模糊聚类分析在优选小麦“三系”杂交组合中的应用

运用模糊聚类方法讨论小麦"三系"杂交组合的选种问题，找出最佳配种，从而收到最好经济效益。

金融加速器视角下保障房地产市场平稳发展的政策研究

房地产行业是目前中国经济金融风险形成、传染与扩散的主要场域之一,然而现有文献对房地产行业债务风险的机制研究尚不充分,基于中国情境的本土化研究则更为匮乏。本文将经典金融加速器理论与中国房地产市场特征现实相结合,首先提出了房企债务的抵押贷款、融资溢价和预售回款三重加速机制。其次剖析了金融加速器视角下“三支箭”政策组合的作用路径及现存问题。最后本文立足于保障房地产市场平稳发展的长期目标,从三个方面提出了针对性政策建议:健全多领域多维度政策支持,确保“三支箭”政策落地见效;增加跨周期调节元素,实现从短期应急纾困向长期平稳发展的目标过渡;完善逆周期调节机制,提升房地产市场调控政策的科学性和前瞻性。

Effect of B_2O_3 on microstructures and mechanical properties of cast Mg-Al-Ti-B alloys

The Mg-Al-Ti-B alloy prepared by mechanical alloying is poor in microstructural uniformity and compactness. In order to improve the microstructural uniformity and compactness of Mg-Al-Ti-B alloy and thus to improve the mechanical properties, effect of B2O3 on microstructure and mechanical properties of cast Mg-9Al-6Ti alloy was studied by optical microscopy, scanning electron microscopy, X-ray diffraction and mechanical property testing. The results show that due to the addition of B2O3, the average grain size of Mg-Al-Ti-B alloys is refined to 12μm, dispersed Ti phases completely disappear, the amount of precipitation phase Mgl7All2 is reduced and TiA13 is increased, and new phases MgB6 and TiaB4 are precipitated. The average hardness, average tensile strength, yield strength and elongation of the alloy are HV 77.1, 171.2 MPa, 113.5 MPa and 5.2%, respectively.

Performance analysis in 3G/ad hoc integrated network

An analytical approach to evaluate the performance of the 3G/ad hoc integrated network is presented. A channel model capturing both path loss and shadowing is applied to the analysis so as to characterize power falloff vs. distance. The 3G/ad hoc integrated network scenario model is introduced briefly. Based on this model, several performances of the 3G/ ad hoc integrated network in terms of outage probability, call dropping probability and new call blocking probability are evaluated. The corresponding performance formulae are deduced in accordance with the analytical models. Meanwhile, the formula of the 3G/ad hoc integrated network capacity is deduced on the basis of the formula of the outage probability. It is observed from extensive simulation and numerical analysis that the 3G/ad hoc integrated network remarkably outperforms the 3G network with regards to the network performance. This derived evaluation approach can be applied into planning and optimization of the 3G/ad hoc network.

Numerical Investigation on Effect of Vapor Split Ratio to Performance and Operability for Dividing Wall Column

Operability problem of dividing wall column (DWC) raised by vapor split was investigated by numerically analyzing four cases defined by different compositions of a three-component mixture. DWCs were firstly designed for each case by optimizing the vapor split to the two sides of the dividing wall, and then their feasibilities and total annual costs in operation were evaluated against different vapor split ratios. The analysis on the operability of the DWC for four cases was made based on two scenarios: (1) vapor split is shifted by the vapor resistance difference between the column sections in the two sides of the dividing wall and (2) the feed composition is changed. It was demonstrated that the positioning of the dividing wall and the decision on the vapor split may affect significantly the operability of a DWC.

A Fast Image Matching Algorithm Using a Combination of Line Segment Features

The scene matching navigation is a research focus in the field of autonomous navigation,but the real-time performance of image matching algorithm is difficult to meet the needs of real navigation systems.Therefore,this paper proposes a fast image matching algorithm.The algorithm improves the traditional line segment extraction algorithm and combines with the Delaunay triangulation method.By combining the geometric features of points and lines,the image feature redundancy is reduced.Then,the error with confidence criterion is analyzed and the matching process is completed.The simulation results show that the proposed algorithm can still work within 3°rotation and small scale variation.In addition,the matching time is less than 0.5 s when the image size is 256 pixel×256 pixel.The proposed algorithm is suitable for autonomous navigation systems with multiple feature distribution and higher real-time requirements.

