Analysis of the joint detection capability of the SMILE satellite and EISCAT-3D radar

The Solar wind Magnetosphere Ionosphere Link Explorer(SMILE)satellite is a small magnetosphere–ionosphere link explorer developed cooperatively between China and Europe.It pioneers the use of X-ray imaging technology to perform large-scale imaging of the Earth’s magnetosheath and polar cusp regions.It uses a high-precision ultraviolet imager to image the overall configuration of the aurora and monitor changes in the source of solar wind in real time,using in situ detection instruments to improve human understanding of the relationship between solar activity and changes in the Earth’s magnetic field.The SMILE satellite is scheduled to launch in 2025.The European Incoherent Scatter Sciences Association(EISCAT)-3D radar is a new generation of European incoherent scatter radar constructed by EISCAT and is the most advanced ground-based ionospheric experimental device in the high-latitude polar region.It has multibeam and multidirectional quasi-real-time three-dimensional(3D)imaging capabilities,continuous monitoring and operation capabilities,and multiple-baseline interferometry capabilities.Joint detection by the SMILE satellite and the EISCAT-3D radar is of great significance for revealing the coupling process of the solar wind–magnetosphere–ionosphere.Therefore,we performed an analysis of the joint detection capability of the SMILE satellite and EISCAT-3D,analyzed the period during which the two can perform joint detection,and defined the key scientific problems that can be solved by joint detection.In addition,we developed Web-based software to search for and visualize the joint detection period of the SMILE satellite and EISCAT-3D radar,which lays the foundation for subsequent joint detection experiments and scientific research.

The First Global Map of Atmospheric Ammonia(NH_(3)) as Observed by the HIRAS/FY-3D Satellite

Atmospheric ammonia(NH_(3)) is a chemically active trace gas that plays an important role in the atmospheric environment and climate change. Satellite remote sensing is a powerful technique to monitor NH_(3) concentration based on the absorption lines of NH_(3) in the thermal infrared region. In this study, we establish a retrieval algorithm to derive the NH_(3)column from the Hyperspectral Infrared Atmospheric Sounder(HIRAS) onboard the Chinese Feng Yun(FY)-3D satellite and present the first atmospheric NH_(3) column global map observed by the HIRAS instrument. The HIRAS observations can well capture NH_(3) hotspots around the world, e.g., India, West Africa, and East China, where large NH_(3) emissions exist. The HIRAS NH_(3) columns are also compared to the space-based Infrared Atmospheric Sounding Interferometer(IASI)measurements, and we find that the two instruments observe a consistent NH_(3) global distribution, with correlation coefficient(R) values of 0.28–0.73. Finally, some remaining issues about the HIRAS NH_(3) retrieval are discussed.

Estimation of leaf area index from high resolution ZY-3 satellite imagery in a catchment dominated by Larix principis-rupprechtii,northern China

Leaf area index(LAI) is a key factor that determines a forest ecosystem's net primary production and energy exchange between the atmosphere and land surfaces.LAI can be measured in many ways, but there has been little research to compare LAI estimated by different methods. In this study, we compared the LAI results from two different approaches, i.e., the dimidiate pixel model(DPM) and an empirical statistic model(ESM) using ZY-3 high-accuracy satellite images validated by field data. We explored the relationship of LAI of Larix principis-rupprechtii Mayr plantations with topographic conditions. The results show that DPM improves the simulation of LAI(r = 0.86,RMSE = 0.57) compared with ESM(r = 0.62, RMSE =0.79). We further concluded that elevation and slope significantly affect the distribution of LAI. The maximum peak of LAI appeared at an aspect of east and southeast at an elevation of 1700–2000 m. Our results suggest that ZY-3 can satisfy the needs of quantitative monitoring of leaf area indices in small-scale catchment areas. DPM provides a simple and accurate method to obtain forest vegetation parameters in the case of non-ground measurement points.

Comparison between Plane and Stereo Block Adjustment for ZY-3 Satellite Images

Block adjustment for satellite images cannot be solved with weak convergence geometric conditions,therefore a plane block adjustment method to improve the targeting precision of images is proposed utilizing DEM as height constraint plane block adjustment method.First,a rational function model with affine transformation is selected as the mathematical model of the satellite image plane block adjustment.Second,to update the ground coordinates of tie points(TPs),the plane coordinates of TPs are only solved in the adjustment process.Elevation values are obtained by using DEM interpolation.Finally,the plane coordinates of all TPs and orientation parameters of all satellite images are solved through plane block adjustment with a few ground control points ZY-3 nadir images for two regions are tested for plane block adjustment while ZY-3 forward-nadir-back images of the same two regions are tested for stereo block adjustment.A comparison indicates that almost the same accuracy can be obtained with plane block adjustment support using a 1∶50 000 DEM and stereo block adjustment for ZY-3 images.For ZY-3 nadir images,almost no loss of plane block adjustment accuracy occurred when global DEM with 1 km grid and SRTM with 90 m grid replaced the 1∶50 000 DEM as elevation control,.Test results demonstrate the effectiveness and feasibility of the plane block adjustment method.

