The extensive research and development in perovskite solar cells (PSCs) have rekindled the hopes of converting solar energy into electricity.An elusive understanding of underlying mechanisms is required for the develo...The extensive research and development in perovskite solar cells (PSCs) have rekindled the hopes of converting solar energy into electricity.An elusive understanding of underlying mechanisms is required for the development of efficient PSCs.Over the years,Impedance Spectroscopy (IS) characterization,along with complementary techniques,has proven to be an effective way to understand and analyze the charge transport and recombination at interface and bulk of PSCs.The IS of PSCs have been analyzed,interpreted,and improvised continuously,revealing intricate details about the work.However,there is a lack of centralized source of these details,which make it tougher to account for the generalized approach to understand the device properties.The present work is focused on compiling the research done on various PSC device architectures via IS to construct a comprehensive foundation of information on impedance plots,equivalent circuits,and associated processes.展开更多
We present a rigorous proof that quantum circuit algorithm can be transformed into quantum adiabatic algorithm with the exact same time complexity. This means that from a quantum circuit algorithm of L gates we can co...We present a rigorous proof that quantum circuit algorithm can be transformed into quantum adiabatic algorithm with the exact same time complexity. This means that from a quantum circuit algorithm of L gates we can construct a quantum adiabatic algorithm with time complexity of O(L). Additionally, our construction shows that one may exponentially speed up some quantum adiabatic algorithms by properly choosing an evolution path.展开更多
In this paper, a practical equivalent circuit of an active flux-controlled memristor characterized by smooth piecewise-quadratic nonlinearity is designed and an experimental chaotic memristive circuit is implemented. ...In this paper, a practical equivalent circuit of an active flux-controlled memristor characterized by smooth piecewise-quadratic nonlinearity is designed and an experimental chaotic memristive circuit is implemented. The chaotic memristive circuit has an equilibrium set and its stability is dependent on the initial state of the memristor. The initial state-dependent and the circuit parameter-dependent dynamics of the chaotic memristive circuit are investigated via phase portraits, bifurcation diagrams and Lyapunov exponents. Both experimental and simulation results validate the proposed equivalent circuit realization of the active flux-controlled memristor.展开更多
In this paper, based on the equivalent single diode circuit model of the solar cell, an equivalent circuit diagram for two serial solar cells is drawn. Its equations of current and voltage are derived from Kirchhoff'...In this paper, based on the equivalent single diode circuit model of the solar cell, an equivalent circuit diagram for two serial solar cells is drawn. Its equations of current and voltage are derived from Kirchhoff's current and voltage law. First, parameters are obtained from the I-V (current-voltage) curves for typical monocrystalline silicon solar cells (125 mmx 125 mm). Then, by regarding photo-generated current, shunt resistance, serial resistance of the first solar cell, and resistance load as the variables. The properties of shunt currents (Ishl and Ish2), diode currents (/D1 and/]:)2), and load current (IL) for the whole two serial solar cells are numerically analyzed in these four cases for the first time, and the corresponding physical explanations are made. We find that these parameters have different influences on the internal currents of solar cells. Our results will provide a reference for developing higher efficiency solar cell module and contribute to the better understanding of the reason of efficiency loss of solar cell module.展开更多
A novel mapping equivalent approach is proposed in this paper, which can be used for analyzing and realizing a memristor-based dynamical circuit equivalently by a nonlinear dynamical circuit with the same topologies a...A novel mapping equivalent approach is proposed in this paper, which can be used for analyzing and realizing a memristor-based dynamical circuit equivalently by a nonlinear dynamical circuit with the same topologies and circuit parameters. A memristor-based chaotic circuit and the corresponding Chua's chaotic circuit with two output differentiators are taken as examples to illustrate this approach. Equivalent dynamical analysis and realization of the memristor-based chaotic circuit are performed by using Chua's chaotic circuit. The results indicate that the outputs of memristor-based chaotic circuit and the corresponding outputs of Chua's chaotic circuit have identical dynamics. The proposed approach verified by numerical simulations and experimental observations is useful in designing and analyzing memristor-based dynamical circuits.展开更多