厚层软基高填路堤的施工技术

通过工程实例提出在厚层软基路堤施工中,采用三加一(袋装砂井、砂垫层、土工布并辅以超载预压)组合方案进行加固处理,薄层轮回加载方式填筑路堤,快速安全完成软土路基施工。

Effects of temperature and time on three-dimensional microstructural evolution of semi-solid 2A14 aluminum alloy during short process preparation of semi-solid billets

To shorten the preparation process of semi-solid billets,semi-solid billets of 2A14 aluminum alloy were prepared by wrought aluminum directly semi-solid isothermal treatment(WADSSIT)process.Three-dimension(3D)combined microstructure evolution,namely transverse direction(TD)surface,rolling direction(RD)surface,and normal direction(ND)surface,was studied.Effects of temperature and holding time on average grain size and average shape factor were investigated.The results showed that the optimum conditions for preparation of 2A14 semi-solid billets by this process were 615℃ and 20 min(average grain size of 124μm and shape factor of 0.81).Electron backscatter diffraction(EBSD)observations indicated that the microstructure was completely recrystallized when it was heated to 600℃.Grain size was increased with the increase of temperature and grew up slowly with the holding time prolonging.Roundness was increased with increase of holding time but was not sensitive to temperature.

Atypical Chronic Myeloid Leukaemia with Trisomy 13: a Case Report

ATYPICAL chronic myeloid leukaemia （aCML）, which shows both myeloproliferative and mye- Iodysplastic features, is a type of myeloprolif- erative/myelodysplastic disease as defined bythe World Health Organisation （WHO） classification of the myeloid neoplasms. Because of the presence of neutrophilic leukocytosis, aCML may resemble chronic myeIogenous leukemia （CML）. However, in contrast with CML, aCML does not have the Philadelphia chromosome or the bcr/abl fusion gene.

Explanation for peat-forming environments of coal seam 2 and 9^(-2)based on the maceral composition and aromatic compounds in the Xingtai coalfield,China

Maceral composition and aromatic compounds were determined on columnsamples to study the peat-forming environments of Permian coal seam 2 and Carboniferouscoal seam 9^(-2) from the Xingtai coalfield,China.The macerals were dominated by inertinitein seam 2 and by vitrinite in seam 9^(-2).Three maceral groups were selected as indicatorsof peat-forming environments.Two triangle diagrams were drawn based on the indicatorsto explicate the peat-forming environments of permian seam 2 and Carboniferousseam 9^(-2).The results indicate that the peat of carboniferous seam 9^(-2) formed dominantlyin wet swamps,whereas the peat of Permian seam 2 formed dominantly in dry swampsand open moor environments.

Effect of three-step homogenization on microstructure and properties of 7N01 aluminum alloys

The effect of different homogenization treatments on the microstructure and properties of the 7N01 aluminum alloy was investigated using hardness measurements, electrical conductivity measurements, tensile and slow strain rate tests, electron probe microanalysis, optical microscopy, scanning electron microscopy, and transmission electron microscopy. The results revealed that three-step homogenization improved the uniformity of Zr distribution by eliminating segregation of the main alloying elements. During the second homogenization step at 350 °C for 10 h, coarse and strip-like equilibrium η phases formed which assisted the nucleation of Al3Zr dispersoids and reduced the width of the precipitate-free zone of A13Zr dispersoids. As a result, coarse recrystallization was greatly reduced after homogenization at 200 °C, 2 h ＋ 350 °C, 10 h ＋ 470 °C, 12 h, which contributed to improving the overall properties of the 7N01 aluminum alloys.

Research on Optimization wharf Structure Type of Triangle frame pier

Based on optimization wharf structure type of triangle flame pier proposed, namely＂ Spatial triangular flame pier ＋ Big span bent which taking Slant supports＂ Simulating three-dimensional pier model of a variety of conditions in the actual loading by structural finite element software. Under the guidance of the three-dimensional structure of the most unfavorable load combination algorithm, three-dimensional combination algorithm is applied to the new structure by the MATLAB software programming. Search and calculate the most unfavorable combination of action effects and the corresponding intemal force of the main member, checking the feasibility of the three-dimensional algorithms, Calculating the new wharf structure structural features and stability, Providing numerical reference for the design of this sort of wharf.

On Trivariate Copulas with Bivariate Linear Spearman Marginal Copulas

Based on the trivariate reduction technique two different trivariate Bernoulli mixtures of univariate uniform distributions and their associated trivariate copulas with bivariate linear Spearman marginal copulas are considered. Mathematical characterizations of these Bernoulli mixture models are obtained. Since Bernoulli mixture trivariate reduction copulas are not compatible with all valid grade correlation coefficients, and there exist linear Spearman compatible non-Bernoulli mixture trivariate copulas, one can ask when there exists at all a trivariate copula with given linear Spearman marginal copulas. Based on a known concordance ordering compatibility criterion, a set of grade correlation inequalities, which must necessarily be satisfied for compatibility, is derived. The existence question for trivariate copulas with compatible linear Spearman marginal copulas is settled in the main result, which states that this set of inequalities is also sufficient for compatibility. The constructive proof makes use of two new classes of trivariate copulas that are obtained from the Bernoulli mixture trivariate copulas through a natural parametric extension. Finally, the obtained classes of trivariate copulas are compared with another class that contains as special case some trivariate copulas with linear Spearman marginal copulas. Since the latter class is incompatible with some type of linear Spearman copulas, the new classes of trivariate copulas build a richer class in this respect. Moreover, in contrast to the mentioned class, which requires in general 11 different elementary copulas in the defining convex linear combination, the new classes require at most five of them, which results in a more parsimonious parametric modelling.