LM-4B Rocket Launches the ZY-3 Satellite

At 11:17 on January 9,a LM-4B carrier rocket lifted off from the Taiyuan Satellite Launch Center,sending the first high-precision civilian stereo mapping satellite of China,Ziyuan 3 (ZY-3),into its preset orbit,marking the first launch mission of 2012 a success.A small satellite of Luxembourg,VesselSat-2,was launched aboard the LM-4B as well.The ZY-3 satellite weighs 2650kg with a design lifetime of 5 years.The satellite was built to acquire rapidly

FY-3 Meteorological Satellites and the Applications

FY-3 is the second generation polar-orbiting meteorological satellite of China. The first satellite named FY-3A of this series was launched on 27 May 2008. The first operational satellite named FY-3C of this series was launched on 23 September, 2013. The new generation satellites are to provide three-dimensional, quantitative, multi-spectral global remote sensing data under all weather conditions, which will greatly help the operational numerical weather prediction, global climate change research, climate diagnostics and prediction, and natural disaster monitoring. They will also provide help for many other fields such as agriculture, forestry, oceanography and hydrology. With the above-mentioned capability, the FY-3 satellites can make valuable contributions to improving weather forecasts, global natural-disaster and environmental monitoring.

FY-3E:The First Operational Meteorological Satellite Mission in an Early Morning Orbit

Fengyun-3 E(FY-3E),the world’s first early-morning-orbit meteorological satellite for civil use,was launched successfully at the Jiuquan Satellite Launch Center on 5 July 2021.The FY-3E satellite will fill the vacancy of the global early-morning-orbit satellite observation,working together with the FY-3C and FY-3D satellites to achieve the data coverage of early morning,morning,and afternoon orbits.The combination of these three satellites will provide global data coverage for numerical weather prediction(NWP)at 6-hour intervals,effectively improving the accuracy and time efficiency of global NWP,which is of great significance to perfect the global earth observing system.In this article,the background and meteorological requirements for the early-morning-orbit satellite are reviewed,and the specifications of the FY-3E satellite,as well as the characteristics of the onboard instrumentation for earth observations,are also introduced.In addition,the ground segment and the retrieved geophysical products are also presented.It is believed that the NWP communities will significantly benefit from an optimal temporal distribution of observations provided by the early morning,mid-morning,and afternoon satellite missions.Further benefits are expected in numerous applications such as the monitoring of severe weather/climate events,the development of improved sampling designs of the diurnal cycle for accurate climate data records,more efficient monitoring of air quality by thermal infrared remote sensing,and the quasicontinuous monitoring of the sun for space weather and climate.

Assimilation of Feng-Yun-3B Satellite Microwave Humidity Sounder Data over Land

The ECMWF has been assimilating Feng-Yun-3B （FY-3B） satellite microwave humidity sounder （MWHS） data over ocean in an operational forecasting system since 24 September 2014, It is more difficult, however, to assimilate microwave observations over land and sea ice than over the open ocean due to higher uncertainties in land surface temperature, surface emissivity and less effective cloud screening. We compare approaches in which the emissivity is retrieved dynamically from MWHS channel l [150 GHz （vertical polarization）] with the use of an evolving emissivity atlas from 89 GHz observations from the MWHS onboard NOAA and EUMETSAT satellites. The assimilation of the additional data over land improves the fit of short-range forecasts to other observations, notably ATMS （Advanced Technology Microwave Sounder） humidity channels, and the forecast impacts are mainly neutral to slightly positive over the first five days. The forecast impacts are better in boreal summer and the Southern Hemisphere. These results suggest that the techniques tested allow for effective assimilation of MWHS/FY-3B data over land.

Overview of Chinese First C Band Multi-Polarization SAR Satellite GF-3

The GF-3 satellite, the first C band and multi-polarization Synthetic Aperture Radar(SAR) satellite in China, achieved breakthroughs in a number of key technologies such as multi-polarization and the design of a multiimaging mode, a multi-polarization phased array SAR antenna, and in internal calibration technology. The satellite technology adopted the principle of "Demand Pulls, Technology Pushes", creating a series of innovation firsts, reaching or surpassing the technical specifications of an international level.