A flux-controlled memristor characterized by smooth cubic nonlinearity is taken as an example, upon which the voltage-current relationships (VCRs) between two parallel memristive circuits - a parallel memristor and ...A flux-controlled memristor characterized by smooth cubic nonlinearity is taken as an example, upon which the voltage-current relationships (VCRs) between two parallel memristive circuits - a parallel memristor and capacitor circuit (the parallel MC circuit), and a parallel memristor and inductor circuit (the parallel ML circuit) - are investigated. The results indicate that the VCR between these two parallel memristive circuits is closely related to the circuit parameters, and the frequency and amplitude of the sinusoidal voltage stimulus. An equivalent circuit model of the memristor is built, upon which the circuit simulations and exper/mental measurements of both the parallel MC circuit and the parallel ML circuit are performed, and the results verify the theoretical analysis results.展开更多
Modeling a memristor is an effective way to explore the memristor properties due to the fact that the memristor devices are still not commercially available for common researchers. In this paper, a physical memristive...Modeling a memristor is an effective way to explore the memristor properties due to the fact that the memristor devices are still not commercially available for common researchers. In this paper, a physical memristive device is assumed to exist whose ionic drift direction is perpendicular to the direction of the applied voltage, upon which, corresponding to the HP charge-controlled memristor model, a novel threshold flux-controlled memristor model with a window function is proposed. The fingerprints of the proposed model are analyzed. Especially, a practical equivalent circuit of the proposed model is realized, from which the corresponding experimental fingerprints are captured. The equivalent circuit of the threshold memristor model is appropriate for various memristors based breadboard experiments.展开更多
The equivalent circuit with complex physical constants for a piezoelectric ceramic in thickness mode is established. In the equivalent circuit, electric components (equivalent circuit parameters) are connected to re...The equivalent circuit with complex physical constants for a piezoelectric ceramic in thickness mode is established. In the equivalent circuit, electric components (equivalent circuit parameters) are connected to real and imaginary parts of complex physical coefficients of piezoelectric materials. Based on definitions of dissipation factors, three of them (dielectric, elastic and piezoelectric dissipation factors) are represented by equivalent circuit parameters. Since the equivalent circuit parameters are detectable, the dissipation factors can be easily obtained. In the experiments, the temperature and the stress responses of the three dissipation factors are measured.展开更多
Stainless steel(SS)is one of the most widely used engineering materials in marine engineering.However,its corrosion in the marine atmospheric environment due to the high concentration of Cl-is a problem.The SS corrosi...Stainless steel(SS)is one of the most widely used engineering materials in marine engineering.However,its corrosion in the marine atmospheric environment due to the high concentration of Cl-is a problem.The SS corrosion is a threat to the development and security of marine industry;therefore,evaluating the corrosion resistance of SSs is necessary.In this work,atmospheric corrosion detection probes based on a symmetrical electrode system were used to study the corrosion behaviors of 304 SS and 2205 duplex stainless steel(DSS)in a simulated marine atmosphere.A theoretical model for electrochemical noise(EN)data analysis based on the Thevenin electrochemical equivalent circuit(EEC)model was established.The relationship between the EN characteristic parameters and the corrosion rate was obtained.The Thevenin EEC model analysis showed that the relationship between the noise resistance(Rn),the noise impedance[Rsn(f)],and the impedance modulus(|Z(f)|)was Rn≈Rsn=■.Thus,Rn and Rsn can be used as indicators for quantitative corrosion evaluation.The results of EN detection for the 304 SS and 2205 DSS showed that in a simulated marine atmospheric environment,the passive fi lms on the two SSs were relatively intact at the initial exposure stage,and their dissolution rates were slow.The corrosion resistance of the 2205 DSS was higher than that of the 304 SS.With the deposition of Cl-on the SS surface,pitting was initiated and the dissolution rate increased.The pitting initiation process on the SS surface was random,and part of the active pores could be repassivated.展开更多
