Three M_(W)>7.0 earthquakes in 2020-2021 occurred in the Shumagin seismic gap and its adjacent area of the Alaska-Aleutian subduction zone,including the Mw7.8 Simeonof thrust earthquake on July 22,2020,the M_(W)7.6...Three M_(W)>7.0 earthquakes in 2020-2021 occurred in the Shumagin seismic gap and its adjacent area of the Alaska-Aleutian subduction zone,including the Mw7.8 Simeonof thrust earthquake on July 22,2020,the M_(W)7.6 Sand Point strike-slip earthquake on October 19,2020,and the M_(W)8.2 Chignik thrust earthquake on July 29,2021.The spatial and temporal proximity of these three earthquakes prompts us to probe stress-triggering effects among them.Here we examine the coseismic Coulomb stress change imparted by the three earthquakes and their influence on the subduction interface.Our results show that:(1)The Simeonof earthquake has strong loading effects on the subsequent Sand Point and Chignik earthquakes,with the Coulomb stress changes of 3.95 bars and 2.89 bars,respectively.The Coulomb stress change caused by the Sand Point earthquake at the hypocenter of the Chignik earthquake is merely around 0.01 bars,suggesting the negligible triggering effect on the latter earthquake;(2)The triggering effects of the Simeonof,Sand Point,and Chignik earthquakes on aftershocks within three months are not well pronounced because of the triggering rates of 38%,14%,and 43%respectively.Other factors may have played an important role in promoting the occurrence of these aftershocks,such as the roughness of the subduction interface,the complicated velocity structure of the lithosphere,and the heterogeneous prestress therein;(3)The three earthquakes caused remarkable coseismic Coulomb stress changes at the subduction interface nearby these mainshocks,with an average Coulomb stress change of 3.2 bars in the shallow region directly inwards the trench.展开更多
This paper discusses complete convergence properties of the sums of -mixing random sequences.As a result,we improve the corresponding results of Wu Qunying(2001). And extended the Baum and Katz complete convergence ...This paper discusses complete convergence properties of the sums of -mixing random sequences.As a result,we improve the corresponding results of Wu Qunying(2001). And extended the Baum and Katz complete convergence to the case of -mixing random sequences by moment inequality and truncating without necessarily adding any extra conditions.展开更多
We give some theorems of strong law of large numbers and complete convergence for sequences of φ-mixing random variables. In particular, Wittmann's strong law of large numbers and Teicher's strong law of large nnum...We give some theorems of strong law of large numbers and complete convergence for sequences of φ-mixing random variables. In particular, Wittmann's strong law of large numbers and Teicher's strong law of large nnumbers for independent random variables are generalized to the case of φ -minxing random variables.展开更多
In this paper, the complete convergence and strong law of large numbers for weighted sums of φ-mixing sequence with different distribution are investigated under some weaker moment conditions. Our results extend ones...In this paper, the complete convergence and strong law of large numbers for weighted sums of φ-mixing sequence with different distribution are investigated under some weaker moment conditions. Our results extend ones of independent sequence with identical distribution to the case of φ-mixing sequence with different distribution.展开更多
In this paper, the complete convergence and weak law of large numbers are established for ρ-mixing sequences of random variables. Our results extend and improve the Baum and Katz complete convergence theorem and the ...In this paper, the complete convergence and weak law of large numbers are established for ρ-mixing sequences of random variables. Our results extend and improve the Baum and Katz complete convergence theorem and the classical weak law of large numbers, etc. from independent sequences of random variables to ρ-mixing sequences of random variables without necessarily adding any extra conditions.展开更多
In this article, we prove upper large deviations for the empirical measure generated by stationary mixing random sequence under some suitable assumptions and upper large deviations for the mixing random sequence.