FY-3A SATELLITE MICROWAVE DATA ASSIMILATION EXPERIMENTS IN TROPICAL CYCLONE FORECAST

China's new generation of polar-orbiting meteorological satellite FY-3A was successfully launched on May 26,2008,carrying microwave sounding devices which had similar performance to ATOVS of NOAA series.In order to study the application of microwave sounding data in numerical prediction of typhoons and to improve typhoon forecasting,we assimilated data directly for numerical forecasting of the track and intensity of the 2009 typhoon Morakot(0908)based on the WRF-3DVar system.Results showed that the initial fields of the numerical model due to direct assimilation of FY-3A microwave sounding data was improved much more than that due to assimilation of conventional observations alone,and the improvement was especially significant over the ocean,which is always without conventional observations.The model initial fields were more reasonable in reflecting the initial situation of typhoon circulation as well as temperature and humidity conditions,and typhoon central position at sea was also adjusted.Through direct 3DVar assimilation of FY-3A microwave data,the regional mesoscale model improves the forecasting of typhoon track.Therefore,the FY-3A microwave data could efficiently improve the numerical prediction of typhoons.

A Parallel Discrete Event Simulation Engine for the Low-Earth-Orbit Satellite Constellation Networks

Low-Earth-Orbit satellite constellation networks(LEO-SCN)can provide low-cost,largescale,flexible coverage wireless communication services.High dynamics and large topological sizes characterize LEO-SCN.Protocol development and application testing of LEO-SCN are challenging to carry out in a natural environment.Simulation platforms are a more effective means of technology demonstration.Currently available simulators have a single function and limited simulation scale.There needs to be a simulator for full-featured simulation.In this paper,we apply the parallel discrete-event simulation technique to the simulation of LEO-SCN to support large-scale complex system simulation at the packet level.To solve the problem that single-process programs cannot cope with complex simulations containing numerous entities,we propose a parallel mechanism and algorithms LP-NM and LP-YAWNS for synchronization.In the experiment,we use ns-3 to verify the acceleration ratio and efficiency of the above algorithms.The results show that our proposed mechanism can provide parallel simulation engine support for the LEO-SCN.

The first quantitative remote sensing of ocean internal waves by Chinese GF-3 SAR satellite

Quantitative analysis and retrieval is given by the State Key Laboratory of Satellite Ocean Environment Dynamics（SOED）,Second Institute of Oceanography（SIO）,State Oceanic Administration（SOA）,China,from the first batch of GF-3 synthetic aperture radar（SAR）data with ocean internal wave features in the Yellow Sea.

Comparative investigation of microstructure and high-temperature oxidation resistance of high-velocity oxy-fuel sprayed CoNiCrAlY/nano-Al_(2)O_(3) composite coatings using satellited powders

Satellited CoNiCrAlY–Al_(2)O_(3)feedstocks with 2wt%, 4wt%, and 6wt% oxide nanoparticles and pure CoNiCrAlY powder were deposited by the high-velocity oxy fuel process on an Inconel738 superalloy substrate. The oxidation test was performed at 1050℃ for 5, 50, 100,150, 200, and 400 h. The microstructure and phase composition of powders and coatings were characterized by scanning electron microscopy and X-ray diffraction, respectively. The bonding strength of the coatings was also evaluated. The results proved that with the increase in the percentage of nanoparticles(from 2wt% to 6wt%), the amount of porosity(from 1vol% to 4.7vol%), unmelted particles, and roughness of the coatings(from 4.8 to 8.8 μm) increased, and the bonding strength decreased from 71 to 48 MPa. The thicknesses of the thermally grown oxide layer of pure and composite coatings(2wt%, 4wt%, and 6wt%) after 400 h oxidation were measured as 6.5, 5.5, 7.6, and 8.1 μm, respectively.The CoNiCrAlY–2wt% Al_(2)O_(3)coating showed the highest oxidation resistance due to the diffusion barrier effect of well-dispersed nanoparticles. The CoNiCrAlY–6wt% Al_(2)O_(3)coating had the lowest oxidation resistance due to its rough surface morphology and porous microstructure.

Chinese GF-1 and GF-3 satellites observed the giant iceberg calving off the Larsen C Ice Shelf

A massive iceberg, named A-68 by National Ice Center （NIC） officially, calved away from the Larsen C Ice Shelf in Antarctica on luly 12, 2017. The iceberg A-68 is about 5 800 km2, weighs more than a trillion tons and it is one of the biggest ever recorded icebergs. Chinese satellites Gaofen-1 （GF-1） and Gaofen-3 （GF-3） data was used to monitoring the propagation of the rift and the iceberg by National Satellite Ocean Application Service （NSOAS）.