To develop real world memristor application circuits, an equivalent circuit model which imitates memductance (mem- ory conductance) of the HP memristor is presented. The equivalent circuit can be used for breadboard...To develop real world memristor application circuits, an equivalent circuit model which imitates memductance (mem- ory conductance) of the HP memristor is presented. The equivalent circuit can be used for breadboard experiments for various application circuit designs of memristor. Based on memductance of the realistic HP memristor and Chua's circuit a new chaotic oscillator is designed. Some basic dynamical behaviors of the oscillator, including equilibrium set, Lyapunov exponent spectrum, and bifurcations with various circuit parameters are investigated theoretically and numerically. To con- firm the correction of the proposed oscillator an analog circuit is designed using the proposed equivalent circuit model of an HP memristor, and the circuit simulations and the experimental results are given.展开更多
Electrochemical quartz crystal impedance system (EQCIS) which allows in situ dynamic quartz crystal impedance measurement in an electrochemical experiment was developed by combining an HP 4395A Network/Spectrum/Impeda...Electrochemical quartz crystal impedance system (EQCIS) which allows in situ dynamic quartz crystal impedance measurement in an electrochemical experiment was developed by combining an HP 4395A Network/Spectrum/Impedance analyzer with an EG&G M283 potentiostat. Equivalent circuit parameters of crystal resonance change significantly during electrodeposition and dissolution of copper in 0.1 mol/L H2SO4 aqueous solution in a cyclic potential sweep experiment, which is explained with an overall picture of mass loading, solution density and viscosity, etc..展开更多
Firstly, relevant stress properties of millisecond level breaking process and microsecond level commutation process of hybrid HVDC circuit breaker are studied in detail on the basis of the analysis for the application...Firstly, relevant stress properties of millisecond level breaking process and microsecond level commutation process of hybrid HVDC circuit breaker are studied in detail on the basis of the analysis for the application environment and topological structure and operating principles of hybrid circuit breakers, and key stress parameters in transient state process of two time dimensions are extracted. The established digital simulation circuit for PSCAD/EMTDC device-level operation of the circuit breaker has verified the stress properties of millisecond level breaking process and microsecond level commutation process. Then, equivalent test method, circuits and parameters based on LC power supply are proposed on the basis of stress extraction. Finally, the results of implemented breaking tests for complete 200 kV circuit breaker, 100 kV and 50 kV circuit breaker units, as well as single power electronic module have verified the accuracy of the simulation circuit and mathematical analysis. The result of this paper can be a guide to electrical structure and test system design of hybrid HVDC circuit breaker.展开更多
Numerous equivalent circuits for cavity discharges have been developed, yet most of these models cannot provide simulated sig- nals that precisely reveal the variability of the discharge’s characteristic parameters, ...Numerous equivalent circuits for cavity discharges have been developed, yet most of these models cannot provide simulated sig- nals that precisely reveal the variability of the discharge’s characteristic parameters, such as repetition rate, magnitude and phase of discharges, which makes them not suitable for intensive studies of discharge process. Therefore, using Simulink code, we theoretically ana- lyzed and studied the classical equivalent circuits of cavity discharges, as well as the influence of circuit components on simulation results, and then proposed a novel equivalent circuit, the key parameters of which were determined according to the physical behavior of cavity discharges. In the novel equivalent circuit, the repetition rate can be changed by discharge resistance, inception and residual voltages; meanwhile the phase of discharge can be controlled by adjusting the parameters of shunt resistance. Furthermore, a controlled current source as a function of space charge is introduced in the equivalent circuit. Compared with the former ones, the simulated signals obtained by this novel model are better approximation of real signals. This work could be referred by latter studies of the characteristics and the me- chanisms of cavity discharge in oil-paper insulation.展开更多
The design of the insulated core transformer(ICT)needs to consider the flux leakage effects.An equivalent linear circuit model is proposed based on the principle of duality.It is composed by two types of leakage induc...The design of the insulated core transformer(ICT)needs to consider the flux leakage effects.An equivalent linear circuit model is proposed based on the principle of duality.It is composed by two types of leakage inductances:conventional leakage between windings and special leakage introduced mainly by the insulation gaps.The values of leakage inductances depend on the dimensions of the core,gaps,or windings and the property of magnetic materials.The circuit allows for quantitatively evaluating influences of ICT internal parameters on its output properties.The winding self- and mutual inductance matrix is mathematically converted to derive the inductance formula.As an example,the leakage parameters of a sixstage two-dimensional(2D) ICT are calculated and analyzed.展开更多
