catalysts. The maximum yield of i-dodecane product was 68.3% over Pt/ZSM-22/ZSM-23 at 320 ℃.

NiMo/Al_2O_3 catalyst containing nano-sized zeolite Y for deep hydrodesulfurization and hydrodenitrogenation of diesel

Two mixed-matrix NiMo/Al2O3 catalysts containing nano-and micro-sized zeolite Y have been prepared to explore the size effect of zeolite Y particle on the hydrodesulfurization（HDS）and hydrodenitrogenation（HDN）activities of fluid catalytic cracking（FCC）diesel.They were characterized by SEM,BET,XRD,H2-TPR,NH3-TPD and HRTEM.The results show that the catalyst containing nano-sized zeolite Y possesses larger average pore diameter,higher pore volume,weaker and lesser acid sites,more easily reducible metal phases,shorter MoS2 slabs and more slab layers than the catalyst containing micro-sized zeolite Y.The catalysts were also evaluated with a high-pressure fixed-bed reactor using real FCC diesel as feed.The results display that the catalyst containing nano-sized zeolite Y bears higher HDS and HDN activities and exhibits higher relative rate constant for the removal of total sulfur or nitrogen than the one containing micro-sized zeolite.

Effects of Calcination Temperature on the Acidity and Catalytic Performances of HZSM-5 Zeolite Catalysts for the Catalytic Cracking of n-Butane

The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature （excluding 800 ℃）. The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature. The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5 zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.

Deactivation mechanism of beta-zeolite catalyst for synthesis of cumene by benzene alkylation with isopropanol

The alkylation of benzene with isopropanol over beta-zeolite is a more cost-effective solution to cumene production. During the benzene alkylation cycles, the cumene selectivity slowly increased, while the benzene conversion presented the sharp decrease due to catalyst deactivation. The deactivation mechanism of betazeolite catalyst was investigated by characterizing the fresh and used catalysts. The XRD, SEM and TEM results show that the crystalline and particle size of the beta-zeolite catalyst almost remained stable during the alkylation cycles. The drop in catalytic activity and benzene conversion could be explained by the TG, BET,NH_3-TPD and GC–MS results. The organic matters mainly consisted of ethylbenzene, p-xylene and 1-ethyl-3-(1-methyl) benzene produced in the benzene alkylation deposited in the catalyst, which strongly reduced the specific surface area of beta-zeolite catalyst. Moreover, during the reaction cycles, the amount of acidity also significantly decreased. As a result, the catalyst deactivation occurred. To maintain the catalytic performance,the catalyst regeneration was carried out by using ethanol rinse and calcination. The deactivated catalyst could be effectively regenerated by the calcination method and the good catalytic performance was obtained.