Fitting of magnetic measurements of Swarm satellites based on 3D surface spline model

This study utilizes the 62208000 Swarm satellite data to establish a high-precision main magnetic field at the height of the satellites in China and its adjacent regions.The CHAOS-6 model is used to remove the crustal and external fields and obtain 2788 main field grid data.We use the main field grid data to build a three-dimensional(3D)surface spline(3DSS)model of the satellite altitude in China.Other regional models(namely the 3D,two-dimensional(2D)Taylor,and 2D surface spline models)and the CHAOS-6 model are employed to model and analyze the same region.The results show that the 3DSS model can represent a good fi tting for the northward(X)and eastward(Y)components and the total intensity(F).This model demonstrates the most stable results for the 20 points that did not take part in the modeling.Compared with the other three regional models,the root–mean–square error values and the average residuals of the new model are approximately 65%and 69%lower for each component,respectively.This study does not rely on ground station data to derive a more accurate regional main fi eld model.The results further show that less data height difference and high-density data distributions greatly improve the regional model accuracy.The new model has a certain application value to related space geophysics,such as in spatial positioning and navigation,and to the study of regional magnetic anomalies.

Integrating Highly Spatial Satellite Image for 3D Buildings Modelling Using Geospatial Algorithms and Architecture Environment

The growing demand for current and precise geographic information that pertains to urban areas has given rise to a significant interest in digital surface models that exhibit a high level of detail. Traditional methods for creating digital surface models are insufficient to reflect the details of earth’s features. These models only represent three-dimensional objects in a single texture and fail to offer a realistic depiction of the real world. Furthermore, the need for current and precise geographic information regarding urban areas has been increasing significantly. This study proposes a new technique to address this problem, which involves integrating remote sensing, Geographic Information Systems (GIS), and Architecture Environment software environments to generate a detailed three-dimensional model. The processing of this study starts with: 1) Downloading high-resolution satellite imagery; 2) Collecting ground truth datasets from fieldwork; 3) Imaging nose removing; 4) Generating a Two-dimensional Model to create a digital surface model in GIS using the extracted building outlines; 5) Converting the model into multi-patch layers to construct a 3D model for each object separately. The results show that the 3D model obtained through this method is highly detailed and effective for various applications, including environmental studies, urban development, expansion planning, and shape understanding tasks.

Algorithm for the Sea Surface Wind Imaging Products of Fengyun-3C Meteorological Satellite MWRI

This paper analyzes the sea surface backward thermal radiation data in the China Sea observed by the mmwave channel of FY3 MWRI, explains the reason for which the analysis method combined with multiple mmwave channels is conducive to wind inversion, uses the complex model of the two-scale randomly rough surface with foam scattering layer to calculate the backward heat emission, analyzes the different response characteristics of the thermal radiation characteristics of each channel with the change of the sea surface wind speed, and establishes the wind speed inversion model applying to the microwave radiometer, achieving better results than in previous studies. The sea surface medium-low wind speed precision standard deviation of new model reaches 1.2 m/s (0 - 15 m/s);the inversion strong wind data are consistent with the island fixed buoys data, and the global sea surface wind speed image schematic diagram is given.

ALM-3B Launches Tianlian 2-01 Satellite

China launched the Tianlian 2-01 satellite on a LM-3B carrier rocket from the Xichang Satellite Launch Center at 23:51Beijing time on March 31,2019.Then the satellite entered its Geosynchronous Transfer Orbit(GTO).

Application of Medium-Voltage Fully-Regulated High-Power EPS on the BDS-3 Satellites

China’s BeiDou Navigation Satellite System(BDS)construction has been completed and the system has been formally commissioned.Most of the Electric Power Systems(EPSs)for MEO satellites were developed by the Shanghai Institute of Space Power-sources.The 42 V medium-voltage fully-regulated high-power EPS has been adopted for the first time in medium Earth orbit,with an output power reaching about 3 kW.Compared with the 42 V medium-voltage semi-regulated bus power system used in the Regional Navigation BDS-2 satellite,the EPS of the BDS-3 MEO satellites has increased power by about 80%,adopting many newly developed products such as high-efficient triple junction GaAs solar cells,high-energy-density lithium ion batteries and a high-efficient autonomous power control unit(PCU).Based on the studies on the medium-voltage fully-regulated and high-power EPS technical principles,and the adaptability and reliability of various working modes,the test verifications for the EPS were conducted both on the ground and in orbit.Compared with other global navigation satellite systems such as GPS,Galileo and GLONASS,the EPS of the BDS-3 MEO satellite has a long design life time which is equivalent to that of the GPS and Galileo,but with a larger power supply capability and power ratio,distinguishing its advancement in the field of satellite power technology.

移动新架构 3D新视界 东芝Satellite A660

随《阿凡达》的一炮走红，现在的好莱坞大片普遍都要打上3D的噱头增加卖点。可现实影院中大部分3D影片的效果都不尽如人意，特别是在色彩与对比度上明显不如普通影片好，打击了众多影迷的积极性。如果是影院的3D效果不好，你有没有想过自己在家组建3D影院呢。不用太复杂，东芝最新推出的SatelliteA660（以下简称A660）笔记本电脑不仅能让你在家独享3D大片的精彩，而且还能体验逼真的3D游戏。