Under some conditions on probability, the author obtains some results on the complete convergence for partial sums of not necessary identically distributed p-mixing se- quences, and the complete convergence for partia...Under some conditions on probability, the author obtains some results on the complete convergence for partial sums of not necessary identically distributed p-mixing se- quences, and the complete convergence for partial sums of B-valued martingale differences is also studied. As application the author gives the corresponding results on the complete convergence for randomly indexed partial sums.展开更多
In this paper, we prove an almost sure central limit theorem for weighted sums of mixing sequences of random variables without stationary assumptions. We no longer restrict to logarithmic averages, but allow rather ar...In this paper, we prove an almost sure central limit theorem for weighted sums of mixing sequences of random variables without stationary assumptions. We no longer restrict to logarithmic averages, but allow rather arbitrary weight sequences. This extends the earlier work on mixing random variables展开更多
Based on the study of stratigraphic sedimentary facies of the prototype sedimentary basin formed in the Late Devonian to Permian Period in the Tarim Basin, the prototype sedimentary basin are divided into five order s...Based on the study of stratigraphic sedimentary facies of the prototype sedimentary basin formed in the Late Devonian to Permian Period in the Tarim Basin, the prototype sedimentary basin are divided into five order sequences according to the theory of sequence stratigraphy. It is considered that the Upper Devonian–Lower Carboniferous shore-mixing shelf in the lower part of the prototype sedimentary basin is a typical third-order sequence and a sequence development model is established. The third-order sequence is actually a transgression systems tract and highstand systems tract cycle assemblage, and the type I sequence(no lowstand systems tract) is a typical developmental mode of the third order sequence, and the identification mark is the existence of huge mudstone and limestone wedges from sea to land. The fifth-order parasequence is the basic sequence, which is a single cycle sequence. The thin layer limestone isochronous sediments, which are easy to be identified in the mixed shelf areas, are the isochronous sediments of the largest or secondary marine-flooding surface. The mixed shelf area belongs to the equilibrium sedimentary profile of internal and external sediments, and there is no condensed section. The inclined deposition phenomenon of extraneous source sediments in the sea area weakens or disappears in the mixed shelf area. The paleogeomorphology at the bottom of the third-order sequence is a terrace-slope break zone. This paleogeomorphological feature is not only the main reason for the sedimentary diachronism of Donghe sandstone, but also the main reason for the formation of the transgression-highstand fourth-order cyclic sequences of the Donghe sandstone section and its upper gravel-bearing sandstone section.展开更多
In convex metric spaces, the sufficient and necessary conditions for Ishikawa iterative sequences of uniformly quasi-Lipschitzian mapping T with mixed errors to converge to a fixed point ate proved, and as a special c...In convex metric spaces, the sufficient and necessary conditions for Ishikawa iterative sequences of uniformly quasi-Lipschitzian mapping T with mixed errors to converge to a fixed point ate proved, and as a special case, in which T need not be continuous. The results of this paper improve and extend some recent results.展开更多
The study area is located in the east Tabas Block in Central Iran. Facies analysis of the Qal'eh Dokhtar Formation(middle Callovian to late Oxfordian) was carried out on two stratigraphic sections and applied to de...The study area is located in the east Tabas Block in Central Iran. Facies analysis of the Qal'eh Dokhtar Formation(middle Callovian to late Oxfordian) was carried out on two stratigraphic sections and applied to depositional environment and sequence stratigraphy interpretation. This formation conformably overlies and underlies the marly-silty Baghamshah and the calcareous Esfandiar formations, respectively. Lateral and vertical facies changes documents low-to high energy environments, including tidal-flat, beach to intertidal, lagoon, barrier, and open-marine. According to these facies associations and absence of resedimentation deposits a depositional model of a mixed carbonate-siliciclastic ramp was proposed for the Qal'eh Dokhtar Formation. Seven third-order depositional sequences were identified in each two measured stratigraphic sections. Transgressive systems tracts(TSTs) show deepening upward trends, i.e. shallow water beach to intertidal and lagoonal facies, while highstand systems tracts(HST) show shallowing upward trends in which deep water facies are overlain by shallow water facies. All sequence boundaries(except at the base of the stratigraphic column) are of the no erosional(SB2) types. We conclude eustatic rather than tectonic factors played a dominant role in controlling carbonate depositional environments in the study area.展开更多