With the growth of capacity of high voltage direct current(HVDC) transmission lines,the ratings of thyristor valves,which are one of the most critical equipments,are getting higher and higher.Verification of performan...With the growth of capacity of high voltage direct current(HVDC) transmission lines,the ratings of thyristor valves,which are one of the most critical equipments,are getting higher and higher.Verification of performance of thyristor valves particularly designed for HVDC project plays an important role in the handover of products between the manufacturer and the client.Conventional test facilities based on philosophy of direct test cannot meet the requirements for modern thyristor valves.New test facilities with high ratings are necessarily built based on philosophy of synthetic test.Over the conventional direct test circuit,the later is an economical and feasible solution with less financial investment and higher test capability.However,the equivalency between the synthetic test and the direct test should be analyzed technically in order to make sure that the condition of verification test in a synthetic test circuit should satisfy the actual operation condition of thyristor valves existing in a real HVDC project,just as in a direct test circuit.Equivalency analysis is focused in this paper,covering the scope of thyristor valves' steady state,and transient state.On the basis of the results achieved,a synthetic test circuit of 6 500 A/50 kV for operational tests of thyristor valves used for up to UHVDC project has newly been set up and already put into service in Xi'an High Voltage Apparatus Research Institute Co.,Ltd.(XIHARI),China.Some of the results have been adopted also by a new national standard of China.展开更多
An equivalent circuit (EC) method for absorbers design is proposed in this paper. Without using full-wave analysis, the EC method can predict the performance of the absorbers. This method is employed to synthesize b...An equivalent circuit (EC) method for absorbers design is proposed in this paper. Without using full-wave analysis, the EC method can predict the performance of the absorbers. This method is employed to synthesize broadband absorbers by inserting the resistors respectively into the single-and double-square loops structures, then two different prototypes with broadband absorbing frequency bands are manufactured and measured. By comparisons with the results both by using the full-wave analysis and by the measurements, the correctness of the new EC method is verified. Some factors which affect the absorbing bandwidth are also investigated. Due to its fast and accurate characteristics, the EC method which can be theoretically applied to arbitrary FSS is a good candidate for broadband design of the absorbers.展开更多
Terahertz quantum cascade lasers(THz QCLs) emitted at 4.4 THz are fabricated and characterized. An equivalent circuit model is established based on the five-level rate equations to describe their characteristics. In...Terahertz quantum cascade lasers(THz QCLs) emitted at 4.4 THz are fabricated and characterized. An equivalent circuit model is established based on the five-level rate equations to describe their characteristics. In order to illustrate the capability of the model, the steady and dynamic performances of the fabricated THz QCLs are simulated by the model.Compared to the sophisticated numerical methods, the presented model has advantages of fast calculation and good compatibility with circuit simulation for system-level designs and optimizations. The validity of the model is verified by the experimental and numerical results.展开更多
A simple analytical method is presented to analyze the transmission of electromagnetic plane waves through multilayer stacked composite two-dimensional( 2D) structures at microwave frequencies. Unlike the traditional ...A simple analytical method is presented to analyze the transmission of electromagnetic plane waves through multilayer stacked composite two-dimensional( 2D) structures at microwave frequencies. Unlike the traditional structure,high impedance surface with graphene sheet is proposed. The structure includes graphene and thin metal patches and meshes. Simple analytical formulas are introduced for the surface impedance of graphene and for the grid impedance of electrically dense arrays of metal square patches or strips. The result of transmission properties is based on the dynamic tunable model of the high impedance surface,which considers the surface conductivity of graphene layer. The transmission coefficient obtained by using the equivalent circuit method is validated against full-wave numerical simulations. The considered equivalent circuit method can be useful in the design of graphene tunable planar devices.展开更多
基金the ORSP of Pandit Deendayal Energy University and DST SERB(IPA/2021/96)for the financial support.
