山海文化浸润下的内职班“三混合”培养模式管理探析--以连云港中等专业学校为例

举办内职班是改变新疆基础教育薄弱、加快经济发展、增进民族团结的重要举措。江苏省连云港中等专业学校坚决铸牢中华民族共同体意识,从"山海文化"德育品牌入手,弘扬民族团结文化和连云港区域文化,打造"山海铸风骨,大德行天下"的德育模式,积极推进内职班学生与本地学生"三混合"管理培养模式,在交往中加深了解,在交流中取长补短,在交融中和谐共赢,发挥校园文化的作用,致力于培养具有山海情怀的高素质劳动者和技术技能型人才。

中职《英语》“三+三”混合式教学模式的设计原则——以《Sorting refuse》为例

中职生英语学习痛点是对学习兴趣不高、单词记不住,句型不会用,资源匮乏。为解决存在问题,我们采用“三+三”混合式教学模式教学。实现这个模式下的高效教学有三个重要途径:资源、活动、评价。这三个途径贯穿课前、课中和课后三个教学阶段。这种教学模式使中职英语教学高效、学生爱学、易记、评价客观。

“三段六步四融合”高职高等数学教学模式创新实践

随着互联网技术与网络设备的飞快发展,教育教学发生了翻天覆地的变化。传统教学向数字化、智能化新型教学模式发展。针对高等数学的抽象性、难理解等特点和教学现状,迫切需要结合互联网、智能移动设备、智慧教育平台等现代化技术的智慧课堂改进高等数学传统教学模式。尝试以学生为中心,采用“PDI三段六步四融合”的线上线下混合式教学模式,探索高职院校《高等数学》课程的教学改革,以期为高职院校公共基础课程提供可参考的改革模式,提升高职院校的教育教学质量。教学实践结果表明:利用泛雅网络教学平台,建构智慧学习环境,实施“PDI三段六步四融合”的线上线下混合式教学模式;该模式能够显著提高高职院校学生的自主学习能力,激发学生内在的原动力,提高学生的学习效能,提高《高等数学》课程的教学质量。

基于颗粒化资源的在线课程开发与实践——以浮法玻璃生产技术课程为例

玻璃行业具有自己的生产特点,在教育信息化时代,职业教育玻璃专业数字化教学资源的匮乏影响了其信息化教学的实现。本文以浮法玻璃生产技术课程为例,介绍了颗粒化资源的开发和建设,提出了多元适用性浮法玻璃生产技术课程组建模式及"三阶段"线上线下混合式教学模式,对于促进玻璃行业职业教育对接,引领产业发展,推进信息技术与教育教学深度融合,具有重要的理论和现实意义及应用推广价值。

Relationship between repeated triaxial test and Hamburg wheel tracking test on asphalt mixtures

Both the repeated triaxial test （RTT） and the Hamburg wheel tracking test （HWTT） are adopted to evaluate the high temperature performance of the stone mastic asphalt （SMA） and the mastic asphalt （MA）. The correlation of the permanent deformations of the MA and the correlation of the deformation developments of the SMA between the two tests are analyzed, respectively. Results show that both the two tests can effectively identify the high temperature performance of mixtures, and the correlation between the final results of the two tests as well as that between the deformation developments of the two tests are excellent with R20.9. In order to further prove the correlation, viscoelastic parameters estimated from the RTT results is used to simulate the rutting development in the HWTT slabs by the finite element method （FEM）. Results indicate that the correlation between the two tests is significant with errors less than 10%. It is suitable to predict the rutting development with the viscoelastic parameters obtained from the RTT.

智慧课堂理念下高职产品设计类课程的教学设计与实践探索——以《服饰电脑刺绣设计》课程为例

在智慧课堂的理念下,将基于OBE-CDIO的“三融合”混合教学模式应用于高职产品设计类专业课程,以“定制刺绣衬衫设计与制作”为例,通过对学生的学情分析,将教学分为课前、课中及课后,依靠学习通云平台、智慧教室、智能虚拟系统等实现“线上线下、课内课外、校内校外”相融合的教学改革,学生学习习惯变为主动性学习,提高了学习效果。

DEVELOPMENT OF A HYBRID MODEL FOR THREE-DIMENSIONAL GIS

This paper presents a hybrid model for three-dimensional Geographical Information Systems which is an integration of surface- and volume-based models. The Triangulated Irregular Network (TIN) and octree models are integrated in this hybrid models. The TIN model works as a surface-based model which mainly serves for surface presentation and visualization. On the other hand, the octree encoding supports volumetric analysis. The designed data structure brings a major advantage in the three-dimensional selective retrieval. This technique increases the efficiency of three-dimensional data operation.