As two independent problems,scheduling for parts fabrication line and sequencing for mixed-model assembly line have been addressed respectively by many researchers.However,these two problems should be considered simul...As two independent problems,scheduling for parts fabrication line and sequencing for mixed-model assembly line have been addressed respectively by many researchers.However,these two problems should be considered simultaneously to improve the efficiency of the whole fabrication/assembly systems.By far,little research effort is devoted to sequencing problems for mixed-model fabrication/assembly systems.This paper is concerned about the sequencing problems in pull production systems which are composed of one mixed-model assembly line with limited intermediate buffers and two flexible parts fabrication flow lines with identical parallel machines and limited intermediate buffers.Two objectives are considered simultaneously:minimizing the total variation in parts consumption in the assembly line and minimizing the total makespan cost in the fabrication/assembly system.The integrated optimization framework,mathematical models and the method to construct the complete schedules for the fabrication lines according to the production sequences for the first stage in fabrication lines are presented.Since the above problems are non-deterministic polynomial-hard(NP-hard),a modified multi-objective genetic algorithm is proposed for solving the models,in which a method to generate the production sequences for the fabrication lines from the production sequences for the assembly line and a method to generate the initial population are put forward,new selection,crossover and mutation operators are designed,and Pareto ranking method and sharing function method are employed to evaluate the individuals' fitness.The feasibility and efficiency of the multi-objective genetic algorithm is shown by computational comparison with a multi-objective simulated annealing algorithm.The sequencing problems for mixed-model production systems can be solved effectively by the proposed modified multi-objective genetic algorithm.展开更多
This study is focused on sedimentary environments, facies distribution, and sequence stratigraphy. The facies and sequence stratigraphic analyses of the Bahram Formation(middleelate Devonian) in southcentral Iran ar...This study is focused on sedimentary environments, facies distribution, and sequence stratigraphy. The facies and sequence stratigraphic analyses of the Bahram Formation(middleelate Devonian) in southcentral Iran are based on two measured stratigraphic sections in the southern Tabas block. The Bahram Formation overlies red sandstones Padeha Formation in sections Hutk and Sardar and is overlain by Carboniferous carbonate deposits of Hutk Formation paraconformably, with a thickness of 354 and386 m respectively. Mixed siliciclastic and carbonate sediments are present in this succession. The field observations and laboratory studies were used to identify 14 micro/petrofacies, which can be grouped into 5 depositional environments: shore, tidal flat, lagoon, shoal and shallow open marine. A mixed carbonate-detrital shallow shelf is suggested for the depositional environment of the Bahram Formation which deepens to the east(Sardar section) and thins in southern locations(Hutk section). Three 3rdorder cyclic siliciclastic and carbonate sequences in the Bahram Formation and one sequence shared with the overlying joint with Hutk Formation are identified, on the basis of shallowing upward patterns in the micro/pertofacies.展开更多
This article studies the fault detection filtering design problem for Roesser type two-dimensional(2-D)nonlinear systems described by uncertain 2-D Takagi-Sugeno(T-S)fuzzy models.Firstly,fuzzy Lyapunov functions are c...This article studies the fault detection filtering design problem for Roesser type two-dimensional(2-D)nonlinear systems described by uncertain 2-D Takagi-Sugeno(T-S)fuzzy models.Firstly,fuzzy Lyapunov functions are constructed and the 2-D Fourier transform is exploited,based on which a finite frequency fault detection filtering design method is proposed such that a residual signal is generated with robustness to external disturbances and sensitivity to faults.It has been shown that the utilization of available frequency spectrum information of faults and disturbances makes the proposed filtering design method more general and less conservative compared with a conventional nonfrequency based filtering design approach.Then,with the proposed evaluation function and its threshold,a novel mixed finite frequency H_(∞)/H_(-)fault detection algorithm is developed,based on which the fault can be immediately detected once the evaluation function exceeds the threshold.Finally,it is verified with simulation studies that the proposed method is effective and less conservative than conventional non-frequency and/or common Lyapunov function based filtering design methods.展开更多