文摘The extensive research and development in perovskite solar cells (PSCs) have rekindled the hopes of converting solar energy into electricity.An elusive understanding of underlying mechanisms is required for the development of efficient PSCs.Over the years,Impedance Spectroscopy (IS) characterization,along with complementary techniques,has proven to be an effective way to understand and analyze the charge transport and recombination at interface and bulk of PSCs.The IS of PSCs have been analyzed,interpreted,and improvised continuously,revealing intricate details about the work.However,there is a lack of centralized source of these details,which make it tougher to account for the generalized approach to understand the device properties.The present work is focused on compiling the research done on various PSC device architectures via IS to construct a comprehensive foundation of information on impedance plots,equivalent circuits,and associated processes.
基金Supported by the The National Key Research and Development Program of China under Grant Nos 2017YFA0303302 and 2018YFA030562the National Natural Science Foundation of China under Grant Nos 11334001 and 11429402
文摘We present a rigorous proof that quantum circuit algorithm can be transformed into quantum adiabatic algorithm with the exact same time complexity. This means that from a quantum circuit algorithm of L gates we can construct a quantum adiabatic algorithm with time complexity of O(L). Additionally, our construction shows that one may exponentially speed up some quantum adiabatic algorithms by properly choosing an evolution path.
基金supported by the Natural Science Foundation of Jiangsu Province of China (Grant No. BK2009105)
文摘In this paper, a practical equivalent circuit of an active flux-controlled memristor characterized by smooth piecewise-quadratic nonlinearity is designed and an experimental chaotic memristive circuit is implemented. The chaotic memristive circuit has an equilibrium set and its stability is dependent on the initial state of the memristor. The initial state-dependent and the circuit parameter-dependent dynamics of the chaotic memristive circuit are investigated via phase portraits, bifurcation diagrams and Lyapunov exponents. Both experimental and simulation results validate the proposed equivalent circuit realization of the active flux-controlled memristor.
基金Project supported by the National High Technology Research and Development Program of China (Grant No.2012AA050302)the National Natural Science Foundation of China (Grant Nos.61076059 and 51202301)the Science & Technology Research Project of Guangdong Province,China (Grant No.2011A032304001)
文摘In this paper, based on the equivalent single diode circuit model of the solar cell, an equivalent circuit diagram for two serial solar cells is drawn. Its equations of current and voltage are derived from Kirchhoff's current and voltage law. First, parameters are obtained from the I-V (current-voltage) curves for typical monocrystalline silicon solar cells (125 mmx 125 mm). Then, by regarding photo-generated current, shunt resistance, serial resistance of the first solar cell, and resistance load as the variables. The properties of shunt currents (Ishl and Ish2), diode currents (/D1 and/]:)2), and load current (IL) for the whole two serial solar cells are numerically analyzed in these four cases for the first time, and the corresponding physical explanations are made. We find that these parameters have different influences on the internal currents of solar cells. Our results will provide a reference for developing higher efficiency solar cell module and contribute to the better understanding of the reason of efficiency loss of solar cell module.
基金supported by the National Natural Science Foundation of China(Grant No.51277017)the Natural Science Foundation of Jiangsu Province,China(Grant No.BK2012583)
文摘A novel mapping equivalent approach is proposed in this paper, which can be used for analyzing and realizing a memristor-based dynamical circuit equivalently by a nonlinear dynamical circuit with the same topologies and circuit parameters. A memristor-based chaotic circuit and the corresponding Chua's chaotic circuit with two output differentiators are taken as examples to illustrate this approach. Equivalent dynamical analysis and realization of the memristor-based chaotic circuit are performed by using Chua's chaotic circuit. The results indicate that the outputs of memristor-based chaotic circuit and the corresponding outputs of Chua's chaotic circuit have identical dynamics. The proposed approach verified by numerical simulations and experimental observations is useful in designing and analyzing memristor-based dynamical circuits.