Interaction Between Large-scale Vortex Structure and Dispersed Particles in a Three Dimensional Mixing Layer

In order to understand the interaction between large-scale vortex structure and particles, a two-way coupling temporal mixing layer laden with particles at a Stokes number of 5 with different mass loading planted initially in the upper half region is numerically studied. The pseudospectral method is used for the flow fluid and the Lagrangian approach is employed to trace particles. The momentum coupling effect introduced by a particle is approximated to a point force. The simulation results show that the coherent structures are still dominant in the mixing layer, but the large-scale vortex structure and particle dispersion are modulated. The length of large-scale vortex structure is shortened and the pairing is delayed. At the same time, the particles are distributed more evenly in the whole flow field as the mass loading is increased, but the particle dispersion along the transverse direction differs from that along the spanwise direction, which indicates that the effect by the addition of particle on the spanwise large-scale vortex structure is different from the streamwise counterpart.

Energy conserving effects of dividing wall column

The energy-conserving performance of dividing wall column(DWC) is discussed in this paper. The heat transfer through the dividing wall is considered and the results are compared with that of common heat insulation dividing wall column(HIDWC). Based on the thermodynamic analysis of heat transfer dividing wall column(HTDWC) and HIDWC, both computer simulation and experiments are employed to analyze the energyconserving situation. Mixtures of n-hexane, n-heptane and n-octane are chosen as the example for separation.The results show that the energy consumption of HTDWC is 50.3% less than that of conventional distillation column, while it is 46.4% less than that of HIDWC. It indicates that DWC is efficient on separating threecomponent mixtures and HTDWC can save more energy than HIDWC. Thus it is necessary to consider the heat transfer while applying DWC to industry.

Separation process of butanol-butyl acetate-methyl isobutyl ketone system by the analysis to residual curve and the double effect pressure-swing distillation

The separation of ternary mixture of butanol, butyl acetate, and methyl isobutyl ketone(MIBK) was initially analyzed by the residual curve. In this process, MIBK was chosen as the azeotropic agent during the first step of separation. The optimum mass ratio of extra MIBK was 1.6 in the modified feed stream according to the residual curve. Thus on this condition the top product was butanol-MIBK azeotrope while the bottom product was butyl acetate in the preliminary separation of the mixture. Then the butanol and MIBK azeotrope was separated by the double effect pressureswing distillation with the low pressure column performing at 30 kPa and the atmospheric pressure column at 101 kPa. The optimal operating conditions were then obtained by using Aspen Plus to simulate and optimize the process. The results showed that the mass purities of butanol, butyl acetate, and MIBK were all more than 99% and reached the design requirements. Additionally, compared with the traditional distillation with outside heating, the double effect pressure swing distillation saved the reboiler duty by 48.6% and the condenser duty by 44.6%.

Robust Multiparty Quantum Secret Key Sharing Over Two Collective-Noise Channels via Three-Photon Mixed States

We present a robust （n, n）-threshold scheme for multiparty quantum secret sharing of key over two collectivenoise channels （i.e., the collective dephasing channel and the collective rotating channel） via three-photon mixed states, In our scheme, only if all the sharers collaborate together can they establish a joint key with the message sender and extract the secret message from the sender＇s encrypted message. This scheme can be implemented using only a Bell singlet, a one-qubit state and polarization identification of single photon, so it is completely feasible according to the present-day technique.