The mixed propagator (MP) approach to ρ-ω mixing is discussed. It is found that under the pole-approximation assumption the results of MP approach is not compatible both with the effective Lagrangian theory andwith ...The mixed propagator (MP) approach to ρ-ω mixing is discussed. It is found that under the pole-approximation assumption the results of MP approach is not compatible both with the effective Lagrangian theory andwith the experiment measurement criterion. To overcome these inconsistent, we propose a new MP approach in whichthe physical states of ρ and ω are determined by the requirement of experimental measurement to meson resonance. Interms of this new MP approach, the EM pion form factor Fπ and form factors of ρo →π0γ and of ω→πo γ are derived.The results of Fπ are in good agreement with data. The form factor of ρo →π0γ exhibits a hidden charge-asymmetryenhancement effect which agrees with the prediction of the effective Lagrangian theory.展开更多
In this paper, we investigate the nonparametric regression model based on ρ-mixing errors, which are stochastically dominated by a nonnegative random variable. Weobtain the convergence rate for the weighted estimator...In this paper, we investigate the nonparametric regression model based on ρ-mixing errors, which are stochastically dominated by a nonnegative random variable. Weobtain the convergence rate for the weighted estimator of unknown function g(x) in pth-mean, which yields the convergence rate in probability. Moreover, an example of the nearestneighbor estimator is also illustrated and the convergence rates of estimator are presented.展开更多
[Object]To providing new data for phylogenesis of Bangia atropurpurea by the sequencing of internal transcribed spacer(ITS region)of rDNA.[Method]B.atropurpurea was collected from Niangziguan Spring in Shanxi,the DN...[Object]To providing new data for phylogenesis of Bangia atropurpurea by the sequencing of internal transcribed spacer(ITS region)of rDNA.[Method]B.atropurpurea was collected from Niangziguan Spring in Shanxi,the DNA was extracted and the primers were designed for PCR amplification so as to obtain ITS gene sequence.[Result]The homology of ITS region between B.atropurpurea and Porphyra oligospermatangia was 75%,which was 79% between B.atropurpurea and P.yezoensis.[Conclusion]Compared with other genes,the ITS sequence had a greater evolution rate.The differences in classification and distribution resulted in the sequence diversity.展开更多
On the basis of the records of strong seismic events taking place in soft carbonate sediments, a new seismic sequence system of vibrational liquefaction is established, which consists of a series of units, such as esc...On the basis of the records of strong seismic events taking place in soft carbonate sediments, a new seismic sequence system of vibrational liquefaction is established, which consists of a series of units, such as escaped structure of micrite veins and liquefied deformation formed in the period of seismic liquefaction, land subsidence structure after liquefaction, tsunamic hummocky and turbidite produced by seismic events, This sequence is a generalization and summation of field observation in vast areas, which shows the whole process of a strong seismic event and provides an unified theoretical explanation. The pattern of the seismic sequence by vibrational liquefaction provides one of correlation standards for geologists in the field to discriminate events in carbonate sequences. Based on the pattern of seismic sequence, the authors first advance a new conception of the Palaeo-Tanlu (Tancheng-Lujiang) Zone and discuss primarily its geological significations.展开更多
基金supported by grants from the National Natural Science Foundation of China(Grant No.sU2139205,41774011,41874011)the National Key Research and Development Program of China(Grant No.2018YFC1503605)。
文摘Three M_(W)>7.0 earthquakes in 2020-2021 occurred in the Shumagin seismic gap and its adjacent area of the Alaska-Aleutian subduction zone,including the Mw7.8 Simeonof thrust earthquake on July 22,2020,the M_(W)7.6 Sand Point strike-slip earthquake on October 19,2020,and the M_(W)8.2 Chignik thrust earthquake on July 29,2021.The spatial and temporal proximity of these three earthquakes prompts us to probe stress-triggering effects among them.Here we examine the coseismic Coulomb stress change imparted by the three earthquakes and their influence on the subduction interface.Our results show that:(1)The Simeonof earthquake has strong loading effects on the subsequent Sand Point and Chignik earthquakes,with the Coulomb stress changes of 3.95 bars and 2.89 bars,respectively.The Coulomb stress change caused by the Sand Point earthquake at the hypocenter of the Chignik earthquake is merely around 0.01 bars,suggesting the negligible triggering effect on the latter earthquake;(2)The triggering effects of the Simeonof,Sand Point,and Chignik earthquakes on aftershocks within three months are not well pronounced because of the triggering rates of 38%,14%,and 43%respectively.Other factors may have played an important role in promoting the occurrence of these aftershocks,such as the roughness of the subduction interface,the complicated velocity structure of the lithosphere,and the heterogeneous prestress therein;(3)The three earthquakes caused remarkable coseismic Coulomb stress changes at the subduction interface nearby these mainshocks,with an average Coulomb stress change of 3.2 bars in the shallow region directly inwards the trench.