基金supported by the National Natural Science Foundation of China (Grant No. 51277017)the Natural Science Foundation of Jiangsu Province,China(Grant No. BK2012583)
文摘A flux-controlled memristor characterized by smooth cubic nonlinearity is taken as an example, upon which the voltage-current relationships (VCRs) between two parallel memristive circuits - a parallel memristor and capacitor circuit (the parallel MC circuit), and a parallel memristor and inductor circuit (the parallel ML circuit) - are investigated. The results indicate that the VCR between these two parallel memristive circuits is closely related to the circuit parameters, and the frequency and amplitude of the sinusoidal voltage stimulus. An equivalent circuit model of the memristor is built, upon which the circuit simulations and exper/mental measurements of both the parallel MC circuit and the parallel ML circuit are performed, and the results verify the theoretical analysis results.
基金supported by the National Natural Science Foundation of China(Grant No.51277017)the Natural Science Foundation of Jiangsu Province,China(Grant No.BK2012583)
文摘Modeling a memristor is an effective way to explore the memristor properties due to the fact that the memristor devices are still not commercially available for common researchers. In this paper, a physical memristive device is assumed to exist whose ionic drift direction is perpendicular to the direction of the applied voltage, upon which, corresponding to the HP charge-controlled memristor model, a novel threshold flux-controlled memristor model with a window function is proposed. The fingerprints of the proposed model are analyzed. Especially, a practical equivalent circuit of the proposed model is realized, from which the corresponding experimental fingerprints are captured. The equivalent circuit of the threshold memristor model is appropriate for various memristors based breadboard experiments.
基金Project supported by the National Natural Science Foundation of China (Grant No 50278098).
文摘The equivalent circuit with complex physical constants for a piezoelectric ceramic in thickness mode is established. In the equivalent circuit, electric components (equivalent circuit parameters) are connected to real and imaginary parts of complex physical coefficients of piezoelectric materials. Based on definitions of dissipation factors, three of them (dielectric, elastic and piezoelectric dissipation factors) are represented by equivalent circuit parameters. Since the equivalent circuit parameters are detectable, the dissipation factors can be easily obtained. In the experiments, the temperature and the stress responses of the three dissipation factors are measured.
基金the National Natural Science Foundation of China(No.51701140)。
文摘Stainless steel(SS)is one of the most widely used engineering materials in marine engineering.However,its corrosion in the marine atmospheric environment due to the high concentration of Cl-is a problem.The SS corrosion is a threat to the development and security of marine industry;therefore,evaluating the corrosion resistance of SSs is necessary.In this work,atmospheric corrosion detection probes based on a symmetrical electrode system were used to study the corrosion behaviors of 304 SS and 2205 duplex stainless steel(DSS)in a simulated marine atmosphere.A theoretical model for electrochemical noise(EN)data analysis based on the Thevenin electrochemical equivalent circuit(EEC)model was established.The relationship between the EN characteristic parameters and the corrosion rate was obtained.The Thevenin EEC model analysis showed that the relationship between the noise resistance(Rn),the noise impedance[Rsn(f)],and the impedance modulus(|Z(f)|)was Rn≈Rsn=■.Thus,Rn and Rsn can be used as indicators for quantitative corrosion evaluation.The results of EN detection for the 304 SS and 2205 DSS showed that in a simulated marine atmospheric environment,the passive fi lms on the two SSs were relatively intact at the initial exposure stage,and their dissolution rates were slow.The corrosion resistance of the 2205 DSS was higher than that of the 304 SS.With the deposition of Cl-on the SS surface,pitting was initiated and the dissolution rate increased.The pitting initiation process on the SS surface was random,and part of the active pores could be repassivated.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61271064 and 60971046)the Natural Science Foundation of Zhejiang Province,China(Grant No.LZ12F01001)the Program for Zhejiang Leading Team of Science and Technology Innovation,China(Grant No.2010R50010-07)
文摘To develop real world memristor application circuits, an equivalent circuit model which imitates memductance (mem- ory conductance) of the HP memristor is presented. The equivalent circuit can be used for breadboard experiments for various application circuit designs of memristor. Based on memductance of the realistic HP memristor and Chua's circuit a new chaotic oscillator is designed. Some basic dynamical behaviors of the oscillator, including equilibrium set, Lyapunov exponent spectrum, and bifurcations with various circuit parameters are investigated theoretically and numerically. To con- firm the correction of the proposed oscillator an analog circuit is designed using the proposed equivalent circuit model of an HP memristor, and the circuit simulations and the experimental results are given.