One-pot three-component synthesis of tetrahydrobenzo[b]pyrans catalyzed by cost-effective ionic liquid in aqueous medium

A simple and ef ficient method is proposed for the synthesis of tetrahydrobenzo[b]pyrans with aromatic aldehydes, active methylene compounds, and dimedone using basic ionic liquid catalyst in water. The procedure offers several advantages including short reaction time, good yield, easy procedure, and good recyclability of catalysts, which may be a practical alternative to conventional processes for preparation of 4-hpyrans.

Positive Solutions of Boundary Value Problem for a Coupled System of Nonlinear Third-order Differential Equations

By using cone expansion-compression theorem in this paper, we study boundary value problems for a coupled system of nonlinear third-order differential equation. Some sufficient conditions are obtained which guarantee the boundary value problems for a coupled system of nonlinear third-order differential equation has at least one positive solution. Some examples are given to verify our results.

Triangular Halogen Bond and Hydrogen Bond Supramolecular Complex Consisting of Carbon Tetrabromide, Halide, and Solvent Molecule： A Theoretical and Spectroscopic Study

The theoretical calculation and spectroscopic experiments indicate a kind of triangular three bonding supramolecular complexes CBr4…X^-…-H-C, which consist of carbon tetrabromide, halide, and protic solvent molecule （referring to dichloromethane, chloroform and acetonitrile）, can be formed in solution. The strength of halogen and hydrogen bonds in the triangular complexes using halide as common acceptor obeys the order of iodide〉bromide〉chloride. The halogen and hydrogen bonds work weak-cooperatively. Charge transfer bands of halogen bonding complexes between CBra and halide are observed in UV-Vis absorption spectroscopy in three solvents, and then the stoichiometry of 1：1, formation constants K and molar extinction coefficients ε of the halogen bonding complexes are obtained by Benesi-Hildebrand method. The K and ε show a dependence on the solvent dielectric constant and, on the whole, obey an order of iodide〉bromide〉chloride in the same solvents. Furthermore, the C-H vibrational frequencies of solvent molecules vary obviously with the addition of halide, which indicates the C-H…X- interaction. The experimental data indicate that the halogen bond and hydrogen bond coexist by sharing a common halide acceptor as predicted by calculation.

Methodology for Definition of the Three-Dimensional Geodesic Structures in the Olinda＇s Historical Site

It is shown to be a relevant study involving terrestrial methods of measurement, such as： forward and backward intersections, geometric leveling, trigonometric leveling with short distance targeted and spatial positioning GNSS methods, for the definition of field reference points and field-object points located in rough terrain. The geodesic structures were implemented in the Historic Site of Olinda employing GNSS （global navigation satellite system） receivers, total stations and digital level. The historical site of Olinda was recorded by UNESCO as Historical and Cultural Heritage of Humanity. The study area is located in the center of the busiest site with a quite roughly relief. This area has been studied since 2007 involving Research of Scientific Initiation and Pos-Graduation Course. This paper aims to present the realized experiments for the implementation and definition of geodesic structures in environments with very rough relief, including large old houses and historic monuments.

Self-assembled Carbon Nanotube/Silicone Composite Films and Their Electrical Properties for Electrical Device

Novel composites were synthesized using AEPTES （3-（2-aminoethylamino）propyltriethoxysilane）, which behaves as an excellent dispersant for MWCNTs （multiwall carbon nanotubes） in polymer film matrices. The thickness of the synthesized nanocomposite films ranged from 50 to 70 lam, having well-dispersed MWCNTs. Increasing the AEPTES concentration from 0.0196 to 0.0300 M, increased the amine content and the dispersion of MWCNTs. The film synthesized at 0.0300 M AETPES exhibited the greatest degree of dispersion among the three samples, which is consistent with a self-assembled silane group interacting with the MWCNT surface.

Invariant measure for cubic Fibonacci-like polynomials

A special class of cubic polynomials possessing decay of geometry property is studied.This class of cubic bimodal maps has generalized Fibonacci combinatorics.For maps with bounded combinatorics,we show that they have an absolutely continuous invariant probability measure.