基金Supported by the National Natural Science Foundation of China(11061012) Supported by the Natural Science Foundation of Guangxi(2010GXNSFA013121)
文摘This paper discusses complete convergence properties of the sums of -mixing random sequences.As a result,we improve the corresponding results of Wu Qunying(2001). And extended the Baum and Katz complete convergence to the case of -mixing random sequences by moment inequality and truncating without necessarily adding any extra conditions.
基金Supported by the National Natural Science Foundation of China (10671149)
文摘We give some theorems of strong law of large numbers and complete convergence for sequences of φ-mixing random variables. In particular, Wittmann's strong law of large numbers and Teicher's strong law of large nnumbers for independent random variables are generalized to the case of φ -minxing random variables.
基金Supported by the National Natural Science Foundation of China(11671012, 11526033, 11501004, 11501005) Supported by the Natural Science Foundation of Anhui Province(1608085QA02) Supported by the Science Fund for Distinguished Young Scholars of Anhui Province(1508085J06)
文摘In this paper, the complete convergence and strong law of large numbers for weighted sums of φ-mixing sequence with different distribution are investigated under some weaker moment conditions. Our results extend ones of independent sequence with identical distribution to the case of φ-mixing sequence with different distribution.
文摘In this paper, the complete convergence and weak law of large numbers are established for ρ-mixing sequences of random variables. Our results extend and improve the Baum and Katz complete convergence theorem and the classical weak law of large numbers, etc. from independent sequences of random variables to ρ-mixing sequences of random variables without necessarily adding any extra conditions.
基金The NSF (10571073) of China985 Program of Jilin University
文摘In this article, we prove upper large deviations for the empirical measure generated by stationary mixing random sequence under some suitable assumptions and upper large deviations for the mixing random sequence.
文摘Under some conditions on probability, the author obtains some results on the complete convergence for partial sums of not necessary identically distributed p-mixing se- quences, and the complete convergence for partial sums of B-valued martingale differences is also studied. As application the author gives the corresponding results on the complete convergence for randomly indexed partial sums.
文摘In this paper, we prove an almost sure central limit theorem for weighted sums of mixing sequences of random variables without stationary assumptions. We no longer restrict to logarithmic averages, but allow rather arbitrary weight sequences. This extends the earlier work on mixing random variables
文摘Based on the study of stratigraphic sedimentary facies of the prototype sedimentary basin formed in the Late Devonian to Permian Period in the Tarim Basin, the prototype sedimentary basin are divided into five order sequences according to the theory of sequence stratigraphy. It is considered that the Upper Devonian–Lower Carboniferous shore-mixing shelf in the lower part of the prototype sedimentary basin is a typical third-order sequence and a sequence development model is established. The third-order sequence is actually a transgression systems tract and highstand systems tract cycle assemblage, and the type I sequence(no lowstand systems tract) is a typical developmental mode of the third order sequence, and the identification mark is the existence of huge mudstone and limestone wedges from sea to land. The fifth-order parasequence is the basic sequence, which is a single cycle sequence. The thin layer limestone isochronous sediments, which are easy to be identified in the mixed shelf areas, are the isochronous sediments of the largest or secondary marine-flooding surface. The mixed shelf area belongs to the equilibrium sedimentary profile of internal and external sediments, and there is no condensed section. The inclined deposition phenomenon of extraneous source sediments in the sea area weakens or disappears in the mixed shelf area. The paleogeomorphology at the bottom of the third-order sequence is a terrace-slope break zone. This paleogeomorphological feature is not only the main reason for the sedimentary diachronism of Donghe sandstone, but also the main reason for the formation of the transgression-highstand fourth-order cyclic sequences of the Donghe sandstone section and its upper gravel-bearing sandstone section.
文摘In convex metric spaces, the sufficient and necessary conditions for Ishikawa iterative sequences of uniformly quasi-Lipschitzian mapping T with mixed errors to converge to a fixed point ate proved, and as a special case, in which T need not be continuous. The results of this paper improve and extend some recent results.