文摘Electrochemical quartz crystal impedance system (EQCIS) which allows in situ dynamic quartz crystal impedance measurement in an electrochemical experiment was developed by combining an HP 4395A Network/Spectrum/Impedance analyzer with an EG&G M283 potentiostat. Equivalent circuit parameters of crystal resonance change significantly during electrodeposition and dissolution of copper in 0.1 mol/L H2SO4 aqueous solution in a cyclic potential sweep experiment, which is explained with an overall picture of mass loading, solution density and viscosity, etc..
基金supported by SGCC Scientific and Technological Project(52110116004W)
文摘Firstly, relevant stress properties of millisecond level breaking process and microsecond level commutation process of hybrid HVDC circuit breaker are studied in detail on the basis of the analysis for the application environment and topological structure and operating principles of hybrid circuit breakers, and key stress parameters in transient state process of two time dimensions are extracted. The established digital simulation circuit for PSCAD/EMTDC device-level operation of the circuit breaker has verified the stress properties of millisecond level breaking process and microsecond level commutation process. Then, equivalent test method, circuits and parameters based on LC power supply are proposed on the basis of stress extraction. Finally, the results of implemented breaking tests for complete 200 kV circuit breaker, 100 kV and 50 kV circuit breaker units, as well as single power electronic module have verified the accuracy of the simulation circuit and mathematical analysis. The result of this paper can be a guide to electrical structure and test system design of hybrid HVDC circuit breaker.
基金Project supported by National Basic Research Program of China(973 Program) (2012CB215205)Fund for Innovative Research Groups of China (51021005)
文摘Numerous equivalent circuits for cavity discharges have been developed, yet most of these models cannot provide simulated sig- nals that precisely reveal the variability of the discharge’s characteristic parameters, such as repetition rate, magnitude and phase of discharges, which makes them not suitable for intensive studies of discharge process. Therefore, using Simulink code, we theoretically ana- lyzed and studied the classical equivalent circuits of cavity discharges, as well as the influence of circuit components on simulation results, and then proposed a novel equivalent circuit, the key parameters of which were determined according to the physical behavior of cavity discharges. In the novel equivalent circuit, the repetition rate can be changed by discharge resistance, inception and residual voltages; meanwhile the phase of discharge can be controlled by adjusting the parameters of shunt resistance. Furthermore, a controlled current source as a function of space charge is introduced in the equivalent circuit. Compared with the former ones, the simulated signals obtained by this novel model are better approximation of real signals. This work could be referred by latter studies of the characteristics and the me- chanisms of cavity discharge in oil-paper insulation.
基金supported by National Natural Science Foundation of China(No.11305068)the‘‘2011 project’’organized by Hubei Collaboration Innovation Center of Non-power Nuclear Technology
文摘The design of the insulated core transformer(ICT)needs to consider the flux leakage effects.An equivalent linear circuit model is proposed based on the principle of duality.It is composed by two types of leakage inductances:conventional leakage between windings and special leakage introduced mainly by the insulation gaps.The values of leakage inductances depend on the dimensions of the core,gaps,or windings and the property of magnetic materials.The circuit allows for quantitatively evaluating influences of ICT internal parameters on its output properties.The winding self- and mutual inductance matrix is mathematically converted to derive the inductance formula.As an example,the leakage parameters of a sixstage two-dimensional(2D) ICT are calculated and analyzed.