Solubility of Paclitaxel in Mixtures of Dichloromethane and Supercritical Carbon Dioxide

Phase behavior of paclitaxel in solvent mixtures of dichloromethane and supercritical carbon dioxide was investigated using a supercritical phase monitor.Cloud point pressures were determined as a function of temperature,pressure and paclitaxel content from 313.1 to 343.1K and pressures up to 33.52 MPa.The ternary mixtures exhibit a typical lower critical solution temperature behavior.When paclitaxel content increases,the single-phase region shrinks in size.Three cubic equations of state(Redlich-Kworng,Soave-Redlich-Kwong and Peng-Robinson equation of state) coupled with the van der Waals one-fluid mixing rules were selected to correlate the experimental data.The results indicate that SRK EOS coupled with two binary interaction parameters kij and lij can predict paclitaxel solubility for the best fit of experimental data.

Numerical Investigation on Effect of Vapor Split Ratio to Performance and Operability for Dividing Wall Column

Operability problem of dividing wall column (DWC) raised by vapor split was investigated by numerically analyzing four cases defined by different compositions of a three-component mixture. DWCs were firstly designed for each case by optimizing the vapor split to the two sides of the dividing wall, and then their feasibilities and total annual costs in operation were evaluated against different vapor split ratios. The analysis on the operability of the DWC for four cases was made based on two scenarios: (1) vapor split is shifted by the vapor resistance difference between the column sections in the two sides of the dividing wall and (2) the feed composition is changed. It was demonstrated that the positioning of the dividing wall and the decision on the vapor split may affect significantly the operability of a DWC.

Predictions of friction and flash temperature in marine gears based on a 3D line contact mixed lubrication model considering measured surface roughness

Wear and scuffing failures often occur in marine transmission gears due to high friction and flash temperature at the interface between the meshing-teeth.In this paper,a numerical solution procedure was developed for the predictions of transient friction and flash temperature in the marine timing gears during one meshing circle based on the 3D line contact mixed lubrication simulation,which had been verified by comparing the flash temperature with those from Blok’s theory.The effect of machined surface roughness on the mixed lubrication characteristics is studied.The obtained results for several typical gear pairs indicate that gear pair 4-6 exhibits the largest friction and the highest interfacial temperature increase due to severe rough surface asperity contacts,while the polished gear surfaces yield the smallest friction and the lowest interfacial temperature.In addition,the influences of the operating conditions and the gear design parameters on the friction-temperature behaviors are discussed.It is observed that the conditions of heavy load and low rotational velocity usually lead to significantly increased friction and temperature.In the meantime,by optimizing the gear design parameters,such as the modulus and the pressure angle,the performance of interfacial friction and temperature can be significantly improved.

Prediction of Phase Behavior for Styrene/CO2/Polystyrene Mixtures

A lattice fluid model, Sanchez-Lacombe equation, is used to predict the phase behavior for a styrene/CO2/polystyrene ternary sys-tem. The binary parameters involved in the equation were optimized using experimental data. Phase diagrams and the distribution coefficients of styrene between polymer phase and fluid phase are obtained over a wide range of pressure, temperature and composition. The analysis of ter-nary phase diagrams indicates that this system at relatively high pressure or low temperature may display two-phase equilibrium, and at low pressures or high temperatures three-phase equilibrium may appear. The distribution coefficients of styrene between the fluid phase and the polymer phase increase asymptotically to unity when the concentration of styrene increases. The results provide thermodynamic knowledge for further exploitation of supercritical carbon dioxide assisted devolatilization and impregnation.

Prediction of Critical Endpoints Based on the PR Equation of State

In the design of chemical processes,such as catalytic cracking of bitumen and heavy oil,the knowledge of phase behavior at the critical endpoint is essential.Based on the PR equation of state,the algorithm developed by Heidemann and Khalil for calculating critical properties was used to compute critical points.An algorithm for determining the equilibrium phase of the critical point using the tangent plane criterion was developed,and was used to calculate the critical endpoints of different mixtures,including non-polar,polar and associating systems.The critical endpoint,representing the type of the phase behavior,was employed to fit the interaction parameter of mixtures in critical state at high pressure.Lines of critical endpoints for ternary mixtures were also determined with the algorithm.