基金financial support given to this study by the Department of Geology of Ferdowsi University of Mashhad, Iran (code 3/28001)
文摘The study area is located in the east Tabas Block in Central Iran. Facies analysis of the Qal'eh Dokhtar Formation(middle Callovian to late Oxfordian) was carried out on two stratigraphic sections and applied to depositional environment and sequence stratigraphy interpretation. This formation conformably overlies and underlies the marly-silty Baghamshah and the calcareous Esfandiar formations, respectively. Lateral and vertical facies changes documents low-to high energy environments, including tidal-flat, beach to intertidal, lagoon, barrier, and open-marine. According to these facies associations and absence of resedimentation deposits a depositional model of a mixed carbonate-siliciclastic ramp was proposed for the Qal'eh Dokhtar Formation. Seven third-order depositional sequences were identified in each two measured stratigraphic sections. Transgressive systems tracts(TSTs) show deepening upward trends, i.e. shallow water beach to intertidal and lagoonal facies, while highstand systems tracts(HST) show shallowing upward trends in which deep water facies are overlain by shallow water facies. All sequence boundaries(except at the base of the stratigraphic column) are of the no erosional(SB2) types. We conclude eustatic rather than tectonic factors played a dominant role in controlling carbonate depositional environments in the study area.
基金supported by National Natural Science Foundation of China (Grant No.50875101)National Hi-tech Research and Development Program of China (863 Program,Grant No.2007AA04Z186)
文摘As two independent problems,scheduling for parts fabrication line and sequencing for mixed-model assembly line have been addressed respectively by many researchers.However,these two problems should be considered simultaneously to improve the efficiency of the whole fabrication/assembly systems.By far,little research effort is devoted to sequencing problems for mixed-model fabrication/assembly systems.This paper is concerned about the sequencing problems in pull production systems which are composed of one mixed-model assembly line with limited intermediate buffers and two flexible parts fabrication flow lines with identical parallel machines and limited intermediate buffers.Two objectives are considered simultaneously:minimizing the total variation in parts consumption in the assembly line and minimizing the total makespan cost in the fabrication/assembly system.The integrated optimization framework,mathematical models and the method to construct the complete schedules for the fabrication lines according to the production sequences for the first stage in fabrication lines are presented.Since the above problems are non-deterministic polynomial-hard(NP-hard),a modified multi-objective genetic algorithm is proposed for solving the models,in which a method to generate the production sequences for the fabrication lines from the production sequences for the assembly line and a method to generate the initial population are put forward,new selection,crossover and mutation operators are designed,and Pareto ranking method and sharing function method are employed to evaluate the individuals' fitness.The feasibility and efficiency of the multi-objective genetic algorithm is shown by computational comparison with a multi-objective simulated annealing algorithm.The sequencing problems for mixed-model production systems can be solved effectively by the proposed modified multi-objective genetic algorithm.
基金a part of project of the Hormozgan University and two master theses of the senior author, which is supported by the Department of Geology at Hormozgan University of Bandar Abbas, Iran
文摘This study is focused on sedimentary environments, facies distribution, and sequence stratigraphy. The facies and sequence stratigraphic analyses of the Bahram Formation(middleelate Devonian) in southcentral Iran are based on two measured stratigraphic sections in the southern Tabas block. The Bahram Formation overlies red sandstones Padeha Formation in sections Hutk and Sardar and is overlain by Carboniferous carbonate deposits of Hutk Formation paraconformably, with a thickness of 354 and386 m respectively. Mixed siliciclastic and carbonate sediments are present in this succession. The field observations and laboratory studies were used to identify 14 micro/petrofacies, which can be grouped into 5 depositional environments: shore, tidal flat, lagoon, shoal and shallow open marine. A mixed carbonate-detrital shallow shelf is suggested for the depositional environment of the Bahram Formation which deepens to the east(Sardar section) and thins in southern locations(Hutk section). Three 3rdorder cyclic siliciclastic and carbonate sequences in the Bahram Formation and one sequence shared with the overlying joint with Hutk Formation are identified, on the basis of shallowing upward patterns in the micro/pertofacies.
基金supported in part by the National Natural Science Foundation of China(62373152,62333005,U21B6001,62073143,62273121)in part by the Natural Science Funds for Excellent Young Scholars of Hebei Province in 2022(F2022202014)+1 种基金in part by Science and Technology Research Project of Colleges and Universities in Hebei Province(BJ2020017)in part by the China Postdoctoral Science Foundation(2022M711639,2023T160320).