基金Project Supported by National Development and Reform Commission(No.[2006]2709)
文摘With the growth of capacity of high voltage direct current(HVDC) transmission lines,the ratings of thyristor valves,which are one of the most critical equipments,are getting higher and higher.Verification of performance of thyristor valves particularly designed for HVDC project plays an important role in the handover of products between the manufacturer and the client.Conventional test facilities based on philosophy of direct test cannot meet the requirements for modern thyristor valves.New test facilities with high ratings are necessarily built based on philosophy of synthetic test.Over the conventional direct test circuit,the later is an economical and feasible solution with less financial investment and higher test capability.However,the equivalency between the synthetic test and the direct test should be analyzed technically in order to make sure that the condition of verification test in a synthetic test circuit should satisfy the actual operation condition of thyristor valves existing in a real HVDC project,just as in a direct test circuit.Equivalency analysis is focused in this paper,covering the scope of thyristor valves' steady state,and transient state.On the basis of the results achieved,a synthetic test circuit of 6 500 A/50 kV for operational tests of thyristor valves used for up to UHVDC project has newly been set up and already put into service in Xi'an High Voltage Apparatus Research Institute Co.,Ltd.(XIHARI),China.Some of the results have been adopted also by a new national standard of China.
基金Project supported by the Science Foundation for New Century Excellent Talents in University of China (Grant No. NCET-10-0894)
文摘An equivalent circuit (EC) method for absorbers design is proposed in this paper. Without using full-wave analysis, the EC method can predict the performance of the absorbers. This method is employed to synthesize broadband absorbers by inserting the resistors respectively into the single-and double-square loops structures, then two different prototypes with broadband absorbing frequency bands are manufactured and measured. By comparisons with the results both by using the full-wave analysis and by the measurements, the correctness of the new EC method is verified. Some factors which affect the absorbing bandwidth are also investigated. Due to its fast and accurate characteristics, the EC method which can be theoretically applied to arbitrary FSS is a good candidate for broadband design of the absorbers.
基金Project supported by the National Basic Research Program of China(Grant No.2014CB339803)the National High Technology Research and Development Program of China(Grant No.2011AA010205)+5 种基金the National Natural Science Foundation of China(Grant Nos.61131006,61321492,and 61404149)the Major National Development Project of Scientific Instrument and Equipment,China(Grant No.2011YQ150021)the National Science and Technology Major Project,China(Grant No.2011ZX02707)the Major Project,China(Grant No.YYYJ-1123-1)the International Collaboration and Innovation Program on High Mobility Materials Engineering of the Chinese Academy of Sciencesthe Shanghai Municipal Commission of Science and Technology,China(Grant Nos.14530711300)
文摘Terahertz quantum cascade lasers(THz QCLs) emitted at 4.4 THz are fabricated and characterized. An equivalent circuit model is established based on the five-level rate equations to describe their characteristics. In order to illustrate the capability of the model, the steady and dynamic performances of the fabricated THz QCLs are simulated by the model.Compared to the sophisticated numerical methods, the presented model has advantages of fast calculation and good compatibility with circuit simulation for system-level designs and optimizations. The validity of the model is verified by the experimental and numerical results.
基金Supported in part by the Funding of Jiangsu Innovation Program for Graduate Education(KYLX-0275,KYLX-0276)the Fundamental Research Funds for the Central Universitiesthe Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘A simple analytical method is presented to analyze the transmission of electromagnetic plane waves through multilayer stacked composite two-dimensional( 2D) structures at microwave frequencies. Unlike the traditional structure,high impedance surface with graphene sheet is proposed. The structure includes graphene and thin metal patches and meshes. Simple analytical formulas are introduced for the surface impedance of graphene and for the grid impedance of electrically dense arrays of metal square patches or strips. The result of transmission properties is based on the dynamic tunable model of the high impedance surface,which considers the surface conductivity of graphene layer. The transmission coefficient obtained by using the equivalent circuit method is validated against full-wave numerical simulations. The considered equivalent circuit method can be useful in the design of graphene tunable planar devices.