Determination Method for Shear Strength Parameters of Rock-Soil Mixtures Using Close-Range Photogrammetry and 3-D Limit Equilibrium Theory

Using a combination of close-range photogrammetry and three-dimensional(3-D) limit equilibrium theory, a determination method for the shear strength parameters of rock-soil mixture is presented. A close-range photogrammetry method is used for measurement of the 3-D terrain of the experimental target. Auto CAD Lisp and EXCEL VBA are used to perform 3-D limit equilibrium analysis of the stability of sliding mass and perform backanalysis of shear strength parameters. The presented method was used to determine the shear strength parameters of rock-soil mixtures at the Liyuan Hydropower Station. The 3-D terrain of sliding surface could be measured notably well using of closerange photogrammetry. The computed results reveal that the cohesion and friction angle of rock-soil mixtures were 3.15 k Pa and 29.88o for test A, respectively, and 4.43 k Pa and 28.30o for test B, respectively, within the range of shear strength parameters, as determined by field and laboratory tests. The computation of shear strength parameters is influenced by the mesh grid number, especially the cohesion of the rock-soil mixture. The application of close-range photogrammetry can reduce the siteworks and improve the computational efficiency and accuracy.

Introduction and evaluation of a novel hybrid brattice for improved dust control in underground mining faces: A computational study

A proper control and management of dust dispersion is essential to ensure safe and productive underground working environment. Brattice installation to direct the flow from main shaft to the mining face was found to be the most effective method to disperse dust particle away from the mining face. However,it limits the movement and disturbs the flexibility of the mining fleets and operators at the tunnel. This study proposes a hybrid brattice system- a combination of a physical brattice together with suitable and flexible directed and located air curtains- to mitigate dust dispersion from the mining face and reduce dust concentration to a safe level for the working operators. A validated three-dimensional computational fluid dynamic model utilizing Eulerian–Lagrangian approach is employed to track the dispersion of dust particle. Several possible hybrid brattice scenarios are evaluated with the objective to improve dust management in underground mine. The results suggest that implementation of hybrid brattice is beneficial for the mining operation: up to three times lower dust concentration is achieved as compared to that of the physical brattice without air curtain.

Hybrid absorbing boundary condition for threedimensional elastic wave modeling

Edge reflections are inevitable in numerical modeling of seismic wavefields, and they are usually attenuated by absorbing boundary conditions. However, the commonly used perfectly matched layer （PML） boundary condition requires special treatment for the absorbing zone, and in three-dimensional （3D） modeling, it has to split each variable into three corresponding variables, which increases the computing time and memory storage. In contrast, the hybrid absorbing boundary condition （HABC） has the advantages such as ease of implementation, less computation time, and near-perfect absorption; it is thus able to enhance the computational efficiency of 3D elastic wave modeling. In this study, a HABC is developed from two-dimensional （2D） modeling into 3D modeling based on the I st Higdon one way wave equations, and a HABC is proposed that is suitable for a 3D elastic wave numerical simulation. Numerical simulation results for a homogenous model and a complex model indicate that the proposed HABC method is more effective and has better absorption than the traditional PML method.

Extraction of germanium(IV) from acid leaching solution with mixtures of P204 and TBP

Solvent extraction experiments were conducted from acidic solutions containing germanium（IV） and other metal ions, such as Ga3＋, Fe3＋, Zn2＋ and Fe2＋ in hydrometallurgical process of zinc. The purpose of this work was to enhance the efficiency of the extraction and stripping processes and the selectivity of germanium and other metals, while making the method as simple as possible. Germanium was recovered from sulfuric acid, using di-（2-ethylhexyl） phosphoric acid （P2O4） as an extractant, tributyl phosphate （TBP） as modifier diluted in sulfonate kerosene and stripped by NaOH aqueous solution. Extraction studies were carried out under different acid concentrations and solvent concentrations, and optimized conditions were determined. The numbers of stages required for extraction and stripping of metal ions were determined from the McCabe-Thiele plot. The results show that the extracting and stripping efficiencies are 94.3% and 100%, respectively, through two-stage extraction and two-stage strip. Moreover, the synergistic effect of TBP on the system P2O4/kerosense/Ge4＋ is revealed with respect to the extraction of germanium.