文摘This article studies the fault detection filtering design problem for Roesser type two-dimensional(2-D)nonlinear systems described by uncertain 2-D Takagi-Sugeno(T-S)fuzzy models.Firstly,fuzzy Lyapunov functions are constructed and the 2-D Fourier transform is exploited,based on which a finite frequency fault detection filtering design method is proposed such that a residual signal is generated with robustness to external disturbances and sensitivity to faults.It has been shown that the utilization of available frequency spectrum information of faults and disturbances makes the proposed filtering design method more general and less conservative compared with a conventional nonfrequency based filtering design approach.Then,with the proposed evaluation function and its threshold,a novel mixed finite frequency H_(∞)/H_(-)fault detection algorithm is developed,based on which the fault can be immediately detected once the evaluation function exceeds the threshold.Finally,it is verified with simulation studies that the proposed method is effective and less conservative than conventional non-frequency and/or common Lyapunov function based filtering design methods.
文摘The mixed propagator (MP) approach to ρ-ω mixing is discussed. It is found that under the pole-approximation assumption the results of MP approach is not compatible both with the effective Lagrangian theory andwith the experiment measurement criterion. To overcome these inconsistent, we propose a new MP approach in whichthe physical states of ρ and ω are determined by the requirement of experimental measurement to meson resonance. Interms of this new MP approach, the EM pion form factor Fπ and form factors of ρo →π0γ and of ω→πo γ are derived.The results of Fπ are in good agreement with data. The form factor of ρo →π0γ exhibits a hidden charge-asymmetryenhancement effect which agrees with the prediction of the effective Lagrangian theory.
基金Supported by National Natural Science Foundation of China(11426032,11501005)Natural Science Foundation of Anhui Province(1408085QA02,1508085QA01,1508085J06)+5 种基金Provincial Natural Science Research Project of Anhui Colleges(KJ2014A010,KJ2014A020,KJ2015A065)Higher Education Talent Revitalization Project of Anhui Province(2013SQRL005ZD)Quality Engineering Project of Anhui Province(2015jyxm054,2015jyxm057)Students Science Research Training Program of Anhui University(KYXL2014016,KYXL2014013)Applied Teaching Model Curriculum of Anhui University(XJYYKC1401,ZLTS2015052,ZLTS2015053)Doctoral Research Start-up Funds Projects of Anhui University
文摘In this paper, we investigate the nonparametric regression model based on ρ-mixing errors, which are stochastically dominated by a nonnegative random variable. Weobtain the convergence rate for the weighted estimator of unknown function g(x) in pth-mean, which yields the convergence rate in probability. Moreover, an example of the nearestneighbor estimator is also illustrated and the convergence rates of estimator are presented.
基金Supported by National Science Foundation of China(30970187)~~
文摘[Object]To providing new data for phylogenesis of Bangia atropurpurea by the sequencing of internal transcribed spacer(ITS region)of rDNA.[Method]B.atropurpurea was collected from Niangziguan Spring in Shanxi,the DNA was extracted and the primers were designed for PCR amplification so as to obtain ITS gene sequence.[Result]The homology of ITS region between B.atropurpurea and Porphyra oligospermatangia was 75%,which was 79% between B.atropurpurea and P.yezoensis.[Conclusion]Compared with other genes,the ITS sequence had a greater evolution rate.The differences in classification and distribution resulted in the sequence diversity.
基金A part of the results of the Project cosponsored by the Natural Scienee Fundation of China(49070127)the Chinese Academy of Geological Sciences(B8901)
文摘On the basis of the records of strong seismic events taking place in soft carbonate sediments, a new seismic sequence system of vibrational liquefaction is established, which consists of a series of units, such as escaped structure of micrite veins and liquefied deformation formed in the period of seismic liquefaction, land subsidence structure after liquefaction, tsunamic hummocky and turbidite produced by seismic events, This sequence is a generalization and summation of field observation in vast areas, which shows the whole process of a strong seismic event and provides an unified theoretical explanation. The pattern of the seismic sequence by vibrational liquefaction provides one of correlation standards for geologists in the field to discriminate events in carbonate sequences. Based on the pattern of seismic sequence, the authors first advance a new conception of the Palaeo-Tanlu (Tancheng-Lujiang) Zone and discuss primarily its